Husqvarna 327RJx Owners Manual
Husqvarna 327RJx Manual
 |
View all Husqvarna 327RJx manuals
Add to My Manuals
Save this manual to your list of manuals |
Husqvarna 327RJx manual content summary:
- Husqvarna 327RJx | Owners Manual - Page 1
Operator's manual 327RJX-series Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English - Husqvarna 327RJx | Owners Manual - Page 2
! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator's manual. Please read the operator's manual carefully and make - Husqvarna 327RJx | Owners Manual - Page 3
Fitting other guards and cutting attachments ....... 13 FUEL HANDLING Fuel 16 WORKING TECHNIQUES General working instructions 18 MAINTENANCE Carburetor 21 Muf read the operator's manual carefully. Maintenance, replacement or replacement parts. WARNING! A clearing saw, brushcutter ! or trimmer can - Husqvarna 327RJx | Owners Manual - Page 4
, service, maintenance etc) the life span and the second-hand value of the machine can be extended. If you ever lend or sell this machine, make sure that the borrower or buyer gets the operator′s manual, so they will also know how to properly maintain and use it. Thank you for using a Husqvarna - Husqvarna 327RJx | Owners Manual - Page 5
is what on the grass trimmer? 1 Trimmer head 2 Grease filler cap, bevel gear 3 Bevel gear 4 Cutting attachment guard 5 Shaft 6 Loop handle Support flange 19 Drive disc 20 Socket spanner 21 Operator's manual 22 Allen key 23 Locking pin 24 Support cup 25 Blade 26 Transport guard 27 J-handle 28 Support - Husqvarna 327RJx | Owners Manual - Page 6
service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions clearing saw, brushcutter or trimmer can be vicinity of the machine. As the cutting attachments. machine is equipped with a spring- - Husqvarna 327RJx | Owners Manual - Page 7
machine fails any of these checks contact your service agent to get it repaired. Throttle lockout instructions under the heading Start. Start the machine and apply full throttle. Release the throttle and check that the cutting attachment stops and remains at a standstill. If the cutting attachment - Husqvarna 327RJx | Owners Manual - Page 8
switch Use the stop switch to switch off the engine. Use of incorrectly wound cord or an incorrect cutting attachment increases the level of vibration. See instructions under the heading Cutting equipment. The machine′s vibration damping system reduces the transfer of vibration between the engine - Husqvarna 327RJx | Owners Manual - Page 9
near combustible material! Locking nut A locking nut is used to secure some types of cutting attachment. For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine. Never use a machine that has a faulty muffler. Regularly check that the muf - Husqvarna 327RJx | Owners Manual - Page 10
blades and grass cutters are intended for cutting coarse grass. A trimmer head is intended for trimming grass. Sharpening grass cutters and grass blades • See the cutting attachment packaging for correct sharpening instructions. Sharpen blades and cutters using a single-cut flat file. • Sharpen - Husqvarna 327RJx | Owners Manual - Page 11
a particular engine size. This is especially important when a fully automatic trimmer head is used. Only use the recommended cutting attachment. See the chapter on Technical data. • Smaller machines generally require small trimmer heads and vice versa. This is because when clearing using a cord - Husqvarna 327RJx | Owners Manual - Page 12
drive disc/ support flange engages correctly in the centre hole of the cutting attachment. If the cutting attachment is fitted incorrectly • Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob. WARNING! Never use a cutting ! attachment without an approved guard - Husqvarna 327RJx | Owners Manual - Page 13
in the hole to lock the shaft. • Place the blade (D), support cup (E) and support flange (F) on the output shaft. • Fit the nut (G). The instructions in the reverse order. Fitting other guards and cutting attachments • Fit the correct trimmer guard (A) for use with the trimmer head. Hook the trimmer - Husqvarna 327RJx | Owners Manual - Page 14
, change your clothes. Wash any part of your body that has come service is carried out before long-term storage. • The transport guard must always be fitted to the cutting attachment for four-stroke engines. • Mixing ratio 1:50 (2%) with HUSQVARNA two-stroke oil. Gasoline, litre 5 10 15 20 US gallon - Husqvarna 327RJx | Owners Manual - Page 15
. Always move the machine away from the refuelling area before starting. • Clean the area around the fuel cap. Contamination in the tank can cause operating problems. • Ensure that the fuel is well mixed by shaking the container before filling the tank. English - 15 - Husqvarna 327RJx | Owners Manual - Page 16
Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if machine on a flat surface. Ensure the cutting attachment cannot come into contact with any object. Make trimmer head and trimmer guard are not damaged or cracked. Replace the - Husqvarna 327RJx | Owners Manual - Page 17
with the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately. Hold the body of the machine on assembling, checking and/or performing maintenance. CAUTION! Do not put any part of your body in marked area. Contact can result in burns to - Husqvarna 327RJx | Owners Manual - Page 18
instructions IMPORTANT! This section describes the basic safety precautions for working with brush cutters and trimmers. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service wrapped around the cutting attachment. 3 Do not - Husqvarna 327RJx | Owners Manual - Page 19
between the guard and cutting attachment. Always stop the engine material being cut. • Let the support cup rest lightly against the ground. the blade by following these instructions: 1Always work at full throttle removes all unwanted vegetation. Keep the trimmer head just above the ground and - Husqvarna 327RJx | Owners Manual - Page 20
to constantly come into contact with the ground during normal cutting. Constant contact of this type can cause damage and wear to the trimmer head. Sweeping • The fan effect of the rotating cord can be used for quick and easy clearing up. Hold the cord parallel to and above - Husqvarna 327RJx | Owners Manual - Page 21
MAINTENANCE Carburetor Your Husqvarna product has been designed and manufactured to section. WARNING! If the idle speed cannot be ! adjusted so that the cutting attachment stops, contact your dealer/service workshop. Do not use the machine until it has been correctly adjusted or repaired. - Husqvarna 327RJx | Owners Manual - Page 22
mixture (too much or incorrect type of oil). • A dirty air filter. These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties. If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark - Husqvarna 327RJx | Owners Manual - Page 23
soaked in oil. See instructions under the heading Oiling the cylinder. Air filter Always use HUSQVARNA filter oil, art. no problems • Loss of engine power • Unnecessary wear to engine parts grease. Use HUSQVARNA special grease. The HUSQVARNA replacement parts. Use of other brands of replacement parts - Husqvarna 327RJx | Owners Manual - Page 24
are described in the Maintenance section. The user must only carry out the maintenance and service work described in this manual. More extensive work must be carried out by an authorized service workshop. Maintenance Daily maintenance Clean the outside of the machine. X Make sure the throttle - Husqvarna 327RJx | Owners Manual - Page 25
Technical data 327RJx Motor Cylinder US pint/litre 1,06/0,5 Weight Weight without fuel, cutting attachment and guard, Lbs/kg 10,8/4,9 Sound levels (see note 1) to EN ISO 11806 and ISO 22868, dB(A): Equipped with trimmer head (original) 96 Equipped with grass blade (original) 95 - Husqvarna 327RJx | Owners Manual - Page 26
Approved accessories Arbor shaft thread M10 Plastic blades Grass blade/grass cutter Trimmer head TECHNICAL DATA Type Cutting attachment guard, Art. no. Tricut Ø 300 mm (Separate blades have part number 531 01 77-15) Grass 255-4 1" (Ø 255 4-teeth) Grass 255-8 1" (Ø 250 8-teeth) T25 (Ø 2.0 - 2.7 - Husqvarna 327RJx | Owners Manual - Page 27
off-road engine or a part has failed due to abuse, neglect, or improper maintenance or unapproved modifications. • You are responsible for presenting your small off-road engine to a Husqvarna Forest & Garden distribution center or service center as soon as the problem exists. The warranty repairs - Husqvarna 327RJx | Owners Manual - Page 28
husqvarna.com. WHERE TO GET WARRANTY SERVICE Warranty services or repairs are provided through all Husqvarna Forest & Garden authorized servicing dealers. MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS Any replacement part maintenance, as defined in the operator's manual. 28 - English - Husqvarna 327RJx | Owners Manual - Page 29
- Husqvarna 327RJx | Owners Manual - Page 30
2,4-2,7 mm .095-.106" S35 1 4 2 5 3 8,5 m 28' 10 cm 4" 4,2 m 14' 6 7 8 "Clic" 10 11 15 cm 6" - Husqvarna 327RJx | Owners Manual - Page 31
S35 1 3 2 2,4-2,7 mm .095-.106" 4,25 m 14' 4 4,25 m 14' 5 15 cm 6" A B 15 cm 6" - Husqvarna 327RJx | Owners Manual - Page 32
2,4-2,7 mm .095-.106" T35, T35x 1 2 4 5 3 8,5 m 28' 10 cm 4" 4,3 m 14' 6 7 15 cm 6" 9 8 "Clic" - Husqvarna 327RJx | Owners Manual - Page 33
2,0-2,4 mm .079-.095" T25 1 4 2 5 3 6,0 m 18' 10 cm 4" 3,05 m 9' 6 7 15 cm 6" 9 8 "Clic" - Husqvarna 327RJx | Owners Manual - Page 34
- Husqvarna 327RJx | Owners Manual - Page 35
- Husqvarna 327RJx | Owners Manual - Page 36
Original instructions 1153288-95 ´´®®zz++UU
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
English
327RJ
X-series
Oper
ator’s manual
Please r
ead the operator’s manual carefully and make sure you understand the instructions before using the machine.