Intermec CK3R CK3 Series Battery (AB17/AB18) Instructions

AB

17

| AB

18

CK3 Series Battery Instructions

You need to fully charge the battery before using it in your CK3 Series

(CK3a, CK3a1, CK3n, CK3n1, CK3c, CK3c1, 1007CP01, 1007CP02,

1007CP02L, and 1007CP02-NI) mobile computer. You can charge

batteries after a partial discharge without affecting the original battery

capacity. A fully discharged battery charges in approximately 4 (AB17)

to 6 (AB18) hours.

You can charge the battery with these Intermec-approved battery

charging accessories:

y

Desktop Base (Model 1002UU01) (with 1002UC02)

y

Dual Base (Model 1002UU02, 1002UU03) (with 1002UC02)

y

Quad Base (Model 1002UU04, 1002UU05) (with 1002UC02)

y

CK3 Series Quad Charger (Model AC20)

y

CK3 Series Single Dock (Model AD20)

You can also charge an AB17 or AB18 battery installed in a CK3 Series

mobile computer. For more information about charging accessories,

see your computer user manual.

Use only these charging accessories. For more information, see the

charging accessory instructions available in the accessory shipping box

or from the Intermec website at

www.intermec.com

.

Specifications

Design and specifications are subject to change without notice.

Physical Specifications

Product:

Intermec Li-ion battery (Model AB17 or AB18)

Dimensions:

9.1 x 4.2 x 2.2 cm (3.6 x 1.7 x 0.9 in) (AB17)

9.1 x 4.2 x 2.5 cm (3.6 x 1.7 x 1.0 in) (AB18)

Weight:

67.7 g (2.4 oz) (AB17)

123.4 g (4.3 oz) (AB18)

Capacity and Output Specifications

Maximum output:

x

4.2 V

Nominal output:

x

3.7 V

Capacity:

2000 mAH (AB17), 5100 mAH (AB18)

Temperature and Humidity Specifications

Operating temperature:

-20 °C to 60 °C (-4 °F to 140 °F)

Charging temperature:

0 °C to 45 °C (32 °F to 113 °F)

Storage temperature:

For up to 1 month

-20 °C to 60 °C (-4 °F to 140 °F)

For up to 1 year

-20 °C to 25 °C (-4 °F to 77 °F)

Relative humidity:

5% to 95% non-condensing

Important Recommendations

y

Charge the battery immediately before use.

y

Do not short circuit the battery, and keep it away from metallic

items.

y

Do not drop the battery or apply mechanical shocks or pressure

to it.

y

Discarded batteries may create a safety hazard. Before disposal,

cover the battery connector with electrical insulating tape.

y

Do not disassemble or dispose of in fire.

y

Do not store the battery at temperatures above 60 °C (140 °F),

such as inside a car on a hot day or in direct sunlight, as this may

damage the battery.

y

Do not immerse the battery in water or get the battery wet.

y

Do not solder directly to the battery contacts.

y

Use the Intermec battery AB17 or AB18 only with a CK3. Use of

this battery in other devices could result in damage to the device

or battery.

y

For maximum battery life, the temperature range for charging

batteries is 0 °C to 45 °C (32 °F to 113 °F).

Worldwide Headquarters

6001 36th Avenue West

Everett, Washington 98203

U.S.A.

tel

425.348.2600

fax 425.355.9551

www.intermec.com

© 2012 Intermec Technologies

Corporation. All rights reserved.

CK3 Series Battery (AB17/AB18) Instructions

*943-175-004*

P/N 943-175-004

When the battery reaches the end of its useful life, the spent

battery should be disposed of by a qualified recycler or

hazardous materials handler. Do not mix this battery with

the solid waste stream. Contact your Intermec Technologies

Service Center for recycling or disposal information.

Li-ion

Note: In the U.S.A., the EPA does not consider spent Li-ion batteries

as hazardous waste.

廢電池請回收

Proper Disposal of Waste Batteries

Some of the substances necessary for the proper functioning

of batteries are considered harmful to the environment and to

human health. It is therefore important that those substances be

kept out of the environment.

You play an important role in the protection of the environment:

1.

Keep all waste batteries out of unsorted trash.

2.

Dispose of all waste batteries in separate collection for

treatment and recycling.

Please contact Intermec for the collection option(s) available in

your location.

Marking of the battery:

3.

The wheeled-bin symbol indicates the requirement for

separate collection of the battery.

4.

Two letters shown underneath the wheeled bin indicate the

presence of a certain substance:

a.

Hg means Mercury is present

b.

Cd means Cadmium is present

c.

Pb means Lead is present

5.

The Moebius loop (chasing arrows) indicates that the battery

is recyclable.

Intermec CK3R CK3 Series Battery (AB17/AB18) Instructions

Intermec CK3R Manual

Intermec CK3R manual content summary: