Icom IP100H Instruction Manual

Icom IP100H Manual

Get Icom IP100H PDF manuals and user guides View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals

Icom IP100H manual content summary:

  • Icom IP100H | Instruction Manual - Page 1
    Confirm the system requirements in these instructions. Step 2 CS-IP100H installation Install the CS-IP100H following these instructions. Step 3 USB driver installation Install the USB driver following the optional programming cable's installation guide. Step 4 Connection Connect the transceiver and
  • Icom IP100H | Instruction Manual - Page 2
    "Settings" charm, then click "Control Panel," and then click "Uninstall a program." 3. Click "Icom CS-IP100H #11," and then click "Uninstall." LLIf "User Account Control" is displayed, click to continue. 4. Follow the instructions on the screen to uninstall. Reinstalling the software Once the
  • Icom IP100H | Instruction Manual - Page 3
    of the firmware page on the Icom website. Carefully read the guide, before installing the driver. https://www.icomjapan.com/support/firmware_driver/ Connection NOTE: Before connecting or disconnecting the cables, turn OFF the transceiver. Connect the optional programming cable and OPC-2144 plug
  • Icom IP100H | Instruction Manual - Page 4
    For your reference DDCOM Port Searching NOTE: Before searching for the COM port, confirm the transceiver is turned ON and the transceiver and the PC are correctly connected together. To Confirm the COM port number 1. Click the folder icon on the taskbar. Select "Search" in the menu to
  • Icom IP100H | Instruction Manual - Page 5
    . Basically, the IP100H firmware is automatically updated through the controller. However, you can also manually update the firmware through the CS-IP100H. 1. Click " latest firmware from the Icom website at the following URL: https://www.icomjapan.com/support/firmware_driver/ Firmware is important
  • 1
  • 2
  • 3
  • 4
  • 5
–
1
–
INSTRUCTION MANUAL
CLONING SOFTWARE
CS-IP100H
Thank you for choosing this Icom product.
READ
ALL INSTRUCTIONS
carefully and completely
before using this product.
The CS-IP100H is a software application to setup the IP100H from your PC.
To use the software, a computer system and some items described in “System requirements” are required.
L
The instructions are based on using Microsoft
Windows 10.
•
Operating System (OS)
Microsoft Windows 10 (32/64bit)
Microsoft Windows
8.1 (32/64bit)*
* Except for Microsoft Windows RT.
•
USB port
A USB 1.1 or 2.0 port
L
Icom is not responsible for problems using a PC with
an above OS installed.
•
Cables
OPC-478UC
PROGRAMMING
CABLE
or
OPC-478UC-1
PROGRAMMING
CABLE
OPC-2144
PLUG
ADAPTER
CABLE
System requirements
(As of October 2021)
NOTE:
Confirm your OPC-478UC has the letter “B”
on its label. The cable with a label without “B” is not
usable with Windows 8.1 and 10.
Operation note
• The contents of this sheet, the software associated
with the CS-IP100H, and the appearance of the
CS-IP100H are all subject to change without notice.
• The displays, indications, or operations may differ
slightly, depending on your system settings, type of
OS, and its service pack level.
Procedure outline
To setup from a PC, follow the steps described below first.
Step 1 Preparations
Confirm the system requirements in these instructions.
Step 2 CS-IP100H installation
Install the CS-IP100H following these instructions.
Step 3 USB driver installation
Install the USB driver following the optional programming cable’s installation guide.
Step 4 Connection
Connect the transceiver and a PC following these instructions, and then turn ON the transceiver.