Insignia NS-3IN1MT50C User Manual (English)
Insignia NS-3IN1MT50C Manual
 |
View all Insignia NS-3IN1MT50C manuals
Add to My Manuals
Save this manual to your list of manuals |
Insignia NS-3IN1MT50C manual content summary:
- Insignia NS-3IN1MT50C | User Manual (English) - Page 1
USER GUIDE Wood Finish and Glass 3-in-1 TV Stand for TVs up to 52"/135 lbs. NS-3IN1MT50C/NS-3IN1MT50C-C SAFETY INFORMATION AND SPECIFICATIONS .2 PACKAGE CONTENTS: PARTS 4 PACKAGE CONTENTS: HARDWARE 5 ASSEMBLY INSTRUCTIONS 7 CARE AND MAINTENANCE 29 Before using your new product, please read these - Insignia NS-3IN1MT50C | User Manual (English) - Page 2
× 48 × 21.1 in. (139.7 x 122 x 53.6 cm) 32 inch (81.3 cm) 8.7 inch (22.2 cm) 9.3 inch (23.5 cm) 9.3 inch (23.5 cm) 21.1 inch (53.6 cm) Long support: 48" high (122 cm) Back frame: 21.7" high (55.2 cm) 15 inch (38 cm) 40 inch (101.6 cm) 55 inch (139.7 cm) 16.3 inch (41 - Insignia NS-3IN1MT50C | User Manual (English) - Page 3
3-in-1 TV STAND Tools needed: Phillips screwdriver Edge-to-edge stud finder Power drill Hammer 1/2" Socket wrench Level Pencil 3/8" drill bit (for tipping restraint) 3/16" wood drill bit or 7/16" masonry drill bit www.insigniaproducts.com 3 - Insignia NS-3IN1MT50C | User Manual (English) - Page 4
your new TV stand. A Left side frame (1) B Right side frame (1) C Short back frame (1) 3-in-1 TV STAND D Long rear support (1) G Middle crossbar (1) I Bottom brace (1) K Top glass (1) E Top crossbar (1) F Top stringer (1) H Middle stringer (1) J Bottom stringer (1) L Middle glass shelf - Insignia NS-3IN1MT50C | User Manual (English) - Page 5
3-in-1 TV STAND PACKAGE CONTENTS: HARDWARE Note: You may receive extra hardware.Note: You may receive extra hardware. Make sure that you have all the hardware necessary to assemble your new TV stand. Label Hardware Qty. Label Hardware Qty. R Cable clip X 2 Lock washer 32 Y Flat washer - Insignia NS-3IN1MT50C | User Manual (English) - Page 6
Bolt M8 × 16 mm 4 XX Flat washer M6/M8 4 PP 4 Bolt M8 × 40 mm Sellpoints Video Instruction Guide Go to http://vig.sellpoints.com/insignia/default/ISGBBY00001.html to view step-by-step instructional videos for assembling and installing your product. 1 2 3 4in 10 20 30 40 50 60 70 80 90 - Insignia NS-3IN1MT50C | User Manual (English) - Page 7
3-in-1 TV STAND ASSEMBLY INSTRUCTIONS Step 1: Align and attach the left and right side frames (A and B) to the back frame (C) Caution: Assemble your stand on a carpeted floor or the empty - Insignia NS-3IN1MT50C | User Manual (English) - Page 8
3-in-1 TV STAND Step 2: Align and attach the upper and middle crossbars (E and G) and the bottom brace (I) to the side frames (A and B) 1 Insert two 1 5/8" bolts (V) through the lock washers (X) and flat washers (Y) through the drilled holes on the top rail of the side frames (A and B) and securely - Insignia NS-3IN1MT50C | User Manual (English) - Page 9
3-in-1 TV STAND Step 3: Align and attach the front stringers (F, H, and J) to the front of the side frames (A and B) 1 Insert two 1 5/8" bolts (V) through the lock washers (X) and flat washers (Y) through the drilled holes on the top rail of the side frames (A and B) and securely screw into the - Insignia NS-3IN1MT50C | User Manual (English) - Page 10
the assembled frame upright. Adjust the levelers on the side frames (A and B) to level the assembly. NOTE: For swivel stand assembly, see "SWIVEL STAND ASSEMBLY INSTRUCTIONS" on page 22. For Wall Mount or Table Top assembly, continue to the next step. 10 www.insigniaproducts.com - Insignia NS-3IN1MT50C | User Manual (English) - Page 11
3-in-1 TV STAND Step 5: Attach the cable clips • Attach two of the cable clips (R) to the back of the side frames (A and B) with two 3/4" bolts (T) per cable clip. You'll need: R (2) T (4) EE (1) www.insigniaproducts.com 11 - Insignia NS-3IN1MT50C | User Manual (English) - Page 12
3-in-1 TV STAND Step 6: Attach the shelves 1 Insert the suction cups (S) into the top holes and the metal tabs of the crossbars and stringers, the bottom stringer (J) (4 cups). Upper crossbars and stringers (E, F, G and H) and bottom brace (I) (3 cups each). TIP: If a suction cup resists insertion, - Insignia NS-3IN1MT50C | User Manual (English) - Page 13
TV stand and install the tipping restraint hardware kit 1 Position the assembled stand against a wall where you plan to use it. 2 Follow the instructions printed on the bag containing the tipping restraint hardware kit (GG) to attach the restraint hardware to the wall and the stand. Anchor Anchor - Insignia NS-3IN1MT50C | User Manual (English) - Page 14
3-in-1 TV STAND WALL MOUNT ASSEMBLYINSTRUCTIONS Step 1: Select the correct bolts, washers, and spacers for your TV. M4 hardware assembly: • M4 x 12 mm bolts (HH) top screw holes • M4 x 30 mm bolts (II) bottom screw holes • M4 lock washers (QQ) • M4/M5 Flat washers (WW) • Small spacers (VV) M5 - Insignia NS-3IN1MT50C | User Manual (English) - Page 15
screen from damages and scratches. 2 If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for instructions. 3 Temporarily lay the TV brackets (Q) on the back of your TV. 4 Align the screw holes in the TV brackets with the mounting screw holes on - Insignia NS-3IN1MT50C | User Manual (English) - Page 16
3-in-1 TV STAND Step 3: Option 1 - Mounting bracket instructions for a TV with a flat back To mount the TV brackets: 1 Align the TV brackets (Q) with the mounting screw holes on the back of the TV. - Insignia NS-3IN1MT50C | User Manual (English) - Page 17
3-in-1 TV STAND Step 3: Option 2 - Mounting bracket instructions for a TV with an irregularly shaped or obstructed back 1 Align the TV brackets (Q) with the mounting screw holes on the back of the TV. Make - Insignia NS-3IN1MT50C | User Manual (English) - Page 18
3-in-1 TV STAND Step 4: Option 1 - Mount the frame to a stud wall NOTE: See Step 4: Option 2 for instructions on mounting the frame to a concrete wall. 1 Use a stud sensor to locate two adjacent wall studs, then position the mounting frame (P) exactly between the two - Insignia NS-3IN1MT50C | User Manual (English) - Page 19
3-in-1 TV STAND Step 4: Option 2 - Mount the frame to a block or concrete wall 1 Place the mounting frame (P) against the wall where you intend to mount the TV. Use a level to make sure the mounting frame (P) is level, then mark the four mounting holes on the wall. Never locate the mounting holes - Insignia NS-3IN1MT50C | User Manual (English) - Page 20
3-in-1 TV STAND Step 5: Attaching the TV to the mounting frame on the wall 1 Lift the TV up to the mounting frame (P). 2 Set the hooks on TV brackets (Q) over the mounting frame, then lower the hooks onto the bars on mounting frame. 3 Center the TV, then secure it in place using a screwdriver to - Insignia NS-3IN1MT50C | User Manual (English) - Page 21
TV stand and install the tipping restraint hardware kit 1 Position the assembled stand against a wall where you plan to use it. 2 Follow the instructions printed on the bag containing the tipping restraint hardware kit (GG) to attach the restraint hardware to the wall and the stand. Anchor Anchor - Insignia NS-3IN1MT50C | User Manual (English) - Page 22
3-in-1 TV STAND SWIVEL STAND ASSEMBLY INSTRUCTIONS Step 1: Align and attach the long rear support 1 Insert four 2¼" bolts (W) through the lock washers (X) and the flat washers (Y) through the drilled holes on the long rear support (D). 2 Securely screw into the threaded holes of the side frames (A - Insignia NS-3IN1MT50C | User Manual (English) - Page 23
Insert a 2¼" bolt (W) through a lock washer (X) and a flat washer (Y) and then through the swiveling bracket (N) and the drilled hole on the long rear support (D). 3 Place a second flat washer (Y), and a lock washer (X) onto the end of the threaded bolt, then secure with a hex nut (Z). 4 Repeat this - Insignia NS-3IN1MT50C | User Manual (English) - Page 24
3-in-1 TV STAND Step 3: Attach the mounting frame to the swivel bracket 1 Hold the flat side of the mounting frame (P) against the swivel bracket (N), aligning the holes. Make sure that the two recessed holes on mounting frame (P) are at the bottom. 2 Insert a 3/4" bolt (T) through a flat washer (Y) - Insignia NS-3IN1MT50C | User Manual (English) - Page 25
3-in-1 TV STAND Step 4: Attach the cable clips • Attach the cable clips (R) to the back of the long rear support (D) in two of four locations with two 3/4" bolts (T) per cable clip. You'll need: R (2) T (4) EE (1) www.insigniaproducts.com 25 - Insignia NS-3IN1MT50C | User Manual (English) - Page 26
3-in-1 TV STAND Step 5: Attaching the TV to the mounting frame on the swivel bracket 1 Attach the TV brackets (Q) to the back of the television following the steps on pages 15, 16, and 17, depending on the type of TV that you own. 2 Lift the TV up to the mounting frame (P). 3 Set the hooks on TV - Insignia NS-3IN1MT50C | User Manual (English) - Page 27
3-in-1 TV STAND Step 6: Attach the shelves 1 Insert the suction cups (S) into the top holes and the metal tabs of the crossbars and stringers, the bottom stringer (J) (4 cups). Upper crossbars and stringers (E, F, G and H) and bottom brace (I) (3 cups each). TIP: If a suction cup resists insertion, - Insignia NS-3IN1MT50C | User Manual (English) - Page 28
TV stand and install the tipping restraint hardware kit 1 Position the assembled stand against a wall where you plan to use it. 2 Follow the instructions printed on the bag containing the tipping restraint hardware kit (GG) to attach the restraint hardware to the wall and the stand. Anchor Anchor - Insignia NS-3IN1MT50C | User Manual (English) - Page 29
the following chart. Look out for: What can happen: How to avoid the problem: • Children climbing on the stand. • Risk of injury or death. • in the instructions. • Work from the bottom to the top when loading shelves. • The bottom shelves can only support 50 lbs. while the top can support 135 - Insignia NS-3IN1MT50C | User Manual (English) - Page 30
become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, does the warranty not cover? This warranty does not cover: • Customer instruction/education • Installation • Set up adjustments • Cosmetic damage • Damage due - Insignia NS-3IN1MT50C | User Manual (English) - Page 31
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2014 Best Buy. All rights
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
 |
 |
SAFETY INFORMATION AND SPECIFICATIONS .2
PACKAGE CONTENTS: PARTS
..................................
4
PACKAGE CONTENTS: HARDWARE
.......................
5
ASSEMBLY INSTRUCTIONS
......................................
7
CARE AND MAINTENANCE
...................................
29
Wood Finish and Glass
3-in-1 TV Stand
for TVs up to 52”/135 lbs.
NS-3IN1MT50C/NS-3IN1MT50C-C
Before using your new product, please read these instructions to prevent any damage.
USER GUIDE