Hunter 23566 Owner's Manual

Hunter 23566 Manual

Hunter 23566 manual content summary:

  • Hunter 23566 | Owner's Manual - Page 1
    Installation Manual Manual de Instalación Manual de Instalação 44270 07/29/2011
  • Hunter 23566 | Owner's Manual - Page 2
    and Preparation...­3 Using This Manual...5 Installation ...7 Operation and Troubleshooting...22 Introducción y preparación...3 Uso de este Manual...5 Instalación...7 Operación y localización de fallas...22 Introdução e Preparação...3 Usando este Manual...5 Instalação...7 Operação e Solução de
  • Hunter 23566 | Owner's Manual - Page 3
    to save your receipt for your records. Model Name Model Number Serial Number Date Purchased Place Purchased Before Installation Before installing your fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in the ceiling. • Drill holes and install wood screws or
  • Hunter 23566 | Owner's Manual - Page 4
    fan support and outlet box meet applicable safety codes for ceiling fans. Checking Your Fan Parts Check your fan parts carefully. Unpack your fan parts as instructed by this manual to avoid damage. Be sure to save this manual ções, todos os ventiladores Hunter utilizam extensões para hastes com
  • Hunter 23566 | Owner's Manual - Page 5
    parts for future use. This manual will help you install, operate, and maintain your new fan. These instructions are designed to make installation and de 3,5 mm o broca para mampostería* *used only for concrete ceilings Llave inglesa o alicates Martillo Cinta métrica Chave de fenda tipo Phillips
  • Hunter 23566 | Owner's Manual - Page 6
    separation gap of at least 3 mm. • Be sure to read this manual carefully before beginning installation and save these instructions for later reference or warranty assistance. • To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these
  • Hunter 23566 | Owner's Manual - Page 7
    2.4 m 2.1 m Portugês Español English Standard Mounting is the most common way to mount a ceiling fan. Standard mounting is recommended for ceilings 2,4 m or higher. El Montaje Estándar es la forma más común de montar un ventilador de techo. Se recomienda el montaje estándar para techos de 2,4 m o
  • Hunter 23566 | Owner's Manual - Page 8
    1-4 before proceeding to step 9. If you have a non-concrete ceiling, follow steps 5-8 before proceeding to step 9. For a concrete ceiling: Identify the supply mains in the ceiling and drill two holes using the ceiling plate [a] as a guide for measurement and accuracy. Si tiene un techo de concreto
  • Hunter 23566 | Owner's Manual - Page 9
    ñol English Drive the M5 x 30 mm expansion anchors [a] into the holes until the ends are flush with the ceiling. Thread the supply mains [a] through the center hole of the ceiling plate [b]. Pase los anclajes de expansión M5 x 30 mm [a] por los agujeros hasta que los extremos estén a nivel con
  • Hunter 23566 | Owner's Manual - Page 10
    screws [c] into the anchors [b] until the isolators [d] are tight against the ceiling. Proceed to step 9. For non-concrete ceilings: Drill two pilot holes into the wood support structure using the ceiling plate [a] as a guide for measurement and accuracy. Alinee dos ranuras ovaladas opuestas en la
  • Hunter 23566 | Owner's Manual - Page 11
    ês Español English Place a flat washer [a] on both of the wood screws [b]. Thread the supply mains [a] through the center hole of the ceiling plate [b]. Coloque una arandela plana [a] en ambos tornillos para madera [b]. Pase los alambres de la alimentación de la red [a] a través del agujero
  • Hunter 23566 | Owner's Manual - Page 12
    align two opposing oval slots with the pilot holes [b]. Insert and tighten the two wood screws [c] with washers [d] to secure the ceiling plate [a] to the ceiling. Pull the wires [a] through one side of the pin [b] in the pipe assembly [c]. Eleve la placa de techo [a] y alinee dos ranuras ovaladas
  • Hunter 23566 | Owner's Manual - Page 13
    [a] 1140 1151 [a] Portugês Español English Screw the pipe assembly [a] into the adapter until tight. Securely tighten the pipe setscrew [a]. Entornille el conjunto del tubo [a] en la adaptador hasta que esté apretado. Apriete el tornillo de ajuste del tubo [a]. Atarraxe a unidade da haste [a]
  • Hunter 23566 | Owner's Manual - Page 14
    of fire, electrical shock, or motor damage, do not lift or carry the fan by the lead wires. To prevent damage to the wires on the bottom of the fan assembly, do not sit fan on hard surface. Use foam inside box as support. The pipe adapter has a special coating on the threads. Do not remove
  • Hunter 23566 | Owner's Manual - Page 15
    , before wiring the fan, disconnect power by turning off the circuit breakers to both the outlet box and its associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. All wiring must
  • Hunter 23566 | Owner's Manual - Page 16
    /yellow ground wire from the ceiling to the green/yellow ground wire from the ceiling plate and the green/ yellow ground wire from the fan •The white wire from the ceiling to the white wire from the fan •The black wire from the ceiling to the black and the black/white wire from the fan Cableado para
  • Hunter 23566 | Owner's Manual - Page 17
    to the green/yellow ground wire from the ceiling plate and the green/ yellow ground wire from the fan •The white wire from the ceiling to the white wire from the fan •_The black wire from the ceiling to the black wire from the fan •_The black/white wire from the fan to the wire for the wall switch
  • Hunter 23566 | Owner's Manual - Page 18
    17 [a] 18 [b] English Español Portugês Partially install two canopy screws (about 2 full turns) in the hanger bracket. Raise the canopy over the hanger bracket. Align partially installed screws [a] with key slots in canopy [b]. Twist canopy counterclockwise to secure. Install third canopy screw
  • Hunter 23566 | Owner's Manual - Page 19
    ball so the tab [a] in the canopy is secure in the hanger ball groove [b]. Note: Your fan may have multiple tabs and grooves that must be aligned. If your fan includes grommets [a], place them in the fan blade holes by hand. ADVERTENCIA: Si no completa los pasos siguientes podría causar la caída
  • Hunter 23566 | Owner's Manual - Page 20
    screws [c]. Repeat for all blades. Securely tighten all screws. Loosely insert blade mounting screws [a] through the blade iron [b] into the fan until all fan blades are spaced and attached. Securely tighten all screws. Fije el aspa del ventilador [a] al soporte del aspa [b] usando tres tornillos
  • Hunter 23566 | Owner's Manual - Page 21
    Portugês Español English [a] 23 The fan comes with a light fixture gasket [a]. To use a light fixture on the fan, remove the bottom cover and install the gasket [a] between the light fixture and the fan. El ventilador viene con una empaquetadura para artefacto de iluminación [a]. Para utilizar un
  • Hunter 23566 | Owner's Manual - Page 22
    English Operating Your Hunter Fan • Turn on the electrical power to the fan. • The fan pull chain controls power to the fan. The chain has four settings in sequence: High, Medium, Low, and Off. • Pull the chain slowly to adjust the setting. Ceiling fans work in two directions: downdraft (
  • Hunter 23566 | Owner's Manual - Page 23
    a furniture polish cloth. Occasionally, a light coat of furniture polish may be applied for added protection and beauty. Painted and high-gloss blades may be cleaned in the same manner as the fan finish. If you need parts or service assistance contact your Hunter Fan retailer or visit out website at
  • Hunter 23566 | Owner's Manual - Page 24
    all screws. Problem: Excessive wobbling. Solution: • Use balancing kit included with fan. • Tighten all screws. • Turn power off, support fan very carefully and check that the ball is properly seated. If you have tried these troubleshooting solutions and still have trouble, visit our website
  • Hunter 23566 | Owner's Manual - Page 25
    44270 07/29/2011
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

Installation Manual
Manual de Instalación
Manual de Instalação
44270
07/29/2011