Intel D910GLDW Product Specification

Intel D910GLDW Manual

Get Intel D910GLDW PDF manuals and user guides View all Intel D910GLDW manuals
Add to My Manuals
Save this manual to your list of manuals

Intel D910GLDW manual content summary:

  • Intel D910GLDW | Product Specification - Page 1
    October 2004 Order Number: C88966-002 The Intel® Desktop Board D910GLDW may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board D910GLDW Specification Update.
  • Intel D910GLDW | Product Specification - Page 2
    Intel® Desktop Board D910GLDW Technical Product October 2004 Specification. This product specification applies to only standard Intel® Desktop Board D910GLDW with BIOS identifier WB91X10J.86A. Changes to this specification will be published in the Intel Desktop Board D910GLDW Specification Update
  • Intel D910GLDW | Product Specification - Page 3
    information. It is specifically not intended for general audiences. What This Document Contains Chapter 1 2 3 4 Description A description of the hardware used on the Desktop Board D910GLDW A map of the resources of the Desktop Board The features supported by the BIOS Setup program A description
  • Intel D910GLDW | Product Specification - Page 4
    Intel Desktop Board D910GLDW Technical Product Specification Other Common Notation # (NxnX) GB GB/ component, N indicates component type, xn are the relative coordinates of its location on the Desktop Board D910GLDW, and X is the instance of the particular part at that general location. For example
  • Intel D910GLDW | Product Specification - Page 5
    23 1.9 Audio Subsystem ...24 1.9.1 Audio Subsystem Software 24 1.9.2 Audio Connectors 24 1.9.3 Intel® High Definition Audio Subsystem 25 1.10 LAN Subsystem (Optional 26 1.10.1 Intel® 82562EZ Physical Layer Interface Device 26 1.10.2 Alert Standard Format (ASF) Support 27 1.10.3 LAN Subsystem
  • Intel D910GLDW | Product Specification - Page 6
    Intel Desktop Board D910GLDW Technical Product Specification 2.5 PCI Configuration Space Map 39 2.6 Interrupts ...40 2.7 PCI Conventional 3.3.2 PCI IDE Support 66 3.4 System Management BIOS (SMBIOS 67 3.5 Legacy USB Support...67 3.6 BIOS Updates ...68 3.6.1 Language Support 68 3.6.2 Custom
  • Intel D910GLDW | Product Specification - Page 7
    Speaker ...80 4.5 BIOS Beep Codes...80 Figures 1. Board Components ...12 2. Audio Connector Options for High Definition Audio Subsystem...... 25 7. High Definition Audio Subsystem Block Diagram 25 8. LAN Board Components Shown in Figure 1 13 4. Supported Memory Configurations 16 5. LAN Connector
  • Intel D910GLDW | Product Specification - Page 8
    Intel Desktop Board D910GLDW Technical Product Specification 18. Front Chassis Fan and Rear Chassis Fan a One-Color Power LED 49 27. States for a Two-Color Power LED 49 28. BIOS Setup Configuration Jumper Settings 52 29. DC Loading Characteristics 55 30. Fan Connector Current Capability 55
  • Intel D910GLDW | Product Specification - Page 9
    23 1.9 Audio Subsystem ...24 1.10 LAN Subsystem (Optional 26 1.11 Hardware Management Subsystem 28 1.12 Power Management ...30 1.1 PCI Bus Terminology Change Previous generations of Intel® Desktop Boards used an add-in card connector referred to as PCI. This generation of Intel Desktop Boards adds
  • Intel D910GLDW | Product Specification - Page 10
    Product Specification 1.2 Overview 1.2.1 Feature Summary Table 1 summarizes the major features of the Desktop Board D910GLDW. Table 1. Feature Summary Form Factor Processor Memory microATX Form Factor (9.60 inches by 9.60 inches [243.84 millimeters by 243.84 millimeters]) Support for an Intel
  • Intel D910GLDW | Product Specification - Page 11
    Options IEEE-1394a Interface IEEE-1394a controller and two IEEE-1394a connectors LAN Support 10/100 Mbits/sec LAN subsystem using the Intel® 82562EZ Platform LAN Connect (PLC) device For information about Available configurations for the Desktop Board D910GLDW Refer to Section 1.3, page 15 11
  • Intel D910GLDW | Product Specification - Page 12
    Intel Desktop Board D910GLDW Technical Product Specification 1.2.3 Board Layout Figure 1 shows the location of the major components on the Desktop Board D910GLDW. AB C D E F DD CC G BB AA Z H I J K Y L W US X V T RQ P O NM Figure 1. Board Components Table 3 lists the components
  • Intel D910GLDW | Product Specification - Page 13
    monitoring and fan control ASIC Processor fan connector Intel 82910GL GMCH DIMM Channel A socket DIMM Channel B socket I/O controller Power connector Diskette drive connector Parallel ATE IDE connector Battery Chassis intrusion connector BIOS Setup configuration jumper block 4 Mbit Firmware Hub (FWH
  • Intel D910GLDW | Product Specification - Page 14
    Intel Desktop Board D910GLDW Technical Product Specification 1.2.4 Block Diagram Figure 2 is a block diagram of the major functional areas of the board Diskette Drive Connector DMI Interconnect High Definition Audio Link LAN Connect Interface Intel 82910GL Graphics and Memory Controller Hub (GMCH
  • Intel D910GLDW | Product Specification - Page 15
    for the Desktop Board D910GLDW Processor data sheets ICH6 addressing Custom splash screens Audio software and utilities LAN software and drivers Visit this World Wide Web site: http://www.intel.com/design/motherbd http://support.intel.com/support/motherboards/desktop http://developer.intel.com
  • Intel D910GLDW | Product Specification - Page 16
    Intel Desktop Board D910GLDW Technical Product Specification NOTE To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program
  • Intel D910GLDW | Product Specification - Page 17
    Product Description 1.5.1 Memory Configurations The Intel 82910GL GMCH supports two types of memory organization: • Dual channel (Interleaved) mode. This mode offers the highest throughput for real world applications. Dual channel mode is enabled when
  • Intel D910GLDW | Product Specification - Page 18
    Intel Desktop Board D910GLDW Technical Product Specification 1.5.1.1 Dual Channel (Interleaved) Mode Configuration Figure 4 shows a dual channel configuration using two DIMMs. In this example, the DIMM sockets of both channels are populated with
  • Intel D910GLDW | Product Specification - Page 19
    centralized controller for the board's I/O paths. The FWH provides the nonvolatile storage of the BIOS. For information about The Intel 910GL chipset Resources used by decode • Dynamic Video Memory Technology (DVMT) support up to 224 MB • Intel® Zoom Utility For information about DVMT Obtaining
  • Intel D910GLDW | Product Specification - Page 20
    Intel Desktop Board D910GLDW Technical Product Specification 1.6.1.1 Dynamic Video Memory Technology (DVMT) DVMT enables enhanced graphics and memory performance through Direct AGP, and highly efficient memory utilization. DVMT ensures the most efficient
  • Intel D910GLDW | Product Specification - Page 21
    bus supporting host and target throttling and transfer rates of up to 66 MB/sec. ATA-66 protocol is similar to Ultra DMA and is device driver compatible drive reports the transfer rate and translation mode to the BIOS. The board supports Laser Servo (LS-120) diskette technology through the Parallel
  • Intel D910GLDW | Product Specification - Page 22
    Intel Desktop Board D910GLDW Technical Product Specification NOTE Many Serial ATA drives use new low Express Connector The board provides one PCI Express x1 connector. The x1 interface supports simultaneous transfer speeds up to 500 MBytes/sec. The PCI Express interface supports the PCI Conventional
  • Intel D910GLDW | Product Specification - Page 23
    management, including a programmable wake-up event interface • PCI Conventional bus power management support The BIOS Setup program provides configuration options for the I/O controller. 1.8.1 Serial Port The board supports one serial port connector, Serial port A, located on the back panel. The
  • Intel D910GLDW | Product Specification - Page 24
    Intel Desktop Board D910GLDW Technical Product Specification 1.9 Audio Subsystem The board supports the Intel High Definition audio subsystem based on the Realtek ALC860 codec. The audio subsystem supports the following features: • Advanced jack sense (front and rear panel) that enables the audio
  • Intel D910GLDW | Product Specification - Page 25
    the following: • Intel 82801FB I/O Controller Hub (ICH6) • Realtek ALC860 audio codec • Microphone input that supports a single dynamic, condenser, or electret microphone The front and back audio connectors are configurable through the audio device drivers. The available configurable audio ports are
  • Intel D910GLDW | Product Specification - Page 26
    Intel Desktop Board D910GLDW Technical Product Specification 1.10 LAN Subsystem (Optional) The 10/100 Mbits/sec LAN subsystem consists of the following: • The Intel 82801FB ICH6 • An Intel 82562EZ Platform LAN Connect (PLC) device for 10/100 Mbits/sec Ethernet LAN connectivity • An RJ-45 LAN
  • Intel D910GLDW | Product Specification - Page 27
    Alert Standard Format (ASF) Support The boards provide the following ASF support for PCI Express x1 bus add-in LAN cards and PCI Conventional bus add-in LAN cards installed in PCI Conventional bus slot 2: • Monitoring of system firmware progress events, including: ⎯ BIOS present ⎯ Primary processor
  • Intel D910GLDW | Product Specification - Page 28
    Intel Desktop Board D910GLDW Technical Product Specification 1.11 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The Desktop Board has several hardware management features, including the following:
  • Intel D910GLDW | Product Specification - Page 29
    1.11.2 Thermal Monitoring Figure 9 shows the location of the sensors and fan connectors. Product Description 3 1 A CB 4 1 D 1 3 Item A B C D E F F E OM17312 Description Thermal diode, located on processor die Remote ambient temperature sensor Ambient temperature sensor, internal to
  • Intel D910GLDW | Product Specification - Page 30
    Intel Desktop Board D910GLDW Technical Product Specification 1.11.3 Fan Monitoring Fan monitoring can be implemented using Intel® Desktop Utilities, LANDesk* software, or thirdparty software. The level of monitoring and control is dependent on the hardware monitoring ASIC used with the Desktop
  • Intel D910GLDW | Product Specification - Page 31
    an operating system that provides full ACPI support. ACPI features include: • Plug and Play (including bus and device enumeration) • Power management control of individual devices, add-in boards (some add-in boards may require an ACPI-aware driver), video displays, and hard disk drives • Methods
  • Intel D910GLDW | Product Specification - Page 32
    Intel Desktop Board D910GLDW Technical Product Specification states supported by the board along with the associated system power targets. See the ACPI specification for Service can be performed safely. Notes: 1. Total system power is dependent on the system configuration, including add-in boards
  • Intel D910GLDW | Product Specification - Page 33
    by default in the BIOS Setup program. Setting this option to Power On will enable a wake-up event from LAN in the S5 state. NOTE The use of these wake-up events from an ACPI state requires an operating system that provides full ACPI support. In addition, software, drivers, and peripherals must
  • Intel D910GLDW | Product Specification - Page 34
    Intel Desktop Board D910GLDW Technical Product Specification system that provides full ACPI support. 1.12.2.1 Power Connector ATX12V Last Power State feature in the BIOS Setup program's Boot menu. For information 18, page 46 1.12.2.3 LAN Wake Capabilities CAUTION For LAN wake capabilities, the +5 V
  • Intel D910GLDW | Product Specification - Page 35
    Specification. Add-in boards that also support this specification can participate in power management and can be used to wake the computer. The use of Instantly Available PC technology requires operating system support and PCI 2.2 compliant add-in cards, PCI Express add-in cards, and drivers
  • Intel D910GLDW | Product Specification - Page 36
    Intel Desktop Board D910GLDW Technical Product Specification 1.12.2.8 PME# Signal Wake-up Support When the PME# signal on the PCI Conventional bus is asserted, the computer wakes from an ACPI S1, S3, S4, or S5 state (with Wake on PME enabled in BIOS). 1.12.2.9 WAKE# Signal Wake-up Support When the
  • Intel D910GLDW | Product Specification - Page 37
    K 639 K - 640 K 512 K - 639 K 0 K - 512 K A0000 - C7FFF 9FC00 - 9FFFF 80000 - 9FBFF 00000 - 7FFFF 160 KB 1 KB 127 KB 512 KB Description Extended memory Runtime BIOS Reserved Potential available high DOS memory (open to the PCI Conventional bus). Dependent on video adapter used. Video memory and
  • Intel D910GLDW | Product Specification - Page 38
    Intel Desktop Board D910GLDW Technical Product Specification 2.3 Fixed I/O Map Table 10. I/O Map Address (hex) Size Description 0000 - 00FF 0170 - 0177 01F0 - 01F7 256 bytes 8 bytes 8 bytes Used by the Desktop Board D910GLDW. Refer to the ICH6 data sheet for dynamic addressing information.
  • Intel D910GLDW | Product Specification - Page 39
    00 01 03 00 01 02 03 07 00 00 01 02 03 00 Description Memory controller of Intel 82910GL component Integrated graphics controller Integrated graphics controller Intel High Definition Audio Controller PCI Express port 1 (PCI Express x1 bus connector 1) PCI Express port 2 PCI Express port 4 (not used
  • Intel D910GLDW | Product Specification - Page 40
    Intel Desktop Board D910GLDW Technical Product Specification 2.6 Interrupts The interrupts can be routed through either the Programmable Interrupt Controller (PIC) or the Advanced Programmable Interrupt Controller (APIC) portion of the ICH6 component. The PIC is supported in Windows 98 SE and
  • Intel D910GLDW | Product Specification - Page 41
    and onboard PCI Conventional devices. The PCI Conventional specification describes how interrupts can be shared between devices attached signals. Some PCI Conventional interrupt sources are electrically tied together on the board and therefore share the same interrupt. Table 14 shows an example of
  • Intel D910GLDW | Product Specification - Page 42
    Intel Desktop Board D910GLDW Technical Product Specification 2.8 Connectors CAUTION Only the following connectors have computer, the power cable, and the external devices themselves. This section describes the board's connectors. The connectors can be divided into these groups: • Back panel I/O
  • Intel D910GLDW | Product Specification - Page 43
    power headphones or amplified speakers only. Poor audio quality occurs if passive (non-amplified) keyboard port (Purple) Parallel port (Burgundy) Serial port A (Teal) VGA port Audio line in/Retasking Port C (Light blue) Audio line out/Retasking Port D (Lime Green) Mic in/Retasking Port B (Pink)
  • Intel D910GLDW | Product Specification - Page 44
    Intel Desktop Board D910GLDW Technical Product Specification 2.8.2 Component-side Connectors Figure 12 shows the locations of the component-side connectors. AC BD E F 12 9 10 V 2 1 10 12 U 10 4 3 1 13 12 10 11 9 2 1 1 1 11 3
  • Intel D910GLDW | Product Specification - Page 45
    Table 16. Component-side Connectors Shown in Figure 12 Item/Callout from Figure 12 Description A Front panel audio connector B PCI Conventional bus add-in card connector 2 C Front panel IEEE-1394a connector (optional) D PCI Conventional bus add-in card connector 1 E Rear chassis fan
  • Intel D910GLDW | Product Specification - Page 46
    Intel Desktop Board D910GLDW Technical Product Specification Table 17. Front Panel Audio Connector Pin Signal Name 1 Port E [Port 1] Left Channel 3 2] Sense return (jack detection) # INTEGRATOR'S NOTE The front panel audio connector is colored yellow. Table 18. Front Chassis Fan and Rear
  • Intel D910GLDW | Product Specification - Page 47
    has two power supply connectors: • Main power - a 2 x 12 connector. This connector is compatible with 2 x 10 connectors previously used on Intel Desktop boards. The board supports the use of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables. When using a power supply with a 2 x 10
  • Intel D910GLDW | Product Specification - Page 48
    Intel Desktop Board D910GLDW Technical Product Specification 2.8.2.2 Add-in Card Connectors The board has the following add-in card connectors: • One PCI Express x1 connector. The x1 interface support simultaneous transfer speeds up to 500 MBytes/sec • Two PCI Conventional rev 2.2 compliant local
  • Intel D910GLDW | Product Specification - Page 49
    5 and 7 [Purple] can be connected to a momentary single pole, single throw (SPST) type switch that is normally open. When the switch is closed, the board resets and runs the POST. 2.8.2.4.3 Power/Sleep LED Connector [Green] Pins 2 and 4 [Green] can be connected to a one- or two-color LED. Table 26
  • Intel D910GLDW | Product Specification - Page 50
    Intel Desktop Board D910GLDW Technical Product Specification NOTE The colors listed in Table 26 and Table 27 are suggested colors only. Actual LED colors are product- or customer-specific. 2.8.2.4.4 Power Switch Connector [Red] Pins 6 and 8 [Red] can be connected to a front panel momentary-contact
  • Intel D910GLDW | Product Specification - Page 51
    Technical Reference 2.8.2.6 Front Panel IEEE 1394a Connectors (Optional) Figure 15 is a connection diagram for the optional IEEE 1394a connector. TPA+ 1 2 TPA− Ground TPB+ 3 4 5 6 Ground TPB− +12 V DC 7 8 +12 V DC Key (no pin) 10 Ground OM16107 Figure 15. Connection Diagram for
  • Intel D910GLDW | Product Specification - Page 52
    Intel Desktop Board D910GLDW Technical Product Specification 2.9 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 16 shows the location
  • Intel D910GLDW | Product Specification - Page 53
    . Figure 17 illustrates the mechanical form factor of the board. Dimensions are given in inches [millimeters]. The outer 243.84 millimeters]. Location of the I/O connectors and mounting holes are in compliance with the ATX specification. 6.500 [165.10] 6.100 [154.94] 1.800 [45.72] 5.200 [132
  • Intel D910GLDW | Product Specification - Page 54
    Intel Desktop Board D910GLDW Technical Product Specification 2.10.2 I/O Shield The back panel I/O shield for the board must meet specific dimension and material requirements. Systems based on this board needs the back panel I/O shield to pass certification testing. Figure 18 shows the I/O shield.
  • Intel D910GLDW | Product Specification - Page 55
    with a 500 mA current draw per USB port. These calculations are not based on specific processor values or memory configurations but are based on the minimum and maximum current draw possible from the board's power delivery subsystems to the processor, memory, and USB ports. Use the datasheets for
  • Intel D910GLDW | Product Specification - Page 56
    Intel Desktop Board D910GLDW Technical Product Specification 2.11.4 Power Supply Considerations CAUTION The +5 V standby line for supported and manufacturing options. System integrators should refer to the power usage values listed in Table 29 when selecting a power supply for use with the board.
  • Intel D910GLDW | Product Specification - Page 57
    processor and/or voltage regulator or, in some instances, damage to the board. For a list of chassis that have been tested with Intel desktop boards please refer to the following website: http://developer.intel.com/design/motherbd/cooling.htm All responsibility for determining the adequacy of any
  • Intel D910GLDW | Product Specification - Page 58
    Intel Desktop Board D910GLDW Technical Product Specification CAUTION Ensure that proper airflow is maintained in the zones. A B D C OM17318 Item A B C D Description Processor voltage regulator area Processor Intel 82910GL GMCH Intel 82801FB ICH6 Figure 20. Localized High Temperature Zones 58
  • Intel D910GLDW | Product Specification - Page 59
    airflow to cool the Desktop Board D910GLDW. Table 31. Thermal Considerations for Components Component Intel Celeron processor Intel 82910GL GMCH Intel 82801FB ICH6 Maximum Case Temperature For processor case temperature, see processor datasheets and processor specification updates 99 oC (under
  • Intel D910GLDW | Product Specification - Page 60
    Intel Desktop Board D910GLDW Technical Product Specification 2.14 Environmental Table 32 lists the environmental specifications for the board. Table 32. Environmental Specifications Parameter Temperature Non-Operating Operating Shock Unpackaged Packaged Vibration Unpackaged Packaged
  • Intel D910GLDW | Product Specification - Page 61
    and international safety and electromagnetic compatibility (EMC) regulations. 2.15.1 Safety Regulations Table 33 lists the safety regulations the Desktop Board D910GLDW complies with when correctly installed in a compatible host system. Table 33. Safety Regulations Regulation UL 60950-1:2003/ CSA
  • Intel D910GLDW | Product Specification - Page 62
    Intel Desktop Board D910GLDW Technical Product Specification 2.15.2.1 FCC Compliance Statement (USA) Product Type: D910GLDW Desktop Board This device complies and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
  • Intel D910GLDW | Product Specification - Page 63
    be regulated upon disposal: lead solder on the printed wiring board assembly. 2.15.4.2 Recycling Considerations Intel encourages its customers to recycle its products and their components (e.g., batteries, circuit boards, plastic enclosures, etc.) whenever possible. In the U.S., a list of recyclers
  • Intel D910GLDW | Product Specification - Page 64
    Intel Desktop Board D910GLDW Technical Product Specification 2.15.5 Product Certification Markings (Board Level) Table 35 lists the board's product certification markings. Table 35. Product Certification Markings Description UL joint US/Canada Recognized Component mark. Includes adjacent UL file
  • Intel D910GLDW | Product Specification - Page 65
    BIOS (SMBIOS 67 3.5 Legacy USB Support...67 3.6 BIOS Updates ...68 3.7 Boot Options ...69 3.8 Fast Booting Systems with Intel® Rapid BIOS Boot 70 3.9 BIOS Security Features 71 3.1 Introduction The board uses an Intel/AMI BIOS the Desktop Board is in configure mode. Section 2.9 on page 52 shows how to
  • Intel D910GLDW | Product Specification - Page 66
    Intel Desktop Board D910GLDW Technical Product Specification Table 36 lists the BIOS Setup program menu features. Table 36. BIOS Setup Program Menu Bar Maintenance Main Advanced Security Clears passwords and displays processor information Displays processor and memory configuration Configures
  • Intel D910GLDW | Product Specification - Page 67
    service-level application running on a non-Plug and Play operating system can obtain the SMBIOS information. 3.5 Legacy USB Support Legacy USB support enables USB devices to be used even when the operating system's USB drivers are not yet available. Legacy USB support is used to access the BIOS
  • Intel D910GLDW | Product Specification - Page 68
    Intel Desktop Board D910GLDW Technical Product Specification 5. The operating system loads. While the operating system is loading, USB keyboards and mice are recognized and may be used to configure the operating system. (Keyboards and mice are not recognized during this period if Legacy USB support
  • Intel D910GLDW | Product Specification - Page 69
    Booting from CD-ROM is supported in compliance to the El Torito bootable CD-ROM format specification. Under the Boot menu in the BIOS Setup program, ATAPI CD-ROM selected as a boot device. This selection allows booting from the onboard LAN or a network add-in card with a remote boot ROM installed.
  • Intel D910GLDW | Product Specification - Page 70
    Intel Desktop Board D910GLDW Technical Product Specification 3.8 Fast Booting Systems with Intel® Rapid BIOS Boot These factors affect system boot speed: • Selecting and configuring peripherals properly • Using an optimized BIOS, such as the Intel Rapid BIOS 3.8.1 Peripheral Selection and
  • Intel D910GLDW | Product Specification - Page 71
    Setup program. This is the user mode. • If only the supervisor password is set, pressing the key at the password prompt of the BIOS Setup program allows the user restricted access to Setup. • If both the supervisor and user passwords are set, users can enter either the supervisor password
  • Intel D910GLDW | Product Specification - Page 72
    Intel Desktop Board D910GLDW Technical Product Specification 72
  • Intel D910GLDW | Product Specification - Page 73
    73 4.2 Port 80h POST Codes 75 4.3 Bus Initialization Checkpoints 79 4.4 Speaker ...80 4.5 BIOS Beep Codes...80 4.1 BIOS Error Messages Table 40 lists the error messages and provides a brief description of each. Table 40. BIOS Error Messages Error Message GA20 Error Pri Master HDD Error Pri Slave
  • Intel D910GLDW | Product Specification - Page 74
    Intel Desktop Board D910GLDW Technical Product Specification Table 40. BIOS Error Messages (continued) Error Message size has increased since the last boot. If no memory was added there may be a problem with the system. Memory Size Changed Memory size has changed since the last boot. If
  • Intel D910GLDW | Product Specification - Page 75
    descriptions of the POST codes generated by the BIOS. Table 41 defines the uncompressed INIT code checkpoints Checksum verification starting. Keyboard controller BAT test, CPU ID saved, and going to 4 GB flat and interrupt controller. Initialize extra (Intel Recovery) Module. Initialize floppy drive.
  • Intel D910GLDW | Product Specification - Page 76
    Intel Desktop Board D910GLDW Technical Product Specification Table 43. Runtime Code Uncompressed in F000 Shadow RAM Code 03 Description of POST Operation NMI is Disabled. To check soft reset/power-on. 05 BIOS stack set. Going to disable cache if any. 06 POST code to be uncompressed. 07 CPU
  • Intel D910GLDW | Product Specification - Page 77
    . Memory testing/initialization above 1M complete. Going to save memory size information. Memory size information is saved. CPU registers are saved. Going to enter in real mode. Shutdown successful, CPU in real mode. Going to disable gate A20 line and disable parity/NMI. A20 address line, parity/NMI
  • Intel D910GLDW | Product Specification - Page 78
    Intel Desktop Board D910GLDW Technical Product Specification displayed. message displayed. PS/2 Mouse check and extended BIOS data area allocation to be done. Setup options programming after CMOS Generate MP for multiprocessor support (if present). Put CGA INT10 module (if present)
  • Intel D910GLDW | Product Specification - Page 79
    form the runtime SMBIOS image in shadow. Going to copy any code to specific area. Copying of code to specific area done. Going to give control to INT-19 boot loader. 4.3 Bus Initialization Checkpoints The system BIOS gives control to the different buses at several checkpoints to do various tasks
  • Intel D910GLDW | Product Specification - Page 80
    Intel Desktop Board D910GLDW Technical Product Specification on the board. The BIOS Beep Codes Whenever a recoverable error occurs during POST, the BIOS displays an error message describing the problem (see Table 47). The BIOS for example, a video BIOS) can also issue audible BIOS issues one short beep
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
October 2004
Order Number:
C88966-002
The Intel
®
Desktop Board D910GLDW may contain design defects or errors known as errata that may cause the product to deviate from published specifications.
Current
characterized errata are documented in the Intel Desktop Board D910GLDW Specification Update.
Intel
®
Desktop Board
D910GLDW
Technical Product Specification