Husqvarna 150BT Owners Manual

Husqvarna 150BT Manual

Husqvarna 150BT manual content summary:

  • Husqvarna 150BT | Owners Manual - Page 1
    of California to cause cancer, birth defects or other reproductive WARNING Before using our products, please read this manual carefully to understand the proper use of your unit. APPLICABLE SERIAL NUMBERS: 80100101 and up Operator's manual 130BT 150BT/BF 170BT/BF 180BT/BF English 115 09 83-95
  • Husqvarna 150BT | Owners Manual - Page 2
    part on you engine (as listed above) is defective, the part will be repaired or replaced by Husqvarna Forest & Garden. OWNER'S WARRANTY RESPONSIBILITIES As the small nonroad engine owner, you are responsible for the performance of the required maintenance listed in your Operator's Manual. Husqvarna
  • Husqvarna 150BT | Owners Manual - Page 3
    16 FUEL 16 HOW TO MIX FUEL 16 FUELING THE UNIT 16 Operation 17 CONTROL ARM [150BF/170BF/180BF 17 STARTING ENGINE 17 ADJUSTING IDLE SPEED 18 STOPPING ENGINE 18 Maintenance 19 AIR CLEANER 19 FUEL FILTER 20 SPARK PLUG 20 MUFFLER 20 SPARK ARRESTER 20 AIR INLET NET 21 IGNITION COIL AIR GAP
  • Husqvarna 150BT | Owners Manual - Page 4
    operator or others. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. The blower operator Keep all parts of your body away from hot surfaces. Always wear protective gloves. Wear study, non-slip boots The blower can forcibly
  • Husqvarna 150BT | Owners Manual - Page 5
    to stop the engine Position: THROTTLE LEVER [130 BT/150 BT/170 BT only] A A B C B C ∗1 : THE ACTUAL MANUFACTURING MONTH WILL BE PRINTED. A : Model B : ENGINE FAMILY C : ENGINE DISPLACEMENT 130BT 7KZXS.0294BK ∗2 29cc 150BT/BF 7KZXS.0505BP ∗2 50cc 170BT/BF
  • Husqvarna 150BT | Owners Manual - Page 6
    Handle fuel with care. It is highly flammable. b) Do not smoke while handing fuel. c ) Do not refuel a hot engine. d) Do not refuel a running engine. e) Avoid spilling fuel or oil. Always wipe unit dry before using. f ) Move at least 10 ft. (3 meters) away from the fueling point before starting the
  • Husqvarna 150BT | Owners Manual - Page 7
    spark plug before performing maintenance or accessing movable parts. [130BT] [150BT/BF] [170BT/BF] [180BT/BF] USING THE PRODUCT WARNING While using the product, if abnormal noise or vibration occurs, stop the engine immediately and contact the nearest Husqvarna servicing
  • Husqvarna 150BT | Owners Manual - Page 8
    around the fuel line, the muffler, and the ignition wiring. 4. All engine service except for those described in this manual should be performed by competent service personnel. Improper service to the blower fan and muffler could cause a hazardous failure. 5. When replacing the any other part or any
  • Husqvarna 150BT | Owners Manual - Page 9
    17 19 5 16 22 1. Frame 2. Harness 3. Spark Plug Cap 4. Throttle Lever 5. Guard Net 6. Choke Lever 7. Air Cleaner 8. Volute Case, Cover 9. "CAUTION" Label 10. Elbow 11. Fuel Tank 12. Recoil Starter 13. Stop Switch with Throttle Position Setting 14. Engine Cover 15. Handle Bar (Option) 16. Fan 17
  • Husqvarna 150BT | Owners Manual - Page 10
    20 1. Frame 2. Harness 3. Spark Plug Cap 4. Throttle Lever 5. Net 6. Choke Lever 7. Air Cleaner 8. Volute Case, Cover 9. "CAUTION" Label 10. Elbow 11. Fuel Tank 12. Recoil Starter 13. Stop Switch with Throttle Position Setting 14. Engine Cover 15. Handle Bar (Option) (150BT only) 16. Fan 17. Shock
  • Husqvarna 150BT | Owners Manual - Page 11
    2. Harness 3. Spark Plug Cap 4. Throttle Lever 5. Stop Switch (behind) 6. Net 7. Choke Lever 8. Air Cleaner 9. Volute Case, Cover 10. "CAUTION" Label 11. Elbow 12. Fuel Tank 13. Recoil Starter 14. Stop Switch with Throttle Position Setting 15. Engine Cover 16. Handle Bar (Option) (170 BT only) 17
  • Husqvarna 150BT | Owners Manual - Page 12
    2. Harness 3. Spark Plug Cap 4. Throttle Lever 5. Stop Switch (behind) 6. Net 7. Choke Lever 8. Air Cleaner 9. Volute Case, Cover 10. "CAUTION" Label 11. Elbow 12. Fuel Tank 13. Recoil Starter 14. Stop Switch with Throttle Position Setting 15. Engine Cover 16. Handle Bar (Option) (180 BT only) 17
  • Husqvarna 150BT | Owners Manual - Page 13
    fresh flow filter system Carburetor (Diaphragm) valve type Rotary Ignition System CDI Digital Ignition Spark Plug NGK CMR7H Muffler Spark arrester equipped Idle speed rpm 3000 2200 2000 Operating Engine Speed rpm 3000 to 6700 2200 to 6100 2000 to 6900 2000 to 6700 Fuel Consumption
  • Husqvarna 150BT | Owners Manual - Page 14
    A light lubricant may be used to ease assembly of flexible hose to blower elbow. „ THROTTLE LEVER [130BT/150BT/170BT/180BT] 1. Set up the throttle the power cable to the hose. (1) Clamp „ RIGHT HANDLE [150BF/170BF/180BF] • Insert the handle holder to the swivel and tighten the screw on the holder
  • Husqvarna 150BT | Owners Manual - Page 15
    A light lubricant may be used to ease assembly of blower tube. NOTE If longer tube is required, the second straight pipe can be connected with the first one. F8 If higher air speed is required, the round blow pipe can be replaced
  • Husqvarna 150BT | Owners Manual - Page 16
    disruption of engine lubrication. 3. OIL FOR 4-CYCLE ENGINE USE - It can cause spark plug fouling, exhaust port blocking, or piston ring sticking. 4. Mixed fuels which have been left unused for a period of one month or more may clog the carburetor and result in the engine failing to operate properly
  • Husqvarna 150BT | Owners Manual - Page 17
    order. (1)First position (2)Second position „ STARTING ENGINE IMPORTANT • Avoid operating the blower with the flexible tube and swivel joint disconnected. That will reduce the cooling air and the engine could be damaged by overheating. 1. Push the primer bulb until fuel flows out in the clear tube
  • Husqvarna 150BT | Owners Manual - Page 18
    pushed the plug won't give off sparks until the engine stops. (3)Idling (5)Stop Switch NOTE If the engine does not stop when setting the ignition switch to the stop position, close the choke lever and stop the engine. In this case, please repair the machine at your nearest servicing dealer. (1)Choke
  • Husqvarna 150BT | Owners Manual - Page 19
    any service to the blower. Contact with rotating blower fan or hot muffler may result in a personal injury. „ AIR CLEANER • Check the air cleaner before use. A clogged air filter may increase fuel consumption while cutting down the engine power. • Never operate the blower without an air filter or
  • Husqvarna 150BT | Owners Manual - Page 20
    spark gap should be adjusted to .025 in (0.6 to 0.7mm). • Plug manufacturers recommend replacing the plug twice a year to avoid unexpected plug failure in a job. REPLACEMENT PLUG IS A NGK CMR7H. F33 IMPORTANT • Note that using any spark plugs other than those designated may result in the engine
  • Husqvarna 150BT | Owners Manual - Page 21
    personal injury. Storage BEFORE STORING THE BLOWER: 1. Drain the fuel tank and push the primer bulb until it becomes empty of fuel. 2. Remove the spark plug and drop a spoonful of 2-cycle oil into the cylider. Crank the engine several time and install the spark plug. 3. Store unit in a dry, cool
  • Husqvarna 150BT | Owners Manual - Page 22
    22
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

WARNING
The engine exhaust from this product contains
chemicals known to the State of California to cause
cancer, birth defects or other reproductive
WARNING
Before using our products, please read this manual
carefully to understand the proper use of your unit.
APPLICABLE SERIAL NUMBERS: 80100101 and up
Operator’s manual
130BT
150BT/BF
170BT/BF
180BT/BF
English
115 09 83-95