Intel S845WD11U Product Guide

Intel S845WD11U Manual

Get Intel S845WD11U PDF manuals and user guides View all Intel S845WD11U manuals
Add to My Manuals
Save this manual to your list of manuals

Intel S845WD11U manual content summary:

  • Intel S845WD11U | Product Guide - Page 1
    Intel® Server Board S845WD1-E Product Guide A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/Products Order Number: A88885-002
  • Intel S845WD11U | Product Guide - Page 2
    . No part of this document may be copied or reproduced in any form or by any means without prior written consent of Intel. An Intel® product, when used in accordance with its associated documentation, is "Year 2000 Capable" when, upon installation, it accurately stores, displays, processes, provides
  • Intel S845WD11U | Product Guide - Page 3
    20 PCI IDE Support 20 BIOS Updates ...21 Language Support 21 Custom Splash Screen 21 Recovering BIOS Data 22 Boot Options ...23 CD-ROM and Network Boot 23 Booting Without Attached Devices 23 Fast Booting Systems with Intel® Rapid BIOS Boot 24 Intel Rapid BIOS Boot 24 BIOS Security Passwords
  • Intel S845WD11U | Product Guide - Page 4
    PME# Wake-up Support 34 PCI I/O BIOS with the Intel Flash Memory Update Utility 55 Preparing for the Update 55 Obtaining the BIOS Update File 56 Recording the Current BIOS Settings 56 Creating Bootable Media 56 Creating a Bootable Diskette 57 iv Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 5
    77 Hard Disk Drives Submenu 78 Removable Devices Submenu 78 ATAPI CDROM Drives Submenu 79 Exit Menu ...79 4 Solving BIOS Problems 81 BIOS Beep Codes...81 BIOS Error Messages ...82 5 Getting Help 85 World Wide Web ...85 Telephone ...85 6 Technical Reference 87 Server Board Connectors...87
  • Intel S845WD11U | Product Guide - Page 6
    Battery...52 13. Connecting the IDE Cable 53 14. BIOS Configuration Jumper Block Location 54 15. Power and Hardware Control Tables 1. Server Board Features...9 2. Supported Processors ...13 3. Supported Memory Configurations 13 4. Supervisor and User vi Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 7
    . Hard Disk Drives Submenu 78 33. Removable Devices Submenu 78 34. ATAPI CDROM Drives Submenu 79 35. Exit Menu ...79 36. Beep Codes ...81 37. BIOS Error Messages ...82 38. System Memory Map ...89 39. DMA Channels ...89 40. I/O Map ...90 41. Interrupts ...91 42. Product Certification Markings 94
  • Intel S845WD11U | Product Guide - Page 8
    viii Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 9
    ® 10/100 82550PM Fast Ethernet Controllers • ATA-100 controller, Promise Technology† PDC20267 BIOS Intel/AMI BIOS with support for: • Advanced Configuration and Power Interface (ACPI) • Plug and Play • SMBIOS Power Management Support for ACPI • Wake on PME • Wake on Ring (WOR) • Wake on LAN
  • Intel S845WD11U | Product Guide - Page 10
    99 recommendations. A C F B D E GH I A. PS/2 mouse B. PS/2 keyboard C. Parallel port D. Serial port A E. Video port F. NIC 1 G. USB port 1 H. USB port 2 I. NIC 2 Figure 1. Back Panel Connectors OM14342 10 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 11
    Front Panel Connectors Figure 2 shows the location of the front panel connectors. A B A. Front Panel Header B. HDD LED Figure 2. Front Panel Connectors OM14351 Description 11
  • Intel S845WD11U | Product Guide - Page 12
    drive connector C. Chassis intrusion connector R. System fan (fan 3) D. AGP connector S. Intel 82801BA I/O controller hub (ICH2) E. Back panel connectors T. HDD LED connector F. O. Secondary IDE connector Figure 3. Server Board Components 12 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 13
    memory configurations. ✏ NOTE Only low profile DIMMs can be supported in a 1U server chassis. Check the Intel Customer Support website for the latest tested memory list: http://support.intel.com/support/motherboards/server/SE845WD1-E Table 3. DIMM Capacity 64 MB 64 MB 128 MB 128 MB 128 MB
  • Intel S845WD11U | Product Guide - Page 14
    the data bus ECC can be disabled or enabled by BIOS. It is enabled by default. The MCH provides the following: • An integrated Synchronous DRAM memory controller with auto detection of SDRAM. • Support for ACPI Rev 1.0b compliant power management. 14 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 15
    (with 256-byte battery backed CMOS RAM). • Supports two Master/DMA devices. Intel 82802AB Firmware Hub (FWH) The Intel 82802AB Firmware Hub (FWH) includes a 4 megabit PCI power management support • Fan control:  Four fan control outputs  Four fan tachometer inputs The BIOS Setup program provides
  • Intel S845WD11U | Product Guide - Page 16
    the main power connector. The serial ports' NS16C550-compatible UART supports data transfers at speeds up to 115.2 kb/s with BIOS support. Parallel Port The 25-pin D-Sub parallel port connector and voltage monitoring • Chassis intrusion detection 16 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 17
    position. ✏ NOTE Chassis intrusion detection may be implemented using Intel LANDesk Client Manager or third-party software. Real-Time Clock, alarm features. The real-time clock supports 256 bytes of battery-backed CMOS SRAM in two banks that are reserved for BIOS use. A coin-cell battery (CR2032
  • Intel S845WD11U | Product Guide - Page 18
    verify that Legacy USB support in the BIOS Setup program is set to Enabled and follow the operating system's installation instructions. ✏ NOTE Legacy USB support is for keyboard, mice, and hubs only. Other USB devices are not supported in legacy mode. 18 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 19
    bus supporting host and target throttling and transfer rates of up to 66 MB/sec. ATA-66 protocol is similar to Ultra DMA and is device driver compatible reports the transfer rate and translation mode to the BIOS. The S845WD1-E server board supports Laser Servo (LS-120) diskette technology through
  • Intel S845WD11U | Product Guide - Page 20
    Intel/AMI BIOS that is stored in the Firmware Hub (FWH) and can be updated using a disk-based program. The FWH contains the BIOS Setup program, POST, the PCI auto-configuration utility, and Plug and Play support. The S845WD1-E server board supports system BIOS manual configuration in the BIOS Setup
  • Intel S845WD11U | Product Guide - Page 21
    the language section of the BIOS. • Updating replaceable BIOS modules, such as the video BIOS module. • Inserting a custom splash screen. ✏ NOTE Review the instructions distributed with the upgrade utility before attempting a BIOS update. Language Support The BIOS Setup program and help messages
  • Intel S845WD11U | Product Guide - Page 22
    recovery diskette, a bootable diskette must be created and the BIOS update files copied to it. BIOS upgrades and the Intel Flash Memory Update Utility are available from Intel Customer Support through the Intel World Wide Web site. ✏ NOTE Even if the computer is configured to boot from an LS-120
  • Intel S845WD11U | Product Guide - Page 23
    CD-ROM is supported in compliance to the El Torito bootable CD-ROM format specification. Under the Boot menu in the BIOS Setup program, ATAPI installed. Booting Without Attached Devices For use in embedded applications, the BIOS has been designed so that after passing the POST, the operating system
  • Intel S845WD11U | Product Guide - Page 24
    and configuring peripherals properly • Using an optimized BIOS, such as the Intel Rapid BIOS Intel Rapid BIOS Boot Using the following BIOS Setup program settings reduces the POST execution time. the IDE Configuration Submenu of the BIOS Setup program). 24 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 25
    security features that restrict whether the BIOS Setup program can be accessed and who can boot the server. A supervisor password and a user password can be set for the Setup menu and for
  • Intel S845WD11U | Product Guide - Page 26
    System Management BIOS (SMBIOS) to use SMBIOS. The BIOS stores and reports the following SMBIOS information: • BIOS data, such as the BIOS revision level • Fixed-system . The BIOS supports an SMBIOS table interface for such operating systems. Using this support, an SMBIOS service-level application
  • Intel S845WD11U | Product Guide - Page 27
    . Wake on Ring The operation of Wake on Ring can be summarized as follows: • Powers up the server from the ACPI S5 state. • Modem must support PME. • Requires two calls to access the server:  The first call powers up the server  The second call enables access (when the appropriate software is
  • Intel S845WD11U | Product Guide - Page 28
    (some add-in boards may require an ACPI-aware driver), video displays, and hard disk drives • Methods for Support for multiple wake-up events (see Table 7. Wake-up Devices and Events, page30) • Support for a front panel power and sleep mode switch 28 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 29
    uses information from applications and user settings to put the system as a whole into a low-power state. Table 6 lists the power states supported by the S845WD1-E board along with the associated system power targets. See the ACPI specification for a complete description of the various system and
  • Intel S845WD11U | Product Guide - Page 30
    source. No power to the system. Service can be performed safely. Notes: supports this wake event. 2. For LAN and PME#, S5 is disabled by default in the BIOS support. In addition, software, drivers, and peripherals must fully support ACPI wake events. 30 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 31
    Wake from USB • Wake from PS/2 keyboard • PME# wake-up support LAN wake capabilities and Instantly Available PC technology require power from the +5 . The total amount of standby current required depends on the wake devices supported and manufacturing options. ✏ NOTE The use of Resume on Ring and
  • Intel S845WD11U | Product Guide - Page 32
    supports remote power on/off, the S845WD1-E server board can turn off the system power through software control. When the system BIOS receives the correct command from the operating system, the BIOS feature in the BIOS Setup program's the S845WD1-E server board supports LAN wake capabilities with
  • Intel S845WD11U | Product Guide - Page 33
    in power management and can be used to wake the computer. The use of Instantly Available PC technology requires operating system support and PCI 2.2 compliant add-in cards and drivers. The standby power indicator LED shows that power is still present even when the computer appears to be off. Figure
  • Intel S845WD11U | Product Guide - Page 34
    . Wake from PS/2 Devices PS/2 device activity wakes the computer from an ACPI S1 state. PME# Wake-up Support When the PME# signal on the PCI bus is asserted, the computer wakes from an ACPI S1, S4, or S5 state (with Wake on PME enabled in BIOS). 34 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 35
    32-bit, 33-MHz PCI Subsystem All 32-bit, 33-MHz PCI I/O for the S845WD1-E server board is directed through the Intel 82801BA I/O Controller Hub (ICH2). The PCI bus supports the following embedded devices and connectors: • 2D/3D Graphics Accelerator: ATI Rage XL Video Controller. • Two 10/100 Network
  • Intel S845WD11U | Product Guide - Page 36
    Technology PDC20267 31 ATI Rage XL Video Controller PCI Arbitration The PCI bus supports six PCI masters (ATI Rage XL, two Intel 82550s, Promise ATA-100 Controller, PCI connector 1 and an arbiter (RAID 0+1) for storage capacity and data redundancy. 36 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 37
    and LCD monitors up to 100 Hz vertical refresh rate. The S845WD1-E server board provides a standard 15-pin VGA connector and supports disabling of the on-board video through the BIOS Setup menu or when a plug-in video card is installed in the AGP slot or any of the PCI slots. Video
  • Intel S845WD11U | Product Guide - Page 38
    's baseline functionality is equivalent to that of the Intel® 82559, with the addition of Alert-on-LAN functionality. The S845WD1-E server board supports independent disabling of the two NIC controllers using the BIOS Setup menu. The 82550PM supports the following features: • Glueless 32-bit PCI
  • Intel S845WD11U | Product Guide - Page 39
    monitored with LDCM. Intel LANDesk Client Manager software and user guides that provide more information on using Intel LDCM software are available on the Intel Server Board S845WD1-E Resource CD and are also available for download at: http://www.support.intel.com/support/motherboards/server/S845WD1
  • Intel S845WD11U | Product Guide - Page 40
    40 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 41
    the final configuration of your end system product may require additional EMC compliance testing. For more information please contact your local Intel Representative. See "Regulatory and Integration Information" on page 93 for product Safety and EMC regulatory compliance information. This is an FCC
  • Intel S845WD11U | Product Guide - Page 42
    narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can damage the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper
  • Intel S845WD11U | Product Guide - Page 43
    latest tested memory list: http://support.intel.com/support/motherboards/server/SE845WD1-E DIMM Installation Guidelines All memory components and DIMMs used with the S845WD1-# server board must comply with the DDR specifications. These include the following: • Intel® Spec Addendum Rev 0.9 for the
  • Intel S845WD11U | Product Guide - Page 44
    . 7. Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets. 8. Replace the server's cover and reconnect the AC power cord. 44 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 45
    Installing the I/O Shield CAUTION Systems based on the S845WD1-E server board need the I/O shield properly installed to pass emissions (EMI) certification testing and to meet Class B emissions compliance levels. Without the I/O shield, or with an improperly installed I/O shield, the server system
  • Intel S845WD11U | Product Guide - Page 46
    Installing the Server Board Refer to your chassis manual for instructions on installing the server board. Eight screws secure the server board to the chassis. Figure 7 injury or equipment damage. Figure 7. Location of the Mounting Screw Holes OM14283 46 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 47
    Installing a Processor To install a processor, follow these instructions: 1. Observe the safety and ESD precautions at the beginning of this chapter. 2. Locate the processor socket and raise the socket handle completely (see Figure 8, B). 3. Aligning
  • Intel S845WD11U | Product Guide - Page 48
    processor fan cable to the processor fan connector (see Figure 11, A). A OM14483 Figure 11. Connecting the Processor Fan Cable to the Processor Fan Connector 48 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 49
    Removing the Processor To remove the processor, follow these instructions: 1. Observe the safety and ESD precautions at the beginning of this chapter. 2. Disconnect the processor fan cable. 3. Detach the fan heat sink clips. 4. Remove the
  • Intel S845WD11U | Product Guide - Page 50
    years whereupon it begins to lose voltage. When the voltage drops below a certain level, the BIOS Setup program settings stored in CMOS RAM (for example, the date and time) might not be ska kasseras enligt de lokala miljövårdsbestämmelserna. (Swedish) 50 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 51
    VARO Räjähdysvaara, jos pariston tyyppi on väärä. Paristot on kierrätettävä, jos se on mahdollista. Käytetyt paristot on hävitettävä paikallisten ympäristömääräysten mukaisesti. (Finnish) VORSICHT Bei falschem Einsetzen einer neuen Batterie besteht Explosionsgefahr. Die Batterie darf nur durch
  • Intel S845WD11U | Product Guide - Page 52
    . 6. Install the new battery in the connector, orienting the "-" as shown in Figure 12. 7. Replace the server cover. Figure 12. Removing the Battery OM14344 52 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 53
    Connecting the IDE Cable The Intel® boxed server board package includes a 40-contact, 80-conductor IDE cable. It is capable of connecting two drives to the server board. The cable supports Ultra ATA/66 and Ultra ATA/100 transfer protocols and is backward compatible with drives using slower IDE
  • Intel S845WD11U | Product Guide - Page 54
    information and passwords for booting. 1 Configure 3 2-3 1 After the POST runs, Setup runs automatically. The maintenance menu is displayed. Recovery 3 None 1 The BIOS attempts to recover the BIOS configuration. A recovery diskette is required. 54 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 55
    update the BIOS with the Intel Express BIOS Update utility: 1. Go to the Intel support web site: http://support.intel.com/support/motherboards/ program. 6. Follow the instructions provided in the dialog boxes to complete the BIOS update. Updating the BIOS with the Intel Flash Memory Update Utility
  • Intel S845WD11U | Product Guide - Page 56
    update file through your server supplier or from the Intel World Wide Web site: http://support.intel.com/support/motherboards/server/ ✏ NOTE Review the instructions distributed with the update utility before attempting a BIOS update. The Intel Flash Memory Update Utility allows you to: • Update the
  • Intel S845WD11U | Product Guide - Page 57
    sys a: To create a bootable diskette using a non-DOS system: 1. Obtain the BIOS update file through your server supplier or from the Intel World Wide Web site: http://support.intel.com/support/motherboards/server/ 2. Copy the BIOS update file to a temporary directory on your hard disk. 3. Change to
  • Intel S845WD11U | Product Guide - Page 58
    BIOS BIOS upgrade diskette in drive BIOS update process. 2. The AUTOEXEC.BAT file updates the BIOS BIOS , check the BIOS identifier (version BIOS Setup program, press when you see the message: Press to Run SETUP 6. For proper operation, load the BIOS before beginning the BIOS upgrade. 9. To
  • Intel S845WD11U | Product Guide - Page 59
    BIOS if an update fails. The following procedure uses recovery mode for the Setup program. See page 54 for more information on Setup modes. ✏ NOTE Because of the small amount of code available in the boot block area, there is no video support 4. Insert the bootable BIOS update diskette into diskette
  • Intel S845WD11U | Product Guide - Page 60
    mode for clearing passwords (see Chapter 2 for instructions) • Recovery mode for BIOS recovery The BIOS Setup Program Operating mode is controlled by the setting refer to the Intel Web site at: http://developer.intel.com/design/security/index1.htm 60 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 61
    values for the current menu Save the current values and exits the BIOS Setup program Exits the menu Maintenance Menu This menu is used to administrative passwords. Clears the Wired for Management Boot Integrity Service (BIS) credentials. Invokes the Extended Configuration submenu.
  • Intel S845WD11U | Product Guide - Page 62
    required. Cache lookups are not performed. Both the video driver and the application must support Write-Combining. • UC (default) Selects UnCacheable (UC) • Auto (default) SDRAM RAS Act. To Pre. • 7 Corresponds to tRAS. • 6 • 5 • Auto (default) 62 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 63
    If non-ECC memory is installed, BIOS will detect and change the setting to nonECC. Specifies the current time. Specifies the current date. ✏ NOTE Additional language support available. For more information visit Intel's support web site at: www.support.intel.com/support/motherboards/server/S845WD1
  • Intel S845WD11U | Product Guide - Page 64
    . Specifies type of connected IDE device. When selected, displays the Diskette Configuration submenu. Configures Event Logging. When selected, displays the Event Log Configuration submenu. 64 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 65
    PCI Configuration Submenu To access this submenu, select Advanced on the menu bar, then PCI Configuration. Maintenance Main Advanced Security Power PCI Configuration Boot Configuration Peripheral Configuration IDE Configuration Diskette Configuration Event Log Configuration Boot Exit The
  • Intel S845WD11U | Product Guide - Page 66
    Description Plug and Play O/S • No (default) • Yes Specifies if manual configuration is desired. No lets the BIOS configure all devices. This setting is appropriate when using a Plug and of the Numlock feature on the numeric keypad of the keyboard. 66 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 67
    Peripheral Configuration Submenu To access this submenu, select Advanced on the menu bar, then Peripheral Configuration. Maintenance Main Advanced Security Power PCI Configuration Boot Configuration Peripheral Configuration IDE Configuration Diskette Configuration Event Log Configuration Boot
  • Intel S845WD11U | Product Guide - Page 68
    -board ATA RAID controller. • Enabled (default) ATI Rage Video • Disabled • Enabled (default) Enables or disables the on-board ATI* Rage video controller. Legacy USB Support • Disabled Enables or disables Legacy USB support. • Enabled (default) 68 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 69
    IDE Configuration Submenu To access this submenu, select Advanced on the menu bar, then IDE Configuration. Maintenance Main Advanced Security Power PCI Configuration Boot Configuration Peripheral Configuration IDE Configuration Diskette Configuration Event Log Configuration Boot The menu
  • Intel S845WD11U | Product Guide - Page 70
    number of sectors per block for transfers from the hard disk drive to memory. Check the hard disk drive's specifications for optimum setting. continued 70 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 71
    Table 23. Primary/Secondary IDE Master/Slave Submenus (continued) Feature PIO Mode (Note) (This feature is present only when Type is not set to Auto.) Ultra DMA (This feature is present only when Type is not set to Auto.) Cable Detected (Note) Options • Auto (default) • Mode 0 • Mode 1 • Mode 2 •
  • Intel S845WD11U | Product Guide - Page 72
    (default) ECC Event Logging • Disabled Enables logging of ECC events. • Enabled(default) Mark Events As Read • Yes (default) Marks all events as read. • No 72 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 73
    Video Configuration Submenu To access this menu, select Advanced on the menu bar, then Event Log Configuration. Maintenance Main Advanced Security Power PCI Configuration Boot Configuration Peripheral Configuration IDE Configuration Diskette Configuration Event Log Configuration Video
  • Intel S845WD11U | Product Guide - Page 74
    No User Access Level (Note 2) • Limited • No Access Sets BIOS Setup Utility access rights for user level. • View Only • supervisor password have been set. 3. If both Legacy USB Support (in the Peripheral Configuration submenu) and Unattended Start (in Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 75
    Power Menu To access this menu, select Power from the menu bar at the top of the screen. Maintenance Main Advanced Security Power ACPI Boot Exit The menu represented in Table 28 is for setting the power management features. Table 28. Power Menu Feature Options ACPI No Options After
  • Intel S845WD11U | Product Guide - Page 76
    sequence. Table 30. Boot Menu Feature Options Quiet Boot • Disabled • Enabled (default) Intel® Rapid BIOS Boot Scan User Flash Area USB Boot PXE Remote Boot Boot Device Priority Hard Disk Drives Removable from the available ATAPI CD-ROM drives. 76 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 77
    Options Description 1st Boot Device 2nd Boot Device 3rd Boot Device 4th Boot Device (Note 1) • Removable Dev. • Hard Drive • ATAPI CD-ROM • Intel® UNDI, PXE • Disabled Specifies the boot sequence from the available types of boot devices. To specify boot sequence: 1. Select the boot device with
  • Intel S845WD11U | Product Guide - Page 78
    display up to twelve hard disk drives, the maximum number of hard disk drives supported by the BIOS. Removable Devices Submenu To access this menu, select Boot on the menu bar, devices, the maximum number of removable devices supported by the BIOS. 78 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 79
    to four ATAPI CDROM drives, the maximum number of ATAPI CDROM drives supported by the BIOS. Exit Menu To access this menu, select Exit from the menu bar Boot Exit The menu represented in Table 35 is for exiting the BIOS Setup program, saving changes, and loading and saving defaults. Table 35
  • Intel S845WD11U | Product Guide - Page 80
    80 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 81
    4 Solving BIOS Problems The board reports POST errors in two ways: • By sounding a beep code • By displaying an error message on the monitor BIOS Beep Codes The BIOS beep codes are listed in Table 36. The BIOS also issues a beep code (one long tone followed by two short tones) during POST if the
  • Intel S845WD11U | Product Guide - Page 82
    a recoverable error occurs during the POST, the BIOS displays an error message describing the problem (see Table 37). Table 37. BIOS Error Messages Error Message Explanation GA20 Error Pri Master Error Keyboard interface test failed. continued 82 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 83
    cleared. The system should be powered down and the jumper removed. Pressed CMOS is ignored and NVRAM is cleared. User must enter Setup. Solving BIOS Problems 83
  • Intel S845WD11U | Product Guide - Page 84
    84 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 85
    US $25.00 per incident, levied in local currency at the applicable credit card exchange rate plus applicable taxes. (Intel reserves the right to change the pricing for telephone support at any time without notice). In U.S. and Canada 1-800-404-2284 In Europe UK France Germany Italy Spain 0870
  • Intel S845WD11U | Product Guide - Page 86
    86 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 87
    6 Technical Reference Server Board Connectors CAUTION Many of the baseboard and front panel connectors provide operating voltage (+5 V DC and +12 V DC, for example) to devices inside the server chassis, such as fans and internal peripherals. These connectors are not overcurrent protected. Do not use
  • Intel S845WD11U | Product Guide - Page 88
    2 34 1 33 F E D A. PCI slot 3 B. PCI slot 2 C. PCI slot 1 D. Diskette drive E. Primary IDE F. Secondary IDE Figure 16. Add-in Board and Peripheral Interface Connectors OM14349 88 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 89
    64 KB 64 KB 96 KB 160 KB 1 KB 127 KB 512 KB Description Extended memory Runtime BIOS Reserved Available high DOS memory (open to the PCI bus) Video memory and BIOS Extended BIOS data (movable by memory manager software) Extended conventional memory Conventional memory DMA Channels Table 39. DMA
  • Intel S845WD11U | Product Guide - Page 90
    (8514A) COM2 Secondary IDE channel command port Secondary IDE channel status port LPT1 Intel 82845 MCH Intel 82845 MCH COM3 Diskette channel 1 Diskette channel 2 Primary IDE channel command port data register Primary bus master IDE registers continued 90 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 91
    divisible boundary ICH2 (SMBus) 4096 contiguous bytes starting on a Intel 82801BA PCI bridge 4096-byte divisible boundary 96 contiguous bytes ) portion of the ICH2 component. The APIC is supported in Windows† 2000 Server and Windows XP and supports a total of twenty-four interrupts. Table 41.
  • Intel S845WD11U | Product Guide - Page 92
    available (through PIRQG) ICH2 USB controller 2/User available (through PIRQH) Notes: 1. Default, but can be changed to another IRQ. 2. Available in APIC mode only. 92 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 93
    ® host system. For information on compatible host system(s) refer to Intel's Server Builder website or contact your local Intel representative. • FCC (Class A Verification) - Radiated & Conducted Emissions (USA) • ICES-003 (Class A) - Radiated & Conducted Emissions (Canada) • CISPR 22, 3rd Edition
  • Intel S845WD11U | Product Guide - Page 94
    (2) this device must accept any interference received, including interference that may cause undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation 5200 N.E. Elam Young Parkway Hillsboro, OR 97124 1-800-628-8686 94
  • Intel S845WD11U | Product Guide - Page 95
    . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Intel S845WD11U | Product Guide - Page 96
    the chassis • Hot components (like processors, voltage regulators, and heat sinks) • Damage to wires that could cause a short circuit Observe all warnings and cautions that instruct you to refer computer servicing to qualified technical personnel. 96 Intel Server Board S845WD1-E Product Guide
  • Intel S845WD11U | Product Guide - Page 97
    and adhere to all of these instructions and the instructions supplied with the chassis and associated modules. If the instructions for the chassis are inconsistent with these instructions or the instructions for associated modules, contact the supplier's technical support to find out how you can
  • Intel S845WD11U | Product Guide - Page 98
    98 Intel Server Board S845WD1-E Product Guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Intel
®
Server Board S845WD1-E
Product Guide
A Guide for Technically Qualified Assemblers of Intel
®
Identified
Subassemblies/Products
Order Number:
A88885-002