Intel SR1300 Product Specification

Intel SR1300 Manual

Get Intel SR1300 PDF manuals and user guides View all Intel SR1300 manuals
Add to My Manuals
Save this manual to your list of manuals

Intel SR1300 manual content summary:

  • Intel SR1300 | Product Specification - Page 1
    1U Server Chassis SR1300 Technical Product Specification Intel order number A94544-004 Revision 1.2 June, 2003 Enterprise Platforms and Services Marketing
  • Intel SR1300 | Product Specification - Page 2
    History Revision History 1U Server Chassis SR1300 Date January, 2002 April, 2002 August, 2002 January, 2003 June, 2003 Revision Number 0.2 0.5 1.0 1.1 1.2 Modifications Initial creation Minor updates and preliminary release Minor updates and release Added server board SE7501WV2. Corrections
  • Intel SR1300 | Product Specification - Page 3
    1U Server Chassis SR1300 Disclaimers Disclaimers Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and
  • Intel SR1300 | Product Specification - Page 4
    Controls and Indicators 4 1.5.2 Peripheral Bays...5 1.6 Power Supply...5 1.7 System Cooling...5 1.8 Chassis Security ...6 1.9 Rack and Cabinet Mounting Options 6 1.10 Front Bezel Features ...6 2. Power Sub-system ...7 2.1 Power Distribution Board (PDB 7 2.1.1 Power Supply Edge Connector Slot
  • Intel SR1300 | Product Specification - Page 5
    1U Server Chassis SR1300 Table of Contents 5.1 Front Panel Buttons and Intrusion Switch 20 5.2 Front Panel Assembly Connectors 21 5.3 Front Panel System Status LED Indicators 24 5.3.1 Power / Sleep LED 25 5.3.2 System Status LED 25 5.3.3 Drive Activity LED ...26 5.3.4 System Identification
  • Intel SR1300 | Product Specification - Page 6
    Table of Contents 1U Server Chassis SR1300 7.2.6 ATA100 Connectors 44 7.2.7 Power Connector ...45 7.2.8 ATA100 Interface to Drive 45 8. Floppy/CDROM and Floppy/DVDROM Module Interface Assemblies 46 9. PCI Riser Cards ...49 10. Supported Intel® Server Boards 53 11. Serial Port Usage...54 12.
  • Intel SR1300 | Product Specification - Page 7
    1U Server Chassis SR1300 List of Figures List of Figures Figure 1. Front and Rear Chassis Views 1 Figure 2. System Components ...2 Figure 3. Chassis Back ...3 Figure 4. Chassis Front...3 Figure 5. Controls and Indicators 4 Figure 6. Optional Peripherals ...5 Figure 7. Optional Front Bezel ...6
  • Intel SR1300 | Product Specification - Page 8
    List of Tables 1U Server Chassis SR1300 List of Tables Table 1. Chassis Dimensions ...2 Table 2. Power Supply Edge Connector Slot Pinout 8 Table 3. 24-pin Baseboard Power Connector Pinout 9 Table 4. 8-pin Baseboard Power Connector Pinout 10 Table 5. Peripheral Power Connector Pinout 10 Table
  • Intel SR1300 | Product Specification - Page 9
    1U Server Chassis SR1300 List of Tables Table 33. System Office Environment Summary 60 Table 34. SR1300/SE7500WV2 Component MTBF Numbers 63 Table 35. SR1300/SE7501WV2 Component MTBF Numbers 63 Revision 1.2 ix Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 10
    List of Tables 1U Server Chassis SR1300 < This page intentionally left blank. > x Revision 1.2 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 11
    1U Server Chassis SR1300 SR1300 Feature Summary 1. SR1300 Feature Summary The server chassis SR1300 is a 1U server chassis designed to support the Intel® server boards SE7500WV2 and SR7501WV2. Both board and chassis have a feature set that is designed to support the high-density server market.
  • Intel SR1300 | Product Specification - Page 12
    Feature Summary 1U Server Chassis SR1300 1.2 Chassis Dimensions Table 1. Chassis Dimensions Height Width Depth 43 mm 430 mm 609.2 mm 1.693 Inches 16.93 Inches 23.89 Inches 1.3 System Components A Power supply B PCI card bracket (full-length) C Riser card assembly D PCI card bracket
  • Intel SR1300 | Product Specification - Page 13
    1U Server Chassis SR1300 SR1300 Feature Summary 1.4 Chassis Back I/O Ports and Features On the back of the chassis are cutouts for all external I/O connectors found on the server boards SE7500WV2 and SE7501WV2. The I/O connector locations are pre-cut, so the use of an I/O shield is not required.
  • Intel SR1300 | Product Specification - Page 14
    1U Server Chassis SR1300 1.5.1 Front Panel Controls and Indicators The front panel controls and indicators are shown below with an optional CDROM (or DVD) drive/floppy disk drive installed. M NO P Q AB C D EF GH I J K L A NIC 1 activity LED B NIC 2 activity LED C Power P Manual CD
  • Intel SR1300 | Product Specification - Page 15
    1U Server Chassis SR1300 1.5.2 Peripheral Bays SR1300 Feature Summary A Hard drive bays B Flex bay C Slimline CD-ROM drive/floppy or DVD/floppy drive module D Hard disk drive (Only in SCSI Backplane configuration) E Hard disk drive Figure 6. Optional Peripherals 1.6 Power Supply The
  • Intel SR1300 | Product Specification - Page 16
    can be programmed to respond to an intrusion by powering down or by locking the keyboard. 1.9 Rack and Cabinet Mounting Options The server chassis SR1300 was designed to support 19" wide and up to 30" deep server cabinets. The chassis comes equipped with a relay rack or cabinet mount kit that can be
  • Intel SR1300 | Product Specification - Page 17
    Power Sub-system 2. Power Sub-system 2.1 Power Distribution Board (PDB) The server chassis SR1300 provides a power distribution board, eliminating the use of cables for power distribution to various system components. The power distribution board provides connectors to allow both the power supply
  • Intel SR1300 | Product Specification - Page 18
    Power Sub-system 1U Server Chassis SR1300 2.1.1 Power Supply Edge Connector Slot An AMP* 1364999-1, or equivalent type of slot connector, is used to plug a blind mating edge connector from the power supply. The following table provides the pin-out for the slot connector. Table 2. Power Supply
  • Intel SR1300 | Product Specification - Page 19
    1U Server Chassis SR1300 Pin Signal 25 Gnd 26 5V 27 5V 28 5V 29 3.3V 30 3.3V 31 3.3V Ground Description Power Sub-system Signal direction with respect to connector on PDB Input to PDB 19 COMMON 20 RESERVED_(-5V) 21 +5V 22 +5V 23 +5V 24 COMMON Revision 1.2 9 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 20
    Power Sub-system 1U Server Chassis SR1300 2.1.3 Baseboard Connector (2) An 8-pin Molex 39-01-2080 connector connected to a cable from the power distribution board connects to the server boards SE7500WV2 and SE7501WV2 to provide power to the processor subsystem. The following table provides the
  • Intel SR1300 | Product Specification - Page 21
    3.3VS Serial Clock Description Serial Data. Information from the power supply Reserved Return remote sense 3.3V sense 2.2 Power Supply The server chassis SR1300 supports one 350W SSI EPS power supply. The 350W power supply supports Power Factor Correction (PFC) and accepts AC input directly
  • Intel SR1300 | Product Specification - Page 22
    -system 1U Server Chassis SR1300 Table 7. Power Supply Input/ power and peak current loading shall be supported for a minimum of 12 seconds 2.2.1 Power Supply Mechanical Specifications The approximate power supply Power System Enclosure 70-pin 12 Revision 1.2 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 23
    1U Server Chassis SR1300 Power Sub-system The power supply has no power cable harness to distribute power to the system. Instead, the power supply is plugged directly into a power distribution board by means of Ground Ground 5V 5V 5V 3.3V 3.3V 3.3V Revision 1.2 13 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 24
    Power Sub-system 1U Server Chassis SR1300 2.2.2 Over Temperature Protection The power supply will be protected against over temperature conditions caused by loss of fan cooling or excessive ambient temperature. In an OTP condition the PSU will shutdown. When the power supply temperature drops to
  • Intel SR1300 | Product Specification - Page 25
    1U Server Chassis SR1300 Chassis Cooling 3. Chassis Cooling A five-fan module and the two power supply fans provide the necessary airflow to cool the system. A fan on the processor heat sink is not necessary in this chassis. Note: Certain processor kits may come with a Processor Wind Tunnel (PWT)
  • Intel SR1300 | Product Specification - Page 26
    Chassis Cooling 1U Server Chassis SR1300 Table 11. Fan Module Power Cable Pinout Pin Signal Name Type 1 Common Power 2 Common Power 3 Common Power 4 PWM_Power Power 5 PWM_Power Power 6 PWM_Power Power 7 PWM_Power Power 8 Tach1 In 9 Tach2 In 10 Tach3 In 11 Tach4 In 12
  • Intel SR1300 | Product Specification - Page 27
    1U Server Chassis SR1300 Chassis Peripheral Bays 4. Chassis Peripheral Bays The server chassis SR1300 provides two drive bays and one flex bay at the front of the chassis. In SCSI configurations, all three drive bays may be populated with a tray-mounted 3.5" Single Connector Attachment (SCA) SCSI
  • Intel SR1300 | Product Specification - Page 28
    be hot swapped. The system must be powered down before the module can be inserted or removed. Figure 14. Optional DVD/CD-ROM Drive / FDD Module 4.2 Hard Disk Drive Bays Depending on which backplane is used, SCSI or ATA, the server chassis SR1300 can support two or three hard disk drives. For
  • Intel SR1300 | Product Specification - Page 29
    1U Server Chassis SR1300 Chassis Peripheral Bays 4.3 Drive Trays Each hard drive used in the system must be mounted to a drive tray, making insertion and extraction of the drive from the chassis very simple. Each drive tray has its own dual purpose latching mechanism which is used to both insert/
  • Intel SR1300 | Product Specification - Page 30
    , a memory download can be performed to determine the cause of the problem Toggles the front panel ID LED and the baseboard ID LED on/off. The baseboard ID LED is visible through the rear of the chassis and allows you to locate the server you're working on from behind a rack of servers A chassis
  • Intel SR1300 | Product Specification - Page 31
    1U Server Chassis SR1300 Front Panel Assembly Figure 17. Front Panel Assembly Interface Board, Front View 5.2 Front Panel Assembly Connectors The front panel video port and direct the video signal to the monitor connected to the front panel. Revision 1.2 21 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 32
    Front Panel Assembly 1U Server Chassis SR1300 Table 14. Video Connector Pin # I/O backplane provides a signal path to a 100-pin connector, which is then cabled to the server boards SE7500WV2 and SE7501WV2. Table 15. Internal USB Header Pin # I/O Description 1 PWR USB Power 3 2 PWR USB Power
  • Intel SR1300 | Product Specification - Page 33
    1U Server Chassis SR1300 Front Panel Assembly Table 16. Front Panel to HDD Backplane Connector Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 SB5V VCC FP_SYS_FLT_LED2_L POWER_LED_ON_L FP_SYS_FLT_LED1_L LED Anode for another Model Revision 1.2 23 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 34
    Front Panel Assembly 1U Server Chassis SR1300 5.3 Front Panel System Status LED Indicators The front panel houses six LEDs, which are viewable with or without the front bezel to display the system's operating state. The LEDs provide a status for the following system states: • Power/Sleep • NIC1 /
  • Intel SR1300 | Product Specification - Page 35
    1U Server Chassis SR1300 Front Panel Assembly 5.3.1 Power / Sleep LED The BIOS controls the front panel Power LED as described in the following table. Table 18. SSI Power LED Operation State Power Off Power On S5 S4 S3-S1 Power Mode Non-ACPI Non-ACPI ACPI ACPI ACPI LED OFF ON OFF OFF Slow
  • Intel SR1300 | Product Specification - Page 36
    1U Server Chassis SR1300 Non-Critical Condition • Temperature, voltage, or fan non-critical threshold crossing • Chassis out some of the system memory 5.3.3 Drive Activity LED The configured system). The server boards SE7500WV2 and servicing when it is installed within a high-density rack
  • Intel SR1300 | Product Specification - Page 37
    1U Server Chassis SR1300 Hot-Swap SCSI Backplane 6. Hot-Swap SCSI Backplane The server chassis SR1300 can support a multifunctional SCSI backplane, supporting the following features: • Three SCA2 compatible hot-swap SCSI connectors • Floppy/CDROM module interface connector • Support for the
  • Intel SR1300 | Product Specification - Page 38
    Hot-Swap SCSI Backplane 1U Server Chassis SR1300 6.2 SCSI Backplane Configuration Jumpers The following table describes the settings and functionality of the jumper block used on the SR1300 hot-swap SCSI backplane. Table 19. Hot-Swap Backplane Configuration Jumpers Option Firmware Update Flash
  • Intel SR1300 | Product Specification - Page 39
    1U Server Chassis SR1300 Hot-Swap SCSI Backplane From SE7500WV2 or SE7501WV2 Base Board Wide SCSI Connector CD-ROM & DVD /FDD FRONT PANEL INTERFACE To FDD/CD Daughter Board connector To Front Panel Board Drive 0 Drive 1 Drive 2 Drive Power Control LVD/SE MultiMode Terminators SE Terminator
  • Intel SR1300 | Product Specification - Page 40
    Backplane 1U Server Chassis SR1300 6.3.2 Phillips* P80C652EBB Micro-Controller The SCSI backplane supports the SAF-TE 1.0 specification and utilizes the Philips* P80C652EBB micro-controller for all SAF-TE functions. If necessary, the backplane power control modes - idle mode and power supply
  • Intel SR1300 | Product Specification - Page 41
    1U Server Chassis SR1300 Hot-Swap SCSI Backplane The maximum high-level input current at 0.9VDD, of both the SDA pin and SCL pin of an I2C device, is 10uA, including the leakage
  • Intel SR1300 | Product Specification - Page 42
    Hot-Swap SCSI Backplane 1U Server Chassis SR1300 6.3.6 SCSI Termination Passive SE termination is used for the single-ended extension of the SCSI bus on which the 53C80S resides. LVD/SE multi-mode terminators provide SPI-4 compliant active termination for the backplane end of the SCSI bus. It
  • Intel SR1300 | Product Specification - Page 43
    1U Server Chassis SR1300 Hot-Swap SCSI Backplane 6.3.10 Local I2C* EEPROM and Temperature Sensor An I2C bus temperature sensor is connected to the micro-controller on a private I2C bus. Microcontroller programming implements
  • Intel SR1300 | Product Specification - Page 44
    Hot-Swap SCSI Backplane 1U Server Chassis SR1300 Table 21. UltraWide (SE) and Ultra2 (LVD) SCSI Connector Pinout Pin Name 1 +DB (12) 2 +DB (13) 3 +DB (14) 4 +DB (15) STANDBY RST_SW_ACTIVE_L HDD_LED_FAULT_L PWR_SW_ACTIVE_L HDD_LED_ON_L VCC 34 Revision 1.2 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 45
    1U Server Chassis SR1300 Hot-Swap SCSI Backplane Pin A14 A15 A16 A17 A18 A19 A20 A21 A22 CDR_DREQ GND CDR_DACK_L GND CDR_ADDR1 CDR_ADDR0 CDR_CS1_L 6.3.14 FDD/CDROM Daughter Board Connector The SCSI backplane provides a pathway for floppy and IDE33 signals from the 100-pin floppy/FP/IDE connector
  • Intel SR1300 | Product Specification - Page 46
    Hot-Swap SCSI Backplane 1U Server Chassis SR1300 6.3.15 Front Panel Interface Connector The SCSI backplane provides a pathway for front panel signals from the 100-pin floppy/FP/IDE connector to GND V_IO_RED_CONN_FP GND TP_FP34_P33 ZZ_V_SWITCH_L 36 Revision 1.2 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 47
    1U Server Chassis SR1300 Hot-Swap SCSI Backplane 6.3.16 SCA2 Hot-Swap SCSI Drive Connectors The SCSI backplane provides three hot-swap SCA2 connectors (Foxconn*: LS24403-J34) , which provide power and SCSI signals using a single connector. Each SCA drive attaches to the backplane using one of
  • Intel SR1300 | Product Specification - Page 48
    Hot-Swap SCSI Backplane 1U Server Chassis SR1300 Pin Signal Name Signal Name Pin 29 -DB (P1) +DB (P1) 69 30 -DB (15) +DB (15) 70 31 -DB (14) + 77 38 RMT_START DLYD_START 78 39 SCSI ID (0) SCSI ID (1) 79 40 SCSI ID (2) SCSI ID (3) 80 38 Revision 1.2 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 49
    1U Server Chassis SR1300 ATA Backplane 7. ATA Backplane The server chassis SR1300 can support a multifunctional ATA backplane, supporting the following features: • Two cold swappable ATA hard drive connectors • One floppy/CDROM or floppy/DVDROM module interface connector • Hard drive power-up
  • Intel SR1300 | Product Specification - Page 50
    ATA Backplane 1U Server Chassis SR1300 Figure 22. ATA Backplane Layout 7.2 ATA Backplane Functional Architecture The ATA backplane is made up of the following functional blocks: • ATA100 bus with IDE connectors, which are combined with 4-pin power connectors • ATA drive power control • Peripheral/
  • Intel SR1300 | Product Specification - Page 51
    , (i.e., system must be powered off before the ATA drives or the floppy/CDROM module can be inserted or extracted from the system) will be supported in the server chassis SR1300. 7.2.3 Server Boards SE7500WV2 and SE7501WV2 to CD/FDD/FP Interface The ATA backplane provides a pathway for signals
  • Intel SR1300 | Product Specification - Page 52
    ATA Backplane 1U Server Chassis SR1300 Table 25. Floppy/FP/IDE Connector Pinout Pin A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 FDD_DS0_L GND FDD_INDEX_L GND FDD_DENSEL0 GND CDR_D7 CDR_D6 GND CDR_D5 CDR_D4 GND CDR_D3 CDR_D2 GND CDR_D1 CDR_D0 GND 42 Revision 1.2 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 53
    1U Server Chassis SR1300 Pin A43 A44 A45 A46 A47 A48 A49 A50 GND Name CDR_IOW_L CDR_IOR_L CDR_IRDY CDR_IRQ CDR_ADDR2 GND CDR_CS3_L Pin B43 B44 B45 B46 B47 B48 B49 B50 Name CDR_DREQ GND CDR_DACK_L GND CDR_ADDR1 CDR_ADDR0 CDR_CS1_L ATA Backplane Revision 1.2 43 Intel order number A94544
  • Intel SR1300 | Product Specification - Page 54
    V_IO_GREEN_CONN_FP GND V_IO_RED_CONN_FP GND TP_FP34_P33 ZZ_V_SWITCH_L 1U Server Chassis SR1300 7.2.6 ATA100 Connectors The ATA backplane has two 40-pin ATA100 connectors PDIAG_L 35 IDESA0 36 IDESA2 37 IDECS1_L 38 IDECS3_L 39 IDEHDACT_L 40 GND 44 Revision 1.2 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 55
    1U Server Chassis SR1300 ATA Backplane 7.2.7 Power Connector The ATA backplane provides power for up to two ATA drives and one floppy/CD-ROM module. A 6-line power cable is routed from the power distribution board and plugs into a connector on the backplane. Table 28. 6-Pin ATA Backplane Power
  • Intel SR1300 | Product Specification - Page 56
    1U Server Chassis SR1300 8. Floppy/CDROM and Floppy/DVDROM Module Interface Assemblies Two modules are available for use in the server chassis SR1300. Both support used in the flex bay. Both the SCSI and ATA backplanes provide a pathway for FDD/CD signals from the 100- Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 57
    Server Chassis SR1300 Floppy/CDROM and Floppy/DVDROM Module Interface Assemblies Pin Name 49 FDD_DENSEL0 51 FDD_TRK0_L 53 VCC** 55 VCC** 57 VCC** 59 VCC** Pin Name 50 FDD_DS0_L 52 FDD_RDATA_L 54 VCC** 56 VCC** 58 VCC** 60 VCC** Notes: * This signal is used only on the ATA backplane
  • Intel SR1300 | Product Specification - Page 58
    Floppy/CDROM and Floppy/DVDROM Module Interface Assemblies 1U Server Chassis SR1300 Pin 12 Signal Name Signal Name Pin CDR_D (15) CDR_D (0) 52 13 CDR_D (14) CDR_D (1) 53 14 CDR_D ( NC 78 39 NC NC 79 40 NC CD/FDD Enable (GND) 80 48 Revision 1.2 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 59
    1U Server Chassis SR1300 PCI Riser Cards 9. PCI Riser Cards The SR1300 1U server chassis supports the use of two single-slot PCI riser cards. Each riser card is capable of supporting a 3.3 V, 64-bit add-in card. For the SCSI SKU, the board supports Revision 1.2 49 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 60
    1U Server Chassis SR1300 The PCI riser card in the riser slot located closest to the edge of the baseboard will only support low profile add-in cards. The second riser card is capable of supporting +3.3V (I/O) 60 ACK64# 61 +5V 62 +5V 50 Intel order number A94544-004 Side A AD [09] Ground Ground
  • Intel SR1300 | Product Specification - Page 61
    1U Server Chassis SR1300 Pin Side B 15 Ground 16 CLK 17 Ground 18 REQ# 19 +3.3V (I/O) 20 AD [31] 21 AD [29] 22 Ground 23 AD [27 Ground AD [44] AD [42] +3.3V (I/O) AD [40] AD [38] Ground AD [36] AD [34] Ground AD [32] Reserved Ground Reserved Revision 1.2 51 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 62
    PCI Riser Cards 1U Server Chassis SR1300 Figure 27. 1U PCI Riser Card Mechanical Drawing 52 Revision 1.2 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 63
    following feature set: • Dual Intel® Xeon™ processors socket 604 • Intel® E7500 chipset or E7501 chipset • Support for six DDR 200/266 Registered ECC memory with two-way interleaving up to 12 GBs Notes: Only low profile DIMMs are supported in the SR1300 server chassis. 2 GB DIMM thermal performance
  • Intel SR1300 | Product Specification - Page 64
    Port Usage 1U Server Chassis SR1300 • Two external Universal Serial Bus (USB) ports on the rear of the board with an additional internal header that provides one optional USB port for front panel support • One external low-profile RJ45 Serial B port on the back of the board. • Support for up
  • Intel SR1300 | Product Specification - Page 65
    1U Server Chassis SR1300 Regulatory and Integration Information 12. Regulatory and Integration Information 12.1 Product Regulatory Compliance 12.1.1 Product Safety Compliance The server (Immunity) (European Union) • EN61000-3-2 & -3 (Power Harmonics & Fluctuation and Flicker) • CE - EMC
  • Intel SR1300 | Product Specification - Page 66
    and Integration Information 1U Server Chassis SR1300 12.1.3 Product the EMC performance of this product, contact: Intel Corporation 5200 N.E. Elam Young Parkway Hillsboro, OR not installed and used in accordance with the instructions, may cause harmful interference to radio communications
  • Intel SR1300 | Product Specification - Page 67
    1U Server Chassis SR1300 Regulatory and Integration Information Only peripherals (computer input/output cause undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation 5200 N.E. Elam Young Parkway Hillsboro, OR 97124-6497 Phone: 1 (800)-INTEL4U
  • Intel SR1300 | Product Specification - Page 68
    Notices (International) 1U Server Chassis SR1300 English translation of and use the equipment according to the instruction manual. 12.2.6 BSMI (Taiwan) The BSMI or side (rack mount configuration). 12.3 Replacing the Back up Battery The lithium battery on the server board powers the real
  • Intel SR1300 | Product Specification - Page 69
    1U Server Chassis SR1300 Regulatory and Integration Information ADVARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. Revision 1.2 59 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 70
    1U Server Chassis SR1300 ) in an idle state at typical office ambient temperature. (23 +/- degrees C) Sound Power: 7.0 BA in an idle state at typical office ambient temperature. (23 +/- 2 damage may be present (Chassis Weight 40-80 lbs) +/-15kV per Intel Environmental test specification 1826 BTU
  • Intel SR1300 | Product Specification - Page 71
    1U Server Chassis SR1300 Environmental Limits 13.3 System Environmental Testing The system will be tested per the Environmental Standards Handbook, Intel Doc.# and Source Interrupt • AC Surge • Acoustics (Sound Power and Sound Pressure) • ESD Revision 1.2 61 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 72
    and Availability 1U Server Chassis SR1300 14. Serviceability and Availability The system is designed to be serviced by qualified technical personnel only. The desired Mean Time To Repair (MTTR) of the system is 30 minutes, including diagnosis of the system problem. To meet this goal
  • Intel SR1300 | Product Specification - Page 73
    shows the MTBF numbers for individual components within the chassis. Table 34. SR1300/SE7500WV2 Component MTBF Numbers Subassembly (Server in 35C ambient air) Westville Motherboard HDDI Board PCI riser card PCI riser card Front Panel board 1U Power jumper board MTBF FIT (hours) (flrs/10^9 hrs
  • Intel SR1300 | Product Specification - Page 74
    Calculated MTBF 1U Server Chassis SR1300 This page intentionally left blank 64 Revision 1.2 Intel order number A94544-004
  • Intel SR1300 | Product Specification - Page 75
    DIMMs can be used in the SR1300 server chassis. Only low-profile PCI add-in cards can be used in the PCI riser located closest to the edge of the chassis. Processor fans are not supported and are not needed in the server chassis SR1300. The fan pack and power supply fan provide the necessary cooling
  • Intel SR1300 | Product Specification - Page 76
    Controller Power Supply Unit Processor Wind Tunnel Ring Indicate Single Connector Attachment Sensor Data Record Single-Ended Universal Asynchronous Receiver Transmitter Universal Serial Bus Voluntary Control Council for Interference 1U Server Chassis SR1300 II Revision 1.2 Intel order
  • Intel SR1300 | Product Specification - Page 77
    1U Server Chassis SR1300 Index Index A Adaptec AIC-3860, 31 air baffle, 15 ATA backplane features, 39 functional blocks, 40 layout, 39 ATA drive, 17, 18 Maxtor, 18, 39 replacing, 18 Western Digital, 18, 39 ATA drive interface connector, 45 ATA power connector, 45 ATA100 connector, 44 B baseboard
  • Intel SR1300 | Product Specification - Page 78
    Index 1U Server Chassis SR1300 reset, 29 I I/O connectors, 3, 21 I2C communication, 30 supply voltage, 30 ID button, 20 ID LED, 24, 26 IDE33 signal pathway, 43 IMB, 32 L LED, 24 LVD-toSE tranceiver, 31 M mean time between failures, 63 memory, 53 Molex 52760-0608, 46 Molex 71661-2380, 47 mounting
  • Intel SR1300 | Product Specification - Page 79
    1U Server Chassis SR1300 SCA2 connector, 37 SCSI backplane features, 27 functional blocks, 28 jumpers, 28 layout, 27 power control, 32 reset, 29 SCSI bus, 27 SCSI cable, 33 SCSI connector, 27 SCSI controller, 31 SCSI drive, 17, 18 SCSI interface, 31 SCSI termination,
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
1U Server Chassis SR1300
Technical Product Specification
Intel order number A94544-004
Revision 1.2
June, 2003
Enterprise Platforms and Services Marketing