Intel BOXDP35DPM Product Specification

Intel BOXDP35DPM Manual

Get Intel BOXDP35DPM PDF manuals and user guides View all Intel BOXDP35DPM manuals
Add to My Manuals
Save this manual to your list of manuals

Intel BOXDP35DPM manual content summary:

  • Intel BOXDP35DPM | Product Specification - Page 1
    May 2007 Order Number: D88103-001US The Intel® Desktop Board DP35DP may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board DP35DP Specification Update.
  • Intel BOXDP35DPM | Product Specification - Page 2
    Intel® Desktop Board DP35DP with BIOS identifier DPP3510J.86A. Changes to this specification will be published in the Intel or instructions marked "reserved" or "undefined." Intel reserves 708-296-9333. Intel, the Intel logo, Core, and Celeron are registered trademarks of Intel Corporation or its
  • Intel BOXDP35DPM | Product Specification - Page 3
    components, connectors, power and environmental requirements, and the BIOS for the Intel® Desktop Board DP35DP. It describes the standard product and of the resources of the board The features supported by the BIOS Setup program A description of the BIOS error messages, beep codes, and POST codes
  • Intel BOXDP35DPM | Product Specification - Page 4
    Intel Desktop Board DP35DP Technical Product Specification Other Common Notation # GB GB/sec Gbit KB Kbit kbits/sec MB MB/sec Mbit Mbit/sec xxh x.x V * Used after a signal name to identify an active-low signal (such as USBP0#) Gigabyte (1,073,741,824 bytes) Gigabytes per
  • Intel BOXDP35DPM | Product Specification - Page 5
    10 1.1.2 Board Layout 12 1.1.3 Block Diagram 14 1.2 Legacy Considerations 15 1.3 Online Support 15 1.4 Processor 15 1.5 System Memory 16 1.5.1 Memory Configurations 17 1.6 Intel® P35 Express Chipset 19 1.6.1 Intel® Viiv™ Processor Technology 19 1.6.2 USB 19 1.6.3 Serial ATA Interfaces 20
  • Intel BOXDP35DPM | Product Specification - Page 6
    Intel Desktop Board DP35DP Technical Product Specification 2.4 BIOS Flash Memory Organization 58 3.3 Resource Configuration 58 3.3.1 PCI* Autoconfiguration 58 3.3.2 PCI IDE Support 59 3.4 System Management BIOS (SMBIOS 59 3.5 Legacy USB Support 60 3.6 BIOS Updates 60 3.6.1 Language Support
  • Intel BOXDP35DPM | Product Specification - Page 7
    13 3. Supported Memory Configurations 16 4. Audio Jack Retasking Support 23 5. Auxiliary Front Panel Power/Sleep LED Header 46 19. Processor Core Power Connector 47 20. Main Power Connector 47 21. a Two-Color Power LED 49 24. BIOS Setup Configuration Jumper Settings 51 25. Recommended Power
  • Intel BOXDP35DPM | Product Specification - Page 8
    Intel Desktop Board DP35DP Technical Product Specification 28. Desktop Board DP35DP Environmental Specifications 56 29. BIOS Setup Program Menu Bar 58 30. BIOS Setup Program Function Keys 58 31. Acceptable Drives/Media Types for BIOS Recovery 61 32. Boot Device Menu Options 62 33. Supervisor
  • Intel BOXDP35DPM | Product Specification - Page 9
    1 Product Description What This Chapter Contains 1.1 Overview 10 1.2 Legacy Considerations 15 1.3 Online Support 15 1.4 Processor 15 1.5 System Memory 16 1.6 Intel® P35 Express Chipset 19 1.7 Parallel IDE Controller 21 1.8 Real-Time Clock Subsystem 21 1.9 Legacy I/O Controller 22 1.10 Audio
  • Intel BOXDP35DPM | Product Specification - Page 10
    Feature Summary Form Factor ATX (11.60 inches by 9.60 inches [294.64 millimeters by 243.84 millimeters]) Processor Memory Chipset Support for the following: • Intel® Core™2 Quad processor in an LGA775 socket with a 1066 MHz system bus • Intel® Core™2 Duo processor in an LGA775 socket with a 1066
  • Intel BOXDP35DPM | Product Specification - Page 11
    to RAM support • Wake on PCI, RS-232, front panel, PS/2 devices, USB ports, LAN, and CIR Expansion Capabilities Hardware Monitor Subsystem • One PCI Express x16 bus add-in card connector • Three PCI Express x1 bus add-in card connectors • Three PCI Conventional bus connectors • Intel® Quiet System
  • Intel BOXDP35DPM | Product Specification - Page 12
    Intel Desktop Board DP35DP Technical Product Specification 1.1.2 Board Layout Figure 1 shows the location of the major components. Figure 1. Major Board Components Table 2 lists the components identified in Figure 1. 12
  • Intel BOXDP35DPM | Product Specification - Page 13
    core power connector (2 X 2) N Back panel CIR emitter (output) header O Rear chassis fan connector P LGA775 processor socket Q Intel Y Battery Z Front chassis fan header AA Intel 82801IR I/O Controller Hub (ICH9R) BB BIOS Setup configuration jumper block CC Auxiliary front panel
  • Intel BOXDP35DPM | Product Specification - Page 14
    Intel Desktop Board DP35DP Technical Product Specification 1.1.3 Block Diagram Figure 2 is a block diagram of the major functional areas. Figure 2. Block Diagram 14
  • Intel BOXDP35DPM | Product Specification - Page 15
    ://www.intel.com/products/motherboard/DP35DP/index.htm http://www.intel.com/go/findcpu http://www.intel.com/products/desktop/chipsets/index.htm http://downloadcenter.intel.com 1.4 Processor The board is designed to support the following processors: • Intel Core 2 Quad processor in an LGA775 socket
  • Intel BOXDP35DPM | Product Specification - Page 16
    DDR2 667 1 Gbit 512 MB 2 GB DDR2 800 512 Mbit 256 MB 1 GB DDR2 800 1 Gbit 512 MB 2 GB Maximum capacity with four identical x8 Double-sided DIMMs 4 GB 8 GB 4 GB 8 GB For information about... Tested Memory Refer to: http://support.intel.com/support/motherboards/desktop/sb/CS025414.htm 16
  • Intel BOXDP35DPM | Product Specification - Page 17
    mode results in multiple zones of dual and single channel operation across the whole of DRAM memory. To use flex mode, it is necessary to populate both channels. For information about... Memory Configuration Examples Refer to: http://www.intel.com/support/motherboards/desktop/sb/cs011965.htm 17
  • Intel BOXDP35DPM | Product Specification - Page 18
    Intel Desktop Board DP35DP Technical Product Specification Figure 3 illustrates the memory channel and DIMM configuration. NOTE The DIMM 0 sockets of both channels are blue. The DIMM 1 sockets of both channels are black. Figure 3. Memory Channel and DIMM Configuration # INTEGRATOR'S NOTE Regardless
  • Intel BOXDP35DPM | Product Specification - Page 19
    to the CPU, memory, and PCI Express. The ICH9R is a centralized controller for the board's I/O paths. For information about The Intel P35 Express chipset Resources used by the chipset Refer to http://www.intel.com/products/desktop/chipsets/index.htm Chapter 2 The chipset supports the following
  • Intel BOXDP35DPM | Product Specification - Page 20
    Refer to Figure 10, page 42 1.6.3.2 Serial ATA RAID The DP35DP Desktop Board supports the following RAID (Redundant Array of Independent Drives) levels: • RAID 0 - data striping • RAID 1 - data mirroring • RAID 0+1 (or RAID 10) - data striping and mirroring • RAID 5 - distributed parity 20
  • Intel BOXDP35DPM | Product Specification - Page 21
    and target throttling and transfer rates of up to 33 MB/sec. • ATA-66: DMA protocol on IDE bus supporting host and target throttling and transfer rates of up to 66 MB/sec. ATA-66 protocol is similar to Ultra DMA and is device driver compatible. • ATA-100: DMA protocol on IDE bus allows
  • Intel BOXDP35DPM | Product Specification - Page 22
    required to buy or create their own interface modules to plug into Intel Desktop Boards for this feature to work. These interface modules may side of the board. The serial port supports data transfers at speeds up to 115.2 kbits/sec with BIOS support. For information about The location of the
  • Intel BOXDP35DPM | Product Specification - Page 23
    panel - Black No Yes Back panel - Orange No Yes Supports Microphone? No Yes No No Yes No No Supports Headphones? Yes No No Yes No No No 1.10.1 Audio Subsystem Software Audio software and drivers are available from Intel's World Wide Web site. For information about Obtaining audio software
  • Intel BOXDP35DPM | Product Specification - Page 24
    Intel out signals for the front panel. Microphone bias is supported for both the front and back panel microphone connectors. The front/back panel audio connectors are configurable through the audio device drivers. The available configurable audio ports are shown in Figure 4. Item
  • Intel BOXDP35DPM | Product Specification - Page 25
    wake capabilities ⎯ LAN subsystem software For information about LAN software and drivers Refer to http://downloadcenter.intel.com 1.11.1 Intel® 82566DC Gigabit Ethernet Controller The Intel 82566DC Gigabit Ethernet Controller supports the following features: • PCI Express link • 10/100/1000 IEEE
  • Intel BOXDP35DPM | Product Specification - Page 26
    Desktop Board DP35DP Technical Product Specification 1.11.2 LAN Subsystem Software LAN software and drivers are available from Intel's World Wide Web site. For information about Obtaining LAN software and drivers Refer to Section 1.2, page 15 1.11.3 RJ-45 LAN Connector with Integrated LEDs Two
  • Intel BOXDP35DPM | Product Specification - Page 27
    off as needed 1.12.2 Fan Monitoring Fan monitoring can be implemented using Intel® Desktop Utilities or third-party software. For information about The functions .2.2, page 33 1.12.3 Chassis Intrusion and Detection The board supports a chassis security feature that detects if the chassis cover is
  • Intel BOXDP35DPM | Product Specification - Page 28
    Intel Desktop Board DP35DP Technical Product Specification 1.12.4 Thermal Monitoring Figure 6 shows the locations of the thermal sensors and fan headers. Item A B C D E F G Description Auxiliary rear chassis
  • Intel BOXDP35DPM | Product Specification - Page 29
    ⎯ LAN wake capabilities ⎯ Instantly Available PC technology ⎯ Wake from USB ⎯ Power Management Event signal (PME#) wake-up support ⎯ Intel® Quick Resume Technology Drivers (Intel® QRTD) (optional) ⎯ Wake from Consumer IR 1.13.1 ACPI ACPI gives the operating system direct control over the power
  • Intel BOXDP35DPM | Product Specification - Page 30
    Intel into a low-power state. Table 7 lists the power states supported by the board along with the associated system power targets. See except when provided by battery or external source. No power to the system. Service can be performed safely. Notes: 1. Total system power is dependent on the
  • Intel BOXDP35DPM | Product Specification - Page 31
    configurations Refer to http://www.intel.com/go/energystar 1.13.1.3 For LAN and PME# signal, S5 is disabled by default in the BIOS Setup program. Setting this option to Power On will enable a wake- support. In addition, software, drivers, and peripherals must fully support ACPI wake events. 31
  • Intel BOXDP35DPM | Product Specification - Page 32
    • PME# signal wake-up support • WAKE# signal wake-up support • Intel Quick Resume Technology Drivers (Intel QRTD) (optional) • Wake from The computer's response can be set using the Last Power State feature in the BIOS Setup program's Boot menu. For information about The location of the main power
  • Intel BOXDP35DPM | Product Specification - Page 33
    input of the hardware monitoring and fan control device. • All fan headers support closed-loop fan control that can adjust the fan speed or switch the fan powers up the computer. Depending on the LAN implementation, the board supports LAN wake capabilities with ACPI in the following ways: • The PCI
  • Intel BOXDP35DPM | Product Specification - Page 34
    Intel of Instantly Available PC technology requires operating system support and PCI 2.3 compliant add-in cards and drivers. 1.13.2.5 Wake from USB USB bus activity S4, or S5 state (with Wake on PME enabled in BIOS). 1.13.2.7 WAKE# Signal Wake-up Support When the WAKE# signal on the PCI Express bus is
  • Intel BOXDP35DPM | Product Specification - Page 35
    Product Description 1.13.2.8 +5 V Standby Power Indicator LED The +5 V standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 7 shows the location of the standby power indicator LED. CAUTION If AC power has been switched off and the standby
  • Intel BOXDP35DPM | Product Specification - Page 36
    Intel Desktop Board DP35DP Technical Product Specification 36
  • Intel BOXDP35DPM | Product Specification - Page 37
    registers, internal graphics ranges, PCI Express ports (up to 512 MB) • Memory-mapped I/O that is dynamically allocated for PCI Conventional and PCI Express add-in cards • Base graphics memory support (1 MB or 8 MB) • Intel Management Engine Interface single channel (8 MB) or dual channel (16
  • Intel BOXDP35DPM | Product Specification - Page 38
    0F0000H 0EFFFFH 0E0000H 0DFFFFH 0C0000H 0BFFFFH 0A0000H 09FFFFH 00000H Upper BIOS area (64 KB) Lower BIOS area (64 KB; 16 KB x 4) Add-in Card BIOS and Buffer area (128 KB; 16 KB x 8) Standard PCI/ ISA Video Memory (SMM Memory) 128 KB DOS area (640 KB) 1 MB 960 KB 896 KB 768 KB 640 KB 0 KB OM18311
  • Intel BOXDP35DPM | Product Specification - Page 39
    - 7FFFF Size 8191 MB 64 KB 64 KB 96 KB 160 KB 1 KB 127 KB 512 KB Description Extended memory Runtime BIOS Reserved Potential available high DOS memory (open to the PCI bus). Dependent on video adapter used. Video memory and BIOS Extended BIOS data (movable by memory manager software) Extended
  • Intel BOXDP35DPM | Product Specification - Page 40
    Intel Desktop Board DP35DP Technical Product Specification 2.2 Connectors and Headers CAUTION Only the following connectors and headers have overcurrent protection: Back panel and front panel USB, with support for 1394. The other internal connectors/headers are not overcurrent protected and should
  • Intel BOXDP35DPM | Product Specification - Page 41
    2.2.1 Back Panel Connectors Figure 9 shows the location of the back panel connectors. Technical Reference Item A B C D E F G H I J K Description IEEE-1394a USB ports [2] USB ports [2] LAN USB ports [2] Surround left/right channel audio out Center channel and LFE (subwoofer) audio out Audio line
  • Intel BOXDP35DPM | Product Specification - Page 42
    Intel Desktop Board DP35DP Technical Product Specification 2.2.2 Component-side Connectors and Headers Figure 10 shows the locations of the component-side connectors and headers. Figure 10. Component-side Connectors and Headers 42
  • Intel BOXDP35DPM | Product Specification - Page 43
    Conventional bus add-in card connector I PCI Express x1 add-in card connector J PCI Express x16 add-in card connector K Processor core power connector (2 X 2) L Back panel CIR emitter (output) header M Rear chassis fan header N Processor fan header O Serial port header P Front panel
  • Intel BOXDP35DPM | Product Specification - Page 44
    Intel Desktop Board DP35DP Technical Product Specification 2.2.2.1 Signal Tables for the Connectors and Headers Table 11. HD Audio Link Header Pin Signal Name 1 BCLK 3 RST# 5 SYNC 7
  • Intel BOXDP35DPM | Product Specification - Page 45
    Technical Reference Table 15. Chassis Intrusion Header Pin Signal Name 1 Intruder 2 Ground Table 16. Front and Rear Chassis (3-Pin) Fan Headers Pin Signal Name 1 Control 2 +12 V 3 Tach Table 17. Processor and Auxiliary Rear Chassis (4-Pin) Fan Headers Pin Signal Name 1 Ground 2
  • Intel BOXDP35DPM | Product Specification - Page 46
    Intel Desktop Board DP35DP Technical Product Specification 2.2.2.2 Add-in Card Connectors The board has the following add-in card connectors: • PCI Express x16: one connector supporting simultaneous transfer speeds up to 4 GBytes/sec of peak bandwidth per direction and up to 8 GBytes/sec concurrent
  • Intel BOXDP35DPM | Product Specification - Page 47
    connector is compatible with 2 x 10 connectors previously used on Intel Desktop boards. The board supports the use of ATX12V power supplies with either 2 x 10 to do so will prevent the board from booting. Table 19. Processor Core Power Connector Pin Signal Name Pin Signal Name 1 Ground 3 +12
  • Intel BOXDP35DPM | Product Specification - Page 48
    Intel Desktop Board DP35DP Technical Product Specification 2.2.2.5 Front Panel Header This section describes the functions of the front panel header. Table 21 lists the signal names
  • Intel BOXDP35DPM | Product Specification - Page 49
    Technical Reference 2.2.2.5.1 Hard Drive Activity LED Header Pins 1 and 3 can be connected to an LED to provide a visual indicator that data is being read from or written to a hard drive. Proper LED function requires one of the following: • A Serial ATA hard drive connected to an onboard Serial
  • Intel BOXDP35DPM | Product Specification - Page 50
    Intel Desktop Board DP35DP Technical Product Specification 2.2.2.6 Front Panel USB Headers Figure 12 is a connection diagram for the front panel USB headers. # INTEGRATOR'S NOTES • The +5 V DC
  • Intel BOXDP35DPM | Product Specification - Page 51
    computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 14 shows the location of the jumper block. The jumper determines the BIOS Setup program's mode. Table 24 lists the jumper settings for the three modes: normal, configure, and recovery. When the jumper is set to
  • Intel BOXDP35DPM | Product Specification - Page 52
    Intel Desktop Board DP35DP Technical Product Specification 2.4 Mechanical Considerations 2.4.1 Form Factor The board is designed to fit into an ATX-form-factor chassis. Figure 15 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions
  • Intel BOXDP35DPM | Product Specification - Page 53
    power supply must comply with the indicated parameters of the ATX form factor specification. • The potential relation between 3.3 VDC information about Selecting an appropriate power supply Refer to http://support.intel.com/support/motherboards/desktop/sb/ CS-026472.htm 2.5.2 Fan Header Current
  • Intel BOXDP35DPM | Product Specification - Page 54
    responsibility for determining the adequacy of any thermal or system design remains solely with the reader. Intel makes no warranties or representations that merely following the instructions presented in this document will result in a system with adequate thermal performance. CAUTION Ensure that
  • Intel BOXDP35DPM | Product Specification - Page 55
    Figure 16 shows the locations of the localized high temperature zones. Item A B C D Description Processor voltage regulator area Processor Intel 82P35 MCH Intel 82801IR (ICH9R) Figure 16. Localized High Temperature Zones Table 27 provides maximum case temperatures for the board components that
  • Intel BOXDP35DPM | Product Specification - Page 56
    Intel Desktop Board DP35DP Technical Product Specification 2.7 Reliability The Mean Time Between Failures (MTBF) prediction is calculated using component and subassembly random failure rates. The calculation
  • Intel BOXDP35DPM | Product Specification - Page 57
    (SMBIOS 59 3.5 Legacy USB Support 60 3.6 BIOS Updates 60 3.7 BIOS Recovery 61 3.8 Boot Options 62 3.9 Adjusting Boot Speed 63 3.10 BIOS Security Features 64 3.1 Introduction The board uses an Intel BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be
  • Intel BOXDP35DPM | Product Specification - Page 58
    Intel Desktop Board DP35DP Technical Product Specification Table 29 lists the BIOS Setup program menu features. Table 29. BIOS Setup Program Menu Bar Maintenance Main Advanced Security Clears passwords and displays processor information Displays processor and memory configuration Configures
  • Intel BOXDP35DPM | Product Specification - Page 59
    the drive. You can override the auto-configuration options by specifying manual configuration in the BIOS Setup program. To use ATA-66/100/133 features the following items The BIOS supports an SMBIOS table interface for such operating systems. Using this support, an SMBIOS service-level application
  • Intel BOXDP35DPM | Product Specification - Page 60
    target system to prevent accidentally installing an incompatible BIOS. NOTE Review the instructions distributed with the upgrade utility before attempting a BIOS update. For information about BIOS update utilities Refer to http://support.intel.com/support/motherboards/desktop/sb/CS022312.htm. 60
  • Intel BOXDP35DPM | Product Specification - Page 61
    , for example) Yes USB diskette drive (with a 1.44 MB diskette) No USB hard disk drive No Legacy diskette drive (with a 1.44 MB diskette) connected to the No legacy diskette drive interface For information about BIOS recovery Refer to http://support.intel.com/support/motherboards/desktop 61
  • Intel BOXDP35DPM | Product Specification - Page 62
    Intel Desktop Board DP35DP Technical Product Specification 3.8 Boot Options In the BIOS Setup program, the user can choose Boot Booting from CD-ROM is supported in compliance to the El Torito bootable CD-ROM format specification. Under the Boot menu in the BIOS Setup program, ATAPI CDROM is listed
  • Intel BOXDP35DPM | Product Specification - Page 63
    with the BIOS more quickly, which enables the system to boot more quickly. 3.9.2 BIOS Boot Optimizations Use of the following BIOS Setup program the boot process to the point where the system boots so quickly that the Intel logo screen (or a custom logo splash screen) will not be seen. Monitors
  • Intel BOXDP35DPM | Product Specification - Page 64
    Intel Desktop Board DP35DP Technical Product Specification 3.10 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup program and for booting
  • Intel BOXDP35DPM | Product Specification - Page 65
    of the onboard speaker Refer to Figure 1, page 12 4.2 BIOS Beep Codes Whenever a recoverable error occurs during POST, the BIOS displays an error message describing the problem (see Table 34). Table 34. Beep Codes Type Pattern Memory error Three long beeps Thermal warning Four alternating
  • Intel BOXDP35DPM | Product Specification - Page 66
    Intel Desktop Board DP35DP Technical Product Specification 4.4 Port 80h POST Codes During the POST, the BIOS generates diagnostic by any PEIM/driver for debug. Host Processors: 1F is an unrecoverable CPU error. 20 - 2F Memory/Chipset: 2F is no memory detected or no useful memory detected. 30 -
  • Intel BOXDP35DPM | Product Specification - Page 67
    21 Initializing a chipset component Memory 22 Reading SPD from memory DIMMs 23 Detecting presence of memory DIMMs 24 Programming timing parameters in the memory controller and the DIMMs 25 Configuring memory 26 Optimizing memory settings 27 Initializing memory, such as ECC init 28
  • Intel BOXDP35DPM | Product Specification - Page 68
    Intel 95 Instructing Core E0 Started dispatching PEIMs (emitted on first report of EFI_SW_PC_INIT_BEGIN EFI_SW_PEI_PC_HANDOFF_TO_NEXT) E2 Permanent memory found E1, E3 Reserved for PEI/PEIMs DXE Core E4 Entered DXE phase E5 Started dispatching drivers E6 Started connecting drivers
  • Intel BOXDP35DPM | Product Specification - Page 69
    Code Description of POST Operation DXE Drivers E7 Waiting for user input E8 Checking password E9 Entering BIOS setup EB Calling Legacy Option service ExitBootServices ( ) has been called F9 EFI runtime service SetVirtualAddressMap ( ) has been called FA EFI runtime service ResetSystem
  • Intel BOXDP35DPM | Product Specification - Page 70
    Intel Desktop Board DP35DP Technical Product Specification Table 38. Typical Port 80h POST Sequence POST Code Description 21 Initializing a chipset component 22 Reading SPD from memory DIMMs 23 Detecting presence of memory DIMMs 25 Configuring memory 28 Testing memory Video BIOS 58
  • Intel BOXDP35DPM | Product Specification - Page 71
    5 Regulatory Compliance and Battery Disposal Information What This Chapter Contains 5.1 Regulatory Compliance 71 5.2 Battery Disposal Information 81 5.1 Regulatory Compliance This section contains the following regulatory compliance information for Desktop Board DP35DP: • Safety standards •
  • Intel BOXDP35DPM | Product Specification - Page 72
    Desktop Board DP35DP Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board DP35DP is in conformity with all applicable essential requirements necessary for CE
  • Intel BOXDP35DPM | Product Specification - Page 73
    Regulatory Compliance and Battery Disposal Information Polski Niniejszy produkt jest zgodny z postanowieniami Dyrektyw Unii Europejskiej 2004/108/EC i 73/23/EWG. Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC & 2006/95/EC. Español Este producto cumple con las normas
  • Intel BOXDP35DPM | Product Specification - Page 74
    of this program, including the scope of covered products, available locations, shipping instructions, terms and conditions, etc Intel Product Recycling Program http://www.intel.com/intel/other/ehs/product_ecology Deutsch Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das
  • Intel BOXDP35DPM | Product Specification - Page 75
    pour en savoir plus sur ce programme, à savoir les produits concernés, les adresses disponibles, les instructions d'expédition, les conditions générales, etc http://www.intel.com/in tel/other/ehs/product_ecology Malay Sebagai sebahagian daripada komitmennya terhadap tanggungjawab persekitaran
  • Intel BOXDP35DPM | Product Specification - Page 76
    Bu programın ürün kapsamı, ürün iade merkezleri, nakliye talimatları, kayıtlar ve şartlar v.s dahil bütün ayrıntılarını ögrenmek için lütfen http://www.intel.com/intel/other/ehs/product_ecology Web sayfasına gidin. 5.1.3.3 Lead Free Desktop Board This Desktop Board is a European Union Restriction of
  • Intel BOXDP35DPM | Product Specification - Page 77
    Regulatory Compliance and Battery Disposal Information Table 40 shows the various forms of the "Lead-Free 2nd Level Interconnect" mark as it appears on the board and accompanying collateral. Table 40. Lead-Free Board Markings Description Lead-Free 2nd Level Interconnect: This symbol is used to
  • Intel BOXDP35DPM | Product Specification - Page 78
    Intel Desktop Board DP35DP Technical Product Specification 5.1.4 EMC Regulations Desktop Board DP35DP complies with the EMC regulations stated in Table 41 when correctly installed in a compatible
  • Intel BOXDP35DPM | Product Specification - Page 79
    near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. Korean Class B statement translation: this is household equipment that is certified to comply with EMC requirements. You may use this
  • Intel BOXDP35DPM | Product Specification - Page 80
    MIC (Ministry of Information and Communication) mark. Includes adjacent MIC certification number: CPU-DP35DP (B) Taiwan BSMI (Bureau of Standards, Metrology and Inspections) mark. Includes adjacent Intel company number, D33025. Printed wiring board manufacturer's recognition mark. Consists of
  • Intel BOXDP35DPM | Product Specification - Page 81
    Regulatory Compliance and Battery Disposal Information 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations.
  • Intel BOXDP35DPM | Product Specification - Page 82
    Intel Desktop Board DP35DP Technical Product Specification PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del
  • Intel BOXDP35DPM | Product Specification - Page 83
    Regulatory Compliance and Battery Disposal Information AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo
  • Intel BOXDP35DPM | Product Specification - Page 84
    Intel Desktop Board DP35DP Technical Product Specification 84
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
May 2007
Order Number:
D88103-001US
The Intel
®
Desktop Board DP35DP may contain design defects or errors known as errata that may cause the product to deviate from published specifications.
Current
characterized errata are documented in the Intel Desktop Board DP35DP Specification Update.
Intel® Desktop Board
DP35DP
Technical Product Specification