Intel BLKD425KT Product Specification

Intel BLKD425KT Manual

Intel BLKD425KT manual content summary:

  • Intel BLKD425KT | Product Specification - Page 1
    Board D425KT and Intel® Desktop Board D425KTW may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board D425KT and Intel Desktop Board D425KTW Specification Update
  • Intel BLKD425KT | Product Specification - Page 2
    applies to only the standard Intel® Desktop Board D425KT and Intel® Desktop Board D425KTW with BIOS identifier MWPNT10N.86A Changes to this specification will be published in the Intel Desktop Board D425KT and Intel Desktop Board D425KTW Specification Update before being incorporated into a revision
  • Intel BLKD425KT | Product Specification - Page 3
    Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for the Intel® Desktop Board D425KT and Intel® Desktop Board D425KTW. It describes the standard product and available manufacturing options.
  • Intel BLKD425KT | Product Specification - Page 4
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification Other Common Notation # GB GB/s Gbit KB Kbit kbits/s MB MB/s Mbit Mbit/s xxh x.x V * Used after a signal name to identify an active-low signal (such
  • Intel BLKD425KT | Product Specification - Page 5
    Graphics Subsystem 15 1.4 System Memory 16 1.5 Intel® NM10 Express Chipset 17 1.5.2 USB 19 1.5.3 SATA Support 19 1.6 Real-Time Clock Subsystem 20 1.7 Legacy I/O Controller 20 1.8 LAN Subsystem 21 1.8.1 LAN Subsystem Drivers 21 1.8.2 RJ-45 LAN Connector with Integrated LEDs 22 1.9 Audio
  • Intel BLKD425KT | Product Specification - Page 6
    Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 2.7 Power Consumption 57 2.7.1 Minimum Load Configuration 57 2.7.2 Maximum Load Configuration 57 2.8 Reliability 58 2.9 Environmental 59 3 Overview of BIOS Features 61 3.1 Introduction 61 3.2 BIOS Flash Memory
  • Intel BLKD425KT | Product Specification - Page 7
    Diagram for Front Panel USB Header with Intel Z-U130 USB Solid-State Drive or Compatible Device Support (D425KTW only 48 14. Location of the BIOS Configuration Jumper Block 49 15. Board Dimensions 51 16. Localized High Temperature Zones 53 17. Fan Location Guide for Chassis Selection (Chassis
  • Intel BLKD425KT | Product Specification - Page 8
    Current and Power Results 58 31. Intel Desktop Board D425KT and Intel Desktop Board D425KTW Environmental Specifications 59 32. BIOS Setup Program Menu Bar 62 33. BIOS Setup Program Function Keys 62 34. Acceptable Drives/Media Types for BIOS Recovery 65 35. Boot Device Menu Options
  • Intel BLKD425KT | Product Specification - Page 9
    D425KT and Intel Desktop Board D425KTW. Table 1. Feature Summary Form Factor Processor Memory Chipset Mini-ITX, (6.7 inches by 6.7 inches [170 millimeters by 170 millimeters]) compatible with microATX Passively-cooled, soldered-down Single-Core Intel® Atom™ processor with integrated graphics
  • Intel BLKD425KT | Product Specification - Page 10
    Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification Table 1. Feature Summary (continued) BIOS • Intel® BIOS (resident in the SPI Flash device) • Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, and SMBIOS Instantly Available • Support
  • Intel BLKD425KT | Product Specification - Page 11
    1.1.2 Board Layout Figure 1 shows the location of the major components. Product Description Figure 1. Major Board Components Table 2 lists the components identified in Figure 1. 11
  • Intel BLKD425KT | Product Specification - Page 12
    power LED R BIOS setup configuration jumper block S PCI Express x1 Mini Card connector (D425KTW only) T Intel NM10 Express Chipset U Front Panel Wireless Activity LED Header (D425KTW only) V Front panel USB header (black) D425KTW only - Front panel USB header supports Intel Z-U130 USB
  • Intel BLKD425KT | Product Specification - Page 13
    1.1.3 Block Diagram Figure 2 is a block diagram of the major functional areas. Product Description Figure 2. Block Diagram 13
  • Intel BLKD425KT | Product Specification - Page 14
    D425KTW Desktop Board Support Available configurations for the Intel Desktop Board D425KT and Intel Desktop Board D425KTW Supported processors Chipset information BIOS and driver updates Tested memory Integration information Visit this World Wide Web site: http://www.intel.com/products/motherboard
  • Intel BLKD425KT | Product Specification - Page 15
    up to 2048 x 1536 at 75 Hz refresh (QXGA) ⎯ Supports LVDS displays up to 1366 x 768 (single channel, 18 bpp) (D425KTW only) ⎯ Dual independent display support with LVDS option (D425KTW only) For information about Obtaining graphics software and utilities Refer to Section 1.2, page 14 15
  • Intel BLKD425KT | Product Specification - Page 16
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 1.4 System Memory The board has two 204-pin DDR3 SO-DIMM sockets and supports the following memory features: • DDR3 SDRAM SO-DIMMs with gold-plated contacts • Unbuffered, single-sided or double-sided SO-DIMMs
  • Intel BLKD425KT | Product Specification - Page 17
    Product Description 1.5 Intel® NM10 Express Chipset The Intel NM10 Express Chipset provides interfaces to the processor and the USB, SATA, LPC, LAN, PCI, and PCI Express interfaces. The Intel NM10 Express Chipset is a centralized controller for the board's I/O paths. NOTE The board is designed to
  • Intel BLKD425KT | Product Specification - Page 18
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 1.5.1.4 Configuration Modes For monitors attached to the VGA port, video modes supported by this board are based on the Extended Display Identification Data (EDID) protocol. Video mode configuration for LVDS
  • Intel BLKD425KT | Product Specification - Page 19
    USB 2.0 ports, supports UHCI and EHCI, and uses UHCI- and EHCI-compatible drivers. The port arrangement is as follows: • Eight USB 2.0 ports (D425KT only): ⎯ Four back panel ports ⎯ Four ports are implemented with two dual port internal headers for front panel cabling • Seven USB 2.0 ports (D425KTW
  • Intel BLKD425KT | Product Specification - Page 20
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 1.6 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years.
  • Intel BLKD425KT | Product Specification - Page 21
    subsystem include: • CSMA/CD protocol engine • LAN connect interface that supports the Ethernet controller • PCI Conventional bus power management ⎯ Supports ACPI technology ⎯ Supports LAN wake capabilities 1.8.1 LAN Subsystem Drivers LAN drivers are available from Intel's World Wide Web site. For
  • Intel BLKD425KT | Product Specification - Page 22
    Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 1.8.2 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 3). Figure 3. LAN Connector LED Locations Table 4 describes the LED states when the board is powered
  • Intel BLKD425KT | Product Specification - Page 23
    1.9 Audio Subsystem The board supports the Intel® High Definition Audio (Intel® HD Audio) subsystem. The audio subsystem consists of the following: • Intel NM10 Express Chipset • Realtek ALC662 audio codec The audio subsystem has the following features: • Advanced jack sense for the back panel audio
  • Intel BLKD425KT | Product Specification - Page 24
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 1.9.1 Audio Subsystem Software Audio software and drivers are available from Intel's World Wide Web site. For information about Obtaining audio software and drivers Refer to Section 1.2, page 14 1.9.2
  • Intel BLKD425KT | Product Specification - Page 25
    (WfM) specification. The board has several hardware management features, including the following: • Thermal and voltage monitoring • Chassis intrusion detection 1.10.1 Hardware Monitoring The hardware monitoring and fan control subsystem is based on the Winbond W83627DHG-A device, which supports the
  • Intel BLKD425KT | Product Specification - Page 26
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 1.10.2 Thermal Monitoring Figure 5 shows the locations of the thermal sensors and fan header. Item A B C Description Chassis fan header Remote thermal sensor Thermal diode, located
  • Intel BLKD425KT | Product Specification - Page 27
    an operating system that provides full ACPI support. ACPI features include: • Plug and Play (including bus and device enumeration) • Power management control of individual devices, add-in boards (some add-in boards may require an ACPI-aware driver), video displays, and hard disk drives • Methods
  • Intel BLKD425KT | Product Specification - Page 28
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 1.11.1.1 System States and Power States Under ACPI, the operating system directs all system and device power state transitions. The operating system puts devices in and out of low-power states based on user
  • Intel BLKD425KT | Product Specification - Page 29
    and Events Table 8 lists the devices or specific events that can wake the computer from specific states. Table 8. Wake-up Devices and Events These devices/events can wake up the computer... LAN PME# signal Wake# signal Power switch RTC alarm Serial port USB PS/2 devices ...from this state S1, S3
  • Intel BLKD425KT | Product Specification - Page 30
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 1.11.2 Hardware Support The board provides several power management hardware features, including: • Power connector • Fan header • LAN wake capabilities • Instantly Available PC technology • Wake from USB •
  • Intel BLKD425KT | Product Specification - Page 31
    Specification. Add-in boards that also support this specification can participate in power management and can be used to wake the computer. The use of Instantly Available PC technology requires operating system support and PCI 2.3 compliant add-in cards and drivers. 1.11.2.4 Wake from USB USB
  • Intel BLKD425KT | Product Specification - Page 32
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 1.11.2.9 +5 V Standby Power Indicator LED The +5 V standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 6 shows the location of the standby power
  • Intel BLKD425KT | Product Specification - Page 33
    other system critical functions. These functions include the following: • BIOS/ SPI Flash (4 MB) • Local APIC (19 MB) • Direct Media Interface (40 MB) • Front side bus interrupts (17 MB) • Internal graphics address registers • Memory-mapped I/O that is dynamically allocated for PCI Conventional add
  • Intel BLKD425KT | Product Specification - Page 34
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification The amount of installed memory that can be used will vary based on add-in cards and BIOS settings. Figure 7 shows a schematic of the system memory map. All installed system memory can be used when there is no
  • Intel BLKD425KT | Product Specification - Page 35
    160 KB 1 KB 127 KB 512 KB Description Extended memory Runtime BIOS Reserved Potential available high DOS memory (open to the PCI bus). Dependent on video adapter used. Video memory and BIOS Extended BIOS data (movable by memory manager software) Extended conventional memory Conventional memory 35
  • Intel BLKD425KT | Product Specification - Page 36
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 2.2 Connectors and Headers CAUTION Only the following connectors/headers have overcurrent protection: Back panel and front panel USB, VGA, serial, and PS/2. The other internal connectors/headers are not
  • Intel BLKD425KT | Product Specification - Page 37
    /mouse PS/2 keyboard/mouse Serial port Parallel port VGA port USB ports LAN USB ports Line in Line out Mic in Figure 8. Back Panel Connectors NOTE The back panel audio line out connector is designed to power headphones or amplified speakers only. Poor audio quality occurs if passive (non-amplified
  • Intel BLKD425KT | Product Specification - Page 38
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 2.2.1.2 I/O Shield The I/O shield provided with the board allows access to all back panel connectors and is compatible with standard mini-ITX and microATX chassis. As an added benefit for system configurations
  • Intel BLKD425KT | Product Specification - Page 39
    Technical Reference 2.2.2 Component-side Connectors and Headers Figure 10 shows the locations of the component-side connectors and headers. Figure 10. Component-side Connectors and Headers 39
  • Intel BLKD425KT | Product Specification - Page 40
    x1 Mini Card connector N Front Panel Wireless Activity LED Header (D425KTW only) O Front panel USB header (black) D425KTW only - Front panel USB header supports Intel Z-U130 USB Solid-State Drive or compatible device (brown) P PCI conventional bus connector Q Front panel audio header
  • Intel BLKD425KT | Product Specification - Page 41
    CTS (Clear To Send) Key (no pin) Table 12. LVDS Data Connector - 30-Pin (D425KTW only) Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 negative LVDS Channel A diff data output - positive Ground Ground Selectable LCD power output Selectable LCD power output EDID/DDC clock signal Pin 2 4 6 8 10 12 14
  • Intel BLKD425KT | Product Specification - Page 42
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification Table 13. LVDS Panel Voltage Selection Jumper (D425KTW Power Connector (D425KTW only) Pin Signal Name Description 1 GND Ground 2 GND Ground 3 5 V/12 V Inverter power 4 5 V/12 V Inverter power
  • Intel BLKD425KT | Product Specification - Page 43
    3 TXN 4 Ground 5 RXN 6 RXP 7 Ground Table 18. Front Panel Wireless Activity LED Header (D425KTW only) Pin Signal Name 1 LED (+) 2 Ground Table 19. Front Panel Audio Header for Intel HD Audio Pin Signal Name Pin Signal Name 1 [Port 1] Left channel 2 Ground 3 [Port 1] Right
  • Intel BLKD425KT | Product Specification - Page 44
    Board D425KT and Intel Desktop Board D425KTW Technical Product Specification Table 21. Front Panel USB Header Pin Signal Name Pin 1 +5 VDC 2 3 D- 4 5 D+ 6 7 Ground 8 9 KEY (no pin) 10 Signal Name +5 VDC DD+ Ground No Connect Table 22. Front Panel USB Header with Intel Z-U130 USB
  • Intel BLKD425KT | Product Specification - Page 45
    board has the following add-in card connectors: • PCI Express x1 Mini Card (rev 1.2 compliant) connector (D425KTW only) • PCI Conventional (rev 2.3 compliant) bus connector (with riser card support bus add-in boards with SMBus support to access sensor data on the board. The specific SMBus signals are
  • Intel BLKD425KT | Product Specification - Page 46
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 2.2.2.4 Front Panel Header Switch 5 Ground Ground 7 FP_RESET# In Reset switch Power 9 +5 V Power Pin Signal In/ Out Description Power LED 2 HDR_BLNK_GRN Out Front panel green LED 4
  • Intel BLKD425KT | Product Specification - Page 47
    that is normally open. When the switch is closed, the board resets and runs the POST. 2.2.2.4.3 Power/Sleep LED Header Pins 2 and 4 can be connected to through BIOS setup. Systems built with a dual-color front panel power LED can also use alternate color state options. 2.2.2.4.4 Power Switch
  • Intel BLKD425KT | Product Specification - Page 48
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 2.2.2.5 Front Panel USB Headers Figure 12 and Figure 13 are connection diagrams for the front panel USB headers. NOTE • The +5 VDC power on the USB headers is fused. • Use only a front panel USB connector that
  • Intel BLKD425KT | Product Specification - Page 49
    not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 14 shows the location of the jumper block. The jumper determines the BIOS Setup program's mode. Table 26 lists
  • Intel BLKD425KT | Product Specification - Page 50
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification Table 26. BIOS Configuration Jumper Settings Function/Mode Jumper Setting Configuration Normal 1-2 The BIOS uses current configuration information and passwords for booting. Configure 2-3 Recovery
  • Intel BLKD425KT | Product Specification - Page 51
    Technical Reference 2.4 Mechanical Considerations 2.4.1 Form Factor The board is designed to fit into a mini-ITX or microATX form-factor chassis. Figure 15 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 6.7 inches by 6.7
  • Intel BLKD425KT | Product Specification - Page 52
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 2.5 Electrical Considerations 2.5.1 Fan Header Current Capability Table 27 lists the current capability of the fan header. Table 27. Fan Header Current Capability Fan Header Maximum
  • Intel BLKD425KT | Product Specification - Page 53
    high temperature zones. Item A B C Description Processor voltage regulator area Intel Atom processor Intel NM10 Express Chipset Figure 16. Localized High Temperature Zones Table 28 provides maximum case temperatures for the board components that are sensitive to thermal changes. The operating
  • Intel BLKD425KT | Product Specification - Page 54
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification Table 28. Thermal Considerations for Components Component Intel Atom processor Processor voltage regulator area Intel NM10 Express Chipset Memory Thermal Design Power: a power dissipation target based
  • Intel BLKD425KT | Product Specification - Page 55
    Technical Reference 2.6.1.2 Thermal Specifications Guideline Terms TA TJ ΨJA TIM TDP TA board will be able to dissipate up to 13 W of processor power in most of the passively enabled system chassis. This board is targeted for 3-7 liters volumetric or larger, desktop/tower orientation, mini-ITX
  • Intel BLKD425KT | Product Specification - Page 56
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification Figure 17. Fan Location Guide for Chassis Selection (Chassis Orientation is Not Restricted) For all chassis configurations, the heatsink performance parameter, ΨJA should be less than 3.85 °C/W. The detail
  • Intel BLKD425KT | Product Specification - Page 57
    : • 2 GB DDR3/800 MHz SO-DIMM • USB keyboard and mouse • LAN linked at 100 Mb/s • DOS booted via network (PXE); system at idle • All on board peripherals enabled (serial, parallel, audio, ...) Table 29. Minimum Load Configuration Current and Power Results Output Voltage 3.3 V 5 V 12 V1 12
  • Intel BLKD425KT | Product Specification - Page 58
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification • Riser card on conventional PCI slot, populated with PCI LAN card, running file transfer through local network to SATA hard drive • USB keyboard and mouse • Back and front panel host-powered USB devices (
  • Intel BLKD425KT | Product Specification - Page 59
    Technical Reference 2.9 Environmental Table 31 lists the environmental specifications for the board. Table 31. Intel Desktop Board D425KT and Intel Desktop Board D425KTW Environmental Specifications Parameter Temperature Non-Operating Operating Shock Unpackaged Packaged Vibration Unpackaged
  • Intel BLKD425KT | Product Specification - Page 60
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 60
  • Intel BLKD425KT | Product Specification - Page 61
    The board uses an Intel BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The BIOS
  • Intel BLKD425KT | Product Specification - Page 62
    Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification Table 32 lists the BIOS Setup program menu features. Table 32. BIOS Setup Program Menu Bar Maintenance Main Advanced Security Clears passwords and displays processor information Displays processor and memory
  • Intel BLKD425KT | Product Specification - Page 63
    SMBIOS table interface for such operating systems. Using this support, an SMBIOS service-level application running on a non-Plug and Play operating system can obtain the SMBIOS information. Additional board information can be found in the BIOS under the Additional Information header under the Main
  • Intel BLKD425KT | Product Specification - Page 64
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 3.5 Legacy USB Support Legacy USB support enables USB devices to be used even when the operating system's USB drivers are not yet available. Legacy USB support is used to access the BIOS Setup program, and to
  • Intel BLKD425KT | Product Specification - Page 65
    connected to the SATA interface Yes USB removable drive (a USB Flash Drive, for example) Yes USB diskette drive (with a 1.44 MB diskette) No USB hard disk drive No For information about BIOS update instructions Refer to http://www.intel.com/support/motherboards/desktop/sb/ CS-022312.htm 65
  • Intel BLKD425KT | Product Specification - Page 66
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 3.6.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel® Integrator's Toolkit that is available from
  • Intel BLKD425KT | Product Specification - Page 67
    Overview of BIOS Features 3.7.3 Booting Without Attached Devices For use in embedded applications, the BIOS has been designed so that after passing the POST, the operating system loader is invoked even if the following devices are not present: • Video adapter •
  • Intel BLKD425KT | Product Specification - Page 68
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 3.8 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A supervisor password and a user password can be set for the BIOS
  • Intel BLKD425KT | Product Specification - Page 69
    codes can be heard through a speaker attached to the board's line out audio jack (see Figure 4, B on page 24). Table 37. BIOS Beep Codes Type Pattern F2 Setup/F10 Boot Menu One 0.5 second beep when BIOS is ready to Prompt accept keyboard input BIOS update in progress None Video error On-off
  • Intel BLKD425KT | Product Specification - Page 70
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 4.2 Front-panel Power LED Blink Codes Whenever a recoverable error occurs during POST, the BIOS causes the board's front panel power LED to blink an error message describing the problem (see Table 38).
  • Intel BLKD425KT | Product Specification - Page 71
    Board Status and Error Messages 4.4 Port 80h POST Codes During the POST, the BIOS driver for debug. Host Processors: 1F is an unrecoverable CPU error. 20 - 2F Memory/Chipset: 2F is no memory detected or no useful memory console codes). B0 - BF Boot Devices: Includes fixed media and removable media.
  • Intel BLKD425KT | Product Specification - Page 72
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification Table 41. Port 80h POST Codes POST Code Description of POST Operation Host Processor 10 Power-on initialization of the host processor (Boot Strap Processor) 11 Host processor cache initialization (
  • Intel BLKD425KT | Product Specification - Page 73
    95 Instructing keyboard controller to run Self Test (PS/2 only) Mouse (PS/2 or USB) a removable media BDS Dy Trying boot selection y (y=0 to 15) PEI memory found E1, E3 Reserved for PEI/PEIMs DXE Core E4 Entered DXE phase E5 Started dispatching drivers E6 Started connecting drivers
  • Intel BLKD425KT | Product Specification - Page 74
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification Table 41. Port 80h POST Codes (continued) POST Code Description of POST Operation DXE Drivers E7 Waiting for user input E8 Checking password E9 Entering BIOS setup EB Calling Legacy Option ROMs
  • Intel BLKD425KT | Product Specification - Page 75
    Board Status and Error Messages Table 42. Typical Port 80h POST Sequence POST Code Description 21 Initializing a chipset component 22 Reading SPD from memory DIMMs 23 Detecting presence of memory DIMMs 25 Configuring memory 28 Testing memory Calling Video BIOS 58 Resetting USB bus 5A
  • Intel BLKD425KT | Product Specification - Page 76
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 76
  • Intel BLKD425KT | Product Specification - Page 77
    statement • Product Ecology statements • Electromagnetic Compatibility (EMC) standards • Product certification markings 5.1.1 Safety Standards Intel Desktop Board D425KT and Intel Desktop Board D425KTW comply with the safety standards stated in Table 43 when correctly installed in a compatible host
  • Intel BLKD425KT | Product Specification - Page 78
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the products Intel® Desktop Board D425KT and Intel® Desktop Board D425KTW are in
  • Intel BLKD425KT | Product Specification - Page 79
    of this program, including the scope of covered products, available locations, shipping instructions, terms and conditions, etc Intel Product Recycling Program http://www.intel.com/intel/other/ehs/product_ecology Deutsch Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das
  • Intel BLKD425KT | Product Specification - Page 80
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification Español Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel
  • Intel BLKD425KT | Product Specification - Page 81
    ıtlar ve şartlar v.s dahil bütün ayrıntılarını ögrenmek için lütfen http://www.intel.com/intel/other/ehs/product_ecology Web sayfasına gidin. 5.1.4 EMC Regulations Intel Desktop Board D425KT and Intel Desktop Board D425KTW comply with the EMC regulations stated in Table 44 when correctly installed
  • Intel BLKD425KT | Product Specification - Page 82
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification FCC Declaration of Conformity This device complies energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
  • Intel BLKD425KT | Product Specification - Page 83
    or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. Korea Class B Statement Korea Class B Statement translation: This equipment is for home use, and has acquired electromagnetic conformity registration
  • Intel BLKD425KT | Product Specification - Page 84
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 5.1.5 ENERGY STAR* 5.0, e-Standby, and ErP Compliance Intel Desktop Board D425KT and Intel Desktop Board D425KTW meet the ENERGY STAR requirements listed in Table 45 when used in corresponding system
  • Intel BLKD425KT | Product Specification - Page 85
    5.1.6 Regulatory Compliance Marks (Board Level) Intel Desktop Board D425KT and Intel Desktop Board D425KTW have the regulatory compliance marks CPU-D425KT (B). Taiwan BSMI (Bureau of Standards, Metrology and Inspections) mark. Includes adjacent Intel company number, D33025. Printed wiring board
  • Intel BLKD425KT | Product Specification - Page 86
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used
  • Intel BLKD425KT | Product Specification - Page 87
    Regulatory Compliance and Battery Disposal Information PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las
  • Intel BLKD425KT | Product Specification - Page 88
    Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam
  • Intel BLKD425KT | Product Specification - Page 89
    Regulatory Compliance and Battery Disposal Information 89
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89

Intel® Desktop Board D425KT and
Intel® Desktop Board D425KTW
Technical Product Specification
July 2010
Order Number:
E98415-001US
The Intel
®
Desktop Board D425KT and Intel
®
Desktop Board D425KTW may contain design defects or errors known as errata that may cause the product to
deviate from published specifications.
Current characterized errata are documented in the Intel Desktop Board D425KT and Intel Desktop Board D425KTW
Specification Update.