Intel SC5295UPNA User Manual

*D13317-001*

D13317-001

Intel® Server Board Guide

Intel® Server Board

Product Code

SE7230NH1-E

SE7320EP2, SE7520BD2

SE7525RP2

SE7320EP2, SE7520BD2

SC5295UP

SC5295DP

SC5295WS

SC5295BRP

Tools Required

Anti-static

wrist strap

Phillips*

screwdriver

Caution

Observe normal ESD

(Electrostatic Discharge)

procedures during

system integration to avoid

possible damage to server board

and/or other components.

Installation and service

of this product to be

performed only by

qualified service personnel to

avoid risk of injury from

electrical shock or energy hazard.

Warning

Warning

Read all caution and safety statements in this document before performing any of the instructions. Also see the

Intel

®

Server Board and Server

Chassis Safety Information

document at:

http://support.intel.com/support/motherboards/server/sb/cs-010770.htm

for complete safety information.

Thank you for buying the Intel

®

Entry Server Chassis SC5295-E.

The following information will help you to prepare your chassis

for integration with your selected Intel

®

Server Board.

These guides and other supporting documents (including

a list of supported server boards) are located on the web at

http://support.intel.com/support/motherboards/server

.

If you are not familiar with ESD (Electrostatic Discharge) procedures used during system

integration, please see the Intel

®

Entry Server Chassis SC5295-E User Guide, available on

the CD or at

http://support.intel.com/go/serverbuilder.

Intel

®

Entry Server Chassis SC5295-E

UP/DP/WS/BRP

Quick Start User's Guide

Building Value With Intel

Server Products, Programs and Support

Get the high-value server solutions you need by

taking advantage of the outstanding value Intel

provides to system integrators:

• High-quality server building blocks

• Extensive breadth of server building blocks

• Solutions and tools to enable e-Business

• Intel

®

Server Management

• Comprehensive training services

• Worldwide 24x7 technical support

[AT&T Country Code + 866-655-6565]

1

• World-class service, including a three-year

limited warranty and Advanced Warranty

Replacement

1

• Product information, including product

briefs and technical product

specifications

• Sales tools, such as videos and

presentations

• Training information, such as the Intel

®

Online Learning Center

• Support Information and much more

Intel

®

ServerBuilder is your one-stop shop

for information about all of Intel's Server

Building Blocks such as:

For more information on Intel's added-value

server offerings, visit the Intel

®

ServerBuilder

website at:

www.intel.com/go/serverbuilder

1

Available only to Intel

®

Channel Program

Members, part of the Intel

®

e-Business Network.

Preliminary Draft

Intel is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. * Other names and brands may be claimed as the property of others. Copyright © 2005, Intel Corporation. All rights reserved.

8

Install Server Board

Large

Duct

Note: Save these

screws.

Small Duct

1

2

Server

Board

Tab

engages

here

Remove the small duct (one screw).

1

Remove the large duct (two screws).

2

Part A: Remove CPU Ducts

Note: The SC5295UP version of the Entry Server Chassis

SC5295-E does NOT have any CPU ducts to remove or

install. You will only need to remove and install CPU ducts

IF you have a SC5295DP, SC5295WS, or SC5295BRP.

Note: The CPU ducts must be removed prior to

installing the server board.

Part B: Install Server Board

Open the Intel

®

Server Board box. Follow the

instructions in the enclosed Intel

®

Server

Board Quick Start User's Guide and return

to this document when finished.

Use the mounting screws, bumpers and

standoffs (if necessary) that came with your

chassis to secure the server board to

the chassis.

See your Intel® Server Board Quick Start

User's Guide for server board installation

instructions and installation of the back panel

I/O shield.

Part C: Install CPU Ducts

Lower the large CPU duct into chassis and line

up with two mounting holes in chassis.

Note: Tab on small CPU duct must engage

corresponding opening in large CPU duct.

3

Lower the small CPU duct into chassis and line

up with mounting hole in chassis.

4

Attach to chassis using the single screw you

saved from Part A.

1

Attach to chassis using the two screws you saved

from Part A.

2

Only required for Intel

®

Server Boards

SE7320EP2 and SE7525RP2:

DO NOT USE with a Passive Thermal Solution or the

Intel

®

Workstation Cooling Kit.

This duct should only

be used with Active

Thermal Solutions.

7

Remove PCI Card Guide

1

2

Press in on two blue

tabs.

1

Pull PCI Card Guide

outward and

remove from

chassis.

2

6

Remove System Fan

1

1

Press two bracket tabs outward and remove

system fan.

1

5

Install Floppy Drive

3

4

1

2

5

3

Insert floppy drive into Device Bay

until it is in position.

2

Move latch to "unlock" position.

1

Remove the EMI Shield from

the 3.5-in Device Drive Bay.

5

Connect power and data cables to

the rear of the floppy drive.

4

Move latch to the "lock" position.

4

Install CD-ROM or DVD-ROM Drive

3

4

1

2

5

3

Insert CD-ROM or DVD-ROM drive

into Device Drive Bay until it is

in position.

2

Move latch to the "unlock" position.

1

Remove the EMI Shield from the

5.25-in Device Drive Bay.

5

Connect power and data cables to

the rear of the CD-ROM or DVD-ROM

drive.

4

Move latch to the "lock" position.

3

Remove Hard Drive Cage

4

3

2

1

3

Push the blue plastic

release mechanism

upward to unlatch the

hard drive cage.

2

Remove shipping screw.

1

Loosen thumb screw and remove

hard drive cage EMI shield.

Once released, pull the

hard drive cage out of the

chassis.

4

2

Remove Front Bezel Assembly

3

Disengage three bezel clips that attach the right side

of the bezel to the right side of the chassis and remove.

2

Rotate left side of front bezel assembly outward slightly.

1

Disengage two bezel tabs from leftside of chassis.

2

3

1

1

3

3

1

Remove Side Cover

1

2

Remove two shipping screws.

Push in latch.

3

Slide side cover rearward and remove.

2

3

1

1

Intel SC5295UPNA User Manual

Intel SC5295UPNA Manual

Intel SC5295UPNA manual content summary: