Intel SR870BH2 Quick Start Guide

Intel SR870BH2 - Server Platform - 0 MB RAM Manual

Intel SR870BH2 manual content summary:

  • Intel SR870BH2 | Quick Start Guide - Page 1
    Intel® Server System SR870BH2 Quick Start Guide Order Number: C43207-001 This guide contains basic instructions for setting up the system and accessing the Product Guide from the Resource CD.
  • Intel SR870BH2 | Quick Start Guide - Page 2
    Intel Server Boards and Server Chassis Safety Information en el CD Resource y/o en http:\\support.intel.com. Resource CD http:\\support.intel.com 上的 Intel Server Boards and Server Chassis Safety Information(《Intel Copyright © 2000 - 2003 Intel Corporation with the instruction manual, may cause
  • Intel SR870BH2 | Quick Start Guide - Page 3
    Site ...8 Checking Power Cords ...9 Connections and Controls...10 Connecting the Monitor, Keyboard, and Mouse 14 Powering On the Server for the First Time 14 Mounting the DVD/CD-RW Device 15 The Intel® Server System SR870BH2 Resource CD 15 The Intel® Server System SR870BH2 Product Guide 16 iii
  • Intel SR870BH2 | Quick Start Guide - Page 4
    iv Intel® Server System SR870BH2 Quick Start Guide
  • Intel SR870BH2 | Quick Start Guide - Page 5
    listed above is an estimate for a fully configured system and will vary depending on number of peripheral devices and add-in cards, as well as the number of processors and DIMMs installed in the system. Figure 1. Intel® Server System SR870BH2 Intel® Server System SR870BH2 5 Quick Start Guide
  • Intel SR870BH2 | Quick Start Guide - Page 6
    the instructions, may Intel Corporation 2800 Center Drive DuPont, WA 98327 USA Laser Compliance Notice Intel products that use laser technology comply with Class 1 laser requirements. Class 1 Laser Product Luokan 1 Laserlaite Klasse 1 Laser Apparat 6 Intel® Server System SR870BH2 Quick Start Guide
  • Intel SR870BH2 | Quick Start Guide - Page 7
    If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions. ICES-003 (Canada) Apparatus," ICES-003 of the Canadian Department of Communications. Intel® Server System SR870BH2 7 Quick Start Guide
  • Intel SR870BH2 | Quick Start Guide - Page 8
    disk drives, add-in boards, and other parts. This server can withstand normal levels of environmental ESD. However, we recommend doing all procedures in this guide only at an ESD-protected workstation. If one is not available, you can provide some ESD 8 Intel® Server System SR870BH2 Quick Start
  • Intel SR870BH2 | Quick Start Guide - Page 9
    server when handling components (e.g., any unpainted metal surface). CAUTION Grounded outlet: Make sure that the power service of problems in your server. Ventilation: The equipment rack must provide sufficient airflow to the front of the server to Intel® Server System SR870BH2 9 Quick Start Guide
  • Intel SR870BH2 | Quick Start Guide - Page 10
    3. Input Power Connector, server end: The connectors that plug into the AC receptacles on the server must be an IEC 320, sheet C13, type interference regulations, see "Electromagnetic Compatibility" in the Intel® Server System SR870BH2 Product Guide. Connections and Controls Figure 2 and Figure 3
  • Intel SR870BH2 | Quick Start Guide - Page 11
    Drives DVD/CD Drive Front Panel Power Bay Power Supply Modules Figure 3. Front View of Intel® Server System SR870BH2 (Shown with Bezel Removed) Figure 4 shows the front control panel of the Server System SR870BH2. The front control panel of the server displays status lights for system status
  • Intel SR870BH2 | Quick Start Guide - Page 12
    Asserts SDINT. Description System identification switch and light Indicates system status. LED State Description Off Not ready Post err/NMI Ev/CPU missing Green, Ready connector USB port 3, 4-pin connector USB port 4, 4-pin connector 12 Intel® Server System SR870BH2 Quick Start Guide
  • Intel SR870BH2 | Quick Start Guide - Page 13
    slot, full length Two AC input power connectors External SCSI connector1 System ID switch System ID LED (blue) Two LAN ports, supports both LVDS and SE signals via the external SCSI connector. 2. EMP access is provided via shared serial port. Intel® Server System SR870BH2 13 Quick Start Guide
  • Intel SR870BH2 | Quick Start Guide - Page 14
    Manager, you can mount the DVD/CD-RW device to block zero and then load the operating system. For information on the Boot Manager and the EFI Shell, refer to the Intel® Server System SR870BNH2 Product Guide. Follow these steps to power up the Server System SR870BH2 for the first time: 1. Make sure
  • Intel SR870BH2 | Quick Start Guide - Page 15
    -less systems, RedHat* Advanced Server* 2.1 and SuSE* Enterprise Server 8.0 SCSI and Ethernet* drivers, System Maintenance Utility (SMU), EFI* Platform Diagnostics, FRUSDR Loader*, Quick Start Guide (this guide), Product Guide and Adobe* Acrobat* Reader. Intel® Server System SR870BH2 15 Quick
  • Intel SR870BH2 | Quick Start Guide - Page 16
    the utility you want to run. The Intel® Server System SR870BH2 Product Guide The Intel® Server System SR870BH2 Product Guide comes as a single .PDF file shipped on the Resource CD. You can use the Adobe* Acrobat* Reader to view the product guide. 16 Intel® Server System SR870BH2 Quick Start
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

Intel
®
Server System SR870BH2 Quick
Start Guide
Order Number:
C43207-001
This guide contains basic instructions for setting up the system and accessing
the Product Guide from the Resource CD.