Hunter 28670 Owner's Manual
Hunter 28670 Manual
 |
View all Hunter 28670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 28670 manual content summary:
- Hunter 28670 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42433-01 20111119 ©2011 Hunter Fan Co. - Hunter 28670 | Owner's Manual - Page 2
Cleaning Your Ceiling Fan 16 9 • Troubleshooting 17 Cautions and Warnings • READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION. SAVE THESE INSTRUCTIONS. • Use only Hunter replacement parts. • To reduce the risk of personal injury, attach the fan directly to the support structure of - Hunter 28670 | Owner's Manual - Page 3
is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • e outlet box - Hunter 28670 | Owner's Manual - Page 4
any hardware store or electrical supply house. 5-4. Make certain the wiring meets all national and local standards and ANSI/NFPA 70. You have now successfully prepared your ceiling fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing - Hunter 28670 | Owner's Manual - Page 5
this manual include instructions for all three Installer's Choice mounting methods. Considering Optional Accessories Consider using Hunter's the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling - Hunter 28670 | Owner's Manual - Page 6
site) Checking Your Fan Parts Carefully unpack your fan to avoid damage to the fan parts. Refer to the included Parts Guide. Check for any shipping damage to the motor or fan blades. If any parts are missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888 - Hunter 28670 | Owner's Manual - Page 7
switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support . Ceiling Plate 3" Wood Screw Steps 2-3 - 2-6 7 42433-01 • 01/19/11 • Hunter Fan Company - Hunter 28670 | Owner's Manual - Page 8
Fan WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angled mounting: 3-2. Insert the downrod through the canopy and canopy trim ring. Feed the wires from the fan 8 42433-01 • 01/19/11 • Hunter Fan Company - Hunter 28670 | Owner's Manual - Page 9
use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. 4-1. Before attempting installation, make . 9 42433-01 • 01/19/11 • Hunter Fan Company Wire Connector Dual Switch Wiring Single Switch Wiring - Hunter 28670 | Owner's Manual - Page 10
in the canopy is secure in the hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the Step 5-3 Canopy Canopy Trim Ring Canopy Screw 10 42433-01 • 01/19/11 • Hunter Fan Company - Hunter 28670 | Owner's Manual - Page 11
the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. If - Hunter 28670 | Owner's Manual - Page 12
Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan fan model. 7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting - Hunter 28670 | Owner's Manual - Page 13
to the light socket(s) may result in fire hazard or improper operation. If lights do not appear to be operating properly, see the troubleshooting section. Lower Switch Housing Plug Connector Steps 7-6 - 7-7 Plug Connector Detail 13 42433-01 • 01/19/11 • Hunter Fan Company Housing Assembly Screw - Hunter 28670 | Owner's Manual - Page 14
) into the sockets. 7-9. Thread the light and fan pull chains through the hole in the center of center of the cover plate. 7-10. Thread the fan pull chain through the grommet hole in the side of extra pull chains (included) to the light and fan pull chains using the breakaway connector. (You can - Hunter 28670 | Owner's Manual - Page 15
Install the switch housing cap and plug button to the lower switch housing. 7-20. Once you have uninstalled the light fixture, continue with step 7‑6. Lower Switch Housing Step 7-16 Male Dummy Terminal Female Dummy Terminal Cap Plug Button Step 7-19 15 42433-01 • 01/19/11 • Hunter Fan Company - Hunter 28670 | Owner's Manual - Page 16
fan off and let it come to a complete any residue, as they will damage the protective stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Dust Armor on the blades. Reversing Switch In cold weather, use upward air flow pattern 16 42433-01 • 01/19/11 • Hunter Fan - Hunter 28670 | Owner's Manual - Page 17
9 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
 |
 |
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42433-01
20111119
©2011 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual