Intel blkdp43tf Product Specification

Intel blkdp43tf Manual

Get Intel blkdp43tf PDF manuals and user guides View all Intel blkdp43tf manuals
Add to My Manuals
Save this manual to your list of manuals

Intel blkdp43tf manual content summary:

  • Intel blkdp43tf | Product Specification - Page 1
    Specification July 2008 Order Number: E41955-001US The Intel® Desktop Board DP43TF may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board DP43TF Specification
  • Intel blkdp43tf | Product Specification - Page 2
    Intel® Desktop Board DP43TF Technical Product Specification Date July 2008 This product specification applies to only the standard Intel® Desktop Board DP43TF with BIOS identifier NBG4310A.86A. Changes to this specification will be published in the Intel Desktop Board DP43TF Specification Update
  • Intel blkdp43tf | Product Specification - Page 3
    intended to provide detailed, technical information about the Intel Desktop Board DP43TF and its components to the vendors, system integrators, and other engineers and technicians who need this level of information. It is specifically not intended for general audiences. What This Document Contains
  • Intel blkdp43tf | Product Specification - Page 4
    Intel Desktop Board DP43TF Technical Product Specification Other Common Notation # GB GB/sec Gbit KB Kbit kbits/sec MB MB/sec Mbit Mbit/sec xxh x.x V * Used after a signal name to identify an active-low signal (such as USBP0#) Gigabyte (1,073,741,824 bytes) Gigabytes per
  • Intel blkdp43tf | Product Specification - Page 5
    Contents 1 Product Description 9 1.1 Overview 9 1.1.1 Feature Summary 9 1.1.2 Board Layout 11 1.1.3 Block Diagram 13 1.2 Legacy Considerations 14 1.3 Online Support 14 1.4 Processor 14 1.5 System Memory 15 1.5.1 Memory Configurations 17 1.6 Intel® P43 Express Chipset 19 1.6.1 PCI Express
  • Intel blkdp43tf | Product Specification - Page 6
    Intel Desktop Board DP43TF Technical Product Specification 2.4 Mechanical Considerations 52 2.4.1 Form Factor 52 2.5 Electrical Considerations 53 2.5.1 Power Supply Considerations 53 2.5.2 Fan Header Current Capability 54 2.5.3 Add-in Board Considerations 54 2.6 Thermal Considerations 54 2.7
  • Intel blkdp43tf | Product Specification - Page 7
    9 Table 2. Board Components Shown in Figure 1 12 Table 3. Supported Memory Configurations 15 Table 4. Audio Jack Support 24 Table 5. LAN Intel HD Audio 45 Table 19. Front Panel Audio Header for AC '97 Audio 45 Table 20. Auxiliary Front Panel Power/Sleep LED Header 46 Table 21. Processor Core
  • Intel blkdp43tf | Product Specification - Page 8
    Current Values 53 Table 29. Fan Header Current Capability 54 Table 30. Thermal Considerations for Components 56 Table 31. Intel® Desktop Board DP43TF Environmental Specifications 57 Table 32. BIOS Setup Program Menu Bar 60 Table 33. BIOS Setup Program Function Keys 60 Table 34. Acceptable
  • Intel blkdp43tf | Product Specification - Page 9
    of the Intel Desktop Board DP43TF. Table 1. Feature Summary Form Factor ATX (11.60 inches by 9.60 inches [294.60 millimeters by 243.84 millimeters]) Processor Memory Chipset Support for the following: • Intel® Core™2 Quad processor in an LGA775 socket • Intel® Core™2 Duo processor in an
  • Intel blkdp43tf | Product Specification - Page 10
    Intel Desktop Board DP43TF Technical Product Specification Table 1. Feature Summary (continued) Expansion Capabilities Hardware Monitor Subsystem • Three PCI Conventional bus connectors • Three PCI Express x1 bus add-in card connector • One PCI Express x16 bus add-in card connector • Intel® Quiet
  • Intel blkdp43tf | Product Specification - Page 11
    1.1.2 Board Layout Figure 1 shows the location of the major components. Product Description Figure 1. Major Board Components Table 2 lists the components identified in Figure 1. 11
  • Intel blkdp43tf | Product Specification - Page 12
    Intel Desktop Board DP43TF Technical Product Specification Table 2. Board Components Shown in Figure 1 Item/callout from Figure header L Back panel connectors M Processor core power connector (2 X 2) N Processor fan header O LGA775 processor socket P Intel 82P43 MCH Q DIMM Channel A
  • Intel blkdp43tf | Product Specification - Page 13
    1.1.3 Block Diagram Figure 2 is a block diagram of the major functional areas. Product Description Figure 2. Block Diagram 13
  • Intel blkdp43tf | Product Specification - Page 14
    support.intel.com/support/motherboards/desktop/sb/CS025414.htm 1.4 Processor The board is designed to support the following processors: • Intel Core 2 Quad processor in an LGA775 socket • Intel Core 2 Duo processor in an LGA775 socket • Intel Pentium Dual-Core processor in an LGA775 socket • Intel
  • Intel blkdp43tf | Product Specification - Page 15
    on the total amount of addressable memory. • Minimum total system memory: 512 MB • Non-ECC DIMMs • Serial Presence Detect • DDR2 667 MHz or DDR2 compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD)
  • Intel blkdp43tf | Product Specification - Page 16
    Intel Desktop Board DP43TF Technical Product Specification For information about... Tested Memory Refer to: http://support.intel.com/support/motherboards/desktop/sb/ CS-025414.htm 16
  • Intel blkdp43tf | Product Specification - Page 17
    Product Description 1.5.1 Memory Configurations The Intel 82P43 MCH supports the following types of memory organization: • Dual channel (Interleaved) mode. . For information about... Memory Configuration Examples Refer to: http://www.intel.com/support/motherboards/desktop/sb/cs011965.htm 17
  • Intel blkdp43tf | Product Specification - Page 18
    Intel Desktop Board DP43TF Technical Product Specification Figure 3 illustrates the memory channel and DIMM configuration. NOTE The DIMM 0 sockets of both channels are blue , or flex mode), DIMM 0 of Channel A must always be populated. This is a requirement of the Intel Management Engine in ICH10. 18
  • Intel blkdp43tf | Product Specification - Page 19
    ICH10 is a centralized controller for the board's I/O paths. The chipset supports the following features: • USB • Serial ATA • Parallel IDE For information about The Intel P43 Express chipset Resources used by the chipset Refer to http://www.intel.com/products/desktop/chipsets/index.htm Chapter
  • Intel blkdp43tf | Product Specification - Page 20
    Intel Desktop Board DP43TF Technical Product Specification 1.6.2 USB The board supports up to twelve USB 2.0 ports, supports UHCI and EHCI, and uses UHCI- and EHCI-compatible drivers. The ICH10 provides the USB controller for all ports. The port arrangement is as follows: • Six ports are
  • Intel blkdp43tf | Product Specification - Page 21
    • 8237-style DMA: DMA offloads the processor, supporting transfer rates of up to 16 MB/sec. • Ultra DMA: DMA protocol on IDE bus supporting host and target throttling and transfer rates of up to 33 MB/sec. • ATA-66: DMA protocol on IDE bus supporting host and target throttling and transfer rates of
  • Intel blkdp43tf | Product Specification - Page 22
    Intel Desktop Board DP43TF Technical Product Specification 1.8 Real-Time Clock Subsystem A coin-cell battery (CR2032) located on the component side of the board. The serial port supports data transfers at speeds up to 115.2 kbits/sec with BIOS support. For information about The location of the
  • Intel blkdp43tf | Product Specification - Page 23
    Keyboard and Mouse Interface The PS/2 keyboard and mouse connectors are located on the back panel. NOTE The keyboard is supported in the bottom PS/2 connector and the mouse is supported in the top PS/2 connector. Power to the computer should be turned off before a keyboard or mouse is connected or
  • Intel blkdp43tf | Product Specification - Page 24
    Intel Desktop Board DP43TF Technical Product Specification 1.10 Audio Subsystem The onboard audio subsystem consists of the following: • Intel 82801JIB (ICH10) • Realtek ALC888VC audio codec • Back panel audio connectors • Component-side audio header: ⎯ Intel® High Definition Audio front panel
  • Intel blkdp43tf | Product Specification - Page 25
    1.10.1 Audio Subsystem Software Audio software and drivers are available from Intel's World Wide Web site. For information about Obtaining audio software and drivers Refer to Section 1.2, page 14 1.10.2 Audio Connectors and Headers The board contains audio connectors on the back panel and
  • Intel blkdp43tf | Product Specification - Page 26
    Intel Desktop Board DP43TF Technical Product Specification 1.11 LAN Subsystem The LAN subsystem consists of the following: • Intel 82567V Gigabit Ethernet Controller (10/100/1000 Mbits/sec) • Intel 82801JIB (ICH10) • RJ-45 LAN connector with integrated status LEDs Additional features of the LAN
  • Intel blkdp43tf | Product Specification - Page 27
    LAN software and drivers are available from Intel's World Wide Web site. For information about Obtaining LAN software and drivers Refer to Section 5. LAN Connector LED Locations Table 5 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 5. LAN
  • Intel blkdp43tf | Product Specification - Page 28
    Intel Desktop Board DP43TF Technical Product Specification 1.12 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including the following: • Fan
  • Intel blkdp43tf | Product Specification - Page 29
    .4 Thermal Monitoring Figure 6 shows the locations of the thermal sensors and fan headers. Item A B C D E F G Description Rear chassis fan Processor fan Thermal diode, located on processor die Thermal diode, located on the MCH die Front chassis fan Thermal diode, located on the ICH10 die Auxiliary
  • Intel blkdp43tf | Product Specification - Page 30
    Intel Desktop Board DP43TF Technical Product Specification 1.13 Power Management Power management is implemented at several levels, including: • Software support through Advanced Configuration and Power Interface (ACPI) • Hardware support: ⎯ Power connector ⎯ Fan headers ⎯ LAN wake capabilities ⎯
  • Intel blkdp43tf | Product Specification - Page 31
    supported by the board along with the associated system power targets. See the ACPI specification W G1 - sleeping state S1 - Processor stopped C1 - stop grant G1 - Service can be performed safely. Notes: 1. Total system power is dependent on the system configuration, including add-in boards
  • Intel blkdp43tf | Product Specification - Page 32
    Intel Desktop Board DP43TF Technical Product Specification 1.13.1.2 Wake-up Devices and Events Table 8 lists the devices or specific events that can wake the computer from specific provides full ACPI support. In addition, software, drivers, and peripherals must fully support ACPI wake events. 32
  • Intel blkdp43tf | Product Specification - Page 33
    do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options. The board provides several power management hardware features, including: • Power connector • Fan headers • LAN wake capabilities • Instantly Available PC
  • Intel blkdp43tf | Product Specification - Page 34
    Intel Desktop Board DP43TF Technical Product Specification 1.13.2.2 Fan Headers The function/operation of the fan headers is as follows: • The fans are on when the board is in the S0 state. • The fans are off when the board is off or in the S3, S4, or S5 state. • The processor the board supports LAN
  • Intel blkdp43tf | Product Specification - Page 35
    Power Management Interface Specification. Add-in boards that also support this specification can participate in power management and can be used to wake the computer. The use of Instantly Available PC technology requires operating system support and PCI 2.3 compliant add-in cards and drivers. 1.13
  • Intel blkdp43tf | Product Specification - Page 36
    Intel Desktop Board DP43TF Technical Product Specification 1.13.2.9 +5 V Standby Power Indicator LED The +5 V standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 7
  • Intel blkdp43tf | Product Specification - Page 37
    Technical Reference 2.1 Memory Map 2.1.1 Addressable Memory The board utilizes 8 GB of addressable system memory. Typically and PCI Express add-in cards • Intel® Management Engine (Intel® ME) support (6 MB) • Base graphics memory support (1 MB or 8 MB) NOTE System resources and hardware (such
  • Intel blkdp43tf | Product Specification - Page 38
    Intel Desktop Board DP43TF Technical Product Specification The amount of installed memory that can be used Upper 4 GB of address space ~20 MB PCI Memory Range contains PCI, chipsets, Direct Media Interface (DMI), and ICH ranges (approximately 750 MB) DRAM Range DOS Compatibility Memory Top of
  • Intel blkdp43tf | Product Specification - Page 39
    800 K - 896 K E0000 - EFFFF C8000 - DFFFF 640 K - 800 K 639 K - 640 K 512 K - 639 K 0 K - 512 K A0000 - C7FFF 9FC00 - 9FFFF 80000 - 9FBFF 00000 - 7FFFF Size 8191 MB 64 KB 64 KB 96 KB 160 KB 1 KB 127 KB 512 KB Description Extended memory Runtime BIOS Reserved Potential available high DOS memory
  • Intel blkdp43tf | Product Specification - Page 40
    Intel Desktop Board DP43TF Technical Product Specification 2.2 Connectors and Headers CAUTION Only the Use shielded cable that meets the requirements for full-speed devices. This section describes the board's connectors and headers. The connectors and headers can be divided into these groups: •
  • Intel blkdp43tf | Product Specification - Page 41
    Technical Reference 2.2.1 Back Panel Connectors Figure 9 shows the locations of the back panel connectors. Item A B C D E F G H I J Description PS/2 mouse port PS/2 keyboard port IEEE 1394a port USB ports [2] USB ports [2] LAN USB ports [2] Line in Mic in Line out Figure 9. Back Panel Connectors
  • Intel blkdp43tf | Product Specification - Page 42
    Intel Desktop Board DP43TF Technical Product Specification 2.2.2 Component-side Connectors and Headers Figure 10 shows the locations of the component-side connectors and headers. Figure 10. Component-side Connectors and Headers 42
  • Intel blkdp43tf | Product Specification - Page 43
    header H PCI Express x1 connector I PCI Express x16 connector J PCI Express x1 connector K Rear chassis fan header L Processor core power connector (2 X 2) M Processor fan header N Main Power connector (2 X 12) O Front chassis fan header P Parallel ATA IDE connector Q Serial port
  • Intel blkdp43tf | Product Specification - Page 44
    Intel Desktop Board DP43TF Technical Product Specification 2.2.2.1 Signal Tables for the Connectors and Headers Table 11. HD Audio Link Header Pin Signal Name 1 BCLK 3 RST# 5 SYNC 7 SDO 9 SDI0 11 SDI1 13 Not
  • Intel blkdp43tf | Product Specification - Page 45
    Fan Header Pin Signal Name 1 Ground 2 +12 V 3 FAN_TACH 4 FAN_CONTROL Table 17. Processor Fan Header Pin Signal Name 1 Ground 2 +12 V 3 FAN_TACH 4 FAN_CONTROL Table 18. Front Panel Audio Header for Intel HD Audio Pin Signal Name Pin Signal Name 1 [Port 1] Left channel
  • Intel blkdp43tf | Product Specification - Page 46
    Intel Desktop Board DP43TF Technical Product Specification 2.2.2.2 Add-in Card Connectors The board has the following add-in card connectors: • One PCI Express 2.0 x16 connector: ⎯ Supports PCI Express 1.1 frequency of 1.25 GHz resulting in 2.5 Gb/s each direction (500 MB/s total). The maximum
  • Intel blkdp43tf | Product Specification - Page 47
    is compatible with 2 x 10 connectors previously used on Intel Desktop boards. The board supports the use of ATX12V power supplies with either 2 x 10 be used. Failure to do so will prevent the board from booting. Table 21. Processor Core Power Connector Pin Signal Name Pin Signal Name 1
  • Intel blkdp43tf | Product Specification - Page 48
    Intel Desktop Board DP43TF Technical Product Specification 2.2.2.5 Front Panel Header This section describes the functions of the front panel header. Table 23 lists the signal names of the front panel header. Figure
  • Intel blkdp43tf | Product Specification - Page 49
    Table 25 are suggested colors only. Actual LED colors are chassis-specific. 2.2.2.5.4 Power Switch Header Pins 6 and 8 can be connected off. (The time requirement is due to internal debounce circuitry on the board.) At least two seconds must pass before the power supply will recognize another
  • Intel blkdp43tf | Product Specification - Page 50
    Intel Desktop Board DP43TF Technical Product Specification 2.2.2.7 Front Panel USB Headers Figure 12 is a is fused. • Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 12. Connection Diagram for Front Panel USB Headers 2.2.2.8
  • Intel blkdp43tf | Product Specification - Page 51
    power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 14 shows the location of the jumper block to configure mode and the computer is powered-up, the BIOS compares the processor version and the microcode version in the BIOS and reports if the two
  • Intel blkdp43tf | Product Specification - Page 52
    Intel Desktop Board DP43TF Technical Product Specification 2.4 Mechanical Considerations 2.4.1 Form Factor The board is designed to fit into an ATX-form-factor chassis. Figure 15 illustrates the mechanical form factor of the board. Dimensions are given in inches [millimeters]. The outer dimensions
  • Intel blkdp43tf | Product Specification - Page 53
    parameters of the ATX form factor specification. • The potential relation between 3.3 VDC and +5 VDC power rails • The current capability of the +5 VSB line • All timing parameters • All voltage tolerances For example, for a system consisting of a supported 65 W processor (see Section 1.4 on page 14
  • Intel blkdp43tf | Product Specification - Page 54
    Intel Desktop Board DP43TF Technical Product Specification 2.5.2 Fan Header Current Capability CAUTION The processor fan must be connected to the processor fan header, not to a chassis fan header. Connecting the processor fan to a chassis fan header may result in onboard component damage that will
  • Intel blkdp43tf | Product Specification - Page 55
    so may result in damage to the voltage regulator circuit. The processor voltage regulator area (shown in Figure 16) can reach a temperature zones. Item A B C D Description Processor voltage regulator area Processor Intel 82P43 MCH Intel 82801JIB (ICH10) Figure 16. Localized High Temperature Zones
  • Intel blkdp43tf | Product Specification - Page 56
    Intel Desktop Board DP43TF Technical Product Specification Table 30 provides maximum case temperatures for the board components that are sensitive to thermal changes. The operating temperature, current load, or operating frequency could affect case temperatures. Maximum case temperatures are
  • Intel blkdp43tf | Product Specification - Page 57
    31. Intel® Desktop Board DP43TF Environmental Specifications Parameter Specification Temperature Non-Operating Operating -20 °C to +70 °C 0 °C to +55 °C Shock Unpackaged Packaged 50 g trapezoidal waveform Velocity change of 170 inches/second² Half sine 2 millisecond Product weight (pounds
  • Intel blkdp43tf | Product Specification - Page 58
    Intel Desktop Board DP43TF Technical Product Specification 58
  • Intel blkdp43tf | Product Specification - Page 59
    3.1 Introduction The board uses an Intel BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the BIOS Setup program, POST, the PCI auto-configuration utility, and Plug and Play support. The BIOS
  • Intel blkdp43tf | Product Specification - Page 60
    Intel Desktop Board DP43TF Technical Product Specification Table 32 lists the BIOS Setup program menu features. Table 32. BIOS Setup Program Menu Bar Maintenance Main Advanced Security Clears passwords and displays processor information Displays processor and memory configuration Configures
  • Intel blkdp43tf | Product Specification - Page 61
    options by specifying manual configuration in the operating system device drivers NOTE Do not connect is a Desktop Management Interface and processor speed support, an SMBIOS service-level application running on a non-Plug and Play operating system can obtain the SMBIOS information. Additional board
  • Intel blkdp43tf | Product Specification - Page 62
    Intel Desktop Board DP43TF Technical Product Specification 3.5 Legacy USB Support Legacy USB support enables USB devices to be used even when the operating system's USB drivers are not yet available. Legacy USB support is used to access the BIOS Setup program, and to install an operating system that
  • Intel blkdp43tf | Product Specification - Page 63
    an incompatible BIOS. NOTE Review the instructions distributed with the upgrade utility before attempting a BIOS update. For information about BIOS update utilities Refer to http://support.intel.com/support/motherboards/desktop/s b/CS-022312.htm. 3.6.1 Language Support The BIOS Setup program
  • Intel blkdp43tf | Product Specification - Page 64
    Intel Desktop Board DP43TF Technical Product Specification 3.6.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel® Integrator Toolkit or Intel® Integrator Assistant that are available from
  • Intel blkdp43tf | Product Specification - Page 65
    second, and the ATAPI CD-ROM third. The fourth device is disabled. 3.8.1 CD-ROM Boot Booting from CD-ROM is supported in compliance to the El Torito bootable CD-ROM format specification. Under the Boot menu in the BIOS Setup program, ATAPI CDROM is listed as a boot device. Boot devices are defined
  • Intel blkdp43tf | Product Specification - Page 66
    Intel Desktop Board DP43TF Technical Product Specification 3.9 Adjusting Boot Speed These factors affect system boot possible to optimize the boot process to the point where the system boots so quickly that the Intel logo screen (or a custom logo splash screen) will not be seen. Monitors and hard
  • Intel blkdp43tf | Product Specification - Page 67
    Overview of BIOS Features 3.10 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup program and for booting the computer, with the following
  • Intel blkdp43tf | Product Specification - Page 68
    Intel Desktop Board DP43TF Technical Product Specification 68
  • Intel blkdp43tf | Product Specification - Page 69
    to Figure 1, page 11 4.2 BIOS Beep Codes Whenever a recoverable error occurs during POST, the BIOS causes the board's speaker to beep an error message describing the problem (see Table 37). Table 37. Beep Codes Type Pattern Memory error Three long beeps Thermal warning Four alternating
  • Intel blkdp43tf | Product Specification - Page 70
    Intel Desktop Board DP43TF Technical Product Specification 4.4 Port 80h POST Codes During the POST, the BIOS 00 - 0F Debug codes: Can be used by any PEIM/driver for debug. 10 - 1F 20 - 2F Host Processors: 1F is an unrecoverable CPU error. Memory/Chipset: 2F is no memory detected or no useful
  • Intel blkdp43tf | Product Specification - Page 71
    POST Codes POST Code Description of POST Operation Host Processor 10 Power-on initialization of the host processor (Boot Strap Processor) 11 Host processor Cache initialization (including APs) 12 Starting Application processor initialization 13 SMM initialization Chipset 21 Initializing
  • Intel blkdp43tf | Product Specification - Page 72
    Intel Desktop Board DP43TF Technical Product Specification Table 40. Port 80h POST Codes (continued) POST a removable media BDS Dy Trying boot selection y (y=0 to 15) PEI Core E0 Started dispatching PEIMs (emitted on first report of EFI_SW_PC_INIT_BEGIN EFI_SW_PEI_PC_HANDOFF_TO_NEXT) E2
  • Intel blkdp43tf | Product Specification - Page 73
    Codes (continued) POST Code Description of POST Operation DXE Drivers E7 Waiting for user input E8 Checking password E9 Entering BIOS EFI boot service ExitBootServices ( ) has been called F9 EFI runtime service SetVirtualAddressMap ( ) has been called FA EFI runtime service ResetSystem
  • Intel blkdp43tf | Product Specification - Page 74
    Intel Desktop Board DP43TF Technical Product Specification Table 41. Typical Port 80h POST Sequence POST Code memory 34 Loading recovery capsule E4 Entered DXE phase 12 Starting application processor initialization 13 SMM initialization 50 Enumerating PCI busses 51 Allocating resourced
  • Intel blkdp43tf | Product Specification - Page 75
    of Conformity statement • Product Ecology statements • Electromagnetic Compatibility (EMC) standards • Product certification markings 5.1.1 Safety Standards The Intel Desktop Board DP43TF complies with the safety standards stated in Table 42 when correctly installed in a compatible host system
  • Intel blkdp43tf | Product Specification - Page 76
    Intel Desktop Board DP43TF Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board DP43TF is in conformity with all applicable essential requirements necessary for
  • Intel blkdp43tf | Product Specification - Page 77
    of this program, including the scope of covered products, available locations, shipping instructions, terms and conditions, etc Intel Product Recycling Program http://www.intel.com/intel/other/ehs/product_ecology Deutsch Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das
  • Intel blkdp43tf | Product Specification - Page 78
    Intel Desktop Board DP43TF Technical Product Specification Español Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel devuelvan los productos usados en los
  • Intel blkdp43tf | Product Specification - Page 79
    ı, kayıtlar ve şartlar v.s dahil bütün ayrıntılarını ögrenmek için lütfen http://www.intel.com/intel/other/ehs/product_ecology Web sayfasına gidin. 5.1.3.3 Lead Free Intel Desktop Board This Intel Desktop Board is a European Union Restriction of Hazardous Substances (EU RoHS Directive 2002/95/EC
  • Intel blkdp43tf | Product Specification - Page 80
    Intel Desktop Board DP43TF Technical Product Specification Table 43. Lead-Free Board Markings Description Lead-Free 2nd Level Interconnect: This symbol is used to identify electrical and electronic assemblies and components in which the lead (Pb) concentration level in the desktop board substrate
  • Intel blkdp43tf | Product Specification - Page 81
    Regulatory Compliance and Battery Disposal Information 5.1.4 EMC Regulations The Intel Desktop Board DP43TF complies with the EMC regulations stated in Table 44 when correctly installed in , it may cause radio interference. Install and use the equipment according to the instruction manual. 81
  • Intel blkdp43tf | Product Specification - Page 82
    Intel Desktop Board DP43TF Technical Product Specification Korean Class B statement translation: this is household equipment number: CPU-DP43TF (B) Taiwan BSMI (Bureau of Standards, Metrology and Inspections) mark. Includes adjacent Intel company number, D33025. Printed wiring board manufacturer's
  • Intel blkdp43tf | Product Specification - Page 83
    Regulatory Compliance and Battery Disposal Information 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations.
  • Intel blkdp43tf | Product Specification - Page 84
    Intel Desktop Board DP43TF Technical Product Specification PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por
  • Intel blkdp43tf | Product Specification - Page 85
    Regulatory Compliance and Battery Disposal Information AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo
  • Intel blkdp43tf | Product Specification - Page 86
    Intel Desktop Board DP43TF Technical Product Specification 86
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
July 2008
Order Number:
E41955-001US
The Intel
®
Desktop Board DP43TF may contain design defects or errors known as errata that may cause the product to deviate from published specifications.
Current
characterized errata are documented in the Intel Desktop Board DP43TF Specification Update.
Intel® Desktop Board
DP43TF
Technical Product Specification