Icom MR-1010RII Instruction Manual

Icom MR-1010RII Manual

Get Icom MR-1010RII PDF manuals and user guides View all Icom MR-1010RII manuals
Add to My Manuals
Save this manual to your list of manuals

Icom MR-1010RII manual content summary:

  • Icom MR-1010RII | Instruction Manual - Page 1
    INSTRUCTION MANUAL MARINE RADAR MR-1010R™
  • Icom MR-1010RII | Instruction Manual - Page 2
    SYSTEM COMPONENTS MODEL NAME MR-1010RII DISPLAY UNIT 10.4-inch Color LCD SCANNER UNIT EX-2714 (Radome nuts (M6 5 10. Spring washers (M6 10 11. Flat washers (M6 10 12. Instruction manual 1 13. Operating guide 1 14. EX-2714 template 1 15. Display unit template 1 zzScanner unit (EX-2714)
  • Icom MR-1010RII | Instruction Manual - Page 3
    you for choosing this Icom product. The MR-1010RII marine radar is designed and built with Icom's state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. IMPORTANT READ ALL INSTRUCTIONS carefully and completely before
  • Icom MR-1010RII | Instruction Manual - Page 4
    adjustments MUST be made by a qualified electronics technician at your Marine Navigation Dealer. For qualified electronics technician only: RRDANGER: harmful, particularly to your eyes. To avoid harmful radiation, turn OFF the radar's power before working on the scanner unit. DO NOT use or place
  • Icom MR-1010RII | Instruction Manual - Page 5
    Own menu 46 ■■Status menu 46 ■■Port Monitor menu 46 ■■Scanner Monitor menu 46 9. BASIC RADAR THEORY 47-49 ■■Sidelobe echoes 47 ■■Indirect echoes 47 ■■Multiple echoes 48 ■■Minimum range 48 ■■ 60 NDEX 61 (Appendices) ••Display mounting bracket template ••MR-1010RII OPERATING GUIDE iv
  • Icom MR-1010RII | Instruction Manual - Page 6
    zzHold down for 1 second to turn ON the power save function. The radar for the TX interval scan is fixed at 10 revolutions. (p. 13) LLSelect the Menu screen. (p. 39) y ENTER KEY* *Described as [ENTER]/[ ] in this manual. Push to select the target and display the ARPA, AIS, DSC, TLL, or WPT
  • Icom MR-1010RII | Instruction Manual - Page 7
    1 PANEL DESCRIPTION i E BL2 (VRM2) KEY [EBL2 (VRM2)]/ [ ] (pp. 17-20) zzPush to display the EBL2 and the VRM2. EBL: Electronic Bearing Line VRM: Variable Range Marker ••Push [t] or [u] to adjust the EBL selector, or push [p] or [q] to adjust the VRM selector. Then push [ENTER]/[ ]
  • Icom MR-1010RII | Instruction Manual - Page 8
    Description T True bearing M Magnetic bearing y TUNING MODE INDICATOR (p. 9) Displays the tuning mode and the tuning level. Indicator Description Auto Auto tuning Manual Manual tuning ••"TUNE (AUTO)" is displayed when the "TUNE" item in the Video menu is set to "Auto" or "TUNE (MAN)" is
  • Icom MR-1010RII | Instruction Manual - Page 9
    ARPA, TLL, Waypoint, or, DSC. LLRefer to each section in this manual for details on the displayed information in each function. !9 CURSOR INFORMATION  auto acquire function. @2 PLAIN POSITION INDICATOR SCOPE AREA Displays the radar picture and plots the data such as vessels, bases, and so
  • Icom MR-1010RII | Instruction Manual - Page 10
    1 PANEL DESCRIPTION ■■Screen (Continued) #2 #38 #4 @8 #1 #5 @9 #0 !6 @0 @8 OWN SHIP VECTOR INDICATOR (p. 6) Displays the vector of your own ship. @9 PARALLEL INDEX LINES (p. 17)  Displayed when the Parallel Index line (PI) function is in use. Used to measure the direction and interval of
  • Icom MR-1010RII | Instruction Manual - Page 11
    ZONE (p. 14) #8 POPUP MESSAGE (p. 32) 11 Displays the alarm zone. • Displays when the alarm function is in use. A message pops up when the radar received the data of the target, such as a DSC, or favorite AIS 12 #7 WARNING MESSAGE (p. 22) that you have selected. •• Push [Enter]/[ ] to
  • Icom MR-1010RII | Instruction Manual - Page 12
    the Power ON or OFF Refer to Chapter 14 in this manual about the installation and connections. (pp. 54-60) Turning in the "TUNE" item of the Video menu. NOTE: At the first turning ON the MR-1010RII or after performing Factory Reset, the Initial Setting screen is displayed. Push [p] or [q] to
  • Icom MR-1010RII | Instruction Manual - Page 13
    2 BASIC OPERATION ■■Adjusting brilliance and color DDAdjusting the display brilliance The brilliance of the screen can be adjusted. When you require continuous operation, but not constant viewing, a lower setting can increase the life of the LCD. 1. Push [BRILL]/[ ] to open the Brilliance/Color
  • Icom MR-1010RII | Instruction Manual - Page 14
    may hinder radar reception (sea clutter, precipitation interference and echoes from other radar). See also Basic Radar Theory in ( ) disappears. Small echoes Adjust RAIN control DDManual tuning The receiver tuning can be manually adjusted. (MENU w Video w Tune) 1. Push [MENU]/[ ] to display the
  • Icom MR-1010RII | Instruction Manual - Page 15
    the upper right of the screen. 13 Normal view 14 Zoomed view 15 ■■Interference Rejection function 16 Radar interference may appear when another (MENU w Video w IR) 17 vessel's radar is operating on the same frequency band in close proximity. The Interference Rejection 18 (IR) function
  • Icom MR-1010RII | Instruction Manual - Page 16
    2 BASIC OPERATION ■■Echo Stretch function The blips can be magnified electronically for easier viewing of small targets. 1. Push [MENU]/[ ] to display the Menu screen. 2. Push [t] or [u] to select the Video menu. 3. Push [p] or [q] to select the "Echo Stretch" item. 4. Push [ENTER]/[ ] to enter the
  • Icom MR-1010RII | Instruction Manual - Page 17
    2 BASIC OPERATION ■■Trail function The trail function memorizes echoes continuously or at constant intervals. This is useful for watching other vessels' tracks, approximate relative speed and so on. DDUsing the Trail function 1. Push [TRAILS]/[ ] to turn ON the Trail function. ••The trail
  • Icom MR-1010RII | Instruction Manual - Page 18
    2 BASIC OPERATION ■■Power save function The power save function conserves the vessel's battery power by pausing the transmission. The standby (pausing) times are selectable (rotation number is fixed to 10). For example, when 1 minute is selected, the scanner rotates 10 revolutions, then stops for 1
  • Icom MR-1010RII | Instruction Manual - Page 19
    2 BASIC OPERATION ■■Ship speed indication When the ship speed data in NMEA 0183 format is (MENU w Initial w Speed Unit) applied, the radar can display the ship speed. 1 1. Push [MENU]/[ ]. 2. Push [t] or [u] to select the Initial menu. 2 3. Push [p] or [q] to select the "Speed Unit" item.
  • Icom MR-1010RII | Instruction Manual - Page 20
    vessel's speed is less than 3 knots, direction accuracy falls. Moreover, the position accuracy or the current actual course may vary, therefore the radar may display incorrect direction. 6. Push [ENTER]/[ ] to save the setting. 7. Push [MENU]/[ ] to exit the Menu screen. DDSetting the bearing type
  • Icom MR-1010RII | Instruction Manual - Page 21
    and "Manual" are selectable. 6. Push [ENTER]/[ ] to save the setting. 7. When the "Manual" option is selected in step 4, 4 push [q] to select the "Manual Variation," is received, use the last data for the difference. The MR-1010RII memorize the data until you turn OFF the power. 8 9 10 11 12
  • Icom MR-1010RII | Instruction Manual - Page 22
    3 DISTANCE AND DIRECTION MEASUREMENTS ■■Distance measurement Various ways to measure the distance are provided with this radar. LLYou can select a distance unit from nautical miles (NM), or kilometers (kn) in the Initial menu (p. 45). TYPE Fixed range ring (RING) Parallel index lines (
  • Icom MR-1010RII | Instruction Manual - Page 23
    5. Push [EBL1 (VRM1)]/[ ] to clear the EBL1 and VRM1. 6. Push [EBL2 (VRM2)]/[ ] to clear the EBL2 and VRM2. ■■Bearing and Distance measurement This radar has two Electronic Bearing Lines (EBL) to indicate the target direction from your vessel or a target. DDUsing both the EBL and VRM 1. Move
  • Icom MR-1010RII | Instruction Manual - Page 24
    3 DISTANCE AND DIRECTION MEASUREMENTS ■■Advanced measurements Using both Electronic Bearing Lines (EBL) and both Variable Range Markers (VRM), the following advanced measurements can be made. DDMeasuring the distance and direction between two targets 1. Move the cursor onto the desired target.
  • Icom MR-1010RII | Instruction Manual - Page 25
    3 DISTANCE AND DIRECTION MEASUREMENTS DDMeasuring the distance and course from a waypoint 1. Display a waypoint as described on page 14. 2. Push [EBL1 (VRM1)]/[ ] to display the EBL1 and VRM1, and then set the VRM1 and EBL1 to the waypoint. ••Push [t] or [u] to rotate the Electronic Bearing
  • Icom MR-1010RII | Instruction Manual - Page 26
    case, push [+] one or more times until the alarm icon returns to " ." DDEntering the power save mode The Alarm function is also available when the MR-1010RII is in the power save mode. zzHold down [TX (SAVE)]/[ ] for 1 second while the Alarm function is ON. ••The power save mode is activated
  • Icom MR-1010RII | Instruction Manual - Page 27
    4 ALARM FUNCTION ■■Setting Zone alarm type A zone alarm sounds when the target comes into the (MENU w System w Zone Alarm1) zone, or when the target goes out of the zone. (p. 13) (MENU w System w Zone Alarm2) 1 1. Push [MENU]/[ ], and then push [t] or [u] to select the System menu. 2 2.
  • Icom MR-1010RII | Instruction Manual - Page 28
    Plotting Aids (ARPA) function is designed to help prevent a collision with other vessels or landmasses. The radar automatically acquires and plots other vessels and landmasses that are in the set watch area. It automatically calculates the closest point of approach (CPA), and
  • Icom MR-1010RII | Instruction Manual - Page 29
    displayed with the orange colored circle 2 Selected target is displayed with corners of the square 3 Selected, started to acquire automatically or manually. 4 Acquired target Approximately 1 minute after the acquirement is started, the dotted circle icon changes to a circle, and the vector of
  • Icom MR-1010RII | Instruction Manual - Page 30
    . (MENU w ARPA ) Function (Default: ON) • OFF: Turns OFF the ARPA (Automatic Radar Plotting Aid) function. • ON: Turns ON the ARPA function. Auto Acquire (Default: OFF) Sets whether the MR-1010RII automatically acquires targets or not. • OFF: Does not automatically acquire a target. • ON
  • Icom MR-1010RII | Instruction Manual - Page 31
    by displaying the Base Station 3 received data on a plotter or a radar screen. Vessel Information 4 There are 7 types of AIS stations, vessels, 2. Push [ENTER]/[ ] to select the target. Activating the sleeping target manually • The corners of a square appear on the selected target and the
  • Icom MR-1010RII | Instruction Manual - Page 32
    6 AIS RECEIVER ■■Description of the AIS display e w q r q AIS indicator: Displayed when a valid VDM sentence is input from the [NMEA1] (AIS) port. The indicator disappears if the AIS signal is not received for 6 minutes. w Selected AIS target: Four corners of a square are displayed when a
  • Icom MR-1010RII | Instruction Manual - Page 33
    6 AIS RECEIVER DDStatus of the vessel icon DDPlots (AIS) There are 5 kinds of target vessel status. The plot displays the activated target, SAR, SART, MOB, or EPIRB's past positions as 5 dots, during 1 Sleeping target: The AIS signal has been updated (received), each specified tracking
  • Icom MR-1010RII | Instruction Manual - Page 34
    6. Push [MENU]/[ ] to exit the Menu screen. DDAIS menu (MENU w AIS) Display (Default: ON) Turns the AIS Display function ON or OFF when the MR-1010RII is in Trasmitting (TX) mode. • OFF: Turn OFF the AIS display function. • ON: Turn ON the AIS display function. Track (Default: OFF) The plot
  • Icom MR-1010RII | Instruction Manual - Page 35
    6 AIS RECEIVER Erase Lost Target (Default: ON) Erases all of the Lost targets at the same time. When there are no lost targets, this setting grays out. 1. Push [ENTER]/[ ]. 2. Push [t] to select . 3. Push [ENTER]/[ ] again to clear all of the Lost targets on the screen. About "Lost Target":
  • Icom MR-1010RII | Instruction Manual - Page 36
    is received. • OFF: Turns OFF the Safety Message function. • ON: Turns ON the Safety Message function. Favorite AIS (Default: ON) Sets whether the MR-1010RII notifies that the Specified MMSI target gets into the specified range from your vessel, or not. • OFF: Turns OFF the Favorite AIS function
  • Icom MR-1010RII | Instruction Manual - Page 37
    OTHER FUNCTIONS ■■Receiving DSC Information The radar can plot received DSC information from DDDSC are displayed. 10 11 12 DSC Display (Default: Symbol & Pop-up) 13 Sets whether the MR-1010RII displays the DSC information or not. 14 • OFF: • Symbol: DSC information is not displayed.
  • Icom MR-1010RII | Instruction Manual - Page 38
    7 OTHER FUNCTIONS ■■TLL function The TLL (Target Latitude and Longitude) function marks the target on the display or outputs its data to an external unit. DDTLL setting 1. Push [MENU]/[ ] to display the Menu screen. 2. Push [t] or [u] to select the System menu. 3. Push [p] or [q] to select the "TLL
  • Icom MR-1010RII | Instruction Manual - Page 39
    While holding down [BRILL]/[ ], push [ ] to 11 turn ON the power. ••After the opening screen, the standby screen is 12 displayed. While the MR-1010RII is in the simulation mode, "Simulation Mode" is displayed in the upper of the screen. 13 2. Push [TX (SAVE)]/[ simulation mode. ] to operate
  • Icom MR-1010RII | Instruction Manual - Page 40
    7 OTHER FUNCTIONS ■■Antenna rotation speed The antenna rotation speed can be selected between Normal (36 rpm) and Slow (24 rpm) in the 1/2, 1/4 or 1/8 range. 1. Push [MENU]/[ ] to display the Menu screen. 2. Push [t] or [u] to select the Initial menu. 3. Push [p] or [q] to select the "Antenna
  • Icom MR-1010RII | Instruction Manual - Page 41
    FUNCTIONS ■■Heading adjustment If the heading marker line differs from the exact bow (MENU w Initial w Heading Adjust) direction, adjust the heading marker line manually. This may be helpful when the scanner has not been 1 mounted correctly in the line with the bow. 2 1. Line up the bow of
  • Icom MR-1010RII | Instruction Manual - Page 42
    ] to exit the Menu screen. (MENU w Initial w Range) • Option selection mode Push [t] or [u] to turn ON or OFF ■■Save and load settings The MR-1010RII can save three different settings for different operators or different situations, and immediately change from one to another. The save or load
  • Icom MR-1010RII | Instruction Manual - Page 43
    7 OTHER FUNCTIONS ■■Resetting The MR-1010RII has two reset modes. One is "Setting Reset" and menu. 3. Push [p] or [q] to select the "Setting Reset" 5 item. LLThe Reset items are grayed out if the radar is in the 6 TX mode. Push [TX (SAVE)]/[ ] in this case. 4. Push [ENTER]/[ ] to enter the
  • Icom MR-1010RII | Instruction Manual - Page 44
    ). ARPA/AIS Brill* (Default: 3) Sets the Brilliance of the ARPA and AIS symbols to 1 (dark), 2 (normal), or 3 (bright). ••ARPA: Automatic Radar Plotting Aid ••AIS: Automatic Identification System EBL/VRM/PI Brill* (Default: 3) Sets the Brilliance of the EBL (Electronic Bearing Lines), VRM
  • Icom MR-1010RII | Instruction Manual - Page 45
    scale. • Wide: The PPI area is the whole screen. Auto Hide Information (Default: OFF) Sets whether after no operation is performed for 10 seconds, the MR-1010RII hides the outside of the scale or not. This setting is effective only when the "PPI Area" item is set to "Wide." • OFF: Always
  • Icom MR-1010RII | Instruction Manual - Page 46
    reach the limit. Function (Default: ON) • OFF: Turns OFF the ARPA (Automatic Radar Plotting Aid) function. • ON: Turns ON the ARPA function. Auto Acquire (Default: OFF) Sets whether the MR-1010RII automatically acquires targets or not. • OFF: Does not automatically acquire a target. • ON
  • Icom MR-1010RII | Instruction Manual - Page 47
    AIS target to an activated target. • 5 to 180°: Select the angle with your vessel. New Target Warning (Default: OFF) Sets whether the MR-1010RII gives a warning when the Auto Activate function automatically changes the sleeping AIS target to an activated target, or not. • OFF: Does not give
  • Icom MR-1010RII | Instruction Manual - Page 48
    : AUTO) Automatic tuning selection. • "TUNE (AUTO)" is displayed in the upper right corner of the screen. Manual tuning selection. • "TUNE (MAN)" is displayed in the upper right corner of the screen. Manual TUNE When "Auto" is selected in the "TUNE" item, this setting is disabled. 1. Push [ENTER
  • Icom MR-1010RII | Instruction Manual - Page 49
    4 while [HL-OFF] is hold down. • Heading Line: Hides the Heading line. the MR-1010RII. • Manual: Manually revises magnetic variation. 5 • All: Hides the Heading line, Rings, and other objects. Use the manual setting for the difference between true North and magnetic North. 6 Set the
  • Icom MR-1010RII | Instruction Manual - Page 50
    GPS option to display the cursor latitude and longitude when the evessel's speed is less than 3 knots. TX Inhibit (Default: OFF) Selects whether the MR-1010RII uses TX inhibit or not. TX Inhibit Start (Default: 0°) Sets the start point of the TX inhibit area to between 0 and 359°. TX Inhibit
  • Icom MR-1010RII | Instruction Manual - Page 51
    menu 5 Resets the settings in the Menu screen other than the settings in the Initial menu. You can reset only 6 while the MR-1010RII is in the Standby mode. (p. 38) 1. Push [ENTER]/[ ]. 7 2. Push [t] to select . 3. Push [ENTER]/[ ] to reset the settings. 8 Factory Reset 9 Resets the
  • Icom MR-1010RII | Instruction Manual - Page 52
    9 BASIC RADAR THEORY Radar uses a form of electromagnetic radiation that can be reflected off a large vessel, bridge, or other metal objects that are in proximity. Because of this property,
  • Icom MR-1010RII | Instruction Manual - Page 53
    targets. 9 the return echoes can be received and their distance measured. 10 11 Vertical beam width 12 13 This target cannot be detected by radar. Pulse length Pulse starting point The target in this area cannot be detected. 14 15 16 ■■Blind and Shadow sectors 17 Blind or Shadow sectors
  • Icom MR-1010RII | Instruction Manual - Page 54
    9 BASIC RADAR THEORY ■■Target resolution Target resolution is determined by the horizontal beam width and transmit pulse width. Sometimes it is difficult to detect two targets that
  • Icom MR-1010RII | Instruction Manual - Page 55
    of the top of the scanner unit will cause a considerable drop in radar performance. 10 3. Check for cracks or deterioration of the rubber packing 15 ■■Display unit maintenance 16 R W ARNING! BE SURE to turn OFF the radar before working on it. DDCleaning Dirt on the LCD will, in time, leave
  • Icom MR-1010RII | Instruction Manual - Page 56
    may have occured. Turn OFF the power, then consult your dealer or service person. ■■AIS error message list An error message is displayed when a system error is received from the AIS unit. See the AIS unit instructions for details. (Some examples) Message contents AIS: TX MALFUNCTION AIS: ANTENNA
  • Icom MR-1010RII | Instruction Manual - Page 57
    : Microwave Integrated Circuit • Transmitting Tube: Magnetron MAF1421B • Modulator: FET switching • Duplexer: Circulator • Tuning system: Automatic / manual selectable • Intermediate frequency: 60 MHz • IF Band width: 10 MHz, 3 MHz • Dimensions: 640 (W) × 256 (H) × 640
  • Icom MR-1010RII | Instruction Manual - Page 58
    DATA LIST The following external bearing, speed, position, waypoint, variation, and DSC data is (are) required, when you use the radar functions. EXTERNAL DATA INPUT [NMEA1]*1 connector [NMEA2]*1 connector "THS," "HDG," "HDM," "HDT" "VDM", "ALR" "VDO"*2 "RMC," "GGA," "GLL," "GNS," "VTG
  • Icom MR-1010RII | Instruction Manual - Page 59
    shown in the diagram. CAUTION: An incorrect cable connection will damage the display unit. ■■Ground connection To prevent electrical shocks and other problems, ground the display unit through the [GND] terminal. For best results, connect a heavy gauge wire or strap to the nearest grounding point
  • Icom MR-1010RII | Instruction Manual - Page 60
    near the wheel in the cabin so that an operator may easily view the radar screen while facing the bow. zzTo minimize interference, KEEP the unit perform maintenance or adjustment after installation. zzSelect a location that can support the weight of the display unit. zzDO NOT select areas subject
  • Icom MR-1010RII | Instruction Manual - Page 61
    14 INSTALLATION AND CONNECTIONS DDWall Mounting The display unit can be mounted to a flat surface, such as an instrument panel, using the M6 mounting 4. Slide the display unit through the hole. 5. Attach the four corners of the display unit 1 bolts. using the flat washers, spring washers, and
  • Icom MR-1010RII | Instruction Manual - Page 62
    . ••The unit should be placed as high as possible on the vessel to obtain best performance with maximum range. ••If you install two or more radar in one vessel, install one above, and the other(s) below. ••The mounting surface must be parallel with the vessel's waterline. ••If the height is
  • Icom MR-1010RII | Instruction Manual - Page 63
    14 INSTALLATION AND CONNECTIONS ■■Wiring the EX-2714 system cable CAUTION: NEVER cut the supplied system cable. 1. Using a hex head wrench*, loosen the four bolts on the bottom of the scanner unit, and open the unit. * A Phillips head or flat head screwdriver is also usable. 2. Loosen the
  • Icom MR-1010RII | Instruction Manual - Page 64
    14 INSTALLATION AND CONNECTIONS ■■Installing the UX-252 Video output unit When an optional UX-252 is installed, the MR-1010RII can be connected to an external display or a PC monitor with a VGA connector. LLThe monitor requires the resolution of 640 × 480 or higher. R W ARNING! BE
  • Icom MR-1010RII | Instruction Manual - Page 65
    14 INSTALLATION AND CONNECTIONS 6. Install the UX-252 on the display's main board using the four screws supplied with the UX-252. (Fig. 4) ••Before tightening the screws, be sure to connect the UX-252's connector to the display unit's connector. 7. Secure the cable to the UX-252 with a cable tie. (
  • Icom MR-1010RII | Instruction Manual - Page 66
    Error Messages 51 External data list 53 F Features i Fixed range rings 3, 17 Front panel 1 G Gain 9 GPS 15, 53 M Maintenance 50 Manual speed 44 Manual tuning 9 Measurement 17 MENU screen 39 MODE key 1, 7 N North Mark 4 O OFF CENTER key 1, 10 Options Menu screen 39 Specifications 52
  • Icom MR-1010RII | Instruction Manual - Page 67
    Cut here Display mounting bracket template 99.8 mm (3 15/16 inch) 256 mm (10 3/32 inch) 199.6 mm (7 27/32 inch) 92 mm (3 5/8 inch) 62 mm (2 7/16 inch) 31 mm (1 7/32 inch) 7 mm (d) (2 1/4 inch (d)) 7 mm (d) (1/4 inch (d))
  • Icom MR-1010RII | Instruction Manual - Page 68
  • Icom MR-1010RII | Instruction Manual - Page 69
    MR-1010R OPERATING GUIDE Refer to the Instruction Manual for details about the ARPA, the AIS receiver, and DSC functions, ■ Display information Screen range readout Fixed ring range readout Mode indicator*1 Heading indicator*7, *8 Reference
  • Icom MR-1010RII | Instruction Manual - Page 70
    Mode Zone Alarm 1/2 Zone Alarm Level OFF Center Mode Save Time Bearing Mode Variation Manual Variation Bearing Reference Speed Input Manual Speed Manual SET Manual Drift TLL Mode STBY Mode Rev. Video TUNE Manual Tune Dynamic Range IR Echo Stretch Pulse Width SEA Curve Initial Distance Unit Speed
  • Icom MR-1010RII | Instruction Manual - Page 71
    MEMO
  • Icom MR-1010RII | Instruction Manual - Page 72
    A-7361D-1EX Printed in Japan © 2017 Icom Inc. Printed on recycled paper with soy ink. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
MR-1010R
™
MARINE RADAR
INSTRUCTION MANUAL