Intel WSAP5000 Quick Installation Guide
Intel WSAP5000 - PRO/Wireless 5000 LAN Access Point Manual
 |
View all Intel WSAP5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Intel WSAP5000 manual content summary:
- Intel WSAP5000 | Quick Installation Guide - Page 1
Intel® PRO/Wireless 5000 LAN Products Quick Installation Guide - Intel WSAP5000 | Quick Installation Guide - Page 2
assumes no responsibility for errors or omissions in this document. Nor does Intel make any commitment to update the information contained herein. Intel is a registered trademark of Intel Corporation. *Other product and corporate names may be trademarks of other companies and are used only for - Intel WSAP5000 | Quick Installation Guide - Page 3
Table of Contents Installing the Access Point 5 Installing the CardBus Adapter 14 Installing the PCI Adapter 18 Customer Support 20 3 - Intel WSAP5000 | Quick Installation Guide - Page 4
Installation Guide for the following Intel® PRO/Wireless LAN products: PRO/Wireless LAN Access Points • Model WDAP5000 - dual-function access point supporting both 802.11a and 802.11b wireless networks • Model WSAP5000 - single-function access point supporting 802.11a wireless networks; upgradeable - Intel WSAP5000 | Quick Installation Guide - Page 5
Installing the Access Point Package Contents • Intel® PRO/Wireless LAN Access Point (model WDAP5000, WSAP5000, or WSAP2000) • Mounting hardware • Power supply and power cord • CD-ROM containing software and online documentation • Quick Installation Guide (this manual) Installation Options and - Intel WSAP5000 | Quick Installation Guide - Page 6
which models use which set or sets. Viewed on a wall- or ceiling-mounted access point, the LED indicators have the following locations and functions. Ready Wireless radio activity (802.11a) Wireless radio association (802.11a) Wireless radio activity (802.11b) Wireless radio association (802.11b - Intel WSAP5000 | Quick Installation Guide - Page 7
the Express Setup button, then type a user name and a password. The default for both is: Intel. The password is case-sensitive: capital "I," lower case "ntel." 7. Use Express Setup to configure the access point with a new IP address, subnet, and other settings suitable for the network to which it - Intel WSAP5000 | Quick Installation Guide - Page 8
the network to which the access point is connected. All access points and client workstations on the same wireless LAN must have the same SSID, which can be any combination of letters and numbers up to 32 characters. Default for Intel PRO/Wireless LAN 802.11a and 802.11b devices is "101." The - Intel WSAP5000 | Quick Installation Guide - Page 9
for the protection of data on their networks. For information on how to configure these features, view the online user guide and the AP Help file contained on the Intel CD-ROM. Use DHCP to Obtain Network Addresses (Optional) The Intel PRO/Wireless 5000 LAN Access Point can be configured to - Intel WSAP5000 | Quick Installation Guide - Page 10
Default gateway User Password SSID 11A WEP 11A SSID 11B WEP 11B WSAP5000 (or the model number of your access point) 192.0.2.1 255.255.0.0 None Intel (case sensitive) Intel (case sensitive) 101 Disabled 101 Disabled Set Up a Wireless LAN For detailed information on site survey, setup, positioning - Intel WSAP5000 | Quick Installation Guide - Page 11
the following guidelines and illustrations. For best throughput and range, install the access point as high as practical. Desktop or Table Top Location Set the access point on a flat surface such as a table or desk. If the access point is positioned on a desk or table, the antenna should be on top - Intel WSAP5000 | Quick Installation Guide - Page 12
a wall near the ceiling, it should be positioned with the antenna on the bottom (as shown in the illustrations that follow). If the access point is mounted at a lower point on the wall, it should be positioned with the antenna on the top (see the illustration for Desk or Table Top location; the - Intel WSAP5000 | Quick Installation Guide - Page 13
Connect Wall or Ceiling Mounted Access Point to Network and AC Power The illustration below shows a typical placement of power and network cables. Refer to the heading Connect and Power Up the Access Point for detailed instructions. 13 - Intel WSAP5000 | Quick Installation Guide - Page 14
Intel® PRO/Wireless 5000 LAN CardBus Adapter (model WCB5000) • CD-ROM containing software and user documentation • Quick Installation Guide (this manual problems during the installation. The Intel® PROSet II utility or Windows XP can be used to configure wireless network settings. The instructions - Intel WSAP5000 | Quick Installation Guide - Page 15
searches for the correct driver files and copies them to your hard drive. If the Intel® PRO Network Connections menu screen appears wireless network settings, then click OK on the Wireless Network tab. Do not click any other tabs. • In the LAN or High-Speed Internet window right-click the Wireless - Intel WSAP5000 | Quick Installation Guide - Page 16
a new profile. Type a configuration name and the SSID for your wireless network. Set up security and other parameters if required. Consult your network driver (Recommended) is checked. • Insert the Intel CD-ROM into your CD-ROM drive. Windows installs the driver from the CD-ROM. If the Intel® PRO - Intel WSAP5000 | Quick Installation Guide - Page 17
Type a configuration name and the SSID for your wireless network. Set up security and other parameters if restart the computer, click No. Proceed to Step 4. Restart manually after completing software installation. 4. On the Intel® PRO Network Connections screen, click the menu item Install Software. - Intel WSAP5000 | Quick Installation Guide - Page 18
• Intel® PRO/Wireless 5000 LAN PCI Adapter (model WPCI5000) • CD-ROM containing software and user documentation • Quick Installation Guide (this manual) Hardware Installation Caution: Do not attempt to remove 1. the antenna. The antenna is permanently attached to the Intel® PRO/Wireless 5000 PCI - Intel WSAP5000 | Quick Installation Guide - Page 19
Typical installation, standard case Typical installation, tower case Windows* Installation 1. Install the PCI Adapter hardware according to the illustrations shown, then close and secure the computer case. 2. Turn on power to the computer and wait for Windows* to load. (Windows XP, 2000, Me, or 98SE - Intel WSAP5000 | Quick Installation Guide - Page 20
Web and Internet Sites • Support: http://support.intel.com • Network Products: http://www.intel.com/network • Corporate: http://www.intel.com Customer Support Technicians For the U.S. and Canada If you are using this product in conjunction with Intel® PRO/Wireless 5000 LAN hardware in a business or
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
Intel® PRO/Wireless 5000
LAN Products
Quick Installation Guide