Insignia NS-BRHTIB Firmware Installation Guide (English)

Firmware update: Download/Install instructions for Blu

‐

ray DVD players

released after August 2009

System requirements: a computer with an open USB port, USB flash drive (stick), broadband internet

access and operating software of Windows XP, Windows Vista or Mac OS 10.3 or newer. This option is

not recommended with dial

‐

up or DSL service with a bit rate lower than 256kbps. If the instructions

provided below do not help, call Insignia Customer Support at (877) 467

‐

7289 for assistance.

First: Download the update file

1.

Insert USB flash drive into the open USB port on your computer.

2.

Download firmware; if a pop

‐

up window opens telling you to open, save or cancel, click

Save

and save the file to your USB flash drive.

Note: File size is approximately 47 MB. Estimated download time is 4

‐

5 minutes (with a 1.5

Mbps broadband connection).

3. After saving the firmware to your USB flash drive; remove the USB flash drive from your

computer.

Second: Upgrading the Player Software with a USB Flash Drive (Stick)

1.

Eject any disks that may be in the player, and remove any USB flash drive already inserted in the

player.

2.

Turn the player off; insert the USB flash drive containing the firmware that was downloaded into

the player’s USB port.

3.

Turn the player on

4.

After one or two minutes, a screen similar to the one below will appear: