Husqvarna P-ZT 60 Owners Manual

Husqvarna P-ZT 60 Manual

Get Husqvarna P-ZT 60 PDF manuals and user guides View all Husqvarna P-ZT 60 manuals
Add to My Manuals
Save this manual to your list of manuals

Husqvarna P-ZT 60 manual content summary:

  • Husqvarna P-ZT 60 | Owners Manual - Page 1
    P-ZT4822FS / 966613301 P-ZT6126FS / 966613501 P-ZT26FS BF / 966613701 P-ZT5224FS / 966613401 P-ZT6128BS / 966613601 P-ZT4822FS CARB / 966663801 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Form Number 115 392427R1 10/19/10
  • Husqvarna P-ZT 60 | Owners Manual - Page 2
    prior notification. Note that no legal demands can be placed based on the information contained in these instructions. Use only original parts for repairs. The use of other parts voids the warranty. Do not modify or install non-standard equipment to the unit without consent from the manufacturer
  • Husqvarna P-ZT 60 | Owners Manual - Page 3
    21 Blade Switch 34 Manual Transport 35 ZT-3400 Powertrain 45 LUBRICATION 46 Lubrication Schedule 46 Wheel and Deck Zerks 47 Front Wheel Mount 47 Front Wheel Bearings 47 Deck Spindle 47 Transaxle (Transmission) Fluid Change 48 TROUBLESHOOTING GUIDE 49 STORAGE 51 Winter Storage 51 Service
  • Husqvarna P-ZT 60 | Owners Manual - Page 4
    operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must
  • Husqvarna P-ZT 60 | Owners Manual - Page 5
    This manual is a valuable document. Read the contents carefully before using or servicing the machine. The following of instructions (use, service, maintenance who are also knowledgeable about the safety instructions. Use only approved repair parts to maintain this machine. Accident prevention
  • Husqvarna P-ZT 60 | Owners Manual - Page 6
    by your retailer. See the certificate in the Service Journal in this operator's manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: This manual belongs to the machine with the manufacturing number: Manufacturing
  • Husqvarna P-ZT 60 | Owners Manual - Page 7
    this publication to notify the reader of a risk of personal injury or death, particularly if the reader should neglect to follow instructions given in the manual. IMPORTANT INFORMATION Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. Used in this publication to notify the
  • Husqvarna P-ZT 60 | Owners Manual - Page 8
    symbols and decals Read Operator's Manual Shut off engine and remove key before performing any maintenance or repair work watch for other people Careful going forward, watch for other people Moving sharp blades under cover Battery acid is corrosive, explosive and flammable Warning! Rotating
  • Husqvarna P-ZT 60 | Owners Manual - Page 9
    understand, and follow all instructions on the machine and in the manual before starting. • Do not put hands or feet near rotating parts or under the machine. Keep . Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces. • Do not operate machine without
  • Husqvarna P-ZT 60 | Owners Manual - Page 10
    Anyone who operates this machine must first read and understand this Operation Manual. Local laws may regulate the age of the user. • Keep grass, leaves or other debris buildup which can touch the hot exhaust or engine parts and burn. Do not allow the mower deck to plow leaves or other debris,
  • Husqvarna P-ZT 60 | Owners Manual - Page 11
    wear approved protective glasses or a full visor when assembling or driving. • Always wear gloves when handling the blades. • Never wear loose clothing that can get caught in moving parts. • Use ear protectors to avoid damage to hearing. Slope Operation Slopes are a major factor related to loss
  • Husqvarna P-ZT 60 | Owners Manual - Page 12
    turn machine off if a child enters the area. • Before and while backing, look behind and down for small children. • Never carry children, even with the blades shut off. They may fall off and be seriously injured or interfere with safe machine operation. Children who have been given rides in the past
  • Husqvarna P-ZT 60 | Owners Manual - Page 13
    not start the engine near spilled fuel. • Never use gasoline as a cleaning agent. • If leaks arise in fuel system, engine must not be started until problem has been resolved. • Check the fuel level before each use and leave space for the fuel to expand, as the heat from the engine and
  • Husqvarna P-ZT 60 | Owners Manual - Page 14
    parts, when necessary. • Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them. • Check brake operation frequently. Adjust and service as required. • Maintain or replace safety and instruction nuts and bolts, especially those fastening the blade attachments,
  • Husqvarna P-ZT 60 | Owners Manual - Page 15
    . Only use approved repair parts for the machine. • The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them. • Check the parking brake's functionality regularly. Adjust and service as necessary. • The mulch blades should only be used in
  • Husqvarna P-ZT 60 | Owners Manual - Page 16
    SAFETY Transport • The machine is heavy and can cause serious crushing injuries. Be extra cautious when it is loaded on or unloaded from a vehicle or trailer. • Use an approved trailer to transport the machine. Activate the parking brake, turn off the fuel supply, and fasten the machine with
  • Husqvarna P-ZT 60 | Owners Manual - Page 17
    Do not exceed Max GVW: 2822 lbs/1283 kg. • Read machine's operator manual before each use. • Securely fasten the seat belt if the unit has a and use park brake. • If any part of ROPS is damaged, the entire ROPS must be replaced. • Check all bolts including seat belt for correct torque before each
  • Husqvarna P-ZT 60 | Owners Manual - Page 18
    CONTROLS This operator's manual describes the Husqvarna Zero Turn Rider. The rider is fitted with a Briggs & Stratton or Kawasaki 4. Fuel tank - left 5. Hydro releases levers 6. Hour meter 7. Ignition switch 8. Choke control 9. Throttle control 10. Blade switch 11. Deck release 12. Deck lift 18
  • Husqvarna P-ZT 60 | Owners Manual - Page 19
    CONTROLS Motion Control Levers The machine's speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the steering controls are moved
  • Husqvarna P-ZT 60 | Owners Manual - Page 20
    icon will come on and shut off automatically. The hour meter cannot be manually reset. Tracking Knob If the mower is not tracking straight, check the area such as an empty parking lot or open field. 3. Back the tracking bolt out until flush with nut. 4. Loosen tracking knob out until flush with nut.
  • Husqvarna P-ZT 60 | Owners Manual - Page 21
    dismounting. Release the parking brake before moving the mower. Parking brake Blade Switch To engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is pressed down fully. Blade switch Ignition Switch The ignition switch is placed on the control panel
  • Husqvarna P-ZT 60 | Owners Manual - Page 22
    CONTROLS Release the key to the RUN position when the engine has started. For using "accessory", turn the key clockwise. Ignition switch - RUN position 8050-781 Ignition switch - accessory 8050-848 22
  • Husqvarna P-ZT 60 | Owners Manual - Page 23
    CONTROLS Fuses Fuses are located on the right hand side of the machine. They are accessed by tilting the seat forward. Fuses are flat pin fuses type as used in automobiles. There are three fuses with ratings and functions: 1. 20 A, Primary fuse. 2. 7.5 A, Mower deck coupling. 3. 10 A, Accessories
  • Husqvarna P-ZT 60 | Owners Manual - Page 24
    Levers The levers are located on each side of the rear of the unit below the rear engine plate. The bypass linkage is used when manual pushing or pulling the unit. See Manual Transport in the Operation section. 8065-010 Gas model fuel shut off valve in the CLOSED position. Right side
  • Husqvarna P-ZT 60 | Owners Manual - Page 25
    the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or carburetor are empty. Use fresh fuel the next season. See Storage Instructions for additional information. Never use engine or carburetor cleaners in the fuel
  • Husqvarna P-ZT 60 | Owners Manual - Page 26
    Instructions section and the following pages if you are unfamiliar with the machine. Training Due to unique steering capabilities, zero turn mowers are far more maneuverable than typical riding mowers. This section should be reviewed mower (see Manual Transport in the not engage the blades at this
  • Husqvarna P-ZT 60 | Owners Manual - Page 27
    is in upright position. Before Starting 1. Read the sections Safety Instructions and Controls before starting the machine. 2. Perform the daily maintenance fulfilled before the engine can be started: 1. The blade switch for engaging the mower blades must be depressed. 2. The parking brake must be
  • Husqvarna P-ZT 60 | Owners Manual - Page 28
    setting the lift pedal fully forward. 3. Activate the parking brake. Set mower deck to the transport position 4. Disengage the mower blades by depressing the blade switch. 8065-087 5. Move the steering controls outward to the locked (outer) neutral position. Press the control for disengaging the
  • Husqvarna P-ZT 60 | Owners Manual - Page 29
    OPERATION 6. Move the throttle to the middle position. 7. If the engine is cold, the choke control should be pulled fully up. WARNING! Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects or other reproductive system damage. The engine
  • Husqvarna P-ZT 60 | Owners Manual - Page 30
    OPERATION Weak Battery WARNING! Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries. IMPORTANT INFORMATION The mower is equipped with a 12-volt negative grounded system. The other vehicle must
  • Husqvarna P-ZT 60 | Owners Manual - Page 31
    OPERATION Running 1. Release the parking brake by moving the lever downward. NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine. 2. Move the steering
  • Husqvarna P-ZT 60 | Owners Manual - Page 32
    the rotating blades. WARNING! Ensure that no one is near mower when engaging blade switch. 6. Engage the mower deck by pulling out the blade switch. full. 8065-084 Operating on Hills Read the Safety Instructions Driving on Slopes in the Safety Instructions. WARNING! Do not drive up or down hills
  • Husqvarna P-ZT 60 | Owners Manual - Page 33
    temperature before stopping. To prevent fouling the spark plugs, avoid idling the engine for longer periods. • Disengage the mower deck by depressing the blade switch. 8065-085 Disengage the mower deck and move throttle to minimum • Raise the mower deck by pressing the foot pedal forward to the
  • Husqvarna P-ZT 60 | Owners Manual - Page 34
    height. • The mowing result will be best with a high engine speed (the blades rotate rapidly) and low speed (the rider moves slowly). If the grass is not lawn of stones and other objects that can be thrown out by the blades. Mowing pattern 8011-603b WARNING! Never drive the rider on terrain that
  • Husqvarna P-ZT 60 | Owners Manual - Page 35
    OPERATION Manual Transport WARNING! No adjustments or maintenance should be carried out unless: • the engine stopped • the ignition key removed • drive, reverse the above procedure. 1. Release lever locked into the bypass position 2. Release lever, engaged Right side, ZT-3400 linkage 8058-091 35
  • Husqvarna P-ZT 60 | Owners Manual - Page 36
    (screws, nuts) Clean under the mower deck Start the engine and blades, listen for unusual sounds Check for damage Thoroughly clean around the engine more often. 3) Performed by authorized service workshop. ● = Described in this manual ♦ = Not described in this manual ■ = Refer to the engine
  • Husqvarna P-ZT 60 | Owners Manual - Page 37
    engine manufacturer's manual WARNING! Before performing any service or adjustment checklist: • Engage the parking brake. • Place the Blade-switch in the disengaged position. • Turn the ignition switch to "OFF" position and remove the key. • Make sure the blades and all moving parts have completely
  • Husqvarna P-ZT 60 | Owners Manual - Page 38
    servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life. • Keep battery and terminals clean. • Keep battery bolts supported by the seat rod. 2. Loosen the two wingnuts attached to the side "J" bolts - 20 min. 35 min. 48 min. 90 min. 45 min.
  • Husqvarna P-ZT 60 | Owners Manual - Page 39
    the engine stops when the park brake is not engaged and the operator leaves the seated position. Check that the engine stops if the mower blades are engaged and the driver temporarily moves off the driver's seat. Conditions for starting 8065-021 IMPORTANT INFORMATION To be able to drive, the
  • Husqvarna P-ZT 60 | Owners Manual - Page 40
    relieve the tension on the belt. 4. Carefully roll the belt over the top of the cutter housing pulleys. 5. Remove the belt guide hardware with a ½" wrench and set belt guide aside. 6. Remove the belt from around the electric clutch on the engine shaft. Release the belt tension 8065-040 Deck Belt
  • Husqvarna P-ZT 60 | Owners Manual - Page 41
    the mower on a level surface. Engage the parking brake. Belt Removal 1. Remove the deck belt (see Deck Belt Removal in this section of the manual). 2. Remove clutch stop to access the belt. 3. Disconnect clutch wire. 4. With a ½" breaker bar and using the square opening in the idler arm, shift the
  • Husqvarna P-ZT 60 | Owners Manual - Page 42
    Spindle housing Blade attachment 1 8058-013 IMPORTANT INFORMATION Special blade bolt is heat treated. Replace with a Husqvarna bolt if required. Do not use lower grade hardware than specified. IMPORTANT INFORMATION The sharpening of blades should be carried out by an authorized service workshop
  • Husqvarna P-ZT 60 | Owners Manual - Page 43
    properly adjusted. Faulty mower deck adjustments will cause an uneven mowing result. Four bolts control the height and pitch of the mower deck. The deck should be to leveling the deck. 1. Wear heavy gloves. Turn each outer blade tip to align the deck in a side-to-side manner. 2. Measure from the
  • Husqvarna P-ZT 60 | Owners Manual - Page 44
    To avoid deck damage, the anti-scalp rollers must not be adjusted to support the deck. 8065-094 Caster Wheels Check every 200 hours. Check that wheels rotate freely. Removal and Installation Remove nut and caster bolt. Pull the wheel out of the fork. Install in reverse order. Tighten caster
  • Husqvarna P-ZT 60 | Owners Manual - Page 45
    when cleaning and washing. ZT-3400 Powertrain IMPORTANT INFORMATION Any servicing dealer attempting a warranty repair must have prior approval the transmission. 3. Inspect the transmission cooling fan for broken or bent blades. Remove any obstructions such as grass clippings, leaves or dirt. 4.
  • Husqvarna P-ZT 60 | Owners Manual - Page 46
    Lubrication Schedule LUBRICATION 8065-095 12/12 Every year 1/52 Every Week 1/365 Every day Lubricate with grease gun Oil change Filter change Level check * Change hydraulic drive filters. p Change engine oil every 50 hours. General Remove the ignition key to prevent unintentional movements
  • Husqvarna P-ZT 60 | Owners Manual - Page 47
    LUBRICATION Wheel and Deck Zerks Use only good quality bearing grease. Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality. Front Wheel Mount Remove dust cap to expose zerk. Lubricate with a grease gun until the grease is forced out around the top
  • Husqvarna P-ZT 60 | Owners Manual - Page 48
    to vent during oil fill. 9. Remove the cap from the transaxles' expansion tank located on the vehicle frame. 3 1. Filter guard 2. Transaxle filter 3. Top port plug ZT-3400 filter change 2 1 8019-010
  • Husqvarna P-ZT 60 | Owners Manual - Page 49
    troubleshooting guide Problem Engine will not start. Cause • Blade switch is engaged. • Steering controls are not locked in the neutral position. • Parking brake is not activated. • Battery is dead. • Contamination in the carburetor or
  • Husqvarna P-ZT 60 | Owners Manual - Page 50
    Problem Machine vibrates. Engine overheats. troubleshooting guide Cause • Blades are loose. • Blades are incorrectly balanced. • Engine mower deck has come loose. • Contact for the electromagnetic coupling has loosened. • Blade switch is faulty or has come loose, from the cable contact. • Fuse has
  • Husqvarna P-ZT 60 | Owners Manual - Page 51
    a clean, dry place and cover it for extra protection. Service When ordering spare parts, please specify the purchase year, model, type, and serial number. Always use genuine Husqvarna spare parts. An annual check-up at an authorized service workshop is a good way to ensure that the machine performs
  • Husqvarna P-ZT 60 | Owners Manual - Page 52
    WIRING DIAGRAM TIMER SCHEMATIC 52
  • Husqvarna P-ZT 60 | Owners Manual - Page 53
    TECHNICAL DATA Torque Specifications Hex Head Cap Screws The torque values shown should be used as a general guideline when specific torque values are not given. U.S. Standard Hardware Grade SAE Grade 5 SAE Grade 8 Flangelock Screw w/Flangelock Nut Shank Size (Diameter in inches, fine or
  • Husqvarna P-ZT 60 | Owners Manual - Page 54
    Internal Cog 13 x 6.5 4 ply 23 x 8.5 4 ply 15 PSI / 103 kPa / 1 bar ZT-3400 Dual levers, foam gripped 0-11 mph - 0-17.7 Km/h 0-6 mph - 0-9.7 Km/h Internal Cog PSI / 103 kPa / 1 bar 1) See the Engine Manufacturer's manual for engine specifications. 2) The power rating of the engines indicated is
  • Husqvarna P-ZT 60 | Owners Manual - Page 55
    Arm Rests Hour Meter Blade Engagement Deck Construction Productivity Dimension Weight Base Machine Length Base Machine Height Base Machine Width Overall Width, Chute Up Overall Width, Chute Down Overall Height, ROPS Up TECHNICAL DATA P-ZT4822FS / 966613301 P-ZT4822FS CARB / 966663801 48" (122 cm
  • Husqvarna P-ZT 60 | Owners Manual - Page 56
    duty canister 12v 15 amp @ 3600 rpm 12v 15 amp @ 3600 rpm Electric Electric ZT-3400 Dual levers, foam gripped 0-10 mph - 0-16.1 Km/h 0-5 mph - 15 PSI / 103 kPa / 1 bar 1) See the Engine Manufacturer's manual for engine specifications. 2) The power rating of the engines indicated is the average
  • Husqvarna P-ZT 60 | Owners Manual - Page 57
    Frame Cutting Width Cutting Height Uncut Circle Number of Blades Blade Length Anti-Scalp Rollers Seat Hinged Arm Rests Hour Meter Blade Engagement Deck Construction Productivity Dimension Weight Base Machine Length Base Machine Height Base Machine Width Overall Width, Chute Up Overall Width, Chute
  • Husqvarna P-ZT 60 | Owners Manual - Page 58
    emission rules etc.). Do not remove any of these labels. Certificates can also be supplied with the machine at delivery or written in the Engine manual. Take care of them as they are valuable documents. 58
  • Husqvarna P-ZT 60 | Owners Manual - Page 59
    forward Driving backward Engaging the blades Check the idle speed Check the service The effects of service and maintaining a service journal on the machine's resale value Application areas for mulching Fill in the sales papers, etc. Date, mtr reading, stamp, sign ¨ ¨ ¨ ¨ Delivery service
  • Husqvarna P-ZT 60 | Owners Manual - Page 60
    SERVICE JOURNAL Action After 10 hours Change the engine oil Change the oil filter Inspect hydraulic hoses Inspect hydraulic belt Inspect hydraulic filter Check neutral position
  • Husqvarna P-ZT 60 | Owners Manual - Page 61
    JOURNAL Action Daily Service Clean debris from mower Check engine oil level Check the tire pressures Check underside of deck Inspect deck pulleys Check/clean the engine's cooling air
  • Husqvarna P-ZT 60 | Owners Manual - Page 62
    JOURNAL Action 50-Hour Service Clean debris from mower Check engine oil level Check the tire pressures Check underside of deck Inspect deck pulleys Check/clean the engine's cooling air
  • Husqvarna P-ZT 60 | Owners Manual - Page 63
    JOURNAL Action 250-Hour Service Grease fittings (caster pivots and caster wheels) Inspect dampers Inspect Check engine RPM Clean underside of deck Check blade pitch Grease blade spindles Inspect spindle bearings Inspect deck belt and blades Inspect idler arm bearings Inspect deck idler pulleys
  • Husqvarna P-ZT 60 | Owners Manual - Page 64
    JOURNAL Action 500-Hour Service Grease fittings (caster pivots and caster wheels) Inspect dampers Inspect Check engine RPM Clean underside of deck Check blade pitch Grease blade spindles Inspect spindle bearings Inspect deck belt and blades Inspect idler arm bearings Inspect deck idler pulleys
  • Husqvarna P-ZT 60 | Owners Manual - Page 65
    SERVICE JOURNAL Action At Least Once Each Year Clean the engine's cooling air intake Replace the air cleaner's pre-filter (foam) Replace the air filter's paper
  • Husqvarna P-ZT 60 | Owners Manual - Page 66
    Action SERVICE JOURNAL Date, mtr reading, stamp, sign 66
  • Husqvarna P-ZT 60 | Owners Manual - Page 67
  • Husqvarna P-ZT 60 | Owners Manual - Page 68
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
P-ZT4822FS / 966613301
P-ZT5224FS / 966613401
P-ZT6126FS / 966613501
P-ZT6128BS / 966613601
P-ZT26FS BF / 966613701
P-ZT4822FS CARB / 966663801
Please read the operator manual carefully and make sure
you understand the instructions before using the machine.
Operator Manual
Form Number 115 392427R1
10/19/10