Intel BLKDG41MJ Product Specification

Intel BLKDG41MJ Manual

Get Intel BLKDG41MJ PDF manuals and user guides View all Intel BLKDG41MJ manuals
Add to My Manuals
Save this manual to your list of manuals

Intel BLKDG41MJ manual content summary:

  • Intel BLKDG41MJ | Product Specification - Page 1
    March 2009 Order Number: E62863-001US The Intel® Desktop Board DG41MJ may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board DG41MJ Specification Update.
  • Intel BLKDG41MJ | Product Specification - Page 2
    Intel® Desktop Board DG41MJ with BIOS identifier MJG4110H.86A. Changes to this specification will be published in the Intel Desktop Board DG41MJ instructions marked "reserved" or "undefined." Intel . Intel, the Intel logo, Pentium, Core, and Celeron are registered trademarks of Intel Corporation or
  • Intel BLKDG41MJ | Product Specification - Page 3
    intended to provide detailed, technical information about the Intel Desktop Board DG41MJ and its components to the vendors, system integrators used on the board A map of the resources of the board The features supported by the BIOS Setup program A description of the BIOS error messages, beep codes
  • Intel BLKDG41MJ | Product Specification - Page 4
    Intel Desktop Board DG41MJ Technical Product Specification Other Common Notation # GB GB/sec Gbit KB Kbit kbits/sec MB MB/sec Mbit Mbit/sec xxh x.x V * Used after a signal name to identify an active-low signal (such as USBP0#) Gigabyte (1,073,741,824 bytes) Gigabytes per
  • Intel BLKDG41MJ | Product Specification - Page 5
    1.1.2 Board Layout 11 1.1.3 Block Diagram 13 1.2 Legacy Considerations 14 1.3 Online Support 14 1.4 Processor 14 1.5 System Memory 15 1.5.1 Memory Configurations 16 1.6 Intel® G41 Express Chipset 18 1.6.1 Intel G41 Graphics Subsystem 18 1.6.2 USB 20 1.6.3 Serial ATA Interfaces 20 1.7 Real
  • Intel BLKDG41MJ | Product Specification - Page 6
    Intel Desktop Board DG41MJ Technical Product Specification 2.4 Mechanical Considerations 50 2.4.1 Form Factor 50 2.5 Electrical 58 3.4 System Management BIOS (SMBIOS 59 3.5 Legacy USB Support 59 3.6 BIOS Updates 60 3.6.1 Language Support 60 3.6.2 Custom Splash Screen 61 3.7 BIOS Recovery 61
  • Intel BLKDG41MJ | Product Specification - Page 7
    Board Components Shown in Figure 1 12 3. Supported Memory Configurations 15 4. Audio Jack Support 22 5. LAN Connector LED States 25 6. Header for Intel® HD Audio 43 17. Front Panel Audio Header for AC '97 Audio 43 18. Auxiliary Front Panel Power/Sleep LED Header 43 19. Processor Core Power
  • Intel BLKDG41MJ | Product Specification - Page 8
    Technical Product Specification 29. Intel Desktop Board DG41MJ Environmental Specifications 55 30. BIOS Setup Program Menu Bar 58 31. BIOS Setup Program Function Keys 58 32. Acceptable Drives/Media Types for BIOS Recovery
  • Intel BLKDG41MJ | Product Specification - Page 9
    Video Support for the following: • Intel® Celeron® processor 400 Sequence in an LGA775 socket • Intel® Xeon® processor 3000 Sequence in an LGA775 socket • Intel® Core™2 Duo processor in an LGA775 socket • Intel® Pentium® Dual-Core processor in an LGA775 socket • Intel® Celeron® Dual-Core processor
  • Intel BLKDG41MJ | Product Specification - Page 10
    Intel Desktop Board DG41MJ Technical Product Specification Table 1. Feature Summary (continued) Expansion Capabilities Hardware Monitor Subsystem • One PCI Conventional bus connector • Voltage sense to detect out of range power
  • Intel BLKDG41MJ | Product Specification - Page 11
    1.1.2 Board Layout Figure 1 shows the location of the major components. Product Description Figure 1. Major Board Components Table 2 lists the components identified in Figure 1. 11
  • Intel BLKDG41MJ | Product Specification - Page 12
    Intel Desktop Board DG41MJ Technical Product Specification Table 2. Board Components Shown in Figure 1 Item/callout from Figure 1 Description A Front panel audio header B Back panel connectors C Processor core power connector (2 X 2) D Front panel USB header E Front panel USB header F
  • Intel BLKDG41MJ | Product Specification - Page 13
    1.1.3 Block Diagram Figure 2 is a block diagram of the major functional areas. Product Description Figure 2. Block Diagram 13
  • Intel BLKDG41MJ | Product Specification - Page 14
    support.intel.com/support/motherboards/desktop/sb/CS025414.htm http://www.intel.com/support/go/buildit 1.4 Processor The board is designed to support the following processors: • Intel® Celeron® processor in an LGA775 socket • Intel® Xeon® processor in an LGA775 socket • Intel® Core™2 Duo processor
  • Intel BLKDG41MJ | Product Specification - Page 15
    usable DIMM (one x8 Double-sided DIMM) DDR2 667 512 Mbit 256 MB 4 GB DDR2 800 512 Mbit 256 MB 4 GB Maximum capacity with two identical x8 Double-sided DIMMs 8 GB 8 GB For information about... Tested Memory Refer to: http://support.intel.com/support/motherboards/desktop/sb/ CS-025414.htm 15
  • Intel BLKDG41MJ | Product Specification - Page 16
    Desktop Board DG41MJ Technical Product Specification 1.5.1 Memory Configurations The Intel 82G41 GMCH supports the following types of memory organization: • Dual channel ( about... Memory Configuration Examples Refer to: http://www.intel.com/support/motherboards/desktop/sb/cs011965.htm 16
  • Intel BLKDG41MJ | Product Specification - Page 17
    Product Description Figure 3 illustrates the memory channel and DIMM configuration. Figure 3. Memory Channel Configuration and DIMM Configuration # INTEGRATOR'S NOTE Regardless of the memory configuration used (dual channel, single channel, or flex mode), DIMM 0 of Channel A must always be populated
  • Intel BLKDG41MJ | Product Specification - Page 18
    Media Interface (DMI) interconnect • Intel 82801GB I/O Controller Hub (ICH7) with DMI interconnect The GMCH component provides interfaces to the processor, memory, PCI, and the DMI interconnect. The component also provides integrated graphics capabilities supporting 3D, 2D, and display capabilities
  • Intel BLKDG41MJ | Product Specification - Page 19
    as the operating system being used. For Microsoft Windows Vista*, a minimum of 128 MB can be allocated to DVMT and a maximum of over 2 GB can be allocated The use of DVMT requires operating system driver support. 1.6.1.3 Configuration Modes The video modes supported by this board are based on the
  • Intel BLKDG41MJ | Product Specification - Page 20
    Intel Desktop Board DG41MJ Technical Product Specification 1.6.2 USB The board supports up to eight USB 2.0 ports, supports UHCI and EHCI, and uses UHCI- and EHCI-compatible drivers to device connections, unlike Parallel ATA IDE which supports a master/slave configuration and two devices per channel
  • Intel BLKDG41MJ | Product Specification - Page 21
    Serial Port Interface The serial port header is located on the component side of the board. The serial port supports data transfers at speeds up to 115.2 kbits/sec with BIOS support. For information about The location of the serial port header The serial port header signal mapping Refer to Figure
  • Intel BLKDG41MJ | Product Specification - Page 22
    Intel Desktop Board DG41MJ Technical Product Specification 1.8.2 PS/2 Keyboard Interface The PS/2 panel audio connectors • Component-side audio headers/connectors: ⎯ Intel® High Definition Audio front panel header The audio subsystem supports the following features: • A signal-to-noise (S/N) ratio
  • Intel BLKDG41MJ | Product Specification - Page 23
    software and drivers are available from Intel's World Wide Web site. For information about Obtaining audio software and drivers Refer is supported for both the front and back panel microphone connectors. The front/back panel audio connectors are configurable through the audio device drivers. The
  • Intel BLKDG41MJ | Product Specification - Page 24
    bus power management ⎯ ACPI technology support ⎯ LAN wake capabilities • LAN subsystem software For information about LAN software and drivers Refer to http://downloadcenter.intel.com 1.10.1 LAN Subsystem Software LAN software and drivers are available from Intel's World Wide Web site. For
  • Intel BLKDG41MJ | Product Specification - Page 25
    Product Description 1.10.2 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 5 below). Item A B Description Link LED (Green) Data Rate LED (Green/Yellow) Figure 5. LAN Connector LED Locations Table 5 describes the LED states when the board
  • Intel BLKDG41MJ | Product Specification - Page 26
    Intel Desktop Board DG41MJ integrated into the Legacy I/O Controller • Four thermal sensors (processor, 82G41 GMCH, 82801GB ICH7, and a remote thermal sensor) 6, page 27 1.11.3 Chassis Intrusion and Detection The board supports a chassis security feature that detects if the chassis cover is removed
  • Intel BLKDG41MJ | Product Specification - Page 27
    Monitoring Figure 6 shows the locations of the thermal sensors and fan headers. Item A B C D E Description Thermal diode, located on the processor die Front chassis fan Processor fan Thermal diode, located on the GMCH die Thermal diode, located on the ICH7 die Figure 6. Thermal Sensors and Fan
  • Intel BLKDG41MJ | Product Specification - Page 28
    Intel Desktop Board DG41MJ Technical Product Specification 1.12 Power Management Power management is implemented at several levels, including: • Software support through Advanced Configuration and Power Interface (ACPI) • Hardware support may require an ACPI-aware driver), video displays, and hard
  • Intel BLKDG41MJ | Product Specification - Page 29
    . Table 7 lists the power states supported by the board along with the associated Full power > 30 W G1 - sleeping state S1 - Processor stopped C1 - stop grant G1 - sleeping state G1 - or external source. No power to the system. Service can be performed safely. Notes: 1. Total system power
  • Intel BLKDG41MJ | Product Specification - Page 30
    Intel Desktop Board DG41MJ Technical Product Specification 1.12.1.2 Wake-up Devices and Events Table 8 lists the devices events from an ACPI state requires an operating system that provides full ACPI support. In addition, software, drivers, and peripherals must fully support ACPI wake events. 30
  • Intel BLKDG41MJ | Product Specification - Page 31
    from the +5 V standby line. NOTE The use of Wake from USB from an ACPI state requires an operating system that provides full ACPI support. 1.12.2.1 Power Connector ATX12V-compliant power supplies can turn off the system power through system control. When an ACPI-enabled system receives the correct
  • Intel BLKDG41MJ | Product Specification - Page 32
    Intel Desktop Board DG41MJ Technical Product Specification 1.12.2.2 Fan Headers The function/operation of the fan headers is as follows: • The fans are on when the board is in the S0 state. • The fans are off when the board is off or in the S3, S4, or S5 state. • The processor board supports LAN
  • Intel BLKDG41MJ | Product Specification - Page 33
    in power management and can be used to wake the computer. The use of Instantly Available PC technology requires operating system support and PCI 2.3 compliant add-in cards and drivers. 1.12.2.5 Wake from USB USB bus activity wakes the computer from an ACPI S1 or S3 state. NOTE Wake from USB
  • Intel BLKDG41MJ | Product Specification - Page 34
    Intel Desktop Board DG41MJ Technical Product Specification 1.12.2.9 +5 V Standby Power Indicator LED The +5 V standby power indicator LED shows that power is still present even when the computer appears to
  • Intel BLKDG41MJ | Product Specification - Page 35
    , internal graphics ranges • Memory-mapped I/O that is dynamically allocated for PCI Conventional add-in cards • Base graphics memory support (1 MB or 8 MB) NOTE System resources and hardware (such as PCI) require physical memory address locations that can reduce available addressable system memory
  • Intel BLKDG41MJ | Product Specification - Page 36
    Intel Desktop Board DG41MJ Technical Product Specification The amount of installed memory that can be used will vary based on add-in cards and BIOS settings. Figure 8 shows a schematic
  • Intel BLKDG41MJ | Product Specification - Page 37
    800 K - 896 K E0000 - EFFFF C8000 - DFFFF 640 K - 800 K 639 K - 640 K 512 K - 639 K 0 K - 512 K A0000 - C7FFF 9FC00 - 9FFFF 80000 - 9FBFF 00000 - 7FFFF Size 8191 MB 64 KB 64 KB 96 KB 160 KB 1 KB 127 KB 512 KB Description Extended memory Runtime BIOS Reserved Potential available high DOS memory
  • Intel BLKDG41MJ | Product Specification - Page 38
    Intel Desktop Board DG41MJ Technical Product Specification 2.2 Connectors and Headers CAUTION Only the following connectors and headers have overcurrent protection: Back panel and front panel USB and PS/2. The
  • Intel BLKDG41MJ | Product Specification - Page 39
    Technical Reference 2.2.1 Back Panel Connectors Figure 9 shows the locations of the back panel connectors. Item A B C D E F G H I J Description PS/2 keyboard port USB ports (2) VGA port Parallel port DVI port LAN USB ports (2) Line in Mic in Line out Figure 9. Back Panel Connectors 39
  • Intel BLKDG41MJ | Product Specification - Page 40
    Intel Desktop Board DG41MJ Technical Product Specification 2.2.2 Component-side Connectors and Headers Figure 10 shows the locations of the component-side connectors and headers. Figure 10. Component-side Connectors and Headers 40
  • Intel BLKDG41MJ | Product Specification - Page 41
    . Table 10. Component-side Connectors and Headers Shown in Figure 10 Item/callout from Figure 1 Description A Front panel audio header B Processor core power connector (2 X 2) C Front panel USB header D Front panel USB header E Auxiliary front panel power LED header F Front chassis fan
  • Intel BLKDG41MJ | Product Specification - Page 42
    Intel Desktop Board DG41MJ Technical Product Specification 2.2.2.1 Signal Tables for the Connectors and Headers Table 11. Chassis Fan Header Pin Signal Name 1 Control 2 +12 V 3 Tach Table 15. Processor Fan Header Pin Signal Name 1 Ground 2 +12 V 3 FAN_TACH 4 FAN_CONTROL 42
  • Intel BLKDG41MJ | Product Specification - Page 43
    Technical Reference Table 16. Front Panel Audio Header for Intel® HD Audio Pin Signal Name Pin Signal Name 1 [Port 1] Left Conventional bus connector. This enables PCI Conventional bus add-in boards with SMBus support to access sensor data on the board. The specific SMBus signals are as
  • Intel BLKDG41MJ | Product Specification - Page 44
    . The board supports the use of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables. When using a power supply with a 2 x 10 main power cable, attach that cable on the rightmost pins of the main power connector, leaving pins 11, 12, 23, and 24 unconnected. • Processor core power
  • Intel BLKDG41MJ | Product Specification - Page 45
    Technical Reference 2.2.2.5 Front Panel Header This section describes the functions of the front panel header. Table 21 lists the signal names of the front panel header. Figure 11 is a connection diagram for the front panel header. Table 21. Front Panel Header In/ Pin Signal Out Description
  • Intel BLKDG41MJ | Product Specification - Page 46
    Intel Desktop Board DG41MJ Technical Product Specification 2.2.2.5.2 Reset Switch Header Pins 5 and 7 can be connected to a momentary single pole, single throw (SPST) type switch that is normally open. When
  • Intel BLKDG41MJ | Product Specification - Page 47
    Technical Reference 2.2.2.7 Front Panel USB Headers Figure 12 is a connection diagram for the front panel USB headers. # INTEGRATOR'S NOTES • The +5 V DC power on the front panel USB headers is fused. • Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed
  • Intel BLKDG41MJ | Product Specification - Page 48
    Intel Desktop Board DG41MJ Technical Product Specification 2.3 Jumper Block CAUTION Do not move the jumper is set to configure mode and the computer is powered-up, the BIOS compares the processor version and the microcode version in the BIOS and reports if the two match. Figure 13. Location of
  • Intel BLKDG41MJ | Product Specification - Page 49
    Technical Reference Table 25. BIOS Setup Configuration Jumper Settings Function/Mode Jumper Setting Configuration Normal 1-2 The BIOS uses current configuration information and passwords for booting. Configure 2-3 Recovery None After the POST runs, Setup runs automatically. The maintenance
  • Intel BLKDG41MJ | Product Specification - Page 50
    Intel Desktop Board DG41MJ Technical Product Specification 2.4 Mechanical Considerations 2.4.1 Form Factor The board is designed to fit into a Mini-ITX-form-factor chassis. Figure 14 illustrates the mechanical form
  • Intel BLKDG41MJ | Product Specification - Page 51
    of the +5 VSB line • All timing parameters • All voltage tolerances For example, for a system consisting of a supported 65 W processor (see Section 1.4 on page 14 for a list of supported processors), 1 GB DDR2 RAM, one hard disk drive, one optical drive, and all board peripherals enabled, the
  • Intel BLKDG41MJ | Product Specification - Page 52
    Intel Desktop Board DG41MJ Technical Product Specification 2.5.2 Fan Header Current Capability CAUTION The processor fan must be connected to the processor fan header, not to a chassis fan header. Connecting the processor fan to a chassis fan header may result in onboard component damage that will
  • Intel BLKDG41MJ | Product Specification - Page 53
    Technical Reference Figure 15 shows the locations of the localized high temperature zones. Item A B C D Description Processor voltage regulator area Processor Intel 82G41 GMCH Intel 82801GB (ICH7) Figure 15. Localized High Temperature Zones 53
  • Intel BLKDG41MJ | Product Specification - Page 54
    Components Component Maximum Case Temperature Processor For processor case temperature, see processor datasheets and processor specification updates Intel 82G41 GMCH Intel 82801GB (ICH7) 102 oC calculated from predicted data at 55 ºC. The Intel Desktop Board DG41MJ MTBF is 130549.97 hours. 54
  • Intel BLKDG41MJ | Product Specification - Page 55
    Technical Reference 2.8 Environmental Table 29 lists the environmental specifications for the board. Table 29. Intel Desktop Board DG41MJ Environmental Specifications Parameter Specification Temperature Non-Operating Operating -20 °C to +70 °C 0 °C to +55 °C Shock Unpackaged 50 g
  • Intel BLKDG41MJ | Product Specification - Page 56
    Intel Desktop Board DG41MJ Technical Product Specification 56
  • Intel BLKDG41MJ | Product Specification - Page 57
    support. The BIOS displays a message during POST identifying the type of BIOS and a revision code. The initial production BIOSs are identified as MJG4110H.86A. When the BIOS Setup configuration jumper is set to configure mode and the computer is powered-up, the BIOS compares the processor version
  • Intel BLKDG41MJ | Product Specification - Page 58
    Intel Desktop Board DG41MJ Technical Product Specification Table 30 lists the BIOS Setup program menu features. Table 30. BIOS Setup Program Menu Bar Maintenance Main Advanced Security Clears passwords and displays processor information Displays processor and memory configuration Configures
  • Intel BLKDG41MJ | Product Specification - Page 59
    size, cache size, and processor speed • Dynamic data, supports an SMBIOS table interface for such operating systems. Using this support, an SMBIOS service Support Legacy USB support enables USB devices to be used even when the operating system's USB drivers are not yet available. Legacy USB support
  • Intel BLKDG41MJ | Product Specification - Page 60
    an incompatible BIOS. NOTE Review the instructions distributed with the upgrade utility before attempting a BIOS update. For information about BIOS update utilities Refer to http://support.intel.com/support/motherboards/desktop/s b/CS-022312.htm. 3.6.1 Language Support The BIOS Setup program
  • Intel BLKDG41MJ | Product Specification - Page 61
    connected to the Serial ATA interface Yes USB removable drive (a USB flash drive, for example) Yes USB diskette drive (with a 1.44 MB diskette) No USB hard disk drive No For information about BIOS recovery Refer to http://support.intel.com/support/motherboards/desktop/ sb/CS-023360.htm 61
  • Intel BLKDG41MJ | Product Specification - Page 62
    Intel Desktop Board DG41MJ Technical Product Specification 3.8 Boot Options In the BIOS Setup program, CD-ROM third. The fourth device is disabled. 3.8.1 CD-ROM Boot Booting from CD-ROM is supported in compliance to the El Torito bootable CD-ROM format specification. Under the Boot menu in the BIOS
  • Intel BLKDG41MJ | Product Specification - Page 63
    of option ROM boot time. NOTE It is possible to optimize the boot process to the point where the system boots so quickly that the Intel logo screen (or a custom logo splash screen) will not be seen. Monitors and hard disk drives with minimum initialization times can also contribute to a boot
  • Intel BLKDG41MJ | Product Specification - Page 64
    Intel Desktop Board DG41MJ Technical Product Specification 3.10 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the
  • Intel BLKDG41MJ | Product Specification - Page 65
    4.2 BIOS Beep Codes Whenever a recoverable error occurs during POST, the BIOS causes the board's speaker to beep an error message describing the problem (see Table 35). Table 35. Beep Codes Type Pattern Memory error Three long beeps Thermal warning Four alternating beeps: High tone, low tone
  • Intel BLKDG41MJ | Product Specification - Page 66
    Intel Desktop Board DG41MJ Technical Product Specification 4.4 Port 80h POST Codes During the POST, 00 - 0F Debug codes: Can be used by any PEIM/driver for debug. 10 - 1F 20 - 2F Host Processors: 1F is an unrecoverable processor error. Memory/Chipset: 2F is no memory detected or no useful
  • Intel BLKDG41MJ | Product Specification - Page 67
    POST Codes POST Code Description of POST Operation Host Processor 10 Power-on initialization of the host processor (Boot Strap Processor) 11 Host processor Cache initialization (including APs) 12 Starting Application processor initialization 13 SMM initialization Chipset 21 Initializing
  • Intel BLKDG41MJ | Product Specification - Page 68
    Intel Desktop Board DG41MJ Technical Product Specification 93 Enabling the keyboard 94 Clearing keyboard input buffer 95 Instructing keyboard controller to run Self Test (PS/2 only) Dy Trying boot selection y (y=0 to 15) PEI Core E0 Started dispatching PEIMs (emitted on first report of
  • Intel BLKDG41MJ | Product Specification - Page 69
    Codes (continued) POST Code Description of POST Operation DXE Drivers E7 Waiting for user input E8 Checking password E9 Entering BIOS EFI boot service ExitBootServices ( ) has been called F9 EFI runtime service SetVirtualAddressMap ( ) has been called FA EFI runtime service ResetSystem
  • Intel BLKDG41MJ | Product Specification - Page 70
    Intel Desktop Board DG41MJ Technical Product Specification Table 39. Typical Port 80h POST Sequence memory 34 Loading recovery capsule E4 Entered DXE phase 12 Starting application processor initialization 13 SMM initialization 50 Enumerating PCI busses 51 Allocating resourced to
  • Intel BLKDG41MJ | Product Specification - Page 71
    of Conformity statement • Product Ecology statements • Electromagnetic Compatibility (EMC) standards • Product certification markings 5.1.1 Safety Standards The Intel Desktop Board DG41MJ complies with the safety standards stated in Table 40 when correctly installed in a compatible host system
  • Intel BLKDG41MJ | Product Specification - Page 72
    Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board DG41MJ is in conformity with all applicable essential requirements necessary for CE marking, following the
  • Intel BLKDG41MJ | Product Specification - Page 73
    of this program, including the scope of covered products, available locations, shipping instructions, terms and conditions, etc Intel Product Recycling Program http://www.intel.com/intel/other/ehs/product_ecology Deutsch Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das
  • Intel BLKDG41MJ | Product Specification - Page 74
    pour en savoir plus sur ce programme, à savoir les produits concernés, les adresses disponibles, les instructions d'expédition, les conditions générales, etc http://www.intel.com/in tel/other/ehs/product_ecology Malay Sebagai sebahagian daripada komitmennya terhadap tanggungjawab persekitaran
  • Intel BLKDG41MJ | Product Specification - Page 75
    certain discrete components used on the board contain a small amount of lead which is necessary for component performance and/or reliability. This Intel Desktop Board is referred to as "Lead-free second level interconnect." The board substrate and the solder connections from the board to the
  • Intel BLKDG41MJ | Product Specification - Page 76
    Intel Desktop Board DG41MJ Technical Product Specification Table 41. Lead-Free Board Markings Description Lead-Free 2nd Level Interconnect: This symbol is used to identify electrical and electronic assemblies
  • Intel BLKDG41MJ | Product Specification - Page 77
    Regulatory Compliance and Battery Disposal Information 5.1.4 EMC Regulations The Intel Desktop Board DG41MJ complies with the EMC regulations stated in Table 42 when correctly installed in , it may cause radio interference. Install and use the equipment according to the instruction manual. 77
  • Intel BLKDG41MJ | Product Specification - Page 78
    . You may use this equipment in residential environments and other non-residential environments. 5.1.5 Product Certification Markings (Board Level) Intel Desktop Board DG41MJ has the product certification markings shown in Table 43: Table 43. Product Certification Markings Description UL joint US
  • Intel BLKDG41MJ | Product Specification - Page 79
    Regulatory Compliance and Battery Disposal Information 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. PRÉ
  • Intel BLKDG41MJ | Product Specification - Page 80
    Intel Desktop Board DG41MJ Technical Product Specification PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que
  • Intel BLKDG41MJ | Product Specification - Page 81
    Regulatory Compliance and Battery Disposal Information AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo
  • Intel BLKDG41MJ | Product Specification - Page 82
    Intel Desktop Board DG41MJ Technical Product Specification 82
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
March 2009
Order Number:
E62863-001US
The Intel
®
Desktop Board DG41MJ may contain design defects or errors known as errata that may cause the product to deviate from published specifications.
Current
characterized errata are documented in the Intel Desktop Board DG41MJ Specification Update.
Intel® Desktop Board
DG41MJ
Technical Product Specification