Intel MFS5520VIR Specification Update

Intel MFS5520VIR Manual

Get Intel MFS5520VIR PDF manuals and user guides View all Intel MFS5520VIR manuals
Add to My Manuals
Save this manual to your list of manuals

Intel MFS5520VIR manual content summary:

  • Intel MFS5520VIR | Specification Update - Page 1
    Intel® Modular Server System Service Guide A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/Products Intel Order Number E70616-004
  • Intel MFS5520VIR | Specification Update - Page 2
    and operating parameters to determine the amount of airflow required for their specific application and environmental conditions. Intel Corporation can not be held responsible if components fail or the server board does not operate correctly when used outside any of their published operating
  • Intel MFS5520VIR | Specification Update - Page 3
    solutions for problems like no video display, no available storage, network problems, and several other possible issues. The back of this manual provides technical specifications, regulatory information, 'getting help' information, and the warranty. Intel® Modular Server System Service Guide iii
  • Intel MFS5520VIR | Specification Update - Page 4
    iv Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 5
    las declaraciones de seguridad y precaución de este documento antes de realizar cualquiera de las instrucciones. Vea Intel® Server Boards and Server Chassis Safety Information en: http://support.intel.com/support/motherboards/server/sb/cs-010770.htm Intel® Modular Server System Service Guide v
  • Intel MFS5520VIR | Specification Update - Page 6
    contacts inside the jumper, causing intermittent problems with the function controlled by that compute module should not be inserted into the chassis with the cover removed; operating it without the enclosure cover in place can damage system parts. vi Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 7
    Management Module 21 Installing and Removing an Ethernet Switch Module 23 Installing an Ethernet Switch Module 23 Removing an Ethernet Switch Module 24 Installing and Removing a Storage Control Module 26 Installing a Storage Control Module 26 Intel® Modular Server System Service Guide vii
  • Intel MFS5520VIR | Specification Update - Page 8
    Server Control User Interface 69 Introduction ...69 System Configuration Requirements 70 Setting Up a Remote Connection 71 Remote Client System Requirements 72 Log in to the Intel® Modular Server Control 72 Layout and Key Navigation Features 74 viii Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 9
    from the Intel® Modular Server Control 150 Troubleshooting ...151 First Steps Checklist ...151 Specific Issues and Corrective Actions 151 Chassis Fan Module Not Functioning 152 Cannot Connect to the Management Module 152 Cannot Connect to a Compute Module 152 Cannot Connect a Compute Module to
  • Intel MFS5520VIR | Specification Update - Page 10
    Assembly Safety Instructions 171 English ...171 Deutsch ...173 Français ...176 Español ...178 Italiano ...180 C Safety Information 183 English ...183 Server Safety Information Advertencias el acceso al sistema 203 Descarga electrostática (ESD 204 x Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 11
    a Drive Carrier 51 Figure 39. Installing an Intel® Compute Module 52 Figure 40. Removing an Intel® Compute Module 53 Figure 41. Removing the 2.5-inch Hard Disk Drive Bay Module 55 Figure 42. Installing the 2.5-inch Hard Disk Drive Bay Module 56 Intel® Modular Server System Service Guide xi
  • Intel MFS5520VIR | Specification Update - Page 12
    Configuration 133 Figure 85. Calendar ...134 Figure 86. SNMP Options ...136 Figure 87. SNMP V3 ...137 Figure 88. Reset SNMP v3 ...138 Figure 89. Settings - User Account Configuration Screen 139 xii Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 13
    Figure 96. Settings - Feature Activation 146 Figure 97. Settings - Firmware Update Screen 147 Figure 98. Settings - Restore System Settings 148 Figure 99. Online Help ...150 Intel® Modular Server System Service Guide xiii
  • Intel MFS5520VIR | Specification Update - Page 14
    xiv Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 15
    115 Table 27. Health Icons ...117 Table 28. Management Module Action Menu 117 Table 29. Management Module Tabs 118 Table 30. Health Icons ...119 Table 31. Fans and Power Supplies Tabs 119 Table 32. Diagnostic LEDs...154 Table 33. NIC LEDs ...155 Intel® Modular Server System Service Guide xv
  • Intel MFS5520VIR | Specification Update - Page 16
    xvi Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 17
    list, and diagrams showing the location of important components and connections on the server chassis. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 I/O 2 1 2 ID 1 2 3 4 5 1 I/O 2 1 2 ID 6 Figure 1. Intel® Modular Server System MFSYS25 AF002423 Intel® Modular Server System Service Guide 1
  • Intel MFS5520VIR | Specification Update - Page 18
    1 I/O 2 1 2 ID 1 I/O 2 1 2 ID Figure 2. Intel® Modular Server System MFSYS35 AF002661 Modular Server System Feature Overview Table 1 provides an overview of the modular server system configuration. 2 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 19
    System MFSYS25 ships with the following items: Table 2. Intel® Modular Server System MFSYS25 Contents Quantity One One One One Description Chassis enclosure Intel® Management Module Intel® Gigabit Ethernet Switch Module Intel® Storage Control Module Intel® Modular Server System Service Guide 3
  • Intel MFS5520VIR | Specification Update - Page 20
    panels) Blank filler panels for rear module bays SCM2 and SWM2 Documentation package including: System Quick Start Guide, Safety Flyer and Resource CD Note: The MFSYS25V2 base configuration does not include hard drives, compute modules or power cords. 4 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 21
    panels) Blank filler panels for rear module bays SCM2 and SWM2 Documentation package including: System Quick Start Guide, Safety Flyer and Resource CD Note: The MFSYS35 base configuration does not include hard drives, compute modules or power cords. Intel® Modular Server System Service Guide 5
  • Intel MFS5520VIR | Specification Update - Page 22
    /server/mfs5000si Intel® Compute Module MFS5520VI Technical Product Specification Available at: http://www.intel.com/p/en_US/support/highlights/server/mfs5520vi Intel® Compute Module MFS5520VI User Guide Available at: http://www.intel.com/p/en_US/support/highlights/server/mfs5520vi Intel® Modular
  • Intel MFS5520VIR | Specification Update - Page 23
    web page. Intel® Modular Server Control UI: The Intel® Management Module integrated management interface for the modular server system. For instructions and information, refer to the Intel® Modular Server System User Guide. Available at: http://www.intel.com/p/en_US/support/highlights/server/mfsys25
  • Intel MFS5520VIR | Specification Update - Page 24
    bottom] B Hard Disk Drive bay module with hot-swap 2.5-inch SAS hard disk drives (14) [HDD 1 on the upper left and HDD 14 on the lower right] C I/O cooling module D System Status LED Figure 3. Front View of Intel® Modular Server System MFSYS25 8 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 25
    features: • Processor(s) • Memory • Integrated Baseboard Management Controller • Network interface • Storage control module For more information, refer to the appropriate compute module Technical Product Specification and User Guide. Hard Disk Drive Bay Module The Intel® Modular Server System has
  • Intel MFS5520VIR | Specification Update - Page 26
    are supported via the Intel® Modular Server Control UI. To access the installed physical drives, you must install at least one Intel® Storage Control Module in the rear bay labeled SCM1. Because hard disk drives have different cooling, power, and vibration characteristics, Intel validates specific
  • Intel MFS5520VIR | Specification Update - Page 27
    power supply includes two fans that provide cooling for hot-swap disk drives. All four power supply bays must be populated with either a power supply module or a power supply blank. The power supply blank has two fans that ensure proper system cooling. Intel® Modular Server System Service Guide 11
  • Intel MFS5520VIR | Specification Update - Page 28
    Modules Two hot-swap main cooling modules are installed on the left rear of the chassis. Each module contains a redundant fan. Main cooling modules maintain separate zones in the chassis. Both modules are required to properly cool all compute modules. 12 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 29
    B Hard drive fault LED - Amber I/O Cooling Module C I/O cooling module power LED - Green D I/O cooling module fault LED - Amber Chassis E System Fault LED - Amber Figure 6. Intel® Modular Server System MFSYS25 Front Chassis Connectors and Indicators Intel® Modular Server System Service Guide 13
  • Intel MFS5520VIR | Specification Update - Page 30
    MFSYS35 Front Chassis Connectors and Indicators Compute Module Connectors and Indicators For detailed information on compute module connectors and indicators, refer to the appropriate compute module Technical Product Specification and User Guide. 14 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 31
    Module I Power supply module power LED - Green J Power supply fault indicator LED - Amber Main Cooling Module N Main cooling module fault LED - Amber O Main cooling module power LED - Green Figure 8. Rear Chassis Connectors and Indicators AF002065 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 32
    All indicator modes are described in "Diagnostic LED Information" on page 153. Rack Mount Options Your Intel® Modular Server System can be mounted into a 4-post fixed mount rack. 16 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 33
    the system, DO NOT lift by the power supply or fan module handles. • All compute modules, hard drives, power supply modules, I/O modules, and cooling modules should be removed before placing the Intel® Modular Server System MFSYS25/MFSYS35 in a rack. Intel® Modular Server System Service Guide 17
  • Intel MFS5520VIR | Specification Update - Page 34
    support all devices intended to be installed in the rack. Installing Temporary Handles on System Temporary handles are provided with your Intel® Modular Server installation of the remaining modules in the system, or installation of the system in a rack. 18 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 35
    and hot-plug components must be replaced within two minutes. Compute modules, management modules, switch modules, storage control modules, power modules, and cooling modules should be replaced with a like component or a filler panel within two minutes. Intel® Modular Server System Service Guide 19
  • Intel MFS5520VIR | Specification Update - Page 36
    the retention latch (see letter "A" in Figure 10) to release the retention lever. 4. Rotate the lever out and away from the module bay (see letter "B" in Figure 10) and pull the module straight out the back of the chassis (see letter "C" in Figure 10). 20 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 37
    the Management Module To install the management module, follow these steps: 1. Review the safety and ESD information at the beginning of this manual and in the appendices. 2. Locate the management module bay and remove the module to be replaced. Intel® Modular Server System Service Guide 21
  • Intel MFS5520VIR | Specification Update - Page 38
    of the retention lever engages with the module bay. B A AF002414 Figure 11. Installing the Management Module 5. Rotate the lever handle in toward the module bay until it is latched. 6. Reconnect the Ethernet management port to the management network. 22 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 39
    and rotate the module retention lever out and away from the switch module (see letter "A" in Figure 12). 4. Slide the switch module into the selected module bay (see letter "B" in Figure 12) until the bottom of the retention lever engages the bay. Intel® Modular Server System Service Guide 23
  • Intel MFS5520VIR | Specification Update - Page 40
    the retention latch (see letter "A" in Figure 13) to release the retention lever. 4. Rotate the lever out and away from the module bay (see letter "B" in Figure 13) and pull the module straight out the back of the chassis (see letter "C" in Figure 13). 24 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 41
    C A B AF002413 Figure 13. Removing an Ethernet Switch Module 5. Install a filler panel or another Ethernet switch module in the switch module bay within two minutes. Intel® Modular Server System Service Guide 25
  • Intel MFS5520VIR | Specification Update - Page 42
    lever out and away from the storage control module (see letter "A" in Figure 14). 4. Slide the storage control module into the selected module bay (see letter "B" in Figure 14) until the bottom of the retention lever engages with the module bay. 26 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 43
    Modular Server System, power off all compute modules prior to removing the Intel® Storage Control Module To remove a storage control module, follow these steps: 1. Review the safety and ESD information at the beginning of this manual and in the appendices. Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 44
    with a filler panel or another storage control module within two minutes. C A B AF002430 Figure 15. Removing a Storage Control Module 4. Install a filler panel or another storage control module in the storage control module bay within two minutes. 28 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 45
    (see letter "A" in Figure 16). B C A AF002563 Figure 16. Removing Top Cover from Storage Control Module 5. Slide the cover towards the rear of the storage control module (see letter "B" in Figure 16) and lift upward (see letter "C" in Figure 16). Intel® Modular Server System Service Guide 29
  • Intel MFS5520VIR | Specification Update - Page 46
    . 2. Remove the storage control module from the system. For instructions, see "Removing a Storage Control Module" on page 27. Warning: You must replace the storage control module with a filler panel or another storage control module within two minutes. 30 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 47
    module (see letter "A" in Figure 18). B C A AF002563 Figure 18. Removing Top Cover from Storage Control Module 5. Slide the cover towards rear of the storage control module (see letter "B" in Figure 18) and lift upward (see letter "C" in Figure 18). Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 48
    of installed compute modules increases. Note: One power supply module supports one compute module plus all other modules in the system. Two power supply modules support two to three compute modules (in any slot) plus all other modules in the system. 32 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 49
    a filler module, press the retention lever latch (see letter "A" in Figure 20) to release the filler module from the module bay. Slide the filler module out of the bay (see letter "B" in Figure 20). B A AF002420 Figure 20. Removing Filler Module Intel® Modular Server System Service Guide 33
  • Intel MFS5520VIR | Specification Update - Page 50
    , follow these steps: 1. Review the safety and ESD information at the beginning of this manual and in the appendices. 2. Locate the power supply module to be removed. 3. Remove the power cord from both the power supply module and the power source. 34 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 51
    module within two minutes. Replacing a Main Cooling Module The Intel® Modular Server System MFSYS25/MFSYS35 ships with two main cooling modules pre-installed at the back of the chassis. For the exact location of the Main Cooling Modules, see Figure 5. Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 52
    letter "B" in Figure 23). Warning: Replace the cooling module with another cooling module within two minutes. B A AF002438 Figure 23. Removing a Main Cooling Module 5. Install another cooling module into the cooling module bay within two minutes. 36 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 53
    24. Installing a Main Cooling Module Replacing the I/O Cooling Module The Intel® Modular Server System MFSYS25/MFSYS35 ships with one I/O cooling module pre-installed at the front of the chassis. For the exact location of the I/O Cooling Module in Intel® Modular Server System Service Guide 37
  • Intel MFS5520VIR | Specification Update - Page 54
    I/O cooling module out of the module bay (see letter "B" in Figure 26). 1 2 3 4 5 6 7 8 9 10 11 12 13 14 B A AF003160 Figure 25. Removing an I/O Cooling Module 5. Install another cooling module into the cooling module bay within two minutes. 38 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 55
    Installing and Removing Hard Drives The Intel® Modular Server System MFSYS25/MFSYS35 provides storage for installed compute modules by way of an on-board storage bay combined with a storage management module. The on-board storage bay supports the installation of up to 14 hotswap 2.5-inch SAS hard
  • Intel MFS5520VIR | Specification Update - Page 56
    letter "B" in Figure 27). A B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 AF002425 Figure 27. Removing a 2.5-inch Drive Carrier from a Drive Bay Module 3. With a Phillips* screwdriver, remove the four screws securing the filler panel to the drive carrier. 40 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 57
    drive carrier using the four screws removed in the previous step (see letter "B" in Figure 28). A B AF002428 Figure 28. Installing Hard Drive into Drive Carrier Intel® Modular Server System Service Guide 41
  • Intel MFS5520VIR | Specification Update - Page 58
    5. For 2.5" SSD and SATA hard drives, attach the AXXTM3SATA (SATA to SAS Converter Board) to the drive. See the below figure. Figure 29. Attaching AXXTM3SATA to the Drive 42 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 59
    the safety and ESD information at the beginning of this manual and in the appendices. 2. To avoid data corruption, ensure that the drive you intend to remove is not online and actively providing data storage to any of the installed compute modules. Intel® Modular Server System Service Guide 43
  • Intel MFS5520VIR | Specification Update - Page 60
    bay module (see letter "A" in Figure 31). Remove the drive carrier from the drive bay module (see letter "B" in Figure 31). A B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 AF002425 Figure 31. Removing a 2.5-inch Drive Carrier from the Drive Bay Module 44 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 61
    letter "B" in Figure 32) and store the hard drive in an anti-static container or bag. B A AF002429 Figure 32. Removing Hard Drive from a Drive Carrier Intel® Modular Server System Service Guide 45
  • Intel MFS5520VIR | Specification Update - Page 62
    in the drive carrier. 7. Install the drive carrier into the empty drive bay module within two minutes; this step is required to maintain proper airflow throughout the chassis and ESD information at the beginning of this manual and in the appendices. 46 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 63
    from the drive bay module (see letter "B" in Figure 34). B A AF002662 Figure 34. Removing a 3.5-inch Drive Carrier from the Drive Bay Module 3. With a Phillips* screwdriver, remove the four screws securing the filler panel to the drive carrier. Intel® Modular Server System Service Guide 47
  • Intel MFS5520VIR | Specification Update - Page 64
    carrier using the four screws removed in the previous step (see letter "B" in Figure 35). A B AF00317 Figure 35. Installing Hard Drive into Drive Carrier 48 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 65
    the safety and ESD information at the beginning of this manual and in the appendices. 2. To avoid data corruption, ensure that the drive you intend to remove is not online and actively providing data storage to any of the installed compute modules. Intel® Modular Server System Service Guide 49
  • Intel MFS5520VIR | Specification Update - Page 66
    to release the drive carrier from the drive bay module (see letter "A" in Figure 37). Remove the drive carrier from the drive bay module (see letter "B" in Figure 37). B A AF002662 Figure 37. Removing a 3.5-inch Drive Carrier from the Drive Bay Module 50 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 67
    hot-swap hard drive or a filler blank in the drive carrier. 6. Install the drive carrier into the empty drive bay module within two minutes; this step is required to maintain proper airflow throughout the chassis and to ensure proper system cooling. Intel® Modular Server System Service Guide 51
  • Intel MFS5520VIR | Specification Update - Page 68
    (see letter "B" in Figure 39). 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 I/O 2 1 2 ID 1 2 3 4 B 5 6 A 1 I/O 2 1 2 ID A Figure 39. Installing an Intel® Compute Module 4. Close the release handles on the front of the compute module. AF002431 52 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 69
    AF002432 Figure 40. Removing an Intel® Compute Module 4. Place either a filler or another compute module in the bay within two minutes. This step is required to maintain proper airflow throughout the server system and to ensure proper system cooling. Intel® Modular Server System Service Guide 53
  • Intel MFS5520VIR | Specification Update - Page 70
    storage to any of the installed compute modules. 3. Power down all installed compute modules. 4. Power down the Intel® Modular Server System MFSYS25/MFSYS35 by unplugging power cords to all installed power supplies. 5. Remove the I/O Cooling Module. For instructions, see "Removing the I/O Cooling
  • Intel MFS5520VIR | Specification Update - Page 71
    this manual and in the appendices. 2. Gently slide the HDD bay module Module bezel (see letter "B" in Figure 42) and secure it with eight screws taking care not to fully tighten the screws until all eight screws are in place (see letter "C" in Figure 42). Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 72
    Bay Module. For information about choosing the appropriate cooling module, refer to the Intel® Modular Server Spare/Parts List and Configuration Guide. For instructions on installing the I/O Cooling module, see "Installing the I/O Cooling Module" on page 39. 56 Intel® Modular Server System Service
  • Intel MFS5520VIR | Specification Update - Page 73
    storage to any of the installed compute modules. 3. Power down all installed compute modules. 4. Power down the Intel® Modular Server System MFSYS25/MFSYS35 by unplugging power cords to all installed power supplies. 5. Remove the I/O Cooling Module. For instructions, see "Removing the I/O Cooling
  • Intel MFS5520VIR | Specification Update - Page 74
    . 2. Gently slide the HDD bay module into the chassis ensuring that the bay is straight and level (see letter "A" in Figure 44). There will be some slight resistance before the bay is fully seated as the bay is inserted into the midplane connectors. 58 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 75
    3. Install the HDD Bay Module bezel (see letter "B" in Figure 44) and secure with eight screws taking care not to fully tighten Do not over tighten the screws holding the bezel. A B C AF0031 Figure 44. Installing the 3.5-inch Hard Disk Drive Bay Module Intel® Modular Server System Service Guide 59
  • Intel MFS5520VIR | Specification Update - Page 76
    filler panels. For instructions, see "Removing a Storage Control Module" on page 27. 11. Remove the Ethernet Switch Module(s) and/or filler panels. For instructions, see "Removing an Ethernet Switch Module" on page 24. 12. Remove the Management Module. 60 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 77
    the chassis (see letter "B" in Figure 45). A B 1 I/O 2 1 2 ID 1 I/O 2 1 2 ID AF003176 Figure 45. Removing the Rear Module Cage 16. From the rear of the chassis, remove the 12 screws holding the midplane in place (see letter "A" in Figure 46). Intel® Modular Server System Service Guide 61
  • Intel MFS5520VIR | Specification Update - Page 78
    towards the rear of the chassis so that it is at an angle to allow removal from the chassis. Figure 46. Removing the Midplane 62 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 79
    , follow these steps: 1. Review the safety and ESD information at the beginning of this manual and in the appendices. 2. From the rear of the chassis, gently insert the midplane ; do not overtighten. B A Figure 47. Installing the Midplane AF003179 Intel® Modular Server System Service Guide 63
  • Intel MFS5520VIR | Specification Update - Page 80
    . For instructions, see "Installing an Ethernet Switch Module" on page 23. 9. Install the Storage Control Module(s) and/or filler panels. For instructions, see "Installing a Storage Control Module" on page 26. 10. Install the Main Cooling Modules. 64 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 81
    panels. For instructions, see "Installing an Intel® Compute Module" on page 52. 15. Power up the Intel® Modular Server System MFSYS25/MFSYS35 by connecting power cords to all installed power supplies and connecting to an appropriate power source. Intel® Modular Server System Service Guide 65
  • Intel MFS5520VIR | Specification Update - Page 82
    66 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 83
    appropriate compute module Technical Product Specification and User Guide . Installing an Operating System Before installing an operating system, you must first configure storage and networking via the management module's graphical user interface (GUI). Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 84
    MFSYS25/MFSYS35, you must first properly power down all compute modules. Next, disconnect all power cables from the power source. For more information on powering down the compute module(s), refer to the Intel® Compute Module MFS50000SI User Guide. 68 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 85
    SNMP v2 and v3 support, refer to the installed Unified Firmware Update (UFU) Release Notes. This section covers the Intel® Modular Server Control UI features and provides detailed instructions for configuring the modular server system. Introduction The Intel® Management Module provides a simple and
  • Intel MFS5520VIR | Specification Update - Page 86
    the management module. - Configure alert notification destinations and policies - Manage Intel® Modular Server Control user accounts - Update system firmware System Configuration Requirements This section provides an overview of the modular server system configuration requirements. Specifically, you
  • Intel MFS5520VIR | Specification Update - Page 87
    using two Ethernet cables, as illustrated in the following image. Switch AF002069 Option 2: Connect the client system directly to the Intel® Management Module using a cross-over cable, as illustrated in the following image. Cross-over Cable AF002068 Intel® Modular Server System Service Guide 71
  • Intel MFS5520VIR | Specification Update - Page 88
    is enabled for the system. This default administrator account provides access to all available management configuration settings and actions. User Account information: - Username: admin - Password: admin Note: Username and password are case sensitive. 72 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 89
    A B C AF002066 A Enter Management Module IP Address, 192.168.150.150 B Enter Default Username (admin) C Enter Default Password (admin) Figure 49. Intel® Modular Server Control Login Intel® Modular Server System Service Guide 73
  • Intel MFS5520VIR | Specification Update - Page 90
    Layout and Key Navigation Features The Intel® Modular Server Control interface simplifies system configuration and management through use of . Top Menu Left Navigation Main Body AF002459 Figure 50. Intel® Modular Server Control General Layout 74 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 91
    Figure 7 illustrates the layout and types of information presented on the system configuration screens. QR G D ABC I E O P F J N S L K H M AF002067 Figure 51. Intel® Modular Server Control Configuration Screen Layout Intel® Modular Server System Service Guide 75
  • Intel MFS5520VIR | Specification Update - Page 92
    user. Ends current session and returns to Login screen. Intel® Modular Server Control UI Help Quickly switches between key sections of the Intel® Modular Server component. For more information, see "Intel® Gigabit Ethernet Switch Module 1 and 2" on page 104. Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 93
    summary information. R Global Hot Spare Icon - indicates hard drives that have been designated as global hot spares. Hover over icon to view component summary information. S Server is powered off. Ready for Transport Intel® Modular Server System Service Guide 77
  • Intel MFS5520VIR | Specification Update - Page 94
    Front view provides an accurate visual view of the front of the chassis, which includes all compute modules, hard drives and the I/O fan. This real-time view enables an IT administrator to select chassis in this view. Figure 52. Chassis Front View 78 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 95
    selected compute module highlighted in green. The current health and product summary information is quickly available by moving the mouse over the Health/Information icon located on the selected compute module. Figure 53. Intel® Compute Module View Intel® Modular Server System Service Guide 79
  • Intel MFS5520VIR | Specification Update - Page 96
    Firmware update or other background activity Intel® Compute Module Actions The actions available for a selected server are displayed to the right of ) Table 9. Server Action Menu Description Allows the user to remotely power on the selected server. 80 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 97
    of action first (power on, power off, reset). Then select the servers to apply the action. CAUTION: To avoid potential data loss when selecting power off the Graceful Shutdown option is recommended to shut down applications and the operating system. Intel® Modular Server System Service Guide 81
  • Intel MFS5520VIR | Specification Update - Page 98
    network or performance problems on the client computer. b. Select Mouse Mode. Choose Absolute if the remote server is running the Microsoft Windows* operating system. Choose Relative if the remote server is running the Linux* operating system. 82 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 99
    to open the KVM session in a new window. The following KVM window is displayed. Figure 54. Server Action - Remote KVM & CD 7. Select Start Redirection from the Redirection menu. If the option is 's CD-ROM drive and select CD from the Devices menu. Intel® Modular Server System Service Guide 83
  • Intel MFS5520VIR | Specification Update - Page 100
    The Intel® Modular Server System MFSYS25 supports up to 14 2.5-inch SAS drives and the Intel® Modular Server System MFSYS35 supports up to six 3.5-inch SAS/SATA drives. These drives are shared between all compute modules. The physical disk drives are not directly connected to the compute modules. To
  • Intel MFS5520VIR | Specification Update - Page 101
    Box 3. Enter a name or label for the storage pool. 4. Select the physical hard drives that are to be grouped together to create a single storage pool. Intel® Modular Server System Service Guide 85
  • Intel MFS5520VIR | Specification Update - Page 102
    for the storage pool. In Figure 57, four hard drives are selected. The RAID levels supported by grouping hard drives 1, 2, 3, and 4 together as a single storage pool are: a single storage pool to support many virtual drives with different RAID levels. 86 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 103
    storage pool. Current health and product summary is quickly available by moving the mouse over the Health/Information icon located on the selected storage pool. Intel® Modular Server System Service Guide 87
  • Intel MFS5520VIR | Specification Update - Page 104
    " on page 122.) Warning (For details, see the Event Log. For information about accessing the Event Log, see "Events" on page 122.) Information OK 88 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 105
    an existing storage pool. A dialog box will be displayed prompting the user for the new storage pool name. Deletes an existing storage pool. This a name, RAID level, size and server. Once a virtual drive is created, an operating system can be installed. Intel® Modular Server System Service Guide 89
  • Intel MFS5520VIR | Specification Update - Page 106
    Item Description Expand Storage Pool Prepare for Transport Accept Incomplete State Start Rebuild Allows the user to add one or more physical drives to an existing storage pool to increase description of these tabs, refer to the following table. 90 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 107
    virtual drive will be indistinguishable from the local physical drive on the server (if installed). • If the Intel® Shared LUN feature is activated and the operating system supports sharing LUNs, a virtual drive can be assigned to two or more servers. Intel® Modular Server System Service Guide 91
  • Intel MFS5520VIR | Specification Update - Page 108
    module for the virtual drive. 8. Assign or map the virtual drive to a server. A virtual drive can be assigned to any of the six server slots. A server does not have to be present in the Intel® Modular Server System MFSYS25/MFSYS35 for selection. 92 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 109
    the check box is selected, the Intel® Shared LUN feature allows a virtual drive to be assigned to two or more servers. This feature requires operating system support for sharing LUNs. 9. Select the of the component when the component is selected. Intel® Modular Server System Service Guide 93
  • Intel MFS5520VIR | Specification Update - Page 110
    array is available but has lost one or more disks. The virtual drive will be rebuilt automatically if a global or dedicated spare is available. 94 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 111
    handled by the multipath driver on the host operating system. Virtual Drive Details The tabs displayed below the system graphic provide detailed information on the selected virtual drive. For a description of these tabs, refer to the following table. Intel® Modular Server System Service Guide 95
  • Intel MFS5520VIR | Specification Update - Page 112
    system boots, all five virtual drives will be available for use. To assign a virtual drive to a server, follow these steps: 1. From the Storage view, select a virtual drive. 2. Choose Assign from the action menu. The following dialog box appears. 96 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 113
    virtual drive. It is recommended to power off the compute module before reassigning virtual drives to another compute module. However, it is safe to make new assignments to compute modules regardless of whether the compute module is powered on or off. Intel® Modular Server System Service Guide 97
  • Intel MFS5520VIR | Specification Update - Page 114
    the Storage screen after a virtual drive has been deleted from a storage pool that contained more than three virtual drives. Figure 62. Deleted Virtual Drive 98 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 115
    that are then assigned to individual servers. To view current status, available actions and product details for all installed hard drives, select a specific hard drive from the system graphic for the assigned storage pool. Figure 63. Physical Drives Intel® Modular Server System Service Guide 99
  • Intel MFS5520VIR | Specification Update - Page 116
    pool or as a spare, but was taken offline due to an extraction or insertion of the drive, a user action (for example, Force Offline), or a drive hardware error. Choose the appropriate action from the Action Menu stale state to preserve the data (for 100 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 117
    pool as needed. A dedicated hot spare is assigned to a specific storage pool. See "Create a Hot-spare Drive " on page 103 for instructions on creating a hot spare. Make Hot Spare is present only if assigned as either a global or dedicated hot spare. Intel® Modular Server System Service Guide 101
  • Intel MFS5520VIR | Specification Update - Page 118
    state (the drive has obsolete array information). This can occur when the drive is taken offline by the user, by physically removing the drive or by a disk error. When the storage pool is rebuilt to correct Drive help box located under the action box. 102 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 119
    to all storage pools) or a dedicated hot-spare drive (assigned to a specific storage pool) and click Apply. Once the hot spare has been created, a successful action dialog will be displayed and the information icon will change to the hot spare icon, . Intel® Modular Server System Service Guide 103
  • Intel MFS5520VIR | Specification Update - Page 120
    information and actions available for the selected switch module highlighted in green. The current health and product summary information is quickly available by moving the mouse over the Health/Information icon located on the selected switch module. 104 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 121
    Figure 65. Intel® Gigabit Ethernet Switch Module View Health Icons The health icons are displayed on the graphical representation of the component when the component is selected. Intel® Modular Server System Service Guide 105
  • Intel MFS5520VIR | Specification Update - Page 122
    activity Intel® Gigabit Ethernet Switch Module Actions The actions available for a selected switch module are Intel® Gigabit Ethernet Switch AXXSW1GB User Guide for more information on how to use the Advanced Configuration Switch interface. 106 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 123
    . Intel® Gigabit Ethernet Switch Module Help To quickly access additional help regarding the Intel® Gigabit Ethernet Switch Module screen Intel® Gigabit Ethernet Switch AXXSW1GB User Guide for more information on how to use the Advanced Configuration. Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 124
    number in the box under the VLAN column for the specific port. Each individual port can be assigned to only one VLAN at a time. The compute module does not have to be present in the system in following image illustrates the Configure Ports dialog. 108 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 125
    Ethernet Switch Module in a new window. This interface exposes all configuration settings for the switch. Configuration settings modified in either the Advanced Configuration or the Intel® Modular Server Control UI are displayed in both interfaces. Intel® Modular Server System Service Guide 109
  • Intel MFS5520VIR | Specification Update - Page 126
    visual view of the back of the chassis, which includes the management module, switch modules, storage control modules, power supplies and fans. This real-time view enables an IT administrator and component description is displayed in a pop-up box. 110 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 127
    of the system and select the specific storage control module from the system graphic. The content displayed on the informational tabs, action box, and help box will be updated with product-specific information and available actions for the selected Intel® Modular Server System Service Guide 111
  • Intel MFS5520VIR | Specification Update - Page 128
    the Health/Information icon located on the selected storage control module. Figure 69. Intel® Storage Control Module View Health Icons The health icons are displayed on the graphical representation of the component when the component is selected. 112 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 129
    is the primary controller by default. The SCM is operational and this SCM is the secondary controller in a dual SCM configuration. The SCMs have redundancy. Intel® Modular Server System Service Guide 113
  • Intel MFS5520VIR | Specification Update - Page 130
    remote reset of the selected Intel® Storage Control Module. Enable/Disable server access to the external expansion port on the selected storage control module. Additional external storage options are available to the server via the expansion port. 114 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 131
    -specific information and available actions for the management module highlighted in green. The current health and product summary information is quickly available by moving the mouse over the Health/Information icon located on the management module graphic. Intel® Modular Server System Service
  • Intel MFS5520VIR | Specification Update - Page 132
    Figure 70. Intel® Management Module View Health Icons The health icons are displayed on the graphical representation of the component when the component is selected. 116 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 133
    remote reset of the selected management module. Intel® Management Module Details The tabs displayed below the system graphic provide detailed information for the management module. For a description of these tabs, refer to the following table. Intel® Modular Server System Service Guide 117
  • Intel MFS5520VIR | Specification Update - Page 134
    Intel® Management Module Help To quickly access additional help regarding the Intel® Management Module screen, actions, and tabs, click on the Get Help button in the Management Module help box located under the actions box. Intel® Modular Server specific Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 135
    , system configuration information, event logs, diagnostic information, storage resource allocation map, switch performance, and hardware and firmware inventory. The following reports are supported: Storage Layout, Events, Dashboard, and Diagnostics. Intel® Modular Server System Service Guide 119
  • Intel MFS5520VIR | Specification Update - Page 136
    drive mappings to the servers showing the drive numbers for each drive on the server • The storage control module affinity for each virtual Finance" is assigned to Server 1 as Drive 0. The virtual drive "Marketing" is assigned to Server 2 as Drive 0. 120 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 137
    Figure 71. Storage Layout Graphical View Intel® Modular Server System Service Guide 121
  • Intel MFS5520VIR | Specification Update - Page 138
    The following features enable the IT administrator to quickly access specific information from the System Event Log screen: • Sort by ID, Date/Time, Component Type, Description, Severity, and User by clicking on the appropriate column header. • View filter: Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 139
    on the component link in the specific event row to be redirected to the component screen to view available actions and additional information to resolve or troubleshoot the issue. • Rows per screen additional events. Figure 73. System Event Log Screen Intel® Modular Server System Service Guide 123
  • Intel MFS5520VIR | Specification Update - Page 140
    left navigation panel. This view is displayed by default after successfully logging into the Intel® Modular Server Control UI. The Dashboard consists of the following five main areas: • Required Actions its current health and a component description. 124 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 141
    click the component name to be redirected to the specific component configuration screen. • Power Load: Quickly enables support personnel for problem resolution. To access the Diagnostics screen, click Reports > Diagnostics in the left navigation panel. Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 142
    can communicate with the management module. Clicking on the Internal user account information). Clicking the System Information Report will download the service information, which can be saved or opened as shown in Figure 78 and Figure 79. 126 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 143
    Figure 77. Diagnostic Tests Figure 78. System Information Report Download Intel® Modular Server System Service Guide 127
  • Intel MFS5520VIR | Specification Update - Page 144
    Figure 79. System Information Report 128 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 145
    troubleshoot any issues with the system. The test report is encrypted and can only be unlocked by a service technician. The test report does not contain user account information. Figure 80. Diagnostics - Service are either enabled or all are disabled. Intel® Modular Server System Service Guide 129
  • Intel MFS5520VIR | Specification Update - Page 146
    check does make the data consistent, it does not necessarily correct errors. Redundancy check does provide the user with an indication that drive information may be suspect. The customer can Enable or Disable Redundancy Check schedule by themselves. 130 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 147
    static-Address or Automatic-DHCP. The initial management module IP address is set to the static IP address of 192.168.150.150. This IP address may be set to DHCP or a different IP address to enable access within an existing network environment. Intel® Modular Server System Service Guide 131
  • Intel MFS5520VIR | Specification Update - Page 148
    only. To access the IP Configuration screen, click Settings > IP Configuration in the left navigation panel. The Intel® Modular Server Control IP Configuration screen similar to the following image is displayed. Figure 83. Settings - IP Configuration 132 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 149
    directly set the date and time or specify a network time server to set the date and time on the management module. The new date and time will be displayed once the management module is reset. Figure 84. Settings - System Date and Time Configuration Intel® Modular Server System Service Guide 133
  • Intel MFS5520VIR | Specification Update - Page 150
    required. The button toggles between the two options. 5. Click Save Changes. In the Update dialogue box Update and Reboot. This action will reset the management module to enable the changes to take effect. 134 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 151
    configuration is supported via the Intel® Modular Server Control interface. For more information regarding SNMP v2 and SNMP v3 support for the installed Unified Firmware Update (UFU) release, refer to the Unified Firmware Update (UFU) Release Notes. Intel® Modular Server System Service Guide 135
  • Intel MFS5520VIR | Specification Update - Page 152
    to communicate with the SNMP agent on the Management Module. The SNMP Options must be configured in order to By default, this setting is set to enabled. The Intel® Modular Server System supports readonly access to system information via SNMP v2. To Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 153
    set User Access to either read-only or read-write. With read-only access, an SNMP v3 user account can view system settings remotely. With read-write access, an SNMP v3 user account can view system settings remotely and change the Intel® Compute Module's Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 154
    . Use this procedure if an outside SNMP tool has modified or deleted the internal-chassis management users. This procedure may take up to a minute to complete. To reactivate the SNMP v3 , go to the SNMP v3 settings screen. Figure 88. Reset SNMP v3 138 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 155
    and communicate with an LDAP server on your network. To test the current configuration, click the "Test LDAP" button where you will be prompted for a user name and password. The user must be a valid CMM user added through the Users Settings page. Intel® Modular Server System Service Guide 139
  • Intel MFS5520VIR | Specification Update - Page 156
    severity and notification process. To configure an event policy, click Edit for a specific event. The Edit dialog box appears. Use the dialog box to change the severity of a specific event, as well as to select who to notify when the event occurs. 140 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 157
    Figure 91. Settings - Event Policies Configuration Screen Intel® Modular Server System Service Guide 141
  • Intel MFS5520VIR | Specification Update - Page 158
    test the current configuration, click the "Test LDAP" button where you will be prompted for a user name and password. The user must be a valid CMM user added through the Users Settings page." on page 139. Figure 92. Email Notification Configuration 142 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 159
    Server Address. 3. Enter the SysLog server port number. 4. Select the protocol used by the syslog server (UDP or TCP). The syslog server must support either syslogd or syslog-ng logging using either UDP (User . Figure 93. SYSLOG Notification Setting Intel® Modular Server System Service Guide 143
  • Intel MFS5520VIR | Specification Update - Page 160
    Users, Switch, and Storage from one chassis and import to a chassis with a similar configuration. Figure 94. Configuration Import /Export Language Option Setting The Intel® Modular Server for the online help. 3. Click Save Changes to save the changes. 144 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 161
    Pack upgrade offers enhanced management capabilities and allows users to more easily deploy multiple chassis. It includes the following features. - Authentication of users using an LDAP server - Forwarding events to an external SysLog server Intel® Modular Server System Service Guide 145
  • Intel MFS5520VIR | Specification Update - Page 162
    IT administrator to quickly view the installed versions and determine if an update is required. The Unified Firmware Update supports firmware updates for the management module, storage control modules, switch modules, fans, server BIOS, and firmware. 146 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 163
    . 3. Select the file from the console system. File must be accessible from the console system. Refer to the Unified Firmware Update Release Notes for detailed instructions on how to update the system firmware. Intel® Modular Server System Service Guide 147
  • Intel MFS5520VIR | Specification Update - Page 164
    to the administrative user and only when system settings are actually corrupt. After selecting this option and clicking Apply, the management module will reset. As the management module boots, the settings will be repaired. If this operation is 148 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 165
    recent backup System settings are automatically backed up each time the management module is reset or inserted into the chassis, and backups are made user manual for the factory default password (this password is not affected by any prior firmware updates). Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 166
    functions. Figure 99. Online Help Log Out from the Intel® Modular Server Control The Log Off link is located at the top right of the banner. Clicking it ends the current Intel® Modular Server Control session and returns the user to the login screen. 150 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 167
    Actions This section provides possible solutions for these specific problems: • Chassis fan module not functioning • Cannot connect to management module • Cannot connect to a compute module • Cannot connect a compute module to a storage control module Intel® Modular Server System Service Guide 151
  • Intel MFS5520VIR | Specification Update - Page 168
    • Is the compute module powered on and operating normally? - If so, is an operating system installed on the compute module? - If so, is the operating system installed on the compute module operating properly and configured properly for the network? 152 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 169
    the status of the system using the Intel® Modular Server Control. Diagnostic LED Information The various modules and compute modules designed for use with the Intel® Modular Server System MFSYS25/MFSYS35 provide a number of diagnostic LEDs that may aid in troubleshooting your system. A list of these
  • Intel MFS5520VIR | Specification Update - Page 170
    on On = I/O cooling module fault On = Fan module power on On = Fan module fault On = Storage control module power on On = Storage control module fault Slow blink = Dirty cache On = Ethernet switch module power on On = Ethernet switch module fault 154 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 171
    Blinking Green = Port activity On = Management module power on On = Management module fault On = Power supply module power on On = Power supply module fault NIC LEDs LED Color Left LED Amber 100 Mbps connection Solid Green 1000 Mbps connection Intel® Modular Server System Service Guide 155
  • Intel MFS5520VIR | Specification Update - Page 172
    156 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 173
    adhere to the assembly instructions in this guide to ensure and maintain , before computer integration, make sure that the chassis, power supply, and other modules have passed EMC testing using a server board with may require further evaluation. Intel® Modular Server System Service Guide 157
  • Intel MFS5520VIR | Specification Update - Page 174
    on material restrictions and compliance you can view Intel's Environmental Product Content Specification at http://supplier.intel.com/ehs/ environmental.htm. Europe - European Directive PBDE) Quantity limit of 0.01% by mass (100 PPM) for: Cadmium 158 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 175
    following regulatory and safety markings. In the event there is no room for a marking(s) on the chassis, the information is provided here in the product guide. Requirement Country cULus Listing Marks USA/Canada Marking Intel® Modular Server System Service Guide 159
  • Intel MFS5520VIR | Specification Update - Page 176
    Requirement Country GS Mark Germany Marking CE Mark Europe FCC Marking (Class A) USA EMC Marking (Class A) Canada VCCI Marking Japan (Class A) 160 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 177
    Intel products. KCC Mark Korea Note: The following symbol is the new Korean EMC mark and is seen on newer Intel products. Management Methods on Control of Pollution from Electronic Information Products (China RoHS declaration) 部件名称 (Parts) Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 178
    . Note that some of the component types listed above may or may not be a part of the enclosed product. Belarus Safety Compliance Mark Belarus 162 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 179
    California Code of Regulations, Title 22, Division 4.5, and Chapter 33: Best Management Practices for Perchlorate Materials. This product may include a battery which contains Perchlorate material. Intel® Modular Server System Service Guide 163
  • Intel MFS5520VIR | Specification Update - Page 180
    To reduce the risk of electrical shock, disconnect (2) two power supply cords before servicing. Simplified Chinese: Traditional Chinese: Nordic Countries Safety German: Dieses Geräte hat only to a properly earth grounded outlet." Standy-by power 164 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 181
    Devices: Must be UL recognized or UL listed accessory and TUV or VDE licensed. Maximum power rating of any one device is 19 watts. Total server configuration is not to exceed the maximum loading conditions of the power supply. Intel® Modular Server System Service Guide 165
  • Intel MFS5520VIR | Specification Update - Page 182
    cause undesired operation. Intel Corporation 5200 N.E. Elam Young accordance with the instructions, may cause user's authority to operate the equipment. The customer is responsible for ensuring compliance of the modified product. Only peripherals (computer Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 183
    by California Code of Regulations, Title 22, Division 4.5, Chapter 33: Best Management Practices for Perchlorate Materials. This product/part includes a battery which contains perchlorate material. Intel® Modular Server System Service Guide 167
  • Intel MFS5520VIR | Specification Update - Page 184
    , it may cause radio interference. Install and use the equipment according to the instruction manual. Recycle battery in accordance with applicable WEEE and Battery laws. Perchlorate Material - is located on the outside rear area of the product. 168 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 185
    by California Code of Regulations, Title 22, Division 4.5, Chapter 33: Best Management Practices for Perchlorate Materials. This product/part includes a battery which contains perchlorate material. Intel® Modular Server System Service Guide 169
  • Intel MFS5520VIR | Specification Update - Page 186
    170 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 187
    Appendix B: Installation/Assembly Safety Instructions English The power supply in this product contains no user-serviceable parts. Refer servicing only to qualified personnel. Do not attempt to not operate the system with the chassis covers removed. Intel® Modular Server System Service Guide 171
  • Intel MFS5520VIR | Specification Update - Page 188
    type recommended by the equipment manufacturer. Dispose of used batteries according to manufacturer's instructions. The system is designed to operate in a typical office environment. Choose a because they serve as the product's main power disconnect. 172 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 189
    , um elektrostatische Ladungen (ESD) über blanke Metallstellen bei der Handhabung der Komponenten zu vermeiden. 6. Schalten Sie das System niemals ohne ordnungsgemäß montiertes Gehäuse ein. Intel® Modular Server System Service Guide 173
  • Intel MFS5520VIR | Specification Update - Page 190
    . Die Batterie darf nur durch denselben oder einen entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt werden. Entsorgen Sie verbrauchte Batterien den Anweisungen des Herstellers entsprechend. 174 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 191
    ; • "über ausreichend Platz verfügen, um Zugang zu den Netzkabeln zu gewährleisten, da der Stromanschluß des Produkts hauptsächlich über die Kabel unterbrochen wird Intel® Modular Server System Service Guide 175
  • Intel MFS5520VIR | Specification Update - Page 192
    à l'arrière du système, déverrouillez-le et retirez-le. 2. Retirez toutes les vis des panneaux et mettez-les dans un endroit sûr. 3. Retirez les panneaux. Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 193
    type ou d'un type équivalent recommandé par le fabricant. Disposez des piles usées selon les instructions du fabricant. Le système a été conçu pour fonctionner dans un cadre de travail normal. étant le seul moyen de mettre le système hors tension). Intel® Modular Server System Service Guide 177
  • Intel MFS5520VIR | Specification Update - Page 194
    bloqueo de seguridad de la parte posterior del sistema, si se ha instalado uno. 2. Extraiga y guarde todos los tornillos de las tapas.Extraiga las tapas. Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 195
    tierra correctamente instalada. • "Provisto de espacio suficiente como para acceder a los cables de alimentación, ya que éstos hacen de medio principal de desconexión del sistema. Intel® Modular Server System Service Guide 179
  • Intel MFS5520VIR | Specification Update - Page 196
    lucchetto dal retro del sistema qualora ve ne fosse uno installato. 2. Togliere e mettere in un posto sicuro tutte le viti delle coperture. 3. Togliere le coperture. Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 197
    di una presa a muro correttamente installata. • "Dotata di spazio sufficiente ad accedere ai cavi di alimentazione, i quali rappresentano il mezzo principale di scollegamento del sistema. Intel® Modular Server System Service Guide 181
  • Intel MFS5520VIR | Specification Update - Page 198
    182 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 199
    in serious injury or death if safety instructions are not followed. Indicates hot components or surfaces. Indicates do not touch fan blades, may result in injury. Indicates to unplug all AC power cord(s) to disconnect AC power Please recycle battery Intel® Modular Server System Service Guide 183
  • Intel MFS5520VIR | Specification Update - Page 200
    evaluated as Information Technology Equipment (ITE), which may be installed in offices, schools, computer rooms, and similar commercial type locations. The suitability of this product for other one AC power cord. Make sure all AC power cords are 184 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 201
    contains no user-serviceable parts. Do not open the power supply. Hazardous voltage, current and energy levels are present inside the power supply. Return to manufacturer for servicing. When replacing AC power cords from the system or wall outlet. Intel® Modular Server System Service Guide 185
  • Intel MFS5520VIR | Specification Update - Page 202
    boards carefully. They can be extremely sensitive to ESD. Hold boards only by their edges. After removing a board from its protective wrapper or from the server, place the board component side up on a grounded, static free surface. Use a 186 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 203
    instructions. Laser Peripherals or Devices Caution: To avoid risk of radiation exposure and/or personal injury: • Do not open the enclosure of any laser peripheral or device • Laser peripherals or devices have are not user serviceable • Return to manufacturer for servicing Intel® Modular Server
  • Intel MFS5520VIR | Specification Update - Page 204
    Deutsch Sicherheitshinweise für den Server Das vorliegende Dokument bezieht sich auf Intel® Serverplatinen, Intel® Servergehäuse (Standfuß und Rack) sowie installierte Peripheriegeräte. von der Netzspannung zu trennen. Bereiten Sie bitte Batterie auf 188 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 205
    Transportieren oder Anheben von Geräten. • Entfernen Sie alle Komponenten, die sich leicht abnehmen lassen, um das Gewicht zu reduzieren und die Handhabung zu erleichtern. Intel® Modular Server System Service Guide 189
  • Intel MFS5520VIR | Specification Update - Page 206
    , ziehen Sie dessen Netzkabel ab, bevor Sie es aus dem Server ausbauen. Zur Vermeidung von Stromschlägen schalten Sie den Server aus, und trennen Sie vor dem Öffnen des Geräts müssen an eine ordnungsgemäß geerdete Steckdose angeschlossen sein. 190 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 207
    Teile. Schicken Sie das Gerät für Wartungsarbeiten an den Hersteller zurück. • Schalten Sie den Server aus, und ziehen Sie alle Netzkabel ab, bevor Sie Komponenten ein- oder ausbauen, die nicht hot , darf es nicht ohne diese Abdeckung betrieben werden. Intel® Modular Server System Service Guide 191
  • Intel MFS5520VIR | Specification Update - Page 208
    Server mit der Bauelementseite nach oben auf eine geerdete, statisch entladene Unterlage.Verwenden Sie dazu, sofern verfügbar, eine leitfahige Schaumstoffunterlage, aber niche die Schutzhülle der Platine. Ziehen Sie die Platine nicht über eine Fläche. 192 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 209
    oder Laser- Komponenten. • Laser-Peripheriegeräte oder -Komponenten besitzen keine für den Benutzer wartungsbedürftigen Teile. • Schicken Sie das Gerät für Wartungsarbeiten an den Hersteller zurück. Intel® Modular Server System Service Guide 193
  • Intel MFS5520VIR | Specification Update - Page 210
    uniquement par des techniciens qualifiés. Vous devez suivre les informations de ce guide et les instructions d'assemblage des manuels de serveur pour vérifier et maintenir la conformité produit dans des catégories et environnements de produits et 194 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 211
    autre assistance appropriée lorsque vous déplacez et soulevez le matériel. • Pour réduire le poids en vue de faciliter la manipulation, retirez tout composant amovible. Intel® Modular Server System Service Guide 195
  • Intel MFS5520VIR | Specification Update - Page 212
    Les cordons d'alimentation doivent répondre aux critères suivants : • Le cordon d'alimentation doit supporter une intensité supérieure à celle indiquée sur le produit. • Le cordon d'alimentation des prises électriques correctement reliées à la terre. 196 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 213
    . Si votre système est fourni avec une protection sur le ventilateur, ne mettez pas le système en route sans la protection en place. Intel® Modular Server System Service Guide 197
  • Intel MFS5520VIR | Specification Update - Page 214
    fixé à un support inamovible pour éviter qu'il ne bascule lors de l'extension d'un serveur ou d'un élément de l'équipement. Le rack doit être installé conformément aux instructions du fabricant. Installez ce que la carte ne glisse sur aucune surface. 198 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 215
    composants sont correctement installés. • Fixez les panneaux au châssis en suivant les instructions du produit. Périphériques laser Attention: Pour éviter tout risque d'exposition aux utilisateur. • Retournez-les au fabricant en cas de problème. Intel® Modular Server System Service Guide 199
  • Intel MFS5520VIR | Specification Update - Page 216
    a las directrices de esta guía y a las instrucciones de montaje de los manuales del servidor para asegurar y mantener el cumplimiento con las certificaciones y homologaciones existentes de que sea necesario llevar a cabo una evaluación adicional 200 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 217
    sean adecuados al trasladar o levantar el equipo. • Para que el peso sea menor para manipularlo con más facilidad, extraiga los componentes que sean de fácil extracción. Intel® Modular Server System Service Guide 201
  • Intel MFS5520VIR | Specification Update - Page 218
    conexión en funcionamiento. Algunas fuentes de alimentación de electricidad de los servidores de Intel utilizan el polo neutral del fuselaje. Para evitar riesgos de choques eléctricos poderse efectuar de forma inmediata con el fin de desconectarlos. 202 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 219
    se le ha suministrado con una protección para el ventilador, asegúrese de que cuando esté funcionando el sistema la protección esté en su sitio. Intel® Modular Server System Service Guide 203
  • Intel MFS5520VIR | Specification Update - Page 220
    . Utilice una almohadilla de espuma conductora si dispone de ella, pero nunca el envoltorio de la tarjeta. No deslice la tarjeta sobre ninguna superficie. 204 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 221
    caja de ningún periférico o dispositivo láser • Los periféricos o dispositivos láser no pueden ser reparados por el usuario • Haga que el fabricante los repare. Intel® Modular Server System Service Guide 205
  • Intel MFS5520VIR | Specification Update - Page 222
    简体中文 Intel Intel Intel Web UL 注意 警告 206 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 223
    ITE ITE 场地选择 注意事项 5V Intel® Modular Server System Service Guide 207
  • Intel MFS5520VIR | Specification Update - Page 224
    208 Intel® Modular Server System Service Guide
  • Intel MFS5520VIR | Specification Update - Page 225
    ESD) ESD ESD ESD ESD Intel® Modular Server System Service Guide 209
  • Intel MFS5520VIR | Specification Update - Page 226
    其他危险 替换电池 210 Intel® Modular Server System Service Guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
Intel
®
Modular Server System Service Guide
A Guide for Technically Qualified Assemblers of Intel
®
Identified
Subassemblies/Products
Intel Order Number E70616-004