Intel BLKDQ35MP Product Specification

Intel BLKDQ35MP Manual

Get Intel BLKDQ35MP PDF manuals and user guides View all Intel BLKDQ35MP manuals
Add to My Manuals
Save this manual to your list of manuals

Intel BLKDQ35MP manual content summary:

  • Intel BLKDQ35MP | Product Specification - Page 1
    ® Desktop Board DQ35MP Technical Product Specification July 2007 Order Number: D96938-001US The Intel® Desktop Board DQ35MP may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata
  • Intel BLKDQ35MP | Product Specification - Page 2
    at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
  • Intel BLKDQ35MP | Product Specification - Page 3
    , power and environmental requirements, and the BIOS for the Intel® Desktop Board DQ35MP. It describes the standard product and hardware used on the board A map of the resources of the board The features supported by the BIOS Setup program A description of the BIOS error messages, beep codes,
  • Intel BLKDQ35MP | Product Specification - Page 4
    Intel Desktop Board DQ35MP Technical Product Specification Other Common Notation # GB GB/sec Gbit KB Kbit kbits/sec MB MB/sec Mbit Mbit/sec xxh x.x V * Used
  • Intel BLKDQ35MP | Product Specification - Page 5
    Board Layout 12 1.1.3 Block Diagram 14 1.2 Legacy Considerations 15 1.3 Online Support 15 1.4 Processor 15 1.5 System Memory 16 1.5.1 Memory Configurations 17 1.6 Intel® Q35 Express Chipset 19 1.6.1 Intel Q35 Graphics Subsystem 19 1.6.2 USB 21 1.6.3 Serial ATA Interfaces 21 1.7 Parallel
  • Intel BLKDQ35MP | Product Specification - Page 6
    Intel Desktop Board DQ35MP Technical Product Specification 2.2.2 Component-side Connectors and Headers 43 2.3 Autoconfiguration 58 3.3.2 PCI IDE Support 59 3.4 System Management BIOS (SMBIOS 59 3.5 Legacy USB Support 60 3.6 BIOS Updates 61 3.6.1 Language Support 61 3.6.2 Custom Splash Screen
  • Intel BLKDQ35MP | Product Specification - Page 7
    Memory Configurations 17 4. Audio Jack Retasking Support 24 5. LAN Connector LED States 27 6. Effects of Pressing the Power Switch 32 7. Power States and Targeted System Power 33 8. Wake-up Devices and Events 34 9. Intel AMT States 36 10. System Memory Map 41 11. Component-side Connectors
  • Intel BLKDQ35MP | Product Specification - Page 8
    Intel Desktop Board DQ35MP Technical Product Specification 23. States for a One-Color Power LED 49 24. States for a Two-Color Power LED 49 25. BIOS Setup
  • Intel BLKDQ35MP | Product Specification - Page 9
    1 Product Description What This Chapter Contains 1.1 Overview 10 1.2 Legacy Considerations 15 1.3 Online Support 15 1.4 Processor 15 1.5 System Memory 16 1.6 Intel® Q35 Express Chipset 19 1.7 Parallel IDE Controller 22 1.8 Real-Time Clock Subsystem 23 1.9 Legacy I/O Controller 23 1.10 Audio
  • Intel BLKDQ35MP | Product Specification - Page 10
    MHz system bus • Four 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets • Support for DDR2 800 or DDR2 667 MHz DIMMs • Support for up to 8 GB of system memory using DDR2 800 or DDR2 667 DIMMs Intel® Q35 Express Chipset, consisting of: • Intel® 82Q35 Graphics and Memory Controller Hub (GMCH
  • Intel BLKDQ35MP | Product Specification - Page 11
    support • Wake on PCI, PCI Express, RS-232, front panel, USB ports, and LAN Expansion Capabilities Hardware Monitor Subsystem • One PCI Express x16 bus add-in card connector • Two PCI Express x1 bus add-in card connectors • One PCI Conventional bus connector • Intel® Quiet System Technology Intel
  • Intel BLKDQ35MP | Product Specification - Page 12
    Intel Desktop Board DQ35MP Technical Product Specification 1.1.2 Board Layout Figure 1 shows the location of the major components. Figure 1. Major Board Components Table 2 lists the components identified in Figure 1. 12
  • Intel BLKDQ35MP | Product Specification - Page 13
    B sockets Q Serial port header R Main Power connector (2 X 12) S Front panel header T Auxiliary front panel power LED header U Intel 82801IDO I/O Controller Hub (ICH9DO) V BIOS Setup configuration jumper block W Front chassis fan header X Serial ATA connectors [5] Y External Serial
  • Intel BLKDQ35MP | Product Specification - Page 14
    Intel Desktop Board DQ35MP Technical Product Specification 1.1.3 Block Diagram Figure 2 is a block diagram of the major functional areas. Figure 2. Block Diagram 14
  • Intel BLKDQ35MP | Product Specification - Page 15
    index.htm http://support.intel.com/support/motherboards/desktop http://www.intel.com/products/motherboard/DQ35MP/index.htm http://www.intel.com/go/findcpu http://www.intel.com/products/desktop/chipsets/index.htm http://downloadcenter.intel.com http://support.intel.com/support/motherboards/desktop/sb
  • Intel BLKDQ35MP | Product Specification - Page 16
    Intel Desktop Board DQ35MP Technical Product Specification CAUTION Use only the fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data
  • Intel BLKDQ35MP | Product Specification - Page 17
    4 GB 8 GB 4 GB 8 GB For information about... Tested Memory Refer to: http://support.intel.com/support/motherboards/desktop/sb/CS025414.htm 1.5.1 Memory Configurations The Intel 82Q35 GMCH supports the following types of memory organization: • Dual channel (Interleaved) mode. This mode offers the
  • Intel BLKDQ35MP | Product Specification - Page 18
    Intel Desktop Board DQ35MP Technical Product Specification Figure 3 illustrates the memory channel and DIMM configuration. NOTE The DIMM 0 sockets channel, single channel, or flex mode), DIMM 0 of Channel A must always be populated. This is a requirement of the Intel® Management Engine in ICH9DO. 18
  • Intel BLKDQ35MP | Product Specification - Page 19
    . The ICH9DO is a centralized controller for the board's I/O paths. The chipset supports the following features: • Onboard Graphics • Dynamic Video Memory Technology • USB 2.0 • Serial ATA 3 Gbps For information about The Intel Q35 Express chipset Resources used by the chipset Refer to http://www
  • Intel BLKDQ35MP | Product Specification - Page 20
    Intel Desktop Board DQ35MP Technical Product Specification • Display ⎯ Supports analog displays up to 2048 x 1536 at 75 Hz refresh (QXGA) ⎯ Dual independent display support ⎯ DDC2B compliant interface with Advanced Digital Display 2 card or Media Expansion Card (ADD2/MEC), support for TV-out/TV-in
  • Intel BLKDQ35MP | Product Specification - Page 21
    of six Serial ATA devices. A point-to-point interface is used for host to device connections, unlike Parallel ATA IDE which supports a master/slave configuration and two devices per channel. For compatibility, the underlying Serial ATA functionality is transparent to the operating system. The
  • Intel BLKDQ35MP | Product Specification - Page 22
    Intel Desktop Board DQ35MP Technical Product Specification 1.6.3.2 Serial ATA RAID The DQ35MP Desktop Board supports the following RAID (Redundant Array of Independent Drives) levels: • RAID 0 - data striping • RAID 1 - data mirroring • RAID 0+1 (or RAID 10) - data striping and mirroring • RAID 5 -
  • Intel BLKDQ35MP | Product Specification - Page 23
    Serial Port The board has one serial port header located on the component side of the board. The serial port supports data transfers at speeds up to 115.2 kbits/sec with BIOS support. For information about The location of the serial port header The signal names of the serial port header Refer
  • Intel BLKDQ35MP | Product Specification - Page 24
    ICH9DO • RealTek ALC268-GR audio codec • Back panel audio connectors • Component-side audio headers: ⎯ Intel® High Definition Audio front panel header ⎯ HD Audio Link header The audio subsystem supports the following features: • A signal-to-noise (S/N) ratio of ≤95 dB playback quality, and ≤90
  • Intel BLKDQ35MP | Product Specification - Page 25
    Audio Subsystem Software Audio software and drivers are available from Intel's World Wide Web site. For information about Obtaining audio mic in and line out signals for the front panel. Microphone bias is supported for both the front and back panel microphone connectors. The front/back panel
  • Intel BLKDQ35MP | Product Specification - Page 26
    LAN software and drivers Refer to http://downloadcenter.intel.com 1.11.1 Intel® 82566DM-2 Gigabit Ethernet Controller The Intel 82566DM-2 Gigabit Ethernet Controller supports the following features: • Intel® Active Management Technology (Intel® AMT) support • PCI Express link • 10/100/1000 IEEE
  • Intel BLKDQ35MP | Product Specification - Page 27
    Product Description 1.11.3 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 5 below). Item A B Description Link LED (Green) Data Rate LED (Green/Yellow) Figure 5. LAN Connector LED Locations Table 5 describes the LED states when the board
  • Intel BLKDQ35MP | Product Specification - Page 28
    Intel Active Management Technology subsystem consists of: • ARC4 microcontroller embedded in the Intel® Q35 Graphics and Memory Controller Hub (GMCH) • Intel 82801IDO Controller Hub (ICH9DO) • Intel API ⎯ Web Services for Management (WS-MAN) protocol support • Remote troubleshooting and recovery that
  • Intel BLKDQ35MP | Product Specification - Page 29
    time-consuming manual inventory tracking, Intel AMT-trusted certificate as well as use a remote management application that supports Intel® Management Engine Interface (Intel® MEI) and one for the Local Manageability Service (LMS) plus Serial over LAN (SoL). For information about Obtaining Intel
  • Intel BLKDQ35MP | Product Specification - Page 30
    off as needed 1.13.2 Fan Monitoring Fan monitoring can be implemented using Intel® Desktop Utilities or third-party software. For information about The functions .2.2, page 35 1.13.3 Chassis Intrusion and Detection The board supports a chassis security feature that detects if the chassis cover is
  • Intel BLKDQ35MP | Product Specification - Page 31
    Product Description 1.13.4 Thermal Monitoring Figure 6 shows the locations of the thermal sensors and fan headers. Item A B C D E F G Description Rear chassis fan Thermal diode, located on the GMCH die Thermal diode, located on processor die Remote thermal sensor Processor fan Thermal diode,
  • Intel BLKDQ35MP | Product Specification - Page 32
    is implemented at several levels, including: • Software support through Advanced Configuration and Power Interface (ACPI) • Hardware support: ⎯ Power connector ⎯ Fan headers ⎯ LAN wake capabilities ⎯ Intel Management Engine Wake-on-LAN ⎯ Intel AMT status indicator LED ⎯ Instantly Available PC
  • Intel BLKDQ35MP | Product Specification - Page 33
    into a low-power state. Table 7 lists the power states supported by the board along with the associated system power targets. See , except when provided by battery or external source. No power to the system. Service can be performed safely. Notes: 1. Total system power is dependent on the system
  • Intel BLKDQ35MP | Product Specification - Page 34
    ENERGY STAR requirements and recommended configurations Refer to http://www.intel.com/go/energystar 1.14.1.3 Wake-up Devices and Events provides full ACPI support. In addition, software, drivers, and peripherals must fully support ACPI wake events. 1.14.2 Hardware Support CAUTION Ensure that
  • Intel BLKDQ35MP | Product Specification - Page 35
    Product Description • LAN wake capabilities • Intel Management Engine Wake-on-LAN • Intel AMT status indicator LED • Instantly Available PC technology • Wake from USB • PME# signal wake-up support • WAKE# signal wake-up support • +5V standby power indicator LED LAN wake capabilities and Instantly
  • Intel BLKDQ35MP | Product Specification - Page 36
    : • The PCI Express WAKE# signal • The PCI bus PME# signal for PCI 2.3 compliant LAN designs ⎯ By Ping ⎯ Magic Packet • The onboard LAN subsystem 1.14.2.4 Intel Management Engine Wake-on-LAN The board supports waking the Management Engine over the network. This can be enabled in the BIOS and allows
  • Intel BLKDQ35MP | Product Specification - Page 37
    Product Description Figure 7. Location of the Intel AMT Status Indicator LED 1.14.2.6 Instantly Available PC be used to wake the computer. The use of Instantly Available PC technology requires operating system support and PCI 2.3 compliant add-in cards and drivers. 1.14.2.7 Wake from USB USB
  • Intel BLKDQ35MP | Product Specification - Page 38
    Intel Desktop Board DQ35MP Technical Product Specification 1.14.2.8 PME# Signal Wake-up Support When the PME# signal on the PCI bus is asserted, the computer wakes from an ACPI S1, S3, S4, or S5 state (with Wake on PME enabled in BIOS). 1.14.2.9 WAKE# Signal Wake-up Support When the WAKE# signal on
  • Intel BLKDQ35MP | Product Specification - Page 39
    , PCI Express ports (up to 512 MB) • Memory-mapped I/O that is dynamically allocated for PCI Conventional and PCI Express add-in cards • Base graphics memory support (1 MB or 8 MB) • Intel Management Engine Interface single channel (8 MB) or dual channel (16 MB) 39
  • Intel BLKDQ35MP | Product Specification - Page 40
    Intel Desktop Board DQ35MP Technical Product Specification The amount of installed memory that can be used will vary based on add-in cards and BIOS settings.
  • Intel BLKDQ35MP | Product Specification - Page 41
    Technical Reference Table 10 lists the system memory map. Table 10. System Memory Map Address Range (decimal) Address Range (hex) 1024 K - 8388608 K 100000 - 1FFFFFFFF 960 K - 1024 K F0000 - FFFFF 896 K - 960 K 800 K - 896 K E0000 - EFFFF C8000 - DFFFF 640 K - 800 K 639 K - 640 K 512 K -
  • Intel BLKDQ35MP | Product Specification - Page 42
    Intel Desktop Board DQ35MP Technical Product Specification 2.2.1 Back Panel Connectors Figure 10 shows the location of the back panel connectors. Item A B C D E F G H Description VGA port USB ports [2]
  • Intel BLKDQ35MP | Product Specification - Page 43
    Technical Reference 2.2.2 Component-side Connectors and Headers Figure 11 shows the locations of the component-side connectors and headers. Figure 11. Component-side Connectors and Headers 43
  • Intel BLKDQ35MP | Product Specification - Page 44
    Intel Desktop Board DQ35MP Technical Product Specification Table 11 lists the component-side connectors and headers identified in Figure 11. Table 11. Component-side Connectors and
  • Intel BLKDQ35MP | Product Specification - Page 45
    Technical Reference 2.2.2.1 Signal Tables for the Connectors and Headers Table 12. HD Audio Link Header Pin Signal Name 1 BCLK 3 RST# 5 SYNC 7 SDO 9 SDI0 11 SDI1 13 Aud RSVD 15 Aud RSVD Pin 2 4 6 8 10 12 14 16 Signal Name Ground 3.3 VCC Ground 3.3 VCC +12 V Key (no pin) 3.3 V
  • Intel BLKDQ35MP | Product Specification - Page 46
    Intel Desktop Board DQ35MP Technical Product Specification Table 16. Chassis Intrusion are routed to the PCI Conventional bus connector. This enables PCI Conventional bus add-in boards with SMBus support to access sensor data on the board. The specific SMBus signals are as follows: ⎯ The SMBus
  • Intel BLKDQ35MP | Product Specification - Page 47
    the following power supply connectors: • Main power - a 2 x 12 connector. This connector is compatible with 2 x 10 connectors previously used on Intel Desktop Boards. The board supports the use of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables. When using a power supply with
  • Intel BLKDQ35MP | Product Specification - Page 48
    Intel Desktop Board DQ35MP Technical Product Specification 2.2.2.5 Front Panel Header This section describes the functions of the front panel header. Table 22 lists the signal names
  • Intel BLKDQ35MP | Product Specification - Page 49
    Technical Reference 2.2.2.5.2 Reset Switch Header Pins 5 and 7 can be connected to a momentary single pole, single throw (SPST) type switch that is normally open. When the switch is closed, the board resets and runs the POST. 2.2.2.5.3 Power/Sleep LED Header Pins 2 and 4 can be connected to a
  • Intel BLKDQ35MP | Product Specification - Page 50
    Intel Desktop Board DQ35MP Technical Product Specification 2.2.2.6 Front Panel USB Headers Figure 13 is a connection diagram for the front panel USB headers. # INTEGRATOR'S NOTES • The +5 V DC
  • Intel BLKDQ35MP | Product Specification - Page 51
    Technical Reference 2.3 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 14 shows the location of the jumper block. The jumper
  • Intel BLKDQ35MP | Product Specification - Page 52
    Intel Desktop Board DQ35MP Technical Product Specification 2.4 Mechanical Considerations 2.4.1 Form Factor The board is designed to fit into an ATX-form-factor chassis. Figure 15 illustrates
  • Intel BLKDQ35MP | Product Specification - Page 53
    V1 12 V2 Current 15 A 15 A 10 A 10 A -12 V 0.3 A 5 VSB 3.0 A For information about Selecting an appropriate power supply Refer to http://support.intel.com/support/motherboards/de sktop/sb/CS-026472.htm 2.5.2 Fan Header Current Capability CAUTION The processor fan must be connected to the
  • Intel BLKDQ35MP | Product Specification - Page 54
    responsibility for determining the adequacy of any thermal or system design remains solely with the reader. Intel makes no warranties or representations that merely following the instructions presented in this document will result in a system with adequate thermal performance. CAUTION Ensure that
  • Intel BLKDQ35MP | Product Specification - Page 55
    Figure 16 shows the locations of the localized high temperature zones. Item A B C D Description Processor voltage regulator area Processor Intel 82Q35 GMCH Intel 82801IDO ICH9DO Figure 16. Localized High Temperature Zones Table 28 provides maximum case temperatures for the board components that
  • Intel BLKDQ35MP | Product Specification - Page 56
    Intel Desktop Board DQ35MP Technical Product Specification 2.7 Reliability The Mean Time Between Failures (MTBF) prediction is calculated using component and subassembly random failure rates. The calculation
  • Intel BLKDQ35MP | Product Specification - Page 57
    PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The BIOS displays a message during POST identifying the type of . The menu bar is shown below. Maintenance Main Advanced Security Power Boot Intel ME Exit NOTE The maintenance menu is displayed only when the board is
  • Intel BLKDQ35MP | Product Specification - Page 58
    and security features Power Configures power management features and power supply controls Boot Selects boot options Intel ME Exit Configures options for the Intel Management Engine and Intel Active Management Technology Saves or discards changes to Setup program options Table 31 lists the
  • Intel BLKDQ35MP | Product Specification - Page 59
    capability of the drive. You can override the auto-configuration options by specifying manual configuration in the BIOS Setup program. To use ATA-66/100 features the The BIOS supports an SMBIOS table interface for such operating systems. Using this support, an SMBIOS service-level application
  • Intel BLKDQ35MP | Product Specification - Page 60
    support is used to access the BIOS Setup program, and to install an operating system that supports USB. By default, Legacy USB support is set to Enabled. Legacy USB support USB support was Intel® Integrator Toolkit. To install an operating system that supports USB, verify that Legacy USB support
  • Intel BLKDQ35MP | Product Specification - Page 61
    incompatible BIOS. NOTE Review the instructions distributed with the upgrade utility before attempting a BIOS update. For information about BIOS update utilities Refer to http://support.intel.com/support/motherboards/de sktop/sb/CS-022312.htm. 3.6.1 Language Support The BIOS Setup program and
  • Intel BLKDQ35MP | Product Specification - Page 62
    Yes USB diskette drive (with a 1.44 MB diskette) No USB hard disk drive No For information about BIOS recovery Refer to http://support.intel.com/support/motherboards/desktop/ sb/CS-022312.htm 3.8 Boot Options In the BIOS Setup program, the user can choose to boot from a diskette drive, hard
  • Intel BLKDQ35MP | Product Specification - Page 63
    Overview of BIOS Features 3.8.3 Booting Without Attached Devices For use in embedded applications, the BIOS has been designed so that after passing the POST, the operating system loader is invoked even if the following devices are not present: • Video adapter • Keyboard • Mouse 3.8.4 Changing the
  • Intel BLKDQ35MP | Product Specification - Page 64
    Intel Desktop Board DQ35MP Technical Product Specification 3.9.2 BIOS Boot Optimizations Use of It is possible to optimize the boot process to the point where the system boots so quickly that the Intel logo screen (or a custom logo splash screen) will not be seen. Monitors and hard disk drives with
  • Intel BLKDQ35MP | Product Specification - Page 65
    Overview of BIOS Features Table 34 shows the effects of setting the supervisor password and user password. This table is for reference only and is not displayed on the screen. Table 34. Supervisor and User Password Functions Password Set Supervisor Mode User Mode Setup Options Neither Can
  • Intel BLKDQ35MP | Product Specification - Page 66
    Intel Desktop Board DQ35MP Technical Product Specification 66
  • Intel BLKDQ35MP | Product Specification - Page 67
    Refer to Figure 1, page 12 4.2 BIOS Beep Codes Whenever a recoverable error occurs during POST, the BIOS displays an error message describing the problem (see Table 35). Table 35. Beep Codes Type Pattern Memory error Three long beeps Thermal warning Four alternating beeps: High tone, low
  • Intel BLKDQ35MP | Product Specification - Page 68
    Intel Desktop Board DQ35MP Technical Product Specification 4.4 Port 80h POST Codes During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h. If
  • Intel BLKDQ35MP | Product Specification - Page 69
    Error Messages and Beep Codes Table 38. Port 80h POST Codes POST Code Description of POST Operation Host Processor 10 Power-on initialization of the host processor (Boot Strap Processor) 11 Host processor cache initialization (including APs) 12 Starting Application processor initialization
  • Intel BLKDQ35MP | Product Specification - Page 70
    Intel Desktop Board DQ35MP Technical Product Specification Table 38. Port 80h POST Codes (continued) POST Code Description of POST Operation Keyboard (USB) 90 Resetting keyboard 91
  • Intel BLKDQ35MP | Product Specification - Page 71
    system boot F4 Entering Sleep state F5 Exiting Sleep state F8 EFI boot service ExitBootServices ( ) has been called F9 EFI runtime service SetVirtualAddressMap ( ) has been called FA EFI runtime service ResetSystem ( ) has been called PEIMs/Recovery 30 Crisis Recovery has initiated per
  • Intel BLKDQ35MP | Product Specification - Page 72
    Intel Desktop Board DQ35MP Technical Product Specification Table 39. Typical Port 80h POST Sequence POST Code Description 21 Initializing a chipset component 22 Reading SPD from memory
  • Intel BLKDQ35MP | Product Specification - Page 73
    5 Regulatory Compliance and Battery Disposal Information What This Chapter Contains 5.1 Regulatory Compliance 73 5.2 Battery Disposal Information 81 5.1 Regulatory Compliance This section contains the following regulatory compliance information for Desktop Board DQ35MP: • Safety standards •
  • Intel BLKDQ35MP | Product Specification - Page 74
    Board DQ35MP Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel Desktop Board DQ35MP is in conformity with all applicable essential requirements necessary for CE marking
  • Intel BLKDQ35MP | Product Specification - Page 75
    of this program, including the scope of covered products, available locations, shipping instructions, terms and conditions, etc Intel Product Recycling Program http://www.intel.com/intel/other/ehs/product_ecology Deutsch Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das
  • Intel BLKDQ35MP | Product Specification - Page 76
    pour en savoir plus sur ce programme, à savoir les produits concernés, les adresses disponibles, les instructions d'expédition, les conditions générales, etc http://www.intel.com/in tel/other/ehs/product_ecology Malay Sebagai sebahagian daripada komitmennya terhadap tanggungjawab persekitaran
  • Intel BLKDQ35MP | Product Specification - Page 77
    Bu programın ürün kapsamı, ürün iade merkezleri, nakliye talimatları, kayıtlar ve şartlar v.s dahil bütün ayrıntılarını ögrenmek için lütfen http://www.intel.com/intel/other/ehs/product_ecology Web sayfasına gidin. 5.1.3.3 Lead Free Desktop Board This Desktop Board is a European Union Restriction of
  • Intel BLKDQ35MP | Product Specification - Page 78
    Intel Desktop Board DQ35MP Technical Product Specification Table 41. Lead-Free Board Markings Description Lead-Free 2nd Level Interconnect: This symbol is used to identify electrical
  • Intel BLKDQ35MP | Product Specification - Page 79
    ). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. 79
  • Intel BLKDQ35MP | Product Specification - Page 80
    along with a flammability rating (solder side). China RoHS/Environmentally Friendly Use Period Logo: This is an example of the symbol used on Intel Desktop Boards and associated collateral. The color of the mark may vary depending upon the application. The Environmental Friendly Usage Period (EFUP
  • Intel BLKDQ35MP | Product Specification - Page 81
    Regulatory Compliance and Battery Disposal Information 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations.
  • Intel BLKDQ35MP | Product Specification - Page 82
    Intel Desktop Board DQ35MP Technical Product Specification PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del
  • Intel BLKDQ35MP | Product Specification - Page 83
    Regulatory Compliance and Battery Disposal Information AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo
  • Intel BLKDQ35MP | Product Specification - Page 84
    Intel Desktop Board DQ35MP Technical Product Specification 84
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
July 2007
Order Number:
D96938-001US
The Intel
®
Desktop Board DQ35MP may contain design defects or errors known as errata that may cause the product to deviate from published specifications.
Current
characterized errata are documented in the Intel Desktop Board DQ35MP Specification Update.
Intel® Desktop Board
DQ35MP
Technical Product Specification