Intel SRKA4 Product Guide

Intel SRKA4 - Server Platform - 0 MB RAM Manual

Get Intel SRKA4 - Server Platform - 0 MB RAM PDF manuals and user guides
UPC - 735858135627
View all Intel SRKA4 manuals
Add to My Manuals
Save this manual to your list of manuals

Intel SRKA4 manual content summary:

  • Intel SRKA4 | Product Guide - Page 1
    SRKA4/ISP4400 Server System Product Guide Order Number: A07928-003
  • Intel SRKA4 | Product Guide - Page 2
    Disclaimer Intel Corporation (Intel) makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Intel assumes no responsibility for any errors that may appear in this document. Intel makes
  • Intel SRKA4 | Product Guide - Page 3
    plug PCI Add-in Boards 29 Removing a Hot-plug PCI Add-in Board 30 Installing a Hot-plug PCI Add-in Board 31 Part II: Service Technician's Guide 33 5 A Detailed Description of Chassis Features Chassis Features ...35 Peripherals ...39 Hard Drives...39 Power Subsystem...41 System Cooling...43 E-Bay
  • Intel SRKA4 | Product Guide - Page 4
    ...52 Removing the Memory Retention Bar 52 Installing the Memory Retention Bar 52 SKA4 Baseboard...53 Removing the Baseboard 53 Installing the Baseboard 55 Accessing Baseboard Components Activity Light Does Not Light 75 Network Problems ...76 iv SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 5
    PCI Installation Tips 76 Problems with Application Software 76 Bootable CD-ROM Is Not Detected 106 ADVERTENCIAS: Español 108 Index...111 Figures 1. SRKA4 MP Server System 11 2. One of Two Thumbscrews Securing Top Cover 12 3. SRKA4 MP Server System Without Cover and Bezel 13 3a. Overhead View
  • Intel SRKA4 | Product Guide - Page 6
    Securing Front Cover to Chassis 35 15. One of Two Thumbscrews Securing Top Cover 36 16. SRKA4 MP Server System Without Covers and Bezel 36 16a. Overhead View of System and E-Bay 36 17. Hard HDD Connector 84 16. External Adaptec Ultra 160/m SCSI 86 vi SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 7
    17. CD-ROM Adapter Board 40 Position IDE Connector 87 18. CD-ROM Adapter Board Power Connector 87 19. Audio Connector...88 20. CD-ROM JAE Connector Pin-out 88 21. 34-Position Floppy Connector Pin-out 89 22. Floppy Adapter Board Power Connector 89 23. FFC Cable Pin-out ...90 24. Environmental
  • Intel SRKA4 | Product Guide - Page 8
    viii SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 9
    Part I: User's Guide 1 Chassis Description 2 Baseboard Description 3 Configuration Software and Utilities 4 Removing and Installing User Serviceable Components 9
  • Intel SRKA4 | Product Guide - Page 10
    10 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 11
    a rack. Contact your customer service representative for details on purchasing a rack adapter kit. For instructions on mounting the server in a rack, see the SRKA4/ISP4400 Server System Quick Start Guide accompanying your kit. Table 1. SRKA4 Server Physical Specifications Specification Rack Mode
  • Intel SRKA4 | Product Guide - Page 12
    a top cover. The front cover is secured by screws and can only be removed by a qualified service technician. The top cover is secured by thumbscrews and provides user access to hot-pluggable PCI components. One to hard drives and the peripheral bay. 12 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 13
    C A1 A2 B E2 Figure 3. SRKA4 MP Server System Without Cover and Bezel OM09936 Figure part of the system. If the operating system supports hot-swapping of hard drives, these drives can be changed without shutting down the server. C. Power Subsystem Installed: A power subsystem bay that supports
  • Intel SRKA4 | Product Guide - Page 14
    by a qualified service technician. The E-Bay contains the Intel® SKA4 baseboard. The baseboard has the following major components: • Up to four Intel® Pentium® III Xeon™ processors • Server Set III HE chipset • Up to sixteen PC/100-compliant Registered ECC SDRAM memory modules that support up to
  • Intel SRKA4 | Product Guide - Page 15
    line CD-ROM drive • A 3.5-inch floppy drive Only qualified service technicians should remove and install components in the configurable media bay. Hard Drives The chassis contains up to one hard drive bay. The hard drive bay supports either one of the following configurations: • Five 3.5-inch by
  • Intel SRKA4 | Product Guide - Page 16
    the SRKA4 MP Server System exceeds the 240 VA energy hazard limit that defines an operator-accessible area. Only qualified service technicians should access the processor, memory, power subsystem, and non hot-plug/hot-swap areas of the SKA4 baseboard. 16 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 17
    in this guide and the chassis may not function normally. Three fans support any system configuration but without fan redundancy. Operating the server with a non-redundant cooling system is not recommended for systems requiring high availability. To maintain SRKA4 MP Server System availability, Intel
  • Intel SRKA4 | Product Guide - Page 18
    contact, this button puts an operating system supporting ACPI mode to sleep (S1). When becomes active. This system does not have a service mode. D. Front panel LEDs from left to server. Flashing green indicates that the system is in ACPI sleep mode. 18 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 19
    Rear Panel I/O Ports and Features AB ON M LK I GF E JH D C OM10263 Figure 7. Rear Panel I/O Ports and Features A. AC input power connector B. Two optional external SCSI connector ports The figure shows only one connector port, but your system has two C. Hot-plug 64-bit, 33 MHz PCI add-in
  • Intel SRKA4 | Product Guide - Page 20
    20 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 21
    2 Baseboard Description The SRKA4 MP Server System contains the SKA4 baseboard. For more information about the SKA4 baseboard, see the SKA4 Baseboard Product Guide contained in your server software kit. 21
  • Intel SRKA4 | Product Guide - Page 22
    22 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 23
    3 Configuration Software and Utilities Configuration software and utilities are part of the SKA4 baseboard. For more information about configuration software and utilities, see the SKA4 Baseboard Product Guide contained in your server software kit. 23
  • Intel SRKA4 | Product Guide - Page 24
    24 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 25
    no user-serviceable parts inside it; servicing should be done by technically qualified personnel. The total power requirement for the SRKA4 MP Server System exceeds the 240 VA energy hazard limit that defines an operator-accessible area. Only qualified service technicians should access the processor
  • Intel SRKA4 | Product Guide - Page 26
    SCSI Hard Drives The system supports Adaptec Ultra 160/m SCSI SCA type or slower hard drives that are (replace) a bad drive with a good one. If the operating system installed supports hot-swapping hard drives, the system DOES NOT need to be powered off. 26 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 27
    on. 3. Depress the handle lock with your thumb. 4. Gently pull the locking handle away from the chassis until the handle disengages. Removing and Installing User Serviceable Components 27
  • Intel SRKA4 | Product Guide - Page 28
    replace) a bad drive with a good one. If the operating system installed supports hot-swapping hard drives, the system DOES NOT need to be powered off. 2. Position the new carrier and drive assembly so that it engages the bay guide rails. 3. Gently push the drive into the bay. Swing the locking handle
  • Intel SRKA4 | Product Guide - Page 29
    Hot-plug PCI Add-in Boards The SRKA4 MP Server System supports six hot-plug PCI add-in boards. From the back of the server system, the six slots are shown in "Rear Panel I/O Ports and position. C. Rear retention latch in the closed position. Removing and Installing User Serviceable Components 29
  • Intel SRKA4 | Product Guide - Page 30
    of a burn, be careful when removing or installing baseboard components that are located near processors. CAUTION Slot covers must be installed on all vacant expansion slots. This maintains the must fit into the mating slot in the expansion slot frame. 30 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 31
    tools or parts were left inside or installing baseboard components that are located near processors. CAUTIONS Do not overload baseboard: Do jumpers or switches on the board according to the manufacturer's instructions. 9. If necessary, remove and save the expansion slot Serviceable Components 31
  • Intel SRKA4 | Product Guide - Page 32
    on your system or through the HW push-button. 16. Check that no left loose tools or parts were left inside the system. 17. Position the top cover over the chassis so that the rows earlier, and tighten them firmly. 19. Connect any external cables. 32 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 33
    Part II: Service Technician's Guide 5 A Detailed Description of Chassis Features 6 Removing and Installing System Components 7 Solving Problems 8 Technical Reference A Equipment Log and Configuration Worksheets B Regulatory and Environmental Specifications C Warnings 33
  • Intel SRKA4 | Product Guide - Page 34
    34 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 35
    so that it can be mounted on a rack. Contact your customer service representative for details on purchasing a rack adapter kit. For instructions on mounting the server in a rack, see the SRKA4/ISP4400 Server System Quick Start Guide accompanying your kit. Chassis Features The chassis has two covers
  • Intel SRKA4 | Product Guide - Page 36
    gives an overhead view of the system with the top cover and front bezel removed. E E3 D I E7 E6 E2 E5 C A1 A2 B E4 Figure 16. SRKA4 MP Server System Without Covers and Bezel H F G E1 OM09946 Figure 16a. Overhead View of System and E-Bay 36
  • Intel SRKA4 | Product Guide - Page 37
    hard drives. Hard drives are not installed as part of the system. If the operating system supports hot-swapping of hard drives, these drives can be changed without shutting down the server. C. Power Subsystem Installed: A power subsystem bay that supports up to three 350-watt power supply modules
  • Intel SRKA4 | Product Guide - Page 38
    SKA4 baseboard. The baseboard has the following major components: • Up to four Intel Pentium III Xeon processors • Server Set III HE chipset • Up to sixteen PC/100-compliant Registered ECC SDRAM memory modules that support the left of the E-Bay. 38 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 39
    SRKA4 MP Server System exceeds the 240 VA energy hazard limit that defines an operator-accessible area. Only qualified service technicians should access the processor, memory, power subsystem, and non hot-plug areas of the SKA4 The hard drive bay supports either one of the drives. As part of the hot
  • Intel SRKA4 | Product Guide - Page 40
    these manufacturers and hard drive types. The document can be found on http://support.intel.com/support/motherboards/server/SRKA4/compat.htm An LED above each hard drive displays the status of that hard SAF-TE features and hard drive failure indicators. 40 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 41
    to function normally, the server system cannot function properly, if at all. A minimal configuration supported by one module is one processor, four memory DIMMs, fully configured SRKA4 MP Server System. The third module provides redundancy. A fully configured system includes four processors, sixteen
  • Intel SRKA4 | Product Guide - Page 42
    with 15.0 A peak • -12 V at 0.5 A • +5 V standby at 2 A whenever AC power is supplied to the server system The DC output voltages of the power subsystem with two or three modules are: • +3.3 V at 50 A max (Total combined exceed two minutes in duration. 42 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 43
    240 VA energy hazard limit that defines an operator-accessible area. Only qualified service technicians should access the processor, memory, power subsystem, and non hot-plug areas of the SKA4 baseboard. System Cooling The SRKA4 MP Server System uses up to six fans mounted in a fan board assembly in
  • Intel SRKA4 | Product Guide - Page 44
    airflow patterns are disrupted within the system. The Baseboard Management Controller (BMC) firmware on the SKA4 baseboard polls the fans for status once every two minutes. Therefore, the BMC does NOT detect must be on the system for proper cooling. 44 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 45
    manufacturers and memory modules and can be found on http://support.intel.com/support/motherboards/server/SKA4/compat.htm For more information on SKA4 baseboard components, see the SKA4 Baseboard Product Guide contained in your server software kit. A Detailed Description of Chassis Features 45
  • Intel SRKA4 | Product Guide - Page 46
    contact, this button puts an operating system supporting ACPI mode to sleep (S1). When becomes active. This system does not have a service mode. D. Front panel LEDs from left to server. Flashing green indicates that the system is in ACPI sleep mode. 46 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 47
    Rear Panel I/O Ports and Features AB ON M LK I GF E JH D C OM10263 Figure 22. Rear Panel I/O Ports and Features A. AC input power connector B. Two optional external SCSI connector ports The figure shows only one connector port, but your system has two C. Hot-plug 64-bit, 33 MHz PCI add-in
  • Intel SRKA4 | Product Guide - Page 48
    48 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 49
    no user-serviceable parts inside it; servicing should be done by technically qualified personnel. The total power requirement for the SRKA4 MP Server System exceeds the 240 VA energy hazard limit that defines an operator-accessible area. Only qualified service technicians should access the processor
  • Intel SRKA4 | Product Guide - Page 50
    in place for an extended period of time can damage system parts. Removal of the top cover for an extended period of time: If the SRKA4 MP Server System is turned on and has only three fans installed, . 5. Lift the front cover up and out of the chassis. 50 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 51
    2. Before replacing the front cover, check that no left loose tools or parts are left inside the system. 3. Check that cables and other components are extension boards, memory slots, Voltage Regulator Modules (VRMs), and processors • Exchanging individual fans • Removing and installing the fan board
  • Intel SRKA4 | Product Guide - Page 52
    Memory Retention Bar When accessing SKA4 baseboard components, you need to remove and install the memory retention bar. Removing the Memory Retention Bar 1. Secure the other side of the memory retention bar with the captive screw as shown in Figure 23. 52 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 53
    require this guide and the SKA4 Baseboard Product Guide. Before continuing, make sure that both product guides are readily available. When this guide directs you to a procedure in the either the SRKA4/ISP4400 Server System Product Guide or the SKA4 Baseboard Product Guide, read the procedure
  • Intel SRKA4 | Product Guide - Page 54
    SKA4 Baseboard Product Guide for instructions. 15. Remove the processors and any termination processors. See the SKA4 Baseboard Product Guide for instructions. 16. Remove the processor retention guides. See the SKA4 Baseboard Product Guide for instructions SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 55
    away, make sure that the power cord does not become wedged between the two parts of the chassis. 22. Remove the rug from the E-Bay. 23. become wedged between the two parts of the chassis. 4. Hold the baseboard on the side closest to the VRM connectors and processors. Slip the baseboard under the
  • Intel SRKA4 | Product Guide - Page 56
    become wedged between the two parts of the chassis. 8. Attach processor retention guides. See the SKA4 Baseboard Product Guide for instructions. 13. Install the processors and any termination processors. See the SKA4 Baseboard Product Guide for instructions SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 57
    memory board. See the SKA4 Baseboard Product Guide for instructions. 19. Install the instructions on installing the memory retention bar, see "Installing the Memory Retention Bar" on page 52. Finally, boot the server system so that the hardware changes you made are recognized by the SRKA4 MP Server
  • Intel SRKA4 | Product Guide - Page 58
    is still a problem with powering on the server system, turn off the system by using the power on/off switch on the front panel AND unplug all AC power cords. Remove the power subsystem bay and send it back to an Intel customer service SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 59
    the power subsystem. There are no user-serviceable parts inside it; servicing should be done by technically qualified personnel. This server can withstand normal levels of environmental ESD while hot-swapping SCSI hard drives. However, Intel recommends doing all procedures in this manual only
  • Intel SRKA4 | Product Guide - Page 60
    chassis retention features. 8. With the power supplies securely fastened, pull the power subsystem bay out of the chassis. 9. Before shipping the power subsystem bay for service, remove all power supplies. 60 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 61
    parts inside it; servicing should be done by technically qualified personnel. 1. Observe the safety and ESD precautions at the beginning of this chapter. 2. Remove the SKA4 in the front of the chassis. As you face the front of the server, the power subsystem bay is placed on the far left side. The
  • Intel SRKA4 | Product Guide - Page 62
    replacement procedure. Vacant spaces alter airflow patterns in the server system and may cause environmental conditions to exceed the environmental limits of the server. The fan board assembly is held in place by the screws is noted by "A" in Figure 30. 62 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 63
    A OM09956 Figure 30. One of Two Screws Securing the Fan Board Assembly 7. Lift the fan board assembly directly upward and rest it on the E-Bay assembly. 8. Disconnect the cables from the assembly. There are three cables. • One ribbon cable connects to the baseboard. • One ribbon cable connects to
  • Intel SRKA4 | Product Guide - Page 64
    secure the base to the rest of the fan assembly. 10. Install the fan board assembly. See "Installing a Fan Board Assembly" on page 63. 64 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 65
    the replacement procedure. Vacant spaces formerly occupied by fans alter air flow patterns in the server system and may cause environmental conditions to exceed the environmental limits of the server. 1. Observe the safety and ESD precautions at the beginning of this chapter. 2. Remove the front
  • Intel SRKA4 | Product Guide - Page 66
    SCSI hard drives. See "Removing a SCSI Hard Drive" on page 26. 6. With a flat head screwdriver, press the two tabs inward on one side. Repeat this instruction for the two tabs on the other side. The two tabs are noted by "A" in Figure 32. A OM09958 Figure 32. Two Tabs Securing the Hard
  • Intel SRKA4 | Product Guide - Page 67
    7. With a flat head screwdriver, pry the right side of the hard drive bay out of the chassis. OM09959 Figure 33. Removing the Hard Drive Bay From the Chassis 8. Install the fan board assembly. See "Installing a Fan Board Assembly" on page 63. 9. Install the top cover. See "Installing the Top Cover"
  • Intel SRKA4 | Product Guide - Page 68
    . 5. Insert and tighten the screw that secures the drive to the bay. 6. Install the front cover. See "Installing the Front Cover" on page 51. 68 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 69
    wrapper. 6. Slide the new drive into position using the guides in the device bay. 7. Connect the power and signal installed depends on: • The number supported by the bus • The number of termination, while CD-ROM drives do not. Because Intel recommends putting hard drives only in the internal bays
  • Intel SRKA4 | Product Guide - Page 70
    70 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 71
    /on Initial System Startup Problems that occur at initial system and secured? q Are the processors fully seated in their slots on or configured? q Are all device drivers properly installed? q Are the configuration off switch on the front panel to turn the server on (power-on light should be lit)?
  • Intel SRKA4 | Product Guide - Page 72
    device drivers installed? q Is the software correctly configured for the system? q Are you using the software correctly? q If the problems persist, contact the software vendor's customer service between the power outlet and the system power cords. 72 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 73
    the system? If so, check the items listed under "System Cooling Fans Do Not Rotate Properly." If all items are correct and problems persist, contact your service representative or authorized dealer for assistance. No Beep Codes If the system operates normally, but there was no beep, the speaker may
  • Intel SRKA4 | Product Guide - Page 74
    operating system? If the problem persists, the video monitor may be faulty or it may be the incorrect type. Contact your service representative or authorized dealer for wall outlet, contact your service representative or authorized dealer for assistance. 74 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 75
    Floppy" is set to "Disabled." To run the SSU, see the SKA4 Baseboard Product Guide. If the problem persists, there may be a problem with the diskette drive, baseboard, or drive signal cable. Contact your service representative or authorized dealer for assistance. Hard drive Activity Light Does Not
  • Intel SRKA4 | Product Guide - Page 76
    See the software installation and operation documentation for instructions on setting up and using the software. q Try a different copy of the software to see if the problem is with the copy you are using. q Make sure all cables are installed correctly. 76 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 77
    SKA4 Baseboard Product Guide for more information. q If other software runs correctly on the system, contact your vendor about the failing software. If the problem persists, contact the software vendor's customer service There are no processors present in the system, or the processors are so
  • Intel SRKA4 | Product Guide - Page 78
    78 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 79
    1 S/M Feature 1 SKA4 baseboard SKA4 baseboard Fan Distribution Board Intel® S/M card Narrow SCSI 1 SKA4 baseboard 5.25-inch device Floppy 1 SKA4 baseboard Floppy device IDE 1 SKA4 baseboard CD-ROM device HPIB 1 SKA4 baseboard HPIB board Auxiliary 4 Processor Fans SKA4 baseboard
  • Intel SRKA4 | Product Guide - Page 80
    SKA4 baseboard Main power 2 1 Power supply cage SKA4 baseboard Auxiliary power 1 Power supply cage SKA4 baseboard Slot 2 4 SKA4 baseboard Processor module Memory 1 SKA4 baseboard SKA4 memory module DIMM 16 SKA4 Recommend 3-pin SJT power cord 80 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 81
    Connectors Accessible to the User Keyboard and Mouse Ports These identical PS/2 compatible ports share a common housing. The top one is the mouse and the bottom one is the keyboard. Table 8. Keyboard and Mouse Connectors Mouse Keyboard Pin Signal Pin Signal 1 MSEDAT (mouse data) 1 KEYDAT
  • Intel SRKA4 | Product Guide - Page 82
    B) 4 NC 5 GND 6 GND 7 GND 8 GND 9 Fused VCC (+5V) 10 GND 11 NC 12 DDCDAT 13 HSYNC (horizontal sync) 14 VSYNC (vertical sync) 15 DDCCLK 82 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 83
    externally access chassis management functions, alert logs, post-mortem data, etc. It also provides a mechanism for chassis power control. Optionally, the server can be configured with an ICMB adapter board. This board provides two SEMCONN 6-pin connectors to allow daisy chained cabling. Table 13
  • Intel SRKA4 | Product Guide - Page 84
    Ethernet Connector The system supports one Intel® 82557 based on board Ethernet connection. Table 14. Ethernet Connector Pin ) +DB(9) +DB(8) +I/O +REQ +C/D +SEL Connector Contact (L) (L) (L) (S) (L) (L) (S) (S) (S) (S) (S) (S) (S) (S) continued 84 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 85
    Table 15. Internal SCA-2 HDD Connector (continued) Pin Signal Connector Contact Pin Signal 15 -MSG (S) 55 +MSG 16 -RST (S) 56 +RST 17 -ACK (S) 57 +ACK 18 -BSY (S) 58 +BSY 19 -ATN (S) 59 +ATN 20 -DB(P) (S) 60 +DB(P) 21 -DB(7) (S) 61 +DB(7) 22 -DB(6) (S) 62
  • Intel SRKA4 | Product Guide - Page 86
    External Adaptec Ultra 160/m SCSI As an option, the server system can support a shielded external SCSI connection. This connection is on Channel B of the Adaptec AIC-7899 SCSI Ultra DP(9) 66 DM(9) 33 -DP(10) 67 -DM(10) 34 -DP(11) 68 -DM(11) 86 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 87
    AC Power Input A single IEC320-C13 receptacle is provided at the rear of the server. It is recommended to use an appropriately sized power cord and AC main. Peripheral Adapter Boards and Connectors The peripheral adapter boards convert the 50
  • Intel SRKA4 | Product Guide - Page 88
    20 DD15 45 GND 21 DD0 46 GND 22 DMARQ 47 CSEL 23 GND 48 GND 24 /DIOR 49 RESERV 25 DIOW- 50 RESERV 88 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 89
    Floppy Connectors Table 21. 34-Position Floppy Connector Pin-out Pin Signal Pin Signal 1 NC 18 Direction Select HD IN/ HD 19 2 Out/ Open GND 3 NC 20 STEP 4 NC 21 GND 5 NC 22 Write Data 6 NC 23 GND 7 GND 24 Write Gate 8 FD_INDEX_L 25 GND 9 GND 26 Track 00 10
  • Intel SRKA4 | Product Guide - Page 90
    ) 22 WRITE PROTECT 10 MOTOR ON 23 GND 11 NC 24 READ DATA DIRECT 12 SELECT 25 GND 13 NC 26 SIDE ONE SELECT 90 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 91
    may be required when running the System Setup Utility (SSU). Item System Manufacturer Name and Model Number Serial Number Date Installed Baseboard Processor speed and cache Video display Keyboard Mouse Diskette drive A Diskette drive B Tape drive CD-ROM drive Hard drive 1 Hard drive
  • Intel SRKA4 | Product Guide - Page 92
    . Referring to the filled-in worksheets could make your task easier. Circle or write in your selections or the values that are displayed onscreen. 92 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 93
    total power use for a specific server configuration. The spreadsheet breaks down your system into many categories and automatically calculates power use on the "Summary" page. Categories include: • Serverboard configuration • Intel® chassis • Processors • Memory • PCI • SCSI • Peripherals • System
  • Intel SRKA4 | Product Guide - Page 94
    12 3PS (2 + redundancy) 25.90 19.51 4.45 0.93 139.88
  • Intel SRKA4 | Product Guide - Page 95
    in each direction on each of the three axes per Intel environmental test specifications Acoustic noise < 55 dBA with three power Hz 200-240 V∼, 4 A, 50/60 Hz Product Regulatory Compliance The SRKA4/ISP4400 complies with the following safety and electromagnetic compatibility (EMC) regulations.
  • Intel SRKA4 | Product Guide - Page 96
    undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation 5200 N.E. Elam Young Parkway Hillsboro, OR 97124 1-800-628-8686 This equipment • Increase the separation between the equipment and the receiver. 96 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 97
    and TV reception. FCC Verification Statement Product Type: SRKA4, ISP4400 This device complies with Part 15 of the FCC Rules. Operation is subject For questions related to the EMC performance of this product, contact: Intel Corporation 5200 N.E. Elam Young Parkway Hillsboro, OR 97124-6497 Phone: 1
  • Intel SRKA4 | Product Guide - Page 98
    used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. BSMI (Taiwan) The BSMI Certification number and the following warning is located on the product safety label which is located on the
  • Intel SRKA4 | Product Guide - Page 99
    C Warnings WARNING: English (US) AVERTISSEMENT : Français WARNUNG: Deutsch AVVERTENZE: Italiano ADVERTENCIAS: Español 99
  • Intel SRKA4 | Product Guide - Page 100
    (US) The power supply in this product contains no user-serviceable parts. There may be more than one supply in this product. Refer servicing only to qualified personnel. Do not attempt to modify or use and the AC power cord to the system. continued 100 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 101
    Also, there may be sharp pins and edges on some board and chassis parts. Contact should be made with care. Consider wearing protective gloves. Danger of the equipment manufacturer. Discard used batteries according to manufacturer's instructions. The system is designed to operate in a typical office
  • Intel SRKA4 | Product Guide - Page 102
    les panneaux du boîtier avec les vis retirées plus tôt. 4. Rebranchez le cordon d'alimentation CA et les câbles externes au système. suite 102 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 103
    uniquement par une batterie du même type ou de type équivalent recommandé par le fabricant. Débarrassez-vous des piles usagées selon les instructions du fabricant. Le système a été conçu pour fonctionner dans un cadre de travail normal. L'emplacement choisi doit être : • Propre et dépourvu de poussi
  • Intel SRKA4 | Product Guide - Page 104
    Schrauben am Gehäuse, und ziehen Sie sie fest an. 4. Schließen Sie alle externen Kabel und das Netzkabel Ihres Systems wieder an. Fortsetzung 104 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 105
    WARNUNG: Deutsch (Fortsetzung) Mikroprozessor und Kühlkörper können heiß sein, wenn das System längere Zeit eingeschaltet war. Außerdem können einige Platinen und Gehäuseteile scharfe Spitzen und Kanten aufweisen. Arbeiten an Platinen und Gehäuse sollten vorsichtig ausgeführt werden. Sie sollten
  • Intel SRKA4 | Product Guide - Page 106
    un'etichetta e scollegare tutti i cavi collegati ai connettori I/O o alle porte sulla parte posteriore del sistema. 5. Assicurare un minimo di protezione da scariche elettrostatiche (ESD), i cavi esterni e il cavo di alimentazione al sistema. continua 106 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 107
    AVVERTENZA: Italiano (continua) Se il sistema è stato a lungo in funzione, il microprocessore e il dissipatore di calore potrebbero essere surriscaldati. Fare attenzione alla presenza di piedini appuntiti e parti taglienti sulle schede e sul telaio. Prestare attenzione durante l'esecuzione dei
  • Intel SRKA4 | Product Guide - Page 108
    desconecte todos los cables enchufados a los conectores E/S o a los puertos situados en la parte posterior del sistema. 5. Cuando manipule los componentes, es importante protegerse contra la descarga y el cable de alimentación CA al sistema. continúa 108 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 109
    instrucciones del fabricante. Text El sistema está diseñado para funcionar en un entorno de trabajo normal. Escoja un lugar: • Limpio y libre de partículas en suspensión (salvo el polvo normal). • Bien ventilado y alejado de fuentes de calor, incluida la luz solar directa. • Alejado de fuentes de
  • Intel SRKA4 | Product Guide - Page 110
    110 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 111
    71 buttons power on/off, 18, 46 reset, 18, 46 sleep/service, 18, 46 C cables, drives, requirements, 69 Caution ESD protection, 25 outputs, 42 device bay description, 13, 14, 37, 39 replacing a drive, 69 diskette, media supported, 14, 39 drive cable requirements, 69 CD-ROM, 13, 14, 37, 39 DAT device,
  • Intel SRKA4 | Product Guide - Page 112
    error and informational, 77 mouse connector at back panel, 19, 47 connector description, 81 N network, problems with network, 76 NIC RJ45 connector, 19, 47 P parallel connector, 19, 47 parallel port, 82 37, 41, 58 calculating power usage, 93 redundancy, 41 SRKA4/ISP4400 Server System Product Guide
  • Intel SRKA4 | Product Guide - Page 113
    module installing, 60 removing, 59 problems after running new application software, 72 system cooling fans do not rotate, 74 processors, 38 R redundancy cooling, 43 power subsystem 38 serial port, 81 service, no user-serviceable parts, power supply, 60, 61 sleep/service button, 18, 46 switches,
  • Intel SRKA4 | Product Guide - Page 114
    114 SRKA4/ISP4400 Server System Product Guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
SRKA4/ISP4400
Server System
Product Guide
Order Number:
A07928-003