IBM 7979BEU User Manual - Page 104
Options, Control, Slot/Device, Information, Settings, Address, Static, selection, Linux, Baseboard,
View all IBM 7979BEU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
- CPU Options Select this choice to specify the system cache type, and to enable or disable hyper-threading, the pre-fetch queue, and Virtualization Technology for all microprocessors in the server. Virtualization Technology enables the microprocessor to appear to be a dedicated processor to each running application in the system. - PCI Bus Control Select this choice to view the system resources that are used by installed PCI (PCI Express or PCI-X) devices. You can change the master latency timer value, view and configure PCI interrupt routing, and enable or disable the loading and execution of ROM code per PCI slot (see message 1801 in the Problem Determination and Service Guide on the IBM System x Documentation CD). - PCI Slot/Device Information This choice is available only if an optional Remote Supervisor Adapter II SlimLine is installed. Select this choice to view the PCI device information, including PCI bus number, for each PCI slot. Highlight a slot; then, press Enter to view the details of the PCI devices that are connected to the slot. Follow the instructions on the screen to page forward or backward through the devices that are connected to the slot. - RSA II Settings This choice is available only if an optional Remote Supervisor Adapter II SlimLine is installed Select this choice to configure the settings for the Remote Supervisor Adapter II SlimLine. - MAC Address This is a nonselectable item that displays the MAC address of the Remote Supervisor Adapter II SlimLine. - DHCP IP Address This is a nonselectable item that displays the current IP address of the Remote Supervisor Adapter II SlimLine. - DHCP Control Specify whether to use the static IP address or use DHCP to dynamically assign the IP address for the Remote Supervisor Adapter II SlimLine. If DHCP times out while it is assigning an IP address, the system defaults to the static IP address. - Static IP Settings Define the static IP address, subnet mask, and gateway address for the Remote Supervisor Adapter II SlimLine. - OS USB selection Select the operating system to use to provide USB support for remote access to the Remote Supervisor Adapter II SlimLine. The remote keyboard and mouse access the Remote Supervisor Adapter II SlimLine through a USB port. Linux OS is the default setting. - Baseboard Management Controller (BMC) setting Select this choice to change settings for the BMC. - BMC Firmware Version This is a nonselectable menu item that displays the BMC firmware version. 88 System x3650 Type 7979: User's Guide