IBM 7870G2U User Guide

IBM 7870G2U Manual

Get IBM 7870G2U PDF manuals and user guides View all IBM 7870G2U manuals
Add to My Manuals
Save this manual to your list of manuals

IBM 7870G2U manual content summary:

  • IBM 7870G2U | User Guide - Page 1
    BladeCenter HS22 Type 7870, 1936, and 1911 Installation and User's Guide
  • IBM 7870G2U | User Guide - Page 2
  • IBM 7870G2U | User Guide - Page 3
    BladeCenter HS22 Type 7870, 1936, and 1911 Installation and User's Guide
  • IBM 7870G2U | User Guide - Page 4
    Note: Before using this information and the product it supports, read the general information in "Notices" on page 83 and the Safety Information, Environmental Notices and User Guide, Warranty Information documents on the IBM Documentation CD. The most recent version of this document is available at
  • IBM 7870G2U | User Guide - Page 5
    ServerGuide problems 76 Appendix. Getting help and technical assistance 79 Before you call 79 Using the documentation 80 Getting help and information from the World Wide Web 80 How to send DSA data to IBM 80 Creating a personalized support web page . . . . 80 Software service and support 80
  • IBM 7870G2U | User Guide - Page 6
    89 Russia Electromagnetic Interference (EMI) Class A statement 89 People's Republic of China Class A electronic emission statement 89 Taiwan Class A compliance statement . . . . 90 Index 91 iv BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 7
    produit, lisez les consignes de sécurité. Vor der Installation dieses Produkts die Sicherheitshinweise lesen. Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza. © Copyright IBM Corp. 2012 v
  • IBM 7870G2U | User Guide - Page 8
    Safety Information document. For example, if a caution statement is labeled "Statement 1," translations for that caution statement are in the Safety Information document under "Statement 1." vi BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 9
    damage. v Disconnect the attached power cords, telecommunications systems, networks, and modems before you open the device covers, unless instructed otherwise in the installation and configuration procedures. v Connect and disconnect cables as described in the following table when installing, moving
  • IBM 7870G2U | User Guide - Page 10
    the lithium battery, use only IBM® Part Number 33F8354 or an could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. v Use of controls or adjustments or Laser de Classe 1 Statement 4 viii BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 11
    levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician. Statement 12 CAUTION: The following label indicates a hot surface nearby. Statement 13 Safety
  • IBM 7870G2U | User Guide - Page 12
    have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. x BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 13
    the rack cabinet. v Always install the heaviest devices in the bottom of the rack cabinet. UL regulatory information This device is for use only with supported blade chassis. Safety xi
  • IBM 7870G2U | User Guide - Page 14
    xii BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User's Guide
  • IBM 7870G2U | User Guide - Page 15
    BladeCenter HS22 to display the matrix of downloadable files for the blade server. The blade server comes with a limited warranty. For information about the terms of the warranty and getting service and assistance, see the Warranty and Support Information document for your blade server on the IBM
  • IBM 7870G2U | User Guide - Page 16
    document. 1. Go to http://www.ibm.com/systems/support/. 2. Under Product support, click BladeCenter. 3. Under Popular links, click the blade server that is visible when the blade server is not in the BladeCenter unit. Note: The illustrations in this document might differ slightly from the hardware.
  • IBM 7870G2U | User Guide - Page 17
    general information about the blade server, including how to install supported optional devices and how to configure the blade server. The following documentation also comes with the blade server: v Problem Determination and Service Guide This document is in Portable Document Format (PDF) on the
  • IBM 7870G2U | User Guide - Page 18
    in this document. 1. Go to http://www.ibm.com/systems/support/. 2. Under Product support, click BladeCenter. 3. Under Popular links, click Publications lookup. 4. From the Product family menu, select BladeCenter HS22 . The IBM Documentation CD Use the IBM Documentation CD to access the blade server
  • IBM 7870G2U | User Guide - Page 19
    also in the multilingual Safety Information document, which is on the IBM Documentation CD. Each statement is numbered for reference to the problem situations. v Attention: These notices indicate possible damage to programs, devices, or data. An attention notice is placed just before the instruction
  • IBM 7870G2U | User Guide - Page 20
    potentially lethal or extremely hazardous to you. A danger statement is placed just before the description of a potentially lethal or extremely hazardous procedure step or situation. 6 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 21
    of the blade server. Notes: 1. Power, cooling, removable-media drives, external ports, and advanced system management are provided by the BladeCenter unit. 2. The operating system in the blade server must provide USB support for the blade server to recognize and use USB media drives and devices. The
  • IBM 7870G2U | User Guide - Page 22
    Supports up to two Predictive Failure Analysis (PFA) Drives: Supports kg (10 lb) double-data rate (DDR3) DRAM. Supports 1 GB, 2 GB, 4 GB, 8 GB, and expansion card interface v Local service processor: Integrated Management Module supported) BladeCenter HS22 Type 7870, 1936, and 1911: Installation and
  • IBM 7870G2U | User Guide - Page 23
    Your blade server offers features, such as, the Integrated Management Module, storage disk drive support, IBM® Director, IBM Enterprise X-Architecture®, microprocessor technology, integrated network support, I/O expansion, large system-memory capacity, light path diagnostics, PCI Express, and power
  • IBM 7870G2U | User Guide - Page 24
    of supported DIMMs, see the ServerProven® list at http://www.ibm.com/servers/eserver/serverproven/ compat/us/. v Light path diagnostics Light path diagnostics provides light-emitting diodes (LEDs) to help you diagnose problems. For more information, see the Problem Determination and Service Guide
  • IBM 7870G2U | User Guide - Page 25
    can diagnose and correct problems. Three of the most important features in server design are reliability, availability, and serviceability (RAS). These RAS Extensible Firmware Interface (UEFI) code and diagnostics v Diagnostic support of Ethernet controllers v ECC protection on the L2 cache
  • IBM 7870G2U | User Guide - Page 26
    .com/systems/management/director/resources/. It is updated every 6 to 8 weeks. v Support for IBM and non-IBM servers, desktop computers, workstations, and notebook computers. v Support for systems-management industry standards. v Integration into leading workgroup and enterprise systems-management
  • IBM 7870G2U | User Guide - Page 27
    Major components of the blade server Use this information to locate the major components on the blade server. The major components of the blade server include Field Replaceable Units (FRUs), Customer Replaceable Units (CRUs), and optional devices. The following illustration shows the major
  • IBM 7870G2U | User Guide - Page 28
    14 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User's Guide
  • IBM 7870G2U | User Guide - Page 29
    blade server might not have power permissions assigned to it through the Advanced Management Module, the BladeCenter unit does not have enough power to turn on the blade server, or the service processor (IMM) on the blade server is not communicating with the Advanced Management Module. v Flashing
  • IBM 7870G2U | User Guide - Page 30
    the partition. Use this recessed button only as directed by IBM Support. Note: You can also send an NMI event to the selected blade server remotely using the AMM. For more information, see the BladeCenter Advanced Management Module User's Guide. Keyboard/video/mouse (KVM) select button: Press this
  • IBM 7870G2U | User Guide - Page 31
    seconds). Media-tray select button: Press this button to associate the shared BladeCenter unit media tray (removable-media drives) with the blade server. The LED Note: The operating system in the blade server must provide USB support for the blade server to recognize and use the removable-media
  • IBM 7870G2U | User Guide - Page 32
    the power-control button. While the service processor in the blade server is the management module, the operating system supports the Wake on LAN feature, and IBM BladeCenter Management Module User's Guide or go to http://www-03.ibm.com/systems/management/ for more information. 18 BladeCenter HS22
  • IBM 7870G2U | User Guide - Page 33
    blade server. BladeCenter GPU expansion unit LED The following illustration identifies the fault LED on the front of the BladeCenter GPU expansion (BGE path LEDs in the expansion blade (see the Problem Determination and Service Guide that comes with your server for more information). Chapter 2.
  • IBM 7870G2U | User Guide - Page 34
    20 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User's Guide
  • IBM 7870G2U | User Guide - Page 35
    .ibm.com/systems/support/. 2. Under Product support, click BladeCenter. 3. Under Popular links, click Software and device drivers. 4. Click BladeCenter HS22 can also indicate touch points on hot-swap components.) See the instructions for removing or installing a specific hot-swap component for any
  • IBM 7870G2U | User Guide - Page 36
    battery becomes defective, replace it immediately. For instructions, see the Problem Determination and Service Guide. Handling static-sensitive devices Use this information to indoor humidity and increases static electricity. 22 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 37
    blade server from the BladeCenter unit Use these instructions to remove the blade server from the BladeCenter unit. The following illustration shows how to remove a single-width type of blade server or blade filler from a Type 8677 BladeCenter unit. The appearance of your BladeCenter unit might be
  • IBM 7870G2U | User Guide - Page 38
    minute. Removing the blade server cover Use these instructions to open the blade server cover. The following a BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions). BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 39
    installed on your blade server, see http://www.ibm.com/servers/eserver/ serverproven/compat/us/. 2. If the blade server is installed in a BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions). 3. Remove the cover from the blade server or
  • IBM 7870G2U | User Guide - Page 40
    to remove the optional expansion unit from the blade server. Note: For instruction on removing an expansion unit from the the IBM WebSphere DataPower Integration Blade XI50B Type 4195 appliance, see the Installation and User's Guide that came with the blade appliance. To remove an optional expansion
  • IBM 7870G2U | User Guide - Page 41
    it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions). 3. Carefully lay the blade server on a flat drive, you can install an additional drive in storage bay 1. The blade server supports using RAID 0 or RAID 1 when two storage drives of the same interface type
  • IBM 7870G2U | User Guide - Page 42
    package that contains the hot-swap storage drive to any unpainted metal surface on the BladeCenter unit or any unpainted metal surface on any other grounded rack component; then, remove remove the drive from the storage bay. 28 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 43
    instructions to install memory modules in the blade server. The blade server has a total of twelve direct inline memory module (DIMM) slots. The blade server supports capacities. For a current list of supported DIMMs for the blade server, see http://www.ibm.com/servers/ eserver/serverproven/compat/
  • IBM 7870G2U | User Guide - Page 44
    available (with 16 GB DIMMs) is 64 GB in a single CPU system and 128 GB in a dual CPU system. All three channels must have 30 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 45
    do not have to be identical. The population ordering for spare channel mode is shown in the table below. Note: Spare channel mode is only supported if the blade server has an Intel Xeon 5600 series microprocessor. Use the Setup utility to view the system summary and verify the type of
  • IBM 7870G2U | User Guide - Page 46
    in a BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions). 4. the DIMM to any unpainted metal surface on the BladeCenter unit or any unpainted metal surface on any other BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 47
    you begin, read "Safety" on page v and "Installation guidelines" on page 21. 2. If the blade server is installed in a BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23). 3. Remove the blade server cover (see "Removing the blade server cover" on page 24
  • IBM 7870G2U | User Guide - Page 48
    BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions unit" on page 26 for instructions). 6. If you have not unpainted metal surface of the BladeCenter unit or any unpainted BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 49
    9. Carefully turn over the expansion-unit riser assembly, and use a Phillips screwdriver to install the four non-captive retaining screws, as shown in the following illustration. 10. Turn over the expansion-unit riser assembly and install the riser assembly into the expansion unit system board, as
  • IBM 7870G2U | User Guide - Page 50
    from the BladeCenter GPU BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions BladeCenter GPU expansion blade: a. Disconnect the auxiliary power cable (A) from the GPU adapter, as shown in the following illustration. 36 BladeCenter HS22
  • IBM 7870G2U | User Guide - Page 51
    A B b. Loosen the screws and remove the retention bracket, then disconnect the cable from the expansion-unit system board (B). c. Locate the tray-release button on the bottom of the expansion unit. Tray release button d. Press in and hold the tray-release button; then, pull the expansion-unit
  • IBM 7870G2U | User Guide - Page 52
    connector in the riser assembly and lift it out of the riser assembly. 8. If you are instructed to return the GPU adapter, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you. 38 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 53
    down the operating system, turn off the blade server, and remove the blade server from the BladeCenter unit. See "Removing the blade server from the BladeCenter unit" on page 23 for instructions. 3. Carefully lay the blade server on a flat, static-protective surface. 4. Open the blade server cover
  • IBM 7870G2U | User Guide - Page 54
    static-protective bag that contains the new microprocessor to any unpainted surface on the BladeCenter chassis or any unpainted metal surface on any other grounded rack component. c. to secure the microprocessor in the tool. 40 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 55
    the thermal material will contaminate it. If the thermal material on the microprocessor or heat sink becomes contaminated, contact your service technician. c. Carefully close the microprocessor retainer. d. Rotate the locking lever on the microprocessor socket to the closed and locked position
  • IBM 7870G2U | User Guide - Page 56
    or heat sink becomes contaminated, contact your service technician. a. Remove the plastic protective cover from an optional expansion unit" on page 25 for instructions). Thermal grease Use this information to determine the BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 57
    " on page v and "Installation guidelines" on page 21. 2. Read the documentation that comes with the DIMMs. 3. If the blade server is installed in a BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions). Chapter 3. Installing options 43
  • IBM 7870G2U | User Guide - Page 58
    server cover" on page 24 for instructions). 6. If an expansion unit is installed supports vertical-combination-I/O (CIOv) expansion cards. See http://www.ibm.com/servers/eserver/serverproven/compat/us/ for a list of available I/O expansion cards for your blade server. Make sure that the BladeCenter
  • IBM 7870G2U | User Guide - Page 59
    BladeCenter v Broadcom 10 Gb 2-port Ethernet Expansion Card (CFFh) for IBM BladeCenter v Broadcom 10 Gb 4-port Ethernet Expansion Card (CFFh) for IBM BladeCenter in a BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions). 3. Carefully
  • IBM 7870G2U | User Guide - Page 60
    horizontal-compact-form-factor expansion card Use these instructions to remove a compact-form-factor expansion a BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions). 3. BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 61
    v and "Installation guidelines" on page 21. 2. If the blade server is installed in a BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions). 3. Carefully lay the blade server on a flat, static-protective surface. 4. Open the blade server
  • IBM 7870G2U | User Guide - Page 62
    Removing a CIOv-form-factor expansion card Use these instructions to remove a CIOv-form-factor expansion card in a BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions). 3. BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 63
    " on page v and "Installation guidelines" on page 21. 2. If the blade server is installed in a BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions). 3. Remove the blade server cover (see "Removing the blade server cover" on page 24 for
  • IBM 7870G2U | User Guide - Page 64
    package that contains the storage interface card to any unpainted metal surface on the BladeCenter unit or any unpainted metal surface on any other grounded rack component; then, locations to seat the storage interface card. 50 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 65
    Note: For device-driver and configuration information to complete the installation of the expansion card, see the documentation that comes with the storage interface card. 11. Install the backup battery for the storage interface card into DIMM connector seven (see "Blade server connectors" on page
  • IBM 7870G2U | User Guide - Page 66
    illustrations and installation instructions shows how to The illustrations and removal instructions are similar for other BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 67
    cable; then, pull the cable away from the backup battery. b. Remove the backup battery from the DIMM connector seven by using the instructions to remove a memory module (see "Removing a memory module" on page 33). 8. Remove the backup battery from DIMM connector seven. Chapter 3. Installing options
  • IBM 7870G2U | User Guide - Page 68
    the blade server into the BladeCenter unit (see "Installing the blade server in a BladeCenter unit" on page 56). If you have just connected the power cords of the BladeCenter unit to electrical outlets, you must wait until the BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 69
    Closing the blade server cover Use these instructions for information about how to close the blade server cover. Attention: You cannot insert the blade server into the BladeCenter unit until the cover is installed and closed or an expansion unit is installed. Do not attempt to override this
  • IBM 7870G2U | User Guide - Page 70
    BladeCenter unit Use these instructions to install the blade server in a BladeCenter unit. The following illustration shows how to install a blade server into a BladeCenter unit. The appearance of your BladeCenter see the Installation and User's Guide that comes with the BladeCenter unit. b. If you
  • IBM 7870G2U | User Guide - Page 71
    Note: After the blade server is installed, the service processor in the blade server initializes and synchronizes with BladeCenter T unit (BladeCenter T unit only). For detailed instructions for reinstalling the bezel assembly, see the Installation and User's Guide that comes with the BladeCenter
  • IBM 7870G2U | User Guide - Page 72
    you must upgrade the operating system to support SMP. See Chapter 5, "Installing the supplied by the BladeCenter unit. See the documentation that comes with the BladeCenter unit for information through the Ethernet-compatible I/O modules in the BladeCenter unit. Network signals to and from the
  • IBM 7870G2U | User Guide - Page 73
    . v IBM FastSetup IBM FastSetup is a no-cost software tool that helps simplify the maintenance and deployment of selected IBM BladeCenter chassis, this tool, see http://www-947.ibm.com/ support/entry/portal/docdisplay?lndocid=TOOL-FASTSET. v IBM ServerGuide Setup and Installation CD The ServerGuide
  • IBM 7870G2U | User Guide - Page 74
    IBM BladeCenter Management Module User's Guide, IBM BladeCenter Management Module Command-Line Interface Reference Guide, or IBM BladeCenter Serial over LAN Setup Guide for information and instructions or change the memory settings. 60 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 75
    Rehook INT Select this choice to enable or disable devices from taking control of the boot process. The default is Disable. - Legacy Thunk Support Select this choice to enable or disable UEFI to interact with PCI mass storage devices that are non-UEFI compliant. - Integrated Management Module Select
  • IBM 7870G2U | User Guide - Page 76
    Wake on LAN hardware and software and the operating system supports Wake on LAN functions, you can specify a startup sequence that occur. See the Problem Determination and Service Guide for instructions on running the diagnostic BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 77
    override switch (see the Problem Determination and Service Guide on the Documentation CD for instructions). An administrator password is ibm.com/systems/management/serverguide/sub.html. To download the free image, click IBM Service and Support Site. Note: Changes are made periodically to the IBM
  • IBM 7870G2U | User Guide - Page 78
    supported on all blade server models. The ServerGuide program requires a supported IBM free installation for supported Windows operating You can use the CD to configure any supported IBM blade server model. The setup program provides a BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 79
    stores information about the blade server model, service processor, hard disk drive controllers, and ibm.com/support/. 2. Under Support type, select BladeCenter. 3. Under Popular links, select Operating system installation. 4. Under Choose the system you want instructions for, click BladeCenter HS22
  • IBM 7870G2U | User Guide - Page 80
    you install the blade server in a BladeCenter unit, go to http://www.ibm.com/systems/support/ to download the latest firmware for the blade server. Install the updates, using the instructions that are included with the downloaded files. Important: To avoid problems and to maintain system performance
  • IBM 7870G2U | User Guide - Page 81
    in this document. 1. Go to http://www.ibm.com/support/. 2. Under Select product or service type for support, select BladeCenter. 3. Under Popular links, click Software and device drivers. 4. From the IBM BladeCenter menu, select BladeCenter HS22. 5. From the download categories, click the Networking
  • IBM 7870G2U | User Guide - Page 82
    program Use these instructions to start then, press Enter. 4. Follow the instructions on the screen to change the settings IBM Advanced Settings Utility (ASU) and firmware flash utilities, DSA, and the IBM Director Agent use the Service BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 83
    Potential conflicts with the LAN over USB interface In some situations, the IMM LAN over USB interface can conflict with certain network configurations, applications, or both. For example, Open MPI attempts to use all of the available network interfaces on a server. Open MPI detects the IMM LAN over
  • IBM 7870G2U | User Guide - Page 84
    down to the Service Processor LAN over LAN over USB interface manually The IMM using the installation wizard opens and guides you through the unknown RNDIS device in the device manager. IBM provides a Windows INF file that identifies BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 85
    . For Windows 2008: Go to Computer Management, then Device Manager and find Update 2 and SLES10 Service Pack 2, support the LAN over manual configuration. For information about configuring LAN over USB on specific Linux distributions, see the IBM white paper Transitioning to UEFI and IMM on the IBM
  • IBM 7870G2U | User Guide - Page 86
    is configured to come up with an IP address in the 169.254.xxx.xxx range each time that the operating system is booted. 72 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User
  • IBM 7870G2U | User Guide - Page 87
    on the front of the blade server to associate the BladeCenter unit CD drive with the blade server. 2. Insert the CD, and restart the blade server. If the CD does not start, see "ServerGuide problems" on page 76. 3. Follow the instructions on the screen to complete the following tasks: a. Select your
  • IBM 7870G2U | User Guide - Page 88
    document. 1. Go to http://www.ibm.com/systems/support/. 2. Under Select product or service type for support, click BladeCenter. 3. Under Popular Links, click Operating system installation. 4. Under Choose the system you want instructions for, click BladeCenter HS22. 5. Under the Installation, select
  • IBM 7870G2U | User Guide - Page 89
    , reinstall the blade server in the BladeCenter unit, and then restart the blade server. If the blade server does not start after you have performed the preceding actions, see the Problem Determination and Service Guide for your blade server on the IBM Documentation CD. Diagnostic tools overview Use
  • IBM 7870G2U | User Guide - Page 90
    ibm.com/systems/management/. For more information about diagnostic programs and error messages, see the Problem Determination and Service Guide for your blade server. Note: If you are unable to find the system-error logs in the blade server firmware code, view the system-event log in the BladeCenter
  • IBM 7870G2U | User Guide - Page 91
    system CD is supported by the ServerGuide program. See the ServerGuide Setup and Installation CD label for a list of supported operating-system versions Make sure that the operating system is supported on the blade server. If the operating system is supported, either no logical drive is defined (
  • IBM 7870G2U | User Guide - Page 92
    78 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User's Guide
  • IBM 7870G2U | User Guide - Page 93
    available to IBM Support quickly and efficiently. IBM service technicians can start working on your solution as soon as you have completed and submitted an Electronic Service Request. You can solve many problems without outside assistance by following the troubleshooting procedures that IBM provides
  • IBM 7870G2U | User Guide - Page 94
    , and access various administrative services. Software service and support Through IBM Support Line, you can get telephone assistance, for a fee, with usage, configuration, and software problems with your IBM products. 80 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User's Guide
  • IBM 7870G2U | User Guide - Page 95
    telephone numbers. In the U.S. and Canada, call 1-800-IBM-SERV (1-800-426-7378). Hardware service and support You can receive hardware service through your IBM reseller or IBM Services. To locate a reseller authorized by IBM to provide warranty service, go to and click Business Partner Locator. For
  • IBM 7870G2U | User Guide - Page 96
    82 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User's Guide
  • IBM 7870G2U | User Guide - Page 97
    right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not
  • IBM 7870G2U | User Guide - Page 98
    of Sony Computer Entertainment, Inc supported drives that are available from IBM IBM is not responsible for replacement of a device that has exceeded its maximum guaranteed number of program/erase cycles, as documented in the Official Published Specifications for the device. 84 BladeCenter HS22
  • IBM 7870G2U | User Guide - Page 99
    or warranties with respect to non-IBM products. Support (if any) for the non-IBM products is provided by the third party, not IBM. Some software might differ from its retail version (if available) and might not include user manuals or all program functionality. Particulate contamination
  • IBM 7870G2U | User Guide - Page 100
    to the following address: Information Development IBM Corporation 205/A015 3039 E. Cornwallis you send information to IBM, you grant IBM a nonexclusive right to connection. Contact an IBM representative or reseller for instruction manual, may cause harmful interference to radio 86 BladeCenter HS22
  • IBM 7870G2U | User Guide - Page 101
    and connectors must be used in order to meet FCC emission limits. IBM is not responsible for any radio or television interference caused by using other from a nonrecommended modification of the product, including the fitting of non-IBM option cards. Attention: This is an EN 55022 Class A product.
  • IBM 7870G2U | User Guide - Page 102
    Regulations, Abteilung M372 IBM-Allee 1, 71139 Ehningen, Germany Telephone: +49 7032 15 2941 Email: [email protected] Generelle Informationen: Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse A. 88 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User's Guide
  • IBM 7870G2U | User Guide - Page 103
    Japan VCCI Class A statement This is a Class A product based on the standard of the Voluntary Control Council for Interference (VCCI). If this equipment is used in a domestic environment, radio interference may occur, in which case the user may be required to take corrective actions. Japan
  • IBM 7870G2U | User Guide - Page 104
    Taiwan Class A compliance statement 90 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User's Guide
  • IBM 7870G2U | User Guide - Page 105
    55 opening 24 BladeCenter GPU expansion (BGE) unit LED 19 BladeCenter HS22 specifications 7 buttons option, SAS 27 DSA, sending data to IBM 80 E electronic emission Class A notice 87 and software requirements 4 hardware problems 75 hardware service and support telephone numbers 81 help from
  • IBM 7870G2U | User Guide - Page 106
    69 description 68 Linux driver 71 manual configuration of 70 settings 68 Windows 7, 9 supported 7, 29 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User's Guide problems hardware 75 problems, solving 75 processor summary information 60 product data 60 product service, IBM
  • IBM 7870G2U | User Guide - Page 107
    SAS hard disk drives support 9 save settings 60 SCSI 27 sending diagnostic data to IBM 80 Serial Attached SCSI 60 software service and support telephone numbers 81 specifications BladeCenter HS22 7 start options 39 trademarks 83 troubleshooting Light path diagnostics 75 Problem isolation tables 75
  • IBM 7870G2U | User Guide - Page 108
    94 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User's Guide
  • IBM 7870G2U | User Guide - Page 109
  • IBM 7870G2U | User Guide - Page 110
    Part Number: 00D9283 Printed in USA (1P) P/N: 00D9283
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
BladeCenter HS22
Type 7870, 1936, and 1911
Installation and User's Guide
±²³