Intel DCP847SKE Technical Product Specification

Intel DCP847SKE Manual

Get Intel DCP847SKE PDF manuals and user guides View all Intel DCP847SKE manuals
Add to My Manuals
Save this manual to your list of manuals

Intel DCP847SKE manual content summary:

  • Intel DCP847SKE | Technical Product Specification - Page 1
    G81548-002 The Intel Next Unit of Computing Board DCP847SKE may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Next Unit of Computing Board DCP847SKE Specification Update.
  • Intel DCP847SKE | Technical Product Specification - Page 2
    First release of the Intel® Next Unit of Computing Board DCP847SKE Technical Product Specification Specification clarification Date January 2013 January 2013 This product specification applies to only the standard Intel® Next Unit of Computing Board with BIOS identifier GKPPT10H.86A. INFORMATION
  • Intel DCP847SKE | Technical Product Specification - Page 3
    that apply to the Intel® Desktop Board DCP847SKE. Table 1. Specification Changes or Clarifications Date Type of Change Description of Changes or Clarifications January 2013 Spec Clarification Deleted the note in Section 3.8 on page 60 regarding removing power before setting or clearing
  • Intel DCP847SKE | Technical Product Specification - Page 4
    Intel Desktop Board DCP847SKE Technical Product Specification iv
  • Intel DCP847SKE | Technical Product Specification - Page 5
    Description A description of the hardware used on Intel Next Unit of Computing Board DCP847SKE A map of the resources of the Intel Next Unit of Computing Board The features supported by the BIOS Setup program A description of the BIOS error messages, beep codes, and POST codes Regulatory compliance
  • Intel DCP847SKE | Technical Product Specification - Page 6
    Intel Desktop Board DCP847SKE Technical Product Specification Other Common Notation # GB GB/s Gb/s KB Kb kb/s MB MB/s Mb Mb/s TDP xxh x.x V * per second Megabit (1,048,576 bits) Megabits per second Thermal Design Power An address or data value ending with a lowercase h indicates a hexadecimal
  • Intel DCP847SKE | Technical Product Specification - Page 7
    Board Layout (Top 13 1.1.3 Board Layout (Bottom 15 1.1.4 Block Diagram 17 1.2 Online Support 18 1.3 Processor 18 1.4 System Memory 19 1.4.1 Memory Configurations 20 1.5 Intel Monitoring 28 1.10.3 Thermal Solution 29 1.11 Power Management 30 1.11.1 ACPI 30 1.11.2 Hardware Support 32 vii
  • Intel DCP847SKE | Technical Product Specification - Page 8
    Intel Desktop Board DCP847SKE Technical Product Specification 2 Technical Reference 2.1 Memory Resources 35 2.1.1 Addressable Memory 35 2.1.2 Memory Map 37 2.2 Connectors and Headers 37 2.2.1 Back Panel Connectors 38 2.2.2 Connectors and Headers (Bottom 39 2.3 BIOS Setup Configuration Jumper
  • Intel DCP847SKE | Technical Product Specification - Page 9
    14. Board Dimensions 48 15. Localized High Temperature Zones 51 Tables 1. Feature Summary 11 2. Components Shown in Figure 1 14 3. Components Shown in Figure 2 16 4. Supported Memory Configurations 19 5. LAN Connector LED States 27 6. Effects of Pressing the Power Switch 30 7. Power States
  • Intel DCP847SKE | Technical Product Specification - Page 10
    Intel Desktop Board DCP847SKE Technical Product Specification 23. Master Key and User Hard Drive Password Functions 60 24. Supervisor and User Password Functions 61 25. Front-panel Power LED Blink Codes 63 26. BIOS Error Messages 63 27. Port 80h POST Code Ranges 64 28. Port 80h POST Codes 65
  • Intel DCP847SKE | Technical Product Specification - Page 11
    the major features of the board. Table 2. Feature Summary Form Factor Processor Memory Chipset Graphics Audio Peripheral Interfaces Expansion Capabilities BIOS 4.0 inches by 4.0 inches (101.60 millimeters by 101.60 millimeters) • Soldered-down Intel® Celeron® processor 847 with up to 17
  • Intel DCP847SKE | Technical Product Specification - Page 12
    Intel Desktop Board DCP847SKE Technical Product Specification Table 2. Feature Summary (continued) LAN Support Gigabit (10/100/1000 Mb/s) LAN subsystem using the Intel® 82579V Gigabit Ethernet Controller Hardware Monitor Subsystem Hardware monitoring subsystem, based on a Nuvoton NPCE791C
  • Intel DCP847SKE | Technical Product Specification - Page 13
    Product Description 1.1.2 Board Layout (Top) Figure 1 shows the location of the major components on the top-side of Intel Next Unit of Computing Board DCP847SKE. Figure 1. Major Board Components (Top) 13
  • Intel DCP847SKE | Technical Product Specification - Page 14
    Intel Desktop Board DCP847SKE Technical Product Specification Table 3 lists the components identified in Figure 1. Table 3. Components Shown in Figure 1 Item from Figure 1 A B Description Battery Standby power LED C Processor fan header D Onboard power button E Power LED F Hard Disk
  • Intel DCP847SKE | Technical Product Specification - Page 15
    Product Description 1.1.3 Board Layout (Bottom) Figure 2 shows the location of the major components on the bottom-side of Intel Next Unit of Computing Board DCP847SKE. Figure 2. Major Board Components (Bottom) 15
  • Intel DCP847SKE | Technical Product Specification - Page 16
    Intel Desktop Board DCP847SKE Technical Product Specification Table 4. Components Shown in Figure 2 Item from Figure 2 Description A Back panel connectors B PCI Express Full-Mini Card connector C PCI Express Half-Mini Card connector D Front panel dual-port USB 2.0 header E BIOS setup
  • Intel DCP847SKE | Technical Product Specification - Page 17
    Product Description 1.1.4 Block Diagram Figure 3 is a block diagram of the major functional areas of the board. Figure 3. Block Diagram 17
  • Intel DCP847SKE | Technical Product Specification - Page 18
    information BIOS and driver updates Tested memory Integration information http://www.intel.com/products/desktop/chipsets/index.htm http://downloadcenter.intel.com http://www.intel.com/support/motherboards/desktop/sb/CS025414.htm http://www.intel.com/support/go/buildit 1.3 Processor The board has
  • Intel DCP847SKE | Technical Product Specification - Page 19
    . • Minimum recommended total system memory: 1024 MB • Non-ECC SO-DIMMs • Serial Presence Detect • XMP profile support for voltage detection • DDR3 1333 MHz and , the board should be populated with SO-DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read
  • Intel DCP847SKE | Technical Product Specification - Page 20
    Intel Desktop Board DCP847SKE Technical Product Specification For information about... Tested Memory Refer to: http://support.intel.com/support/motherboards/desktop/sb /CS-025414.htm 1.4.1 Memory Configurations The processor supports the following types of memory organization: • Dual channel (
  • Intel DCP847SKE | Technical Product Specification - Page 21
    Product Description Figure 4 illustrates the memory channel and SO-DIMM configuration. Figure 4. Memory Channel and SO-DIMM Configuration 21
  • Intel DCP847SKE | Technical Product Specification - Page 22
    Intel Desktop Board DCP847SKE Technical Product Specification 1.5 Intel® QS77 Express Chipset Intel QS77 Express Chipset with Direct Media Interface (DMI) interconnect provides interfaces to the processor and the USB, SATA, LPC, LAN, and PCI Express interfaces. The Intel QS77 Express Chipset is a
  • Intel DCP847SKE | Technical Product Specification - Page 23
     Hardware accelerated MPEG-2, VC-1/WMV and H.264/AVC Hi-Definition video formats  Intel HD Technology with Advanced Hardware Video Transcoding  Blu-ray* S3D via HDMI 1.4a  Dynamic Video Memory Technology (DVMT) 5.0 support  Support of up to 1.7 GB Video Memory with 4 GB and above system memory
  • Intel DCP847SKE | Technical Product Specification - Page 24
    Intel Desktop Board DCP847SKE Technical Product Specification 1.6.2 USB The board supports seven USB 2.0 ports. The port arrangement is as follows: • Three front panel ports (via one dual-port internal header and one front panel connector) • Two
  • Intel DCP847SKE | Technical Product Specification - Page 25
    engine • Jumbo frame support • LAN connect interface between the PCH and the LAN controller • Power management capabilities  ACPI technology support  LAN wake capabilities • LAN subsystem software For information about LAN software and drivers Refer to http://downloadcenter.intel.com 25
  • Intel DCP847SKE | Technical Product Specification - Page 26
    Intel Desktop Board DCP847SKE Technical Product Specification 1.9.1 Intel® 82579V Gigabit Ethernet Controller The Intel 82579V Gigabit Ethernet Controller supports the following features: • 10/100/1000 BASE-T IEEE 802.3 compliant • Energy Efficient Ethernet (EEE) IEEE802.3az support (Low Power Idle
  • Intel DCP847SKE | Technical Product Specification - Page 27
    Figure 5. LAN Connector LED Locations Table 6 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 6. LAN Connector LED States LED activity is occurring. 10 Mb/s data rate is selected. 100 Mb/s data rate is selected. 1000 Mb/s data rate is selected. 27
  • Intel DCP847SKE | Technical Product Specification - Page 28
    Intel Desktop Board DCP847SKE Technical Product Specification 1.10 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including thermal and voltage
  • Intel DCP847SKE | Technical Product Specification - Page 29
    Product Description 1.10.3 Thermal Solution Figure 6 shows the location of the thermal solution and processor fan header. Item A B Description Processor fan header Thermal solution Figure 6. Thermal Solution and Fan Header 29
  • Intel DCP847SKE | Technical Product Specification - Page 30
    Intel Desktop Board DCP847SKE Technical Product Specification 1.11 Power Management Power management is implemented at several levels, including: • Software support through Advanced Configuration and Power Interface (ACPI) • Hardware support:  Power Input  Instantly Available PC technology  LAN
  • Intel DCP847SKE | Technical Product Specification - Page 31
    or external source. No power to the system. Service can be performed safely. Notes: 1. Total system power is dependent on the system configuration, including add-in boards and peripherals powered by the system chassis' power supply. 2. Dependent on the standby power consumption of wake-up devices
  • Intel DCP847SKE | Technical Product Specification - Page 32
    Intel Desktop Board DCP847SKE Technical Product Specification 1.11.1.2 Wake-up Devices and Events Table 9 lists the devices or specific events that can wake the computer from specific states. Table 9. Wake-up Devices and Events Devices/events that wake up the system... Power switch RTC alarm LAN
  • Intel DCP847SKE | Technical Product Specification - Page 33
    enables the board to enter the ACPI S3 (Suspend-toRAM) sleep-state. While in the S3 sleep-state, the computer will appear to be off (the power supply is . The use of Instantly Available PC technology requires operating system support and drivers for any installed PCI Express add-in card. 1.11.2.3
  • Intel DCP847SKE | Technical Product Specification - Page 34
    Intel Desktop Board DCP847SKE Technical Product Specification 1.11.2.7 +5 V Standby Power Indicator LED The standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 7 shows the location of the standby power LED. CAUTION If AC power has been
  • Intel DCP847SKE | Technical Product Specification - Page 35
    • BIOS/SPI Flash device (16 Mbit) • Local APIC (19 MB) • Direct Media Interface (40 MB) • PCI Express configuration space (256 MB) • PCH base address registers PCI Express ports (up to 256 MB) • Memory-mapped I/O that is dynamically allocated for PCI Express add-in cards (256 MB) The board provides
  • Intel DCP847SKE | Technical Product Specification - Page 36
    Intel Desktop Board DCP847SKE Technical Product Specification Figure 8. Detailed System Memory Address Map 36
  • Intel DCP847SKE | Technical Product Specification - Page 37
    00000 - 7FFFF Size 16382 MB 64 KB 64 KB 96 KB 160 KB 1 KB 127 KB 512 KB Description Extended memory Runtime BIOS Reserved Potential available high not use these connectors or headers to power devices external to the computer's chassis. to the board. This section describes the board's connectors and
  • Intel DCP847SKE | Technical Product Specification - Page 38
    Intel Desktop Board DCP847SKE Technical Product Specification 2.2.1 Back Panel Connectors Figure 9 shows the location of the back panel connectors for the board. Item A B C D E F Description LAN HDMI connector 2 HDMI connector 1 USB 2.0 port USB 2.0 port 19 V DC input jack Figure 9. Back Panel
  • Intel DCP847SKE | Technical Product Specification - Page 39
    Technical Reference 2.2.2 Connectors and Headers (Bottom) Figure 10 shows the locations of the connectors and headers on the bottom-side of the board. Figure 10. Connectors and Headers (Bottom) 39
  • Intel DCP847SKE | Technical Product Specification - Page 40
    Intel Desktop Board DCP847SKE Technical Product Specification Table 11 lists the connectors and headers identified in Figure 10. Table 11. Connectors B PCI Express Half-Mini Card connector C Front panel dual-port USB 2.0 header D Front panel header E Internal DC power connector 40
  • Intel DCP847SKE | Technical Product Specification - Page 41
    Technical Reference 2.2.2.1 Signal Tables for the Connectors and Headers Table 12. PCI Express Full-Mini Card Connector Pin Signal Name Additional Signal Name 1 WAKE# 2 3.3 V 3 Reserved (Extra USB) +5 V_MINI 4 GND 5 Reserved (Extra USB) CARDIN 6 1.5 V 7 CLKREQ# 8 Reserved 9
  • Intel DCP847SKE | Technical Product Specification - Page 42
    Intel Desktop Board DCP847SKE Technical Product Specification Table 12. PCI Express Full D+ 6 D+ 7 Ground 8 Ground 9 KEY (no pin) 10 No Connect 2.2.2.2 Add-in Card Connectors The board has the following add-in card connectors: • One PCI Express Half-Mini Card • One PCI Express Full-Mini
  • Intel DCP847SKE | Technical Product Specification - Page 43
    ) plug, where the inner contact is +19 (±10%) V DC and the shell is GND. The maximum current rating is 10 A. • Internal Power Supply - the board can alternatively be powered via the internal 19 V DC 1 x 2 power connector, where pin 1 is GND and pin 2 is +19 (±10%) VDC. Table 14. 19 V Internal
  • Intel DCP847SKE | Technical Product Specification - Page 44
    Intel Desktop Board DCP847SKE open. When the switch is closed, the board resets and runs the POST. 2.2.2.4.3 Power/Sleep LED Header Pins 2 and 4 can be . Table 16. States for a One-Color Power LED LED State Description Off Power off Blinking Standby Steady Normal operation NOTE The
  • Intel DCP847SKE | Technical Product Specification - Page 45
    to switch on or off. (The time requirement is due to internal debounce circuitry on the board.) At least two seconds must pass before the power supply will recognize another on/off signal. 2.2.2.5 Front Panel USB 2.0 Header Figure 12 is a connection diagram for the front panel USB 2.0 header. NOTE
  • Intel DCP847SKE | Technical Product Specification - Page 46
    Intel Desktop Board DCP847SKE Technical Product Specification 2.3 BIOS Setup Configuration Jumper CAUTION Do not move a jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 13
  • Intel DCP847SKE | Technical Product Specification - Page 47
    that this Configure mode is the only way to clear the BIOS/CMOS settings. Press F9 (restore defaults) while in Configure mode to restore the BIOS/CMOS settings to their default values. Recovery None The BIOS attempts to recover the BIOS configuration. A recovery CD or flash drive is required. 47
  • Intel DCP847SKE | Technical Product Specification - Page 48
    Intel Desktop Board DCP847SKE Technical Product Specification 2.4 Mechanical Considerations 2.4.1 Form Factor The board is designed to fit into a custom chassis. Figure 14 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 4.0
  • Intel DCP847SKE | Technical Product Specification - Page 49
    external 19 V DC jack is the primary power input connector of Intel Next Unit of Computing Board DCP847SKE. However, the board also provides an internal 1 x 2 power connector that can be used in custom-developed systems that have an internal power supply. There is no isolation circuitry between the
  • Intel DCP847SKE | Technical Product Specification - Page 50
    Intel Desktop Board DCP847SKE Technical Product Specification 2.5.2 Fan Header Current Capability Table 18 lists the current capability of the fan headers. Table 18. Fan Header Current Capability Fan Header Maximum Available Current Processor fan .1 A 2.6 Thermal Considerations CAUTION A
  • Intel DCP847SKE | Technical Product Specification - Page 51
    Technical Reference Figure 15 shows the locations of the localized high temperature zones. Item A B Description Processor voltage regulator area Thermal solution Figure 15. Localized High Temperature Zones 51
  • Intel DCP847SKE | Technical Product Specification - Page 52
    Intel Desktop Board DCP847SKE Technical Product Specification Table 19 provides maximum case temperatures for the components that are sensitive to thermal changes. The operating temperature, current load, or operating frequency could affect case temperatures. Maximum case temperatures are important
  • Intel DCP847SKE | Technical Product Specification - Page 53
    rates. The calculation is based on the Telcordia SR-332 Issue 2, Method I, Case 3, 55 ºC ambient. The MTBF prediction is used to estimate repair rates and spare parts requirements. The MTBF for the board is 90,936 hours. 2.8 Environmental Table 21 lists the environmental specifications for the
  • Intel DCP847SKE | Technical Product Specification - Page 54
    Intel Desktop Board DCP847SKE Technical Product Specification 54
  • Intel DCP847SKE | Technical Product Specification - Page 55
    board uses a Intel Visual BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the Visual BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support
  • Intel DCP847SKE | Technical Product Specification - Page 56
    Intel Desktop Board DCP847SKE Technical Product Specification 3.2 BIOS Flash Memory Organization The Serial Peripheral Interface Flash Memory (SPI Flash) includes a 64 Mb (8192 KB) flash memory device. 3.3 System Management BIOS (SMBIOS) SMBIOS is a Desktop Management Interface (DMI) compliant
  • Intel DCP847SKE | Technical Product Specification - Page 57
    an incompatible BIOS. NOTE Review the instructions distributed with the upgrade utility before attempting a BIOS update. For information about BIOS update utilities Refer to http://support.intel.com/support/motherboards/desktop/sb /CS-022312.htm 3.5.1 Language Support The BIOS Setup program
  • Intel DCP847SKE | Technical Product Specification - Page 58
    No (BIOS update file is bigger than 1.4 MB size limit) NOTE Supported file systems for BIOS recovery: • NTFS (sparse, compressed, or encrypted files are not supported) • FAT32 • FAT16 • FAT12 • ISO 9660 For information about BIOS recovery Refer to http://www.intel.com/support/motherboards/desktop
  • Intel DCP847SKE | Technical Product Specification - Page 59
    Setup program's Security menu must be set to Full. 3.7.2 Booting Without Attached Devices For use in embedded applications, the BIOS has been designed so that after passing the POST, the operating system loader is invoked even if the following devices are not present: • Video adapter •
  • Intel DCP847SKE | Technical Product Specification - Page 60
    Intel Desktop Board DCP847SKE Technical Product Specification 3.8 Hard Disk Drive Password Security Feature The Hard Disk Drive Password Security feature blocks read and write accesses to the hard disk drive until the correct password is given. Hard Disk Drive Passwords are set in BIOS SETUP and
  • Intel DCP847SKE | Technical Product Specification - Page 61
    Setup program. This is the user mode. • If only the supervisor password is set, pressing the key at the password prompt of the BIOS Setup program allows the user restricted access to Setup. • If both the supervisor and user passwords are set, users can enter either the supervisor password
  • Intel DCP847SKE | Technical Product Specification - Page 62
    Intel Desktop Board DCP847SKE Technical Product Specification 62
  • Intel DCP847SKE | Technical Product Specification - Page 63
    LED Blink Codes Whenever a recoverable error occurs during POST, the BIOS causes the board's front panel power LED to blink an error message describing the problem (see Table 26). Table 26. Front-panel Power LED Blink Codes Type Pattern BIOS update in progress Video error (Note) Off when the
  • Intel DCP847SKE | Technical Product Specification - Page 64
    Intel Desktop Board DCP847SKE Technical Product Specification 4.3 Port 80h POST Codes During the POST, the BIOS generates diagnostic 0x2F PEI phase post MRC execution 0x31 - 0x35 Recovery 0x36 - 0x3F Platform DXE driver 0x41 - 0x4F CPU Initialization (PEI, DXE, SMM) 0x50 - 0x5F I/O Buses:
  • Intel DCP847SKE | Technical Product Specification - Page 65
    from S2, S3, S4, or S5 state Security Phase (SEC) 0x08 Starting BIOS execution after CPU BIST 0x09 SPI prefetching and caching 0x0A Load BSP microcode 0x0B Initialize NEM Pass entry point of the PEI core PEI before MRC PEI Platform driver 0x11 Set bootmode, GPIO init 0x12 Early chipset
  • Intel DCP847SKE | Technical Product Specification - Page 66
    Intel Desktop Board DCP847SKE Initialization CPU PEI Phase 0x41 Begin CPU PEI Init 0x42 XMM instruction enabling 0x43 End CPU PEI Init 0x44 0x45 0x46 CPU PEI needed 0x4A Initialize strings to HII database 0x4B 0x4C Initialize MP support CPU DXE Phase End CPU DXE SMM Phase 0x4D CPU DXE
  • Intel DCP847SKE | Technical Product Specification - Page 67
    Progress Code Enumeration BDS BDS driver entry point initialize BDS service routine entry point (can be core (should not get here) Keyboard (PS/2 or USB) Resetting keyboard Disabling the keyboard Detecting the presence of the keyboard Enabling the keyboard Clearing keyboard input buffer Instructing
  • Intel DCP847SKE | Technical Product Specification - Page 68
    Intel Desktop Board DCP847SKE Technical Product Specification Table 29. Port 80h POST Codes ( Core 0xE4 0xE7 Entered DXE phase Waiting for user input BDS 0xE8 Checking password 0xE9 Entering BIOS setup 0xEB Calling Legacy Option ROMs Runtime Phase/EFI OS Boot 0xF8 EFI boot service
  • Intel DCP847SKE | Technical Product Specification - Page 69
    recovery capsule E4 Entered DXE phase 12 Starting application processor initialization 13 SMM initialization 50 Enumerating PCI buses 51 94 Clearing keyboard input buffer 95 Keyboard Self Test EB Calling Video BIOS 58 Resetting USB bus 5A Resetting PATA/SATA bus and all devices
  • Intel DCP847SKE | Technical Product Specification - Page 70
    Intel Desktop Board DCP847SKE Technical Product Specification 70
  • Intel DCP847SKE | Technical Product Specification - Page 71
    Conformity statement • Product Ecology statements • Electromagnetic Compatibility (EMC) standards • Product certification markings 5.1.1 Safety Standards Intel Next Unit of Computing Board DCP847SKE complies with the safety standards stated in Table 31 when correctly installed in a compatible host
  • Intel DCP847SKE | Technical Product Specification - Page 72
    Intel Desktop Board DCP847SKE Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the products Intel® Next Unit of Computing Board DCP847SKE is in conformity with all applicable essential
  • Intel DCP847SKE | Technical Product Specification - Page 73
    of this program, including the scope of covered products, available locations, shipping instructions, terms and conditions, etc Intel Product Recycling Program http://www.intel.com/intel/other/ehs/product_ecology Deutsch Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das
  • Intel DCP847SKE | Technical Product Specification - Page 74
    Intel Desktop Board DCP847SKE Technical Product Specification Español Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel devuelvan los productos usados en
  • Intel DCP847SKE | Technical Product Specification - Page 75
    ı, kayıtlar ve şartlar v.s dahil bütün ayrıntılarını ögrenmek için lütfen http://www.intel.com/intel/other/ehs/product_ecology Web sayfasına gidin. 5.1.4 EMC Regulations Intel Next Unit of Computing Board DCP847SKE complies with the EMC regulations stated in Table 32 when correctly installed in
  • Intel DCP847SKE | Technical Product Specification - Page 76
    Intel Desktop Board DCP847SKE not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However changes or modifications to the equipment not expressly approved by Intel Corporation could void the user's authority to operate the equipment.
  • Intel DCP847SKE | Technical Product Specification - Page 77
    or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. Korea Class B Statement Korea Class B Statement translation: This equipment is for home use, and has acquired electromagnetic conformity registration
  • Intel DCP847SKE | Technical Product Specification - Page 78
    agencies in the definition of new requirements. Intel Next Unit of Computing Board DCP847SKE meets the following program requirements in an adequate system configuration, including appropriate selection of an efficient power supply: • Energy Star v5.2, category B • EPEAT* • Korea e-Standby
  • Intel DCP847SKE | Technical Product Specification - Page 79
    Regulatory Compliance and Battery Disposal Information 5.1.6 Regulatory Compliance Marks (Board Level) Intel Next Unit of Computing Board DCP847SKE has the regulatory compliance marks shown in Table 33. Table 33. Regulatory Compliance Marks Description UL joint US/Canada Recognized Component mark.
  • Intel DCP847SKE | Technical Product Specification - Page 80
    Intel Desktop Board DCP847SKE Technical Product Specification 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible.
  • Intel DCP847SKE | Technical Product Specification - Page 81
    Regulatory Compliance and Battery Disposal Information PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las
  • Intel DCP847SKE | Technical Product Specification - Page 82
    Intel Desktop Board DCP847SKE Technical Product Specification AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah
  • Intel DCP847SKE | Technical Product Specification - Page 83
    Regulatory Compliance and Battery Disposal Information 83
  • Intel DCP847SKE | Technical Product Specification - Page 84
    Intel Desktop Board DCP847SKE Technical Product Specification 84
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Intel® Next Unit of Computing
Board DCP847SKE
Technical Product Specification
January 2013
Order Number:
G81548-002
The Intel Next Unit of Computing Board DCP847SKE may contain design defects or errors known as errata that may cause the product to deviate from
published specifications.
Current characterized errata are documented in the Intel Next Unit of Computing Board DCP847SKE Specification Update.