Hunter 23957 Owner's Manual
Hunter 23957 Manual
 |
View all Hunter 23957 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 23957 manual content summary:
- Hunter 23957 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type T Models Owner's Guide and Installation Manual English Español Form# 42696-01 20091104 ©2009 Hunter Fan Co. - Hunter 23957 | Owner's Manual - Page 2
and Cleaning Your Ceiling Fan 13 9 • Troubleshooting 14 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating - Hunter 23957 | Owner's Manual - Page 3
is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • e outlet box - Hunter 23957 | Owner's Manual - Page 4
box align with the joist or support brace. 4-3. Drill pilot holes no service panel. 5-2. read the fan supply line through the outlet box so that the fan supply line extends at least 6" beyond the box. 5-3. Attach the fan fan site. For instructions to install your ceiling fan, go to your fan manual - Hunter 23957 | Owner's Manual - Page 5
a wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase - Hunter 23957 | Owner's Manual - Page 6
or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 1-866-268-1936). Preparing the Fan Site Before you begin installing the fan, follow all the instructions in "Preparing the Fan Site." Proper ceiling fan location and attachment to the - Hunter 23957 | Owner's Manual - Page 7
, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should Plate 3" Wood Screw Steps 2-3 - 2-6 7 42696-01 • 11/04/09 • Hunter Fan Company - Hunter 23957 | Owner's Manual - Page 8
in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angled mounting: 3-2. Insert the downrod through the canopy and canopy trim ring. Feed the wires from the fan through the downrod Low Profile Screw Low Profile Washer 8 42696-01 • 11/04/09 • Hunter Fan Company - Hunter 23957 | Owner's Manual - Page 9
to the green ground wire (grounding) from the ceiling plate and the green ground wire from the fan or the green ground wire present on the low profile washer. 4-4. Connect the white wire (grounded) box. 9 42696-01 • 11/04/09 • Hunter Fan Company Wire Connector Dual Switch Wiring Single Switch Wiring - Hunter 23957 | Owner's Manual - Page 10
in the canopy is secure in the hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the Step 5-3 Canopy Canopy Trim Ring Canopy Screw 10 42696-01 • 11/04/09 • Hunter Fan Company - Hunter 23957 | Owner's Manual - Page 11
Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both - Hunter 23957 | Owner's Manual - Page 12
housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws. Note: You can customize your Hunter fan with a number of accessory light kits. Steps 7-1 - 7-4 Housing Assembly Screw Upper Switch Housing Plug Connector Housing Assembly Screw 12 Lower - Hunter 23957 | Owner's Manual - Page 13
use downward air flow pattern In cold weather, use upward air flow pattern To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 13 42696-01 • 11/04/09 • Hunter Fan Company - Hunter 23957 | Owner's Manual - Page 14
screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. If you need parts or service assistance, please call 888‑830‑1326 (In Canada, call 1-866-268-1936) or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
 |
 |
Type T Models
Type T Models
Type T Models
Form# 42696-01
20091104
©2009 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual