Intel SC5400BRP User Manual

Intel SC5400BRP Manual

Get Intel SC5400BRP PDF manuals and user guides View all Intel SC5400BRP manuals
Add to My Manuals
Save this manual to your list of manuals

Intel SC5400BRP manual content summary:

  • Intel SC5400BRP | User Manual - Page 1
    Intel® Server Chassis SC5400 User's Guide A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/ Products Intel Order Number D38435-005
  • Intel SC5400BRP | User Manual - Page 2
    are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. * Other names and brands may be claimed as the property of others. Copyright © 2006 - 2007, Intel Corporation. All Rights Reserved ii Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 3
    de este documento antes de realizar cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety Information en el Intel® Server Deployment Toolkit CD y/o en http://support.intel.com/ support/motherboards/server/sb/cs-010770.htm. iii Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 4
    edges. After removing a board from its protective wrapper or from the server, place the board component side up on a grounded, static free surface. Use a conductive foam pad if available but not the board wrapper. Do not slide board over any surface. iv Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 5
    the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board. Intel® Server Chassis SC5400 User's Guide v
  • Intel SC5400BRP | User Manual - Page 6
    vi Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 7
    components you may need, troubleshooting information, and instructions on how to add and replace components on the Intel® Server Chassis SC5400. For the latest version of this manual, see http:// support.intel.com/support/motherboards/server/chassis/SC5400/. Manual Organization Chapter 1 provides
  • Intel SC5400BRP | User Manual - Page 8
    which accessories, memory, processors, and third-party hardware have been tested and can be used with your board, and for ordering information for Intel products, see http://support.intel.com/support/motherboards/server/chassis/SC5400/ compat.htm. viii Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 9
    ® Server Chassis SC5400 Technical Product Specification Intel® Server Chassis SC5400 Quick Start User's Guide in the product box A link to the SMaRT Tool is available under "Other Resources" at the right side of the screen at: http://support.intel.com/support/motherboards/server/chassis/ SC5400
  • Intel SC5400BRP | User Manual - Page 10
    x Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 11
    Removing the Processor and Memory Air Ducts 20 Installing the Processor and Memory Air Ducts 21 Replacing a Fixed Fan (Intel® Server Chassis SC5400Base SC5400BRP only) ........23 Removing and Installing Hot Swap Fans (Intel® Server Chassis SC5400LX or Intel® Server Chassis SC5400 User's Guide xi
  • Intel SC5400BRP | User Manual - Page 12
    -W Single Power Supply Output Voltages 64 System Environmental Specifications 64 Current Usage ...65 Calculating Power Usage 65 Appendix A: Getting Help 67 World Wide Web ...67 Telephone ...67 Appendix B: Regulatory and Compliance Information 71 xii Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 13
    Server 93 Sicherheitshinweise und Vorsichtsmaßnahmen 93 Zielbenutzer der Anwendung 94 Standortauswahl ...94 Handhabung von Geräten 94 Warnungen zu Netzspannung und Elektrizität 95 Warnhinweise für den Systemzugang 96 Warnhinweise für Racks 97 Intel® Server Chassis SC5400 User's Guide xiii
  • Intel SC5400BRP | User Manual - Page 14
    sur l'accès au système 102 Avertissements sur le montage en rack 102 Décharges électrostatiques (ESD 103 Autres risques ...103 Información Assembly Safety Instructions 117 English ...117 Deutsch ...119 Français ...122 Español ...124 Italiano ...126 xiv Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 15
    Cage 39 Figure 38. Tightening Captive Screw 39 Figure 39. Routing Power Cables to Fixed Drives 40 Figure 40. Routing SAS/SATA Data Cables 41 Figure 41. Releasing Drive Carrier from Hot Swap Cage 42 Figure 42. Removing Hard Drive from Drive Carrier 42 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 16
    Removing Center Divider 55 Figure 60. Removing Power Distribution Board 56 Figure 61. Securing Power Distribution Board to Power Supply Cage 57 Figure 62. Re-installing Center Divider 58 Figure 63. Installing Hot Swap Power Supply into Chassis 58 xvi Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 17
    64 Table 8. Environmental Specifications 64 Table 9. Power Usage Worksheet 65 Table 10. Power Usage Worksheet 2 66 Table 11. Product Regulatory Compliance Markings 72 Table 12. Product Ecology Compliance Markings 78 Table 13. Other Markings ...80 Intel® Server Chassis SC5400 User's Guide xvii
  • Intel SC5400BRP | User Manual - Page 18
    xviii Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 19
    of the Intel® Server Chassis SC5400. This chapter provides a list of the server chassis features, as well as diagrams showing the location of important components and connections on the server chassis. AF000551 Figure 1. Intel® Server Chassis SC5400 Intel® Server Chassis SC5400 User's Guide 1
  • Intel SC5400BRP | User Manual - Page 20
    1 summarizes the features of the Intel® Server Chassis SC5400 Base SKU Table 1. Server Chassis Features (BASE SKU) Feature Dimensions Hard Drives Peripherals Control Panel (dependent on option selected) LEDs and displays (dependent on option selected) Power Supply Fans USB 2.0 Video Description
  • Intel SC5400BRP | User Manual - Page 21
    2 summarizes the features of the BRP SKU. Table 2. Server Chassis Features (BRP SKU) Feature Dimensions Hard Drives Peripherals Control Panel (dependent on option selected) LEDs and displays (dependent on option selected) Power Supply Fans USB 2.0 Video Description • 16.6 inches high (Pedestal
  • Intel SC5400BRP | User Manual - Page 22
    hot-swap, redundant chassis fans: • Two 120-mm fans • Two 92-mm fans • Two front panel USB ports with Front Control Panel • Four back panel USB ports • One front panel video port (available only with Standard Control Panel) • One rear panel video port 4 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 23
    Table 3 summarizes the features of the SC5400LXi SKU Table 4. Server Chassis Features (LXi SKU) Feature Dimensions Hard Drives Peripherals Control Panel (dependent on option selected) LEDs and displays (dependent on option selected) Power Supply Fans USB 2.0 Video Description • 16.6 inches high (
  • Intel SC5400BRP | User Manual - Page 24
    F. Fixed Fans (2) G. Hard Disk Drive Cage Release Mechanisms (2) H. Front Panel Controls I. 5.25-inch Device Bays J. Front Panel USB/Serial B K. Fixed Drive Cage 4-Drive (accessory) L. Fixed Drive Cage 6-Drive Figure 2. Internal Component Locations 6 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 25
    D E H I TP00701 A. ID Toggle Switch B. Reset Button C. NIC 1 Activity LED (green) D. Power Button E. Hard Drive Activity LED (green) F. NIC2 Activity LED (green) G. ID LED (blue) H. Status LED (bi-color) I. NMI Button Figure 3. Front Control Panel Intel® Server Chassis SC5400 User's Guide 7
  • Intel SC5400BRP | User Manual - Page 26
    missing Hard drive activity Green Green Blue On Blink Off On Blink Off Blink Off Linked LAN activity Idle Linked LAN activity Idle Server identification; toggled by ID button or software Server identification; toggled by ID button or software 8 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 27
    server board. A B C D E AF000955 Callout A. B. C. D. E. Function LCD display (variable content) LCD up navigation button LCD down navigation button LCD backup level navigation button LCD command enter button Figure 4. Intel® Local Control Panel Features Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 28
    (optional) G. AC Power Connector TP00526 B. I/O Ports D. PCI Card Latch F. Knockout Note: I/O connectors vary, depending on the server board installed. See your server board documentation for port identification. Figure 5. Server Chassis Back 10 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 29
    , or a DVD-ROM drive. The drives must be purchased separately. The following figure shows the available options. A B C A. Slimline floppy drive / DVD-ROM drive / CD-ROM drive B. USB ports (2) C. Hard drive bays Figure 6. Optional Peripherals AF000552 Intel® Server Chassis SC5400 User's Guide 11
  • Intel SC5400BRP | User Manual - Page 30
    available. For instructions on installing hard drives, see "Removing and Installing Hot Swap Drive(s)" on page 42. Note: Drives can consume up to 17 watts of power each. Drives must be specified to run at a maximum ambient temperature of 45C. The Intel® Server Chassis SC5400 does not support all SAS
  • Intel SC5400BRP | User Manual - Page 31
    from the bottom, and so on. Instructions for installing your chassis into a rack are included in the rail kit. The order numbers are as follows: • Tool-less Rail Kit: ARIGRACK • Cable Management Arm: AXXRACKCARM (requires the tool-less rail kit) Intel® Server Chassis SC5400 User's Guide 13
  • Intel SC5400BRP | User Manual - Page 32
    14 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 33
    and conductive foam pad (recommended) System References All references to left, right, front, top, and bottom assume the reader is facing the front of the chassis as it would be positioned for normal operation. Intel® Server Chassis SC5400 User's Guide 15
  • Intel SC5400BRP | User Manual - Page 34
    the Chassis Cover Removing the Chassis Cover The Intel® Server Chassis SC5400 must be operated with the top cover in place to ensure proper cooling. You will need to remove the top cover to add or replace components inside of the platform. Before removing the top cover, power down the server and
  • Intel SC5400BRP | User Manual - Page 35
    chassis. 2. Latch the cover securely to the chassis. 3. If the chassis will be re-shipped, secure the chassis cover to the chassis with the access cover screw (see letter "A" in the following figure). A A Figure 8. Installing the Chassis Cover AF000572 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 36
    letter "C"). 7. If the bezel assembly does not immediately disconnect from the chassis, tap the left-hand side of the bezel assembly to disengage the bezel hooks on the right-hand side of the chassis. A C A B AF000557 Figure 9. Removing the Front Bezel 18 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 37
    Bezel (Pedestal Only) Caution: This step applies to a pedestal configuration chassis only. For instructions on installing a bezel in a rack-mount configuration, refer to the Rack Conversion kit Installation Guide: Intel® Server Chassis SC5400. 1. Open the outer bezel door of the bezel assembly (see
  • Intel SC5400BRP | User Manual - Page 38
    server board (see letter "A" in the following figure). 5. Detach the memory air duct from the processor air duct (see letter "B"). 6. Remove the processor air duct (see letter "C"). A B C AF000321 Figure 11. Removing the Processor and Memory Air Ducts 20 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 39
    into the chassis slots. 3. Install the memory air duct next by holding the large tab-end of the memory air duct at a downward angle and then inserting the large tab (see letter "C") from the underside into the matching slot on the processor air duct. Intel® Server Chassis SC5400 User's Guide 21
  • Intel SC5400BRP | User Manual - Page 40
    A A B D C D E E A 1 2 AF000325 Figure 13. Installing the Processor and Memory Air Ducts Caution: The processor air duct interlocks with the memory air duct in two places before latching into place. Note: Use care to avoid pinching the cables. 22 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 41
    Replacing a Fixed Fan (Intel® Server Chassis SC5400Base SC5400BRP only) Note: This procedure applies only to the Intel® Server Chassis SC5400 BASE and Intel® Server Chassis SC5400BRP configurations. The Intel® Server Chassis SC5400LX and SC5400LXi ship with hot-swap fans. 1. Observe the safety and
  • Intel SC5400BRP | User Manual - Page 42
    the Intel® Server Chassis SC5400LX and SC5400LXi configurations. The Intel® Server Chassis SC5400 BASE and Intel® Server Chassis SC5400BRP configurations ship with fixed fans. The hot-swap fans from the Intel® Server Chassis SC5300LX cannot be used in the Intel® Server Chassis SC5400LX or SC5400LXi
  • Intel SC5400BRP | User Manual - Page 43
    the Intel® Server Chassis SC5400LX or SC5400LXi configurations. The Intel® Server Chassis SC5400 BASE and Intel® Server Chassis SC5400BRP configurations ship with fixed fans. The hot-swap fans from the Intel® Server Chassis SC5300 LX cannot be used in the Intel® Server Chassis SC5400LX or SC5400LXi
  • Intel SC5400BRP | User Manual - Page 44
    the slimline combo drive tray by pulling the slides away from the tray (see letter "B"). A gentle pull should release the slide from the side dimple on the drive tray. A A B B AF000575 Figure 17. Removing Slide/Drive Assembly from Upper Device Bay 26 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 45
    . For instructions, see "Removing the Chassis Cover" on page 16. 4. Remove the front bezel if it is installed. For instructions, see "Removing and Installing the Front Bezel" on page 18. 5. Disconnect the power and data cables to the DVD/CD-ROM drive. Intel® Server Chassis SC5400 User's Guide 27
  • Intel SC5400BRP | User Manual - Page 46
    , see "Removing and Installing the Front Bezel" on page 18. 9. Install the chassis cover. For instructions, see "Installing the Chassis Cover" on page 17. 10. Plug all peripheral devices and the AC power cable into the server. 11. Power up the server. 28 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 47
    20. Removing EMI Shield/Slide Assembly from Upper Device Bay 6. Attach slides to the DVD or CD-ROM drive by pressing the slides firmly into the side dimples on the DVD or CD-ROM drive. AF000576 Figure 21. Attaching Slides to a DVD or CD-ROM Drive Intel® Server Chassis SC5400 User's Guide 29
  • Intel SC5400BRP | User Manual - Page 48
    the drive cage. Note: As an alternative, you may also fully remove the drive cage from its drive bay slot in the chassis. Take care, however, to position the drive cage horizontally before opening the drive cage doors or the drive rails will spill out. 30 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 49
    22. Removing Six-drive Fixed Drive Cage from Chassis 8. Loosen the thumb screw (see letter "A" in the following figure). Open the upper door of the drive cage (see letter "B"). B A AF000579 Figure 23. Unlocking and Opening Upper Door of Fixed Drive Cage Intel® Server Chassis SC5400 User's Guide 31
  • Intel SC5400BRP | User Manual - Page 50
    9. Open the lower door. AF000946 Figure 24. Opening Lower Door of Fixed Drive Cage 10. Remove the drive/slide assembly from the drive cage. AF000588 Figure 25. Removing Drive/Slide Assembly from Drive Cage 32 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 51
    hard drive. If not replacing hard drive, insert empty device slides into drive cage. AF000947 Figure 26. Inserting Empty Device Slides into Drive Cage 12. Close the lower door of drive cage. AF000948 Figure 27. Closing Lower Door of Fixed Drive Cage Intel® Server Chassis SC5400 User's Guide 33
  • Intel SC5400BRP | User Manual - Page 52
    , see "Removing and Installing the Front Bezel" on page 18. 18. Install the chassis cover. For instructions, see "Installing the Chassis Cover" on page 17. 19. Plug all peripheral devices and the AC power cable into the server. 20. Power up the server. 34 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 53
    the drive cage from its drive bay slot in the chassis. Take care, however, to position the drive cage horizontally before opening the drive cage doors or the drive rails will spill out. A B TP00906 Figure 30. Removing Six-drive Fixed Drive Cage from Chassis Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 54
    captive screw (see letter "A" in the following figure). Open the upper door (see letter "B"). B A AF000579 Figure 31. Unlocking and Opening Upper Door of Fixed Drive Cage 7. Open the lower door. AF000580 Figure 32. Opening Lower Door of Fixed Drive Cage 36 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 55
    holes on hard drive. Press firmly to secure device slides to hard drive. Ensure that the metal tabs on the device slides are facing the front of the hard drive and facing towards each other. AF000582 Figure 34. Attaching Device Slides to Hard Drive Intel® Server Chassis SC5400 User's Guide 37
  • Intel SC5400BRP | User Manual - Page 56
    Figure 35. Inserting Drive/Slide Assembly into Drive Cage 11. Repeat above steps for installation of additional hard drives into the drive cage. 12. Close the lower door of drive cage. . AF000584 Figure 36. Closing Lower Door of Fixed Drive Cage 38 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 57
    , see "Removing and Installing the Front Bezel" on page 18. 18. Install the chassis cover. For instructions, see "Installing the Chassis Cover" on page 17. 19. Plug all peripheral devices and the AC power cable into the server. 20. Power up the server. Intel® Server Chassis SC5400 User's Guide 39
  • Intel SC5400BRP | User Manual - Page 58
    and upper device bay. Power Cable Routing Guidelines: • P3, P4 and P5 power cables route to removable drives. • P6, P7, P8, P9, P10 and P11 power cables (standard SAS/SATA); route as appropriate. • P12 and P13 power cables (SATA); route as appropriate. 40 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 59
    by the factory. SAS or SATA cables are supplied with the server board and hot-swap drive accessory kits. No cables are supplied with the fixed drive bay kit. • Route SAS/SATA data cables through the chassis openings located near the bottom of the drive cage. • Connect data cables to the respective
  • Intel SC5400BRP | User Manual - Page 60
    drive cage. AF000593 Figure 41. Releasing Drive Carrier from Hot Swap Cage 2. Remove the four screws securing the hard drive to the drive carrier. Remove the hard drive from the drive carrier. AF000595 Figure 42. Removing Hard Drive from Drive Carrier 42 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 61
    Baffle in Drive Carrier 4. With the black lever open, insert the drive carrier into the drive cage. Once inserted, rotate the black lever upwards to latch the drive carrier into position. AF000592 Figure 44. Inserting Drive Carrier into Hot Swap Cage Intel® Server Chassis SC5400 User's Guide 43
  • Intel SC5400BRP | User Manual - Page 62
    carrier using the four screws that were formerly attached to the plastic air baffle. Ensure that the connector end of the hard drive is facing the back of the drive carrier. The label side of the hard drive should be facing up in the drive carrier. 44 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 63
    Drive Carrier into Hot Swap Cage Removing and Installing PCI Add-in Board(s) Removing PCI Add-in Board(s) Caution: When removing a full-length add-in card, you must pull back the latch on the plastic card guide at the front of the chassis the chassis. Intel® Server Chassis SC5400 User's Guide 45
  • Intel SC5400BRP | User Manual - Page 64
    Open the back panel PCI add-in card retention device (see letter "B") by pressing open from the inside of the chassis. A A B AF000600 Figure 49. Preparing Chassis for Removal of PCI Add-in Board 46 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 65
    devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover" on page 16. 4. Remove the front bezel if it is installed. For instructions, see "Removing and Installing the Front Bezel" on page 18. Intel® Server Chassis SC5400 User's Guide 47
  • Intel SC5400BRP | User Manual - Page 66
    not already been removed, by pushing the shield out from the inside of the chassis A A B C AF000954 Figure 50. Preparing Chassis for Addition of PCI Add-in Board 6. Remove the PCI add-in board from the board according to the manufacturer's instructions. 48 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 67
    slot on the server board (see letter "A" in the following figure). Close the back panel PCI add-in card retention device (see letter "B"). A B AF000599 Figure 51. Installing Add-in Board 8. Repeat steps 2-10 until all the PCI add-in cards are installed. Intel® Server Chassis SC5400 User's Guide 49
  • Intel SC5400BRP | User Manual - Page 68
    , see "Removing and Installing the Front Bezel" on page 18. 12. Install the chassis cover. For instructions, see "Installing the Chassis Cover" on page 17. 13. Plug all peripheral devices and the AC power cable into the server. 14. Power up the server. 50 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 69
    Supply Filler Panel 2. Insert the power supply module until it clicks into place. Secure with screw (see letter "A" in the following figure) if shipping chassis to another location. A AF000603 Figure 54. Installing Additional Hot Swap Power Supply Module Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 70
    power supply into chassis. Replace shipping screw (see letter "A" in the following figure) if shipping chassis to another location. A AF000603 Figure 56. Installing Hot Swap Power Supply into Chassis 4. Connect power cable to replaced power supply. 52 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 71
    power cables to other chassis components as appropriate. 10. Install the chassis cover. For instructions, see "Installing the Chassis Cover" on page 17. 11. Plug all peripheral devices and the AC power cable into the server. 12. Power up the server. Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 72
    power supply from chassis. Repeat this step for the second hot swap power supply if one is installed. A B AF000956 Figure 58. Removing Hot Swap Power Supply from Chassis 6. Disconnect all internal power cables from chassis components and server board. 54 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 73
    of the center divider at a downward angle, disengage tabs from chassis wall by pushing center divider up and sideways (see letter "C"). Remove center divider from power supply cage (see letter "D"). A B C D Figure 59. Removing Center Divider TP00696 Intel® Server Chassis SC5400 User's Guide 55
  • Intel SC5400BRP | User Manual - Page 74
    have to feed the power cables through the power supply cage while removing the power distribution board. B A C TP00698 Note: Cables on back of power distribution board not shown to clarify insertion process. Figure 60. Removing Power Distribution Board 56 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 75
    to Power Supply Cage 10. Connect the P1, P14, and P16 cables to the server board. See the Intel® server board Quick Start User's Guide or User Guide for appropriate connection locations. 11. Reconnect power cables to other chassis components as appropriate. Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 76
    Divider TP00843 13. Insert hot swap power supply(ies) into chassis. Replace shipping screw(s) (see letter "A" in the following figure) if shipping chassis to another location. A AF000603 Figure 63. Installing Hot Swap Power Supply into Chassis 58 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 77
    , see "Removing and Installing the Front Bezel" on page 18. 11. Install the chassis cover. For instructions, see "Installing the Chassis Cover" on page 17. 12. Plug all peripheral devices and the AC power cable into the server. 13. Power up the server. Intel® Server Chassis SC5400 User's Guide 59
  • Intel SC5400BRP | User Manual - Page 78
    "Installing the Front Bezel (Pedestal Only)" on page 19. 12. Re-install the chassis cover. For instructions, see "Installing the Chassis Cover" on page 17. 13. Plug all peripheral devices and the AC power cable into the server. 14. Power up the server. 60 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 79
    Cables from Server Board(s) 1. If your server has a hot swap power supply, remove the cables (that route toward the server board) to the chassis. 2. See your Intel® Server Board User Guide or Quick Start User's Guide for cable connection locations. Intel® Server Chassis SC5400 User's Guide 61
  • Intel SC5400BRP | User Manual - Page 80
    62 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 81
    slots on the server board are rated for no more than 25 Watts for any one slot. The average current usage per slot should not exceed 13 Watts. 830-W Single Power Input Voltages • 100-127 V∼at 50/60 Hz; 14 A max. • 200-240 V∼at 50/60 Hz; 8 A max. Intel® Server Chassis SC5400 User's Guide 63
  • Intel SC5400BRP | User Manual - Page 82
    Exceeding a combined 170 Watts will overload the power subsystem and may cause the power supplies to overheat and malfunction. The expansion slots on the server board are rated for no more than 25 Tested to 15 kilovolts (kV); no component damage. 64 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 83
    Hard Drive 2nd Hard Drive 3rd Hard Drive 4th Hard Drive 5th Hard Drive 6th Hard Drive Expansion Board 1 Expansion Board 2 Expansion Board 3 Expansion Board 4 Expansion Board 5 Expansion Board 6 Intel® Remote Management Module Control Panel Total Current Intel® Server Chassis SC5400 User's Guide 65
  • Intel SC5400BRP | User Manual - Page 84
    Watts for each voltage level Caution: Do not exceed a combined power output of 170 Watts for the +5 V and +3.3 V outputs. Exceeding a combined 170 Watts will overload the power subsystem and may cause the power supplies to overheat and malfunction. 66 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 85
    must adhere to the assembly instructions in this guide to ensure and maintain compliance make sure that the server system, power supply, and other modules have passed EMC testing using a server board with a microprocessor may require further evaluation. Intel® Server Chassis SC5400 User's Guide 71
  • Intel SC5400BRP | User Manual - Page 86
    references Server Chassis Compliance and markings that may appear on the product. Markings below are typical markings however, may vary or be different based on ) GB 9254 (Emissions) GB17625 (Harmonics) CANADA ICES-003 CLASS A CANADA NMB-003 CLASSE A 72 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 87
    International CB Certification IEC60950 CISPR 22 / CISPR 24 None Required Japan VCCI Certification Korea RRL Certification MIC Notice No. 1997-41 (EMC) & 1997-42 (EMI) Intel® Server Chassis SC5400 User's Guide 73
  • Intel SC5400BRP | User Manual - Page 88
    Russia Ukraine Compliance Reference GOST-R Certification GOST R 2921691 (Emissions) GOST R 5062895 (Immunity) Ukraine Certification Compliance Reference Marking Example None Required Taiwan BSMI CNS13438 R33025 74 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 89
    related to the EMC performance of this product, contact: Intel Corporation 5200 N.E. Elam Young Parkway Hillsboro, OR 97124-6497 not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However Intel® Server Chassis SC5400 User's Guide 75
  • Intel SC5400BRP | User Manual - Page 90
    the preceding notice: This is a Class A product based on the standard of the Voluntary Control Council for Interference instruction manual. BSMI (Taiwan) The BSMI Certification Marking and EMC warning is located on the outside rear area of the product. 76 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 91
    area of the product. Product Ecology Compliance Intel has a system in place to restrict the use of banned substances in accordance with world wide product ecology regulatory requirements. The following is Intel's product ecology compliance criteria. Intel® Server Chassis SC5400 User's Guide 77
  • Intel SC5400BRP | User Manual - Page 92
    of Regulations, Title 22, Division 4.5; Chapter 33: Best Management Practices for Perchlorate Materials. This product / part includes a battery which contains Perchlorate material. None Required 78 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 93
    Retail Packaging Only for Boxed Boards Compliance Reference Marking Example None Required. Intel Internal Specification International All materials, parts and subassemblies must not contain restricted Applied to Retail Packaging Only for Boxed Boards Intel® Server Chassis SC5400 User's Guide 79
  • Intel SC5400BRP | User Manual - Page 94
    power supply cords before servicing. Simplified Chinese 2 Traditional Chinese 2 German: Dieses Geräte hat mehr als ein Stromkabel. Um eine Gefahr des elektrischen Schlages zu verringern trennen sie beide (2) Stromkabeln bevor Instandhaltung 80 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 95
    for the region in which it is sold. • Peripheral Storage Devices: must be a UL recognized or UL listed accessory and TUV or VDE licensed. Total server configuration is not to exceed the maximum loading conditions of the power supply. Intel® Server Chassis SC5400 User's Guide 81
  • Intel SC5400BRP | User Manual - Page 96
    End-of-Life / Product Recycling Product recycling and end-of-life take-back systems and requirements vary by country. Contact the retailer or distributor of this product for information about product recycling and / or take-back. 82 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 97
    . 5. Provide some electrostatic discharge (ESD) protection by wearing an antistatic wrist strap attached to chassis ground of the system-any unpainted metal surface-when handling components. 6. Do not operate the system with the chassis covers removed. Intel® Server Chassis SC5400 User's Guide 117
  • Intel SC5400BRP | User Manual - Page 98
    the equipment manufacturer. Dispose of used batteries according to manufacturer's instructions. The system is designed to operate in a typical office environment the power supply cord(s), because they serve as the product's main power disconnect. 118 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 99
    , um elektrostatische Ladungen (ESD) über blanke Metallstellen bei der Handhabung der Komponenten zu vermeiden. 6. Schalten Sie das System niemals ohne ordnungsgemäß montiertes Gehäuse ein. Intel® Server Chassis SC5400 User's Guide 119
  • Intel SC5400BRP | User Manual - Page 100
    . Die Batterie darf nur durch denselben oder einen entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt werden. Entsorgen Sie verbrauchte Batterien den Anweisungen des Herstellers entsprechend. 120 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 101
    ; • "über ausreichend Platz verfügen, um Zugang zu den Netzkabeln zu gewährleisten, da der Stromanschluß des Produkts hauptsächlich über die Kabel unterbrochen wird Intel® Server Chassis SC5400 User's Guide 121
  • Intel SC5400BRP | User Manual - Page 102
    à l'arrière du système, déverrouillez-le et retirez-le. 2. Retirez toutes les vis des panneaux et mettez-les dans un endroit sûr. 3. Retirez les panneaux. Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 103
    type ou d'un type équivalent recommandé par le fabricant. Disposez des piles usées selon les instructions du fabricant. Le système a été conçu pour fonctionner dans un cadre de travail normal. ci étant le seul moyen de mettre le système hors tension). Intel® Server Chassis SC5400 User's Guide 123
  • Intel SC5400BRP | User Manual - Page 104
    bloqueo de seguridad de la parte posterior del sistema, si se ha instalado uno. 2. Extraiga y guarde todos los tornillos de las tapas.Extraiga las tapas. Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 105
    tierra correctamente instalada. • "Provisto de espacio suficiente como para acceder a los cables de alimentación, ya que éstos hacen de medio principal de desconexión del sistema. Intel® Server Chassis SC5400 User's Guide 125
  • Intel SC5400BRP | User Manual - Page 106
    lucchetto dal retro del sistema qualora ve ne fosse uno installato. 2. Togliere e mettere in un posto sicuro tutte le viti delle coperture. 3. Togliere le coperture. Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 107
    di una presa a muro correttamente installata. • "Dotata di spazio sufficiente ad accedere ai cavi di alimentazione, i quali rappresentano il mezzo principale di scollegamento del sistema. Intel® Server Chassis SC5400 User's Guide 127
  • Intel SC5400BRP | User Manual - Page 108
    128 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 109
    server should be integrated and serviced only by technically qualified persons. You must adhere to the guidelines in this guide and the assembly instructions in your server manuals in serious injury or death if safety instructions are not followed. Intel® Server Chassis SC5400 User's Guide 87
  • Intel SC5400BRP | User Manual - Page 110
    hot components or surfaces. Indicates do not touch fan blades, may result in injury. Indicates to unplug all AC power cord(s) to disconnect AC power to access the power supply cord(s), because they serve as the product's main power disconnect. Equipment Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 111
    is/are the main disconnect device to AC power. The socket outlet(s) must be near the equipment and readily accessible for disconnection. • The power supply cord(s) must be plugged into socket-outlet(s) that is /are provided with a suitable earth ground. Intel® Server Chassis SC5400 User's Guide 89
  • Intel SC5400BRP | User Manual - Page 112
    accessible, and it must be labeled as controlling power to the entire unit, not just to the server(s). To avoid risk of potential electric shock, a proper safety ground must be implemented for the rack and each piece of equipment installed in it. 90 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 113
    . Dispose of batteries according to local ordinances and regulations. Do not attempt to recharge a battery. Do not attempt to disassemble, puncture, or otherwise damage a battery. Intel® Server Chassis SC5400 User's Guide 91
  • Intel SC5400BRP | User Manual - Page 114
    problems. For proper cooling and airflow, operate the system only with the chassis . • Attach the covers to the chassis according to the product instructions. Laser Peripherals or Devices Caution: To serviceable • Return to manufacturer for servicing 92 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 115
    Deutsch Sicherheitshinweise für den Server Das vorliegende Dokument bezieht sich auf Intel® Serverplatinen, Intel® Servergehäuse (Standfuß und Rack) sowie installierte Peripheriegeräte. auf Verbrennungsgefahr an heißen Bauteilen bzw. Oberflächen hin. Intel® Server Chassis SC5400 User's Guide 93
  • Intel SC5400BRP | User Manual - Page 116
    Anheben von Geräten die örtlichen Gesundheits und Sicherheitsvorschriften ein. • Verwenden Sie mechanische oder andere geeignete Hilfsmittel zum Transportieren oder Anheben von Geräten. 94 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 117
    , die nicht hot-plug-fähig sind Server ausbauen. Zur Vermeidung von Stromschlägen schalten Sie den Server aus, und trennen Sie vor dem Öffnen des Geräts das Netzkabel sowie alle an den Server angeschlossene Telekommunikationssysteme, Netzwerke und Modems. Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 118
    : War Ihr Server in Betrieb, können die installierten Prozessoren und Kühlkörper heiß sein. Sofern Sie keine Hot-Plug-Komponenten ein- oder ausbauen, warten Sie mit dem Abnehmen der Abdeckungen, bis das System abgekühlt ist. Gehen Sie beim Aus- oder 96 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 119
    Rack Server mit der Bauelementseite nach oben auf eine geerdete, statisch entladene Unterlage.Verwenden Sie dazu, sofern verfügbar, eine leitfahige Schaumstoffunterlage, aber niche die Schutzhülle der Platine. Ziehen Sie die Platine nicht über eine Fläche. Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 120
    Laser- Komponenten. • Laser-Peripheriegeräte oder -Komponenten besitzen keine für den Benutzer wartungsbedürftigen Teile. • Schicken Sie das Gerät für Wartungsarbeiten an den Hersteller zurück. 98 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 121
    Ce document s'applique aux cartes serveur Intel®, au châssis de serveur Intel® (sur pieds et sur rack) et aux périphériques installés. Vous devez suivre les informations de ce guide et les instructions d'assemblage des manuels de serveur pour vé . Intel® Server Chassis SC5400 User's Guide 99
  • Intel SC5400BRP | User Manual - Page 122
    assistance appropriée lorsque vous déplacez et soulevez le matériel. • Pour réduire le poids en vue de faciliter la manipulation, retirez tout composant amovible. 100 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 123
    cordons d'alimentation doivent répondre aux critères suivants : • Le cordon d'alimentation doit supporter une intensité supérieure à celle indiquée sur le produit. • Le cordon d'alimentation sur des prises électriques correctement reliées à la terre. Intel® Server Chassis SC5400 User's Guide 101
  • Intel SC5400BRP | User Manual - Page 124
    êtes responsable de l'installation d'un disjoncteur principal d'alimentation pour la totalité du rack. Ce disjoncteur principal doit être rapidement accessible et doit être étiqueté comme contrôlant toute l'unité, et pas uniquement le ou les serveurs. 102 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 125
    et chaque élément de l'équipement installé dans le rack doivent être correctement reliés à la terre. Décharges électrostatiques (ESD) Attention: Les sont correctement installés. • Fixez les panneaux au châssis en suivant les instructions du produit. Intel® Server Chassis SC5400 User's Guide 103
  • Intel SC5400BRP | User Manual - Page 126
    l'enceinte d'un périphérique laser. • Les périphériques laser ne sont pas réparables par l'utilisateur. • Retournez-les au fabricant en cas de problème. 104 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 127
    irse a las directrices de esta guía y a las instrucciones de montaje de los manuales del servidor para asegurar y mantener el cumplimiento con las certificaciones y homologaciones existentes de los , ya que de lo contrario se podrían producir lesiones. Intel® Server Chassis SC5400 User's Guide 105
  • Intel SC5400BRP | User Manual - Page 128
    adecuados al trasladar o levantar el equipo. • Para que el peso sea menor para manipularlo con más facilidad, extraiga los componentes que sean de fácil extracción. 106 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 129
    ón en funcionamiento. Algunas fuentes de alimentación de electricidad de los servidores de Intel utilizan el polo neutral del fuselaje. Para evitar riesgos de choques electricos use poderse efectuar de forma inmediata con el fin de desconectarlos. Intel® Server Chassis SC5400 User's Guide 107
  • Intel SC5400BRP | User Manual - Page 130
    del bastidor. Instale el equipo en el bastidor comenzando desde la parte de abajo, con el equipo más pesado en la parte inferior del bastidor. 108 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 131
    las cubiertas: • Compruebe primero que no ha dejado herramientas o piezas sueltas dentro del sistema. • Compruebe que los cables, tarjetas adicionales y otros componentes están instalados correctamente. Intel® Server Chassis SC5400 User's Guide 109
  • Intel SC5400BRP | User Manual - Page 132
    de ningún periférico o dispositivo láser • Los periféricos o dispositivos láser no pueden ser reparados por el usuario • Haga que el fabricante los repare. 110 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 133
    简体中文 Intel Intel Intel Web 注意 警告 Intel® Server Chassis SC5400 User's Guide 111
  • Intel SC5400BRP | User Manual - Page 134
    ITE ITE 场地选择 5V 112 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 135
    Intel® Server Chassis SC5400 User's Guide 113
  • Intel SC5400BRP | User Manual - Page 136
    ESD) ESD ESD ESD ESD 114 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 137
    其他危险 替换电池 Intel® Server Chassis SC5400 User's Guide 115
  • Intel SC5400BRP | User Manual - Page 138
    116 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 139
    printed circuit board. This Limited Warranty, and any implied warranties that may exist under state law, apply only to the original purchaser of the Product. Intel® Server Chassis SC5400 User's Guide 83
  • Intel SC5400BRP | User Manual - Page 140
    damages due to external causes, including accident, problems with electrical power, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation the applicable law shall be that of the United Kingdom. 84 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 141
    (http:// www.intel.com/), call your local distributor or an Intel Customer Support representative. See "Getting Help" for telephone numbers. Returning a Defective Product Before returning any product, call your authorized dealer/distribution authority. Intel® Server Chassis SC5400 User's Guide 85
  • Intel SC5400BRP | User Manual - Page 142
    86 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 143
    pricing for telephone support at any time without notice). Before calling, fill out an Intel® Server Issue Report Form, available from the Web at http://support.intel.com/support/motherboards/server/SC5400. For the fastest service 1251 UK 870 6072439 Intel® Server Chassis SC5400 User's Guide 67
  • Intel SC5400BRP | User Manual - Page 144
    8 621 33104691 (not toll-free) Hong Kong 852 2 844 4456 India........... 0006517 2 68303634 (manual toll-free. You need an IDD-equipped telephone) Indonesia ... 803 65 7249 Korea ......... 822 767 2595 at 800 225 288. Once connected, dial 800 843 4481 68 Intel® Server Chassis SC5400 User's Guide
  • Intel SC5400BRP | User Manual - Page 145
    0114 Peru 001 916 377 0114 Uruguay..... 001 916 377 0114 Venezuela... Contact AT&T USA at 0 800 2255 288. Once connected, dial 800 843 4481 Intel® Server Chassis SC5400 User's Guide 69
  • Intel SC5400BRP | User Manual - Page 146
    70 Intel® Server Chassis SC5400 User's Guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
Intel® Server Chassis SC5400 User’s
Guide
A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/
Products
Intel Order Number D38435-005