Intermec CN51 CN51 Mobile Computer User Manual (for Windows Embedded Handheld
Intermec CN51 Manual
View all Intermec CN51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Intermec CN51 manual content summary:
- Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 1
CN51 Mobile Computer For Windows Embedded Handheld 6.5 User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 2
copies and that both that copyright notice and this permission notice appear in supporting documentation. Dr John Maddock makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty. ii CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 3
on the Numeric Keypad 15 About the Power Button 15 About the Screen Backlight 17 Configure the Screen Backlight Brightness 17 About the Audio Features 17 Adjust the Speaker Volume 17 About the Scanner 18 Scan Bar Codes 18 Connect a Bluetooth Scanner 20 CN51 Mobile Computer User Manual iii - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 4
MicroSD Card 21 How to Transfer Files 23 Set Up the Computer as a Mass Storage Device 23 CN51 Accessories 24 2 About the User Interface and Intermec Applications 27 About the User Interface of Carrier Settings 45 Switch Carriers Using Intermec Settings 45 iv CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 5
microSD Card 50 Computer 78 Start Intermec Settings 79 About the Structure of Intermec Settings 79 How to Navigate in Intermec Settings 84 Enable Intermec Settings Password 85 Restore Default Settings 85 Configure the Computer Remotely with SmartSystems 86 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 6
Applications 107 How To Package Your Application 107 Install Applications with SmartSystems 108 Install Applications with Microsoft Synchronization Software 108 Install Applications with a microSD Card 109 How to Launch Applications Automatically 109 vi CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 7
microSD Card 111 8 Troubleshoot and Maintain the Computer 113 About the Intermec Dashboard 114 About Troubleshooting the Computer 115 Wi-Fi Connection Problems 115 Check Wi-Fi Network Status 116 802.1x Security Problems 117 Troubleshoot the Scanner with Scan Diagnostics 119 Problems Reading - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 8
Bluetooth Settings 154 WWAN Settings 154 Device Settings 154 GPS Bread Crumbing State 157 Core Messaging Service Settings 157 SmartSystems Information Settings 157 Device Monitor Settings 158 Virtual Wedge Settings 159 Location Services Settings 159 viii CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 9
handling optical parts. instructions for handling a particular condition or set of circumstances. Global Services and Support Warranty Information To understand the warranty for your Intermec product, visit the Intermec website at www.intermec.com and click Support CN51 Mobile Computer User Manual ix - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 10
network and general networking terms, such as IP address. Related Documents The Intermec website at www.intermec.com contains our documents (as .pdf files) that you can download for free. 1 Visit the Intermec website at www.intermec.com. 2 Click the Products tab. x CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 11
Manuals tab. If your product does not have its own product page, click Support > Manuals. Use the Product Category, the Product Family, and Product menus to find your documentation. Patent Information For patent information, refer to www.honeywellaidc.com/patents. CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 12
Before You Begin xii CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 13
1 About the Computer Features This chapter introduces the CN51 Mobile Computer with Windows® Embedded Handheld 6.5 operating system. Use this chapter to learn about basic computer features and functions, as well as the available accessories for it. 1 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 14
scanning bar codes and capturing signatures • HTML5 support • Integrated GPS receiver (with WAN radio option) • Accelerometer that can automatically sense the angle of the computer and rotate the display between portrait and landscape • 5-megapixel color camera 2 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 15
CVUUPO /PUJGJDBUJPO-&% 1PXFSCVUUPO Chapter 1 - About the Computer Features 4QFBLFS 3FBEZUP8PSL-&% (PPESFBE-&% CN51 Front View #BUUFSZ SFMFBTFUBC 7PMVNFCVUUPOT #BUUFSZTUBUVT-&% .JDSPQIPOF $BNFSB *NBHFS CN51 Back View CN51 Mobile Computer User Manual 3FDPSE CVUUPO 4JEFTDBO CVUUPO 3 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 16
charges in approximately 6 hours. • Insert the battery into a quad battery charger, a single dock, or a multidock, or attach external power to the CN51 with the battery installed. The battery is fully charged when the battery status LED shows a steady green. 4 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 17
1 - About the Computer Features Use these Intermec accessories to charge the CN51 batteries: • Quad Battery Charger (Model AC21) • Charge-Only Multidock (Model AD23) • Ethernet Multidock (Model AD24) • Single Dock (Model AD27) • Vehicle Power Adapter (Model AE36) • AC Power Adapter (Model AE37 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 18
Icon Status Battery is fully charged. Battery has medium charge. Battery is low. You need to change the battery soon. Battery is critically low. You need to change the battery now or place the computer in a charging dock immediately. Battery is charging. 6 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 19
the battery temperature returns to the acceptable range of 0 °C to 45 °C (32 °F to 113 °F). No battery is installed. The CN51 does not turn on if no battery is installed.The battery is not critically low, and the CN51 is not connected to an external power source. CN51 Mobile Computer User Manual 7 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 20
, which runs the battery down over time even when the computer is not in use. • If you store the battery for several months, recharge the battery to keep it at peak performance. Store the battery outside the computer. Store the battery in a charger. 8 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 21
LED Descriptions Callout 1 2 LED Notification Good Read Color Description Orange Green Blinking red Windows Mobile 6.5 notification. Good read of a bar code. Bad read of a bar code. Blinking The data collection engine is green processing or starting up. CN51 Mobile Computer User Manual 9 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 22
range. If it is outside the charging temperature range, charging will resume when the battery temperature returns to the acceptable range of 0 °C to 45 °C (32 °F to 113 °F). Off The computer is not on external power and the battery is operating normally. 10 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 23
Chapter 1 - About the Computer Features Location of Orange and Green Key LEDs Orange and Green Key Status LEDs Callout 4 LED Orange/green key , the Green shift plane is enabled. You can type characters or access functions printed in green on the keypad. CN51 Mobile Computer User Manual 11 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 24
Chapter 1 - About the Computer Features About the Keypad The CN51 comes with either a numeric keypad or a QWERTY keypad: • The numeric keypad is also lets you enter special characters by pressing color-coded key sequences. CN51 Numeric Keypad CN51 QWERTY Keypad 12 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 25
understand how to use the color-coded keys and key sequences, you can access all of the additional features printed on the keypad overlay. Press the Green or Orange key twice to lock it. When the key is locked, the LED turns on. Press the key once to unlock it. CN51 Mobile Computer User Manual 13 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 26
1 - About the Computer Features The default setting for the change the setting for the Green/Orange keys, go to Start > Settings > System > Intermec Settings > Device Settings > Keypad. How to Use the Color-Coded Keys You Want To Shift key to disable Caps Lock. 14 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 27
action (the button outlined in bold) occurs after the timeout. Hibernate does not appear as an option if the computer is connected to external power. Use the next table to understand the Intermec Power Options and what settings are available for your computer. CN51 Mobile Computer User Manual 15 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 28
Power Options screen is customizable. You can use Intermec Settings to determine which options are available to end users, the timeout until the default choice is selected, the default action if no option is selected, or to disable the Power Options Screen. 16 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 29
sounds you hear when you tap the screen or scan bar codes with a scanner. 1 Tap the Title bar at the top of the screen. 2 Tap the Volume icon . 3 Use your stylus to adjust the volume slider, or use the side volume buttons to change the volume setting. 4 Tap OK. CN51 Mobile Computer User Manual 17 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 30
only the bar code symbologies that you need. 1 Point the scanner window at the bar code and hold the computer steady a few inches from the bar code. 2 Press the Scan button or pull the scan handle trigger. The illumination beam, laser pointer, or frame appear. 18 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 31
middle of the bar code. Make sure that the illumination beam covers the bar code you are trying to decode. When the scanner successfully reads a bar code label, you hear a high beep, and the Good Read LED turns on briefly. 3 Release the Scan button or trigger. CN51 Mobile Computer User Manual 19 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 32
System > Wireless Scanning. 2 Tap Add Device. 3 Select Quick Connect, Search, or Manual. Follow the instructions on the screen to add a Bluetooth scanner. After you add a Bluetooth scanner, you can configure scanner settings and parameters in Intermec Settings. 20 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 33
door in the battery compartment. 2 Slide the SIM card holder to the left to unlatch it, and lift the holder to open it and access the microSD card holder. 3 Slide the microSD card holder towards the top of the CN51 to unlatch it, and lift the holder to open it. CN51 Mobile Computer User Manual 21 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 34
the microSD card in the holder with the contacts facing away from the holder. 5 Close and latch the microSD card holder. 6 Close and latch the SIM card holder, and close the card access door until it snaps shut. 7 Install the battery and turn on the computer. 22 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 35
accessory. 3 On the mobile computer, tap Start > Settings > System > Intermec Settings. 4 Tap Device Settings > USB. 5 From the USB function driver menu, select Mass storage - Flash File Store and tap OK. 6 Copy files to and from your desktop PC to the mobile computer. CN51 Mobile Computer User - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 36
snaps on to the CN51 and provides magnetic stripe reading capabilities. CN51 Quad Charger (Model AC21) Use the quad battery charger to charge up to four batteries. CN51 RS-232 Adapter This accessory snaps on to the CN51 and provides serial connectivity. 24 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 37
or broken stylus. CN51 Vehicle Docks (AV6, AV9) Use the vehicle docks to hold and charge the CN51 while using it on a vehicle. CN51 Vehicle Power Adapter (Model AE36) Use the vehicle power adapter to charge the battery installed in the CN51 from your vehicle. CN51 Mobile Computer User Manual 25 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 38
Chapter 1 - About the Computer Features 26 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 39
2 About the User Interface and Intermec Applications Use this chapter to learn about the Windows Embedded Handheld user interface and how to interact with the screen. You can also use this chapter to learn about the Intermec applications on your computer, as well as additional applications you can - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 40
provides a touch-friendly and easy to navigate user interface. About the Home Screen When you turn on your mobile computer, the Home screen is the first screen that appears after language provisioning is complete. Windows Embedded Handheld 6.5 Home Screen 28 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 41
User Interface and Intermec Applications Home Screen Navigation Bars Callout 1 2 3 Navigation Bar Description Title bar Use the Title bar icons to view the current status of information such as signal strength and battery power by making parts of the CN51 Mobile Computer User Manual 29 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 42
2 - About the User Interface and Intermec Applications About Screen Gestures The Windows Embedded Handheld 6.5 interface supports the use of gestures with the finger or stylus to move around the . Microphone is on. Internet call is in progress. Bluetooth is on. 30 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 43
and no networks are detected. A network connection is active. A network connection is inactive. The volume is on. The volume is off. The battery has full charge. The battery has a high charge. The battery has a medium charge. The battery has a low charge. CN51 Mobile Computer User Manual 31 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 44
additional applications from the Intermec website to help you use all of the features of your computer. Intermec Applications on the Computer Intermec applications help you configure, troubleshoot, and connect your computer to other devices and networks. 32 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 45
to turn the phone and radios (Wi-Fi, Bluetooth) on and off and configure settings for each radio. Use the Wireless Printing application to connect to a Bluetooth printer. Wireless Scanning Use the Wireless Scanning application to connect to a Bluetooth scanner. CN51 Mobile Computer User Manual 33 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 46
computer that you can run on iOS and Android devices. Intermec HTML5 Browser also lets you run applications while the computer is connected to the web or while it is offline. For more information on the HTML5 Browser, see the Intermec HTML5 Browser User Guide. 34 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 47
-site or remotely to maximize IT resources and lower the total cost of ownership for Intermec data collection equipment. SmartSystems Foundation can be downloaded at no charge from the Intermec website. For more information, visit www.intermec.com/SmartSystems. CN51 Mobile Computer User Manual 35 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 48
Chapter 2 - About the User Interface and Intermec Applications 36 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 49
3 Use the Phone You can use the phone feature to make and receive telephone calls, as well as transmit data through cellular wide-area networks (WANs). 37 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 50
has the Flexible Network Radio or the UMTS/HSPA+WAN radio. You use a SIM card to activate the UMTS phone on the CN51. You can purchase the SIM card from your network provider. 1 Press to turn off the CN51. 2 Disconnect the handstrap from the top of the computer. 38 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 51
Chapter 3 - Use the Phone 3 Push forward on the battery release tab until the battery releases, and then lift the battery away from the computer. 4 Open the card access door and slide the SIM card holder to the left to open it. CN51 Mobile Computer User Manual 39 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 52
Chapter 3 - Use the Phone 5 Place the SIM card in the holder. 6 Close the SIM card holder and slide it to the right to secure it, and then close the card access door. 7 Insert the battery and press down until it clicks in place. 8 Reconnect the handstrap. 40 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 53
appears and the phone is ready to use. If you plan to add additional carriers, you need to enable automatic configuration of carrier settings in Intermec Settings. Note: Data connections are to the public domain on your network. CN51 Mobile Computer User Manual 41 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 54
is ready to use. If your carrier is Verizon, tap Start > Phone, enter *228 on the phone keypad, and press Talk. After a short wait, a message appears, confirming either success or failure of the activation. After successful activation, the phone is ready to use. 42 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 55
the SIM card is missing from your UMTS phone or if you do not have a valid CDMA account. In either case, the phone shows that you have no service. However, if you dial certain emergency numbers (such as 112, 911, 000, 08, 118, 119, or 999) the call will go through. CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 56
a Keypad sound from the list. • Enter the name of the sound you want to use for voicemail notifications in the Voicemail field. 3 Tap OK. 44 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 57
Use Intermec Settings to quickly change your WAN radio network carrier. Note: Your computer must have the software-defined radio to switch carriers using this method. 1 Tap Start > Settings > System > Intermec Settings > Communications > WWAN > Carrier Choice. CN51 Mobile Computer User Manual 45 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 58
Chapter 3 - Use the Phone 2 Select a Carrier and tap OK. If the update is successful, your new carrier appears in the WWAN settings list. If the update is unsuccessful, the carrier does not change. 3 Tap Ok to exit Intermec Settings. 46 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 59
4 Use the Camera Learn to use the color camera to take pictures and record videos, read bar codes, perform document capture, or perform signature capture. 47 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 60
for taking pictures and videos. Note: You must use Intermec Settings to configure camera settings for reading bar codes, document imaging, or signature capture. You can send pictures and videos to others or save an image as the background on the Home screen. 48 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 61
stop recording and save the video. If you choose to save your videos to main memory, the videos are saved to permanent storage on the computer. CN51 Mobile Computer User Manual 49 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 62
My Documents/My Pictures folder on the computer. You can save your pictures and video to a microSD card to easily transport them to another device. 1 Install a microSD card in the computer. 2 Tap Start > Pictures & the camera, you can configure these settings. 50 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 63
to infinity. • Continuous: Focuses when movement is detected in the scene. • Manual: You must enter a focus distance. The distance at which the camera focuses. image. Manual settings are from -4 (very dark) to +4 (very light) in increments of 1. Default is 0. CN51 Mobile Computer User Manual 51 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 64
from -4 (very soft) to +4 (very sharp) in increments of 1. Default is 0. Color saturation level. Manual settings are from -4 (black and white) to +4 (maximum color) in increments of 1. Default is 0. camera flash when you take a picture: automatic, on, or off. 52 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 65
and Videos Use the Pictures & Videos application to configure the camera. Note: You must use Intermec Settings to configure camera settings for reading bar codes, document imaging, or signature capture. 1 Tap Start > Pictures & Videos. 2 Tap the Camera icon. CN51 Mobile Computer User Manual 53 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 66
when the camera is operating. Certain settings are only available when taking either Video or Still pictures, but not for both. Note: You must use Intermec Settings to configure camera settings for reading bar codes, document imaging, or signature capture. 54 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 67
4.0x • 6.0x • 8.0x • Manual Selects a Scene for the • Auto camera. Scenes are sets of • Manual preset values for the camera, optimized for different environments. • Van Interior • Office Store • Warehouse • Daylight • Night • Cloudy • Check • DocCap CN51 Mobile Computer User Manual 55 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 68
•0 • Manual • +100 • +50 •0 • -50 • -100 • Manual • +100 • +50 •0 • -50 • -100 • Manual • +100 • +50 •0 • -50 • -100 • Manual • None • Negative • Solarize • Sepia • Gray • Natural • Vivid • Color Swap • Black Board • White Board • Aqua • Posterize • Black White 56 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 69
in .5 increments. • Auto • 100 • 200 • 400 • 800 Exposure - Auto Exposure Auto Exposure: • Auto • Night • Spot Light • Sport • Snow • Beach • Aperture • Small Aperture Exposure - Manual Exposure Manual Exposure: • 1/200 • 1/100 • 1/50 • 1/33 • 1/20 • 1/8 CN51 Mobile Computer User Manual 57 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 70
bottom of the screen. Image filename prefix Default is img. Location for saved still picture files • Main Memory (default) • Flash File Store • RAM Drive 58 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 71
the Camera Camera Settings (Still) (Continued) Setting Description Choices Flicker To limit possible problems with light/dark exposures when recording video, select the value matching the fluorescent light Timer mode hold duration Default is 5. (in seconds) CN51 Mobile Computer User Manual 59 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 72
> Options and enter a new value in the Hold record field. Sets the amount of digital zoom. • 1.0x • 1.5x • 2.0x • 2.5x • 3.0x • 3.5x • 4.0x • 6.0x • 8.0x • Manual 60 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 73
Store • Warehouse • Daylight • Night • Cloudy • Check • DocCap Brightness • +100 • +50 •0 • Manual Contrast • +100 • +50 •0 • -50 • -100 • Manual Sharpness • +100 • +50 •0 • -50 • -100 • Manual Saturation • +100 • +50 •0 • -50 • -100 • Manual CN51 Mobile Computer User Manual 61 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 74
• Posterize • Black White • Auto • DayLight • Cloudy • Shade • Tungsten • Fluorescent • Incandescent • Horizon • Twilight • Warm Fluorescent • Sunset From +2.5 to -2.5 in .5 increments. • Auto • 100 • 200 • 400 • 800 62 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 75
• Auto • Night • Spot Light • Sport • Snow • Beach • Aperture • Small Aperture Exposure - Manual Exposure Manual Exposure: • 1/200 • 1/100 • 1/50 • 1/33 • 1/20 • 1/8 Exposure - Metering Metering: bottom of the screen. Video filename prefix Default is vid. CN51 Mobile Computer User Manual 63 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 76
video noise filtering. Check the box to enable video noise filtering. • 15 fps • 30 fps (default) • Custom. Adjust the frame rate with the slider. 64 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 77
camera is disabled by default. Note: You can also enable reading bar codes by setting parameters in Intermec Settings. 1 Tap Start > ProfileSettings. 2 Tap Camera. 3 In the Camera menu, tap Enable bar code scan or Disable bar code scan as necessary. 4 Tap OK. CN51 Mobile Computer User Manual 65 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 78
If the computer does not read the bar code right away, release the Scan button and try again. You may need to move the computer closer to must use the Intermec Settings application to configure the camera. From the main screen of Intermec Settings, select Data 66 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 79
cm to infinity) Manual focus value When Focus Mode is set to Manual, this value sets the manual focus level. Default is 65. Set to 0 for infinity, or 255 for closeups. Lighting Settings and Descriptions Setting Torch Description Choices • Off • On • Auto CN51 Mobile Computer User Manual 67 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 80
to enable document capture. The computer uses the current document capture settings to apply perspective correction (and other postprocessing features if specified). • You can configure individual parameters in Intermec Settings to enable document capture. 68 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 81
You can also enable document capture by setting parameters in Intermec Settings. 1 Tap Start > ProfileSettings. 2 Tap Camera. document capture. To disable document capture, tap Disable bar code scan. 4 Tap OK. Perform Document Capture with the Camera After you CN51 Mobile Computer User Manual 69 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 82
for document imaging, you must use the Intermec Settings application to configure the camera. From the main screen of Intermec Settings, select Data Collection > Camera > Camera (default) or disable. • None (default) • Monochrome • Enhanced monochrome (TIFF) 70 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 83
set amount. • 180 degrees • 270 degrees Image lighting correction Default is disabled. Document file Name for the Default is doc_$(num). name document image file. CN51 Mobile Computer User Manual 71 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 84
Chapter 4 - Use the Camera 72 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 85
5 Use GPS The computer comes equipped with an integrated Global Positioning System (GPS) receiver if your computer has phone capability (WWAN radio). The GPS receiver can deliver standards-based National Marine Electronics Association (NMEA) data strings to GPS applications. 73 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 86
and parse NMEA syntax. Use the GPSID Installed on the Computer To use the GPSID installed on your mobile computer, you need to configure the GPSID settings. 1 Tap Start > Settings > System > External GPS. The GPS Settings screen appears with Programs selected. 74 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 87
integrated GPS module has three operating modes: • Standalone • MS Assisted (Mobile Station Assisted) • gpsOneXTRA™ (UMTS computers only) In Standalone mode, the GPS module relies solely on GPS satellites to determine position. Note: The CN51 also supports GLONASS. CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 88
Standalone (1), MS assisted (2), or Enable gpsOneXTRA (check box). Note: GLONASS reception is enabled by default. Intermec recommends that you keep GLONASS enabled for better accuracy. To disable GLONASS, make sure that Enable Glonass is not selected. 4 Tap OK. 76 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 89
6 Configure the Computer Use this chapter to learn about the available methods for configuring your computer and how to use Intermec Settings. You can also use this chapter to learn how to configure network communications and wireless security. 77 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 90
mobile computers as well as other SmartSystems-enabled Intermec devices and peripherals. • Using a third-party device management product that supports the computer and Intermec Intermec Settings to prevent users from making changes to the configuration settings. 78 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 91
want to configure. Each table contains the parameters for one of the Intermec Settings Main Menu options. Most parameters are saved as soon as you tap OK. Some settings, such as Security Choice, require you to reboot the computer for the changes to take effect. CN51 Mobile Computer User Manual 79 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 92
scanner settings • Imager settings • Decode security • Enable camera port • Symbologies • Symbology Options • Scanner Settings • Camera Settings • Decode Security • Enable Magstripe Reader • Magstripe Reader Settings Parameters You Can Configure Device Name 80 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 93
and Keypad Settings Date and Time Settings • Internal Scanner • Bluetooth Scanner (Read-only) IDL runtime file versions (ITC50, ITCScan) • Button Remapping • Green/Orange keys lock option • Power Button • Battery Power • External Power • Device Off Sensor CN51 Mobile Computer User Manual 81 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 94
settings that appear in the menu are dependent on the printer that is paired with the device. The printer needs to be using the Wireless Printing application. GPS Menu GPS Options Bread Crumbing Parameters You Can Configure Enable or disable bread crumbing. 82 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 95
Chapter 6 - Configure the Computer Core Messaging Service Menu Core Messaging Service Options Parameters You Can Configure Server IP Associated Server Location • Set Data Refresh Periods • Directory • Screen Captures Allowed Read-only • Enable Wipe • Interval CN51 Mobile Computer User Manual 83 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 96
next level. Tap the menu item to access these screens. • Use the up and down arrow keys to move up and down the menu. 84 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 97
items are not affected. 1 Start Intermec Settings. 2 Restore the default settings: • To restore all default settings, tap Menu > Restore all Defaults. • To restore default settings for one menu item, navigate to the menu and tap Menu > Restore Menu Defaults. CN51 Mobile Computer User Manual 85 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 98
Network Communications You can use the mobile computer in your wireless or wired data collection network. You can connect your computer using: • 802.11 radio communications. • Ethernet communications. • Bluetooth communications. • USB and serial communications. 86 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 99
. By default, the radio is turned off. The Bluetooth radio maintains its current state through a warm or cold boot and maintains virtual COM ports. If you clean boot the computer, you must recreate pairings to devices. System bar icons indicate Bluetooth status. CN51 Mobile Computer User Manual 87 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 100
devices. By default the radio is turned off. 1 Tap Start > Settings > Bluetooth > Mode tab. 2 Tap Turn on Bluetooth. 3 (Optional) If you want this computer to be visible to other Bluetooth devices, tap Make this device visible to other devices. 4 Tap OK. 88 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 101
System > Wireless Scanning. 2 Tap Add Device. 3 Select Quick Connect, Search, or Manual. Follow the instructions on the screen to add a Bluetooth scanner. After you add a Bluetooth scanner, you can configure scanner settings and parameters in Intermec Settings. CN51 Mobile Computer User Manual 89 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 102
the computer. For help, see the Bluetooth Resource Kit, which is part of the Intermec Developer Library (IDL), available from the Intermec website at www.intermec.com/idl. • select the current Bluetooth printer on the computer. For help, see the next procedure. 90 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 103
> Settings > System > Wireless Printing. 2 Tap Search to find a printer, or tap Manual to enter a device address. Follow the onscreen instructions to select the current Bluetooth printer. 3 (Optional) Tap Print Test Page. The printer prints out a test page. CN51 Mobile Computer User Manual 91 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 104
USB Communications You can use these accessories to transmit data to and receive data from another device through serial or USB communications: • AV10 vehicle dock • AA21 RS-232 adapter • AD27 single dock • Desktop USB adapter • USB snap-on adapter • RS-232 DEX adapter 92 CN51 Mobile Computer User - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 105
, you need to enable the radio, set the date, and set the SSID on your computer. To use 802.1x security, you need to load a root certificate on your computer. To use transport layer security (TLS) with 802.1x security, you also need to load a user certificate. CN51 Mobile Computer User Manual 93 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 106
1x security, you need a unique client certificate on the computer and a trusted root certificate authority (CA) certificate. 1 Start Intermec Settings. 2 Select Communications > 802.11 Radio > d If necessary, enter the Password of pfx. e Tap Import Certificate. 94 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 107
support for LEAP and TTLS, and configuration for up to four profiles. Funk security is the default security setting on the computer. • Choose Microsoft security if you primarily use the computer to connect Steps 3 through 5 for each profile you want to define. CN51 Mobile Computer User Manual 95 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 108
user and root certificate. On your computer, you need to enable the radio and set the date. 1 Start Intermec User Name and User Password. 8 If you selected TLS, enter a User Name and Subject Name. 9 For Validate Server Certificate, select Yes. 10 Tap OK. 96 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 109
load a user and root certificate. Intermec recommends that you use WPA2-802.1x instead of 802.1x-WEP if possible. 1 Start Intermec Settings. 2 Select Communications > 802.11 Radio > Funk Security. 3 Select a Funk security profile to configure. 4 Enter the SSID. CN51 Mobile Computer User Manual 97 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 110
set static WEP security with Funk security, you need to enable the radio on your computer and set the date. Intermec recommends that you use WPA2-PSK instead of WEP if possible. 1 Start Intermec Settings. 2 Select Communications > 802.11 Radio > Funk Security. 98 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 111
, you can set no security with Funk security. 1 Start Intermec Settings. 2 Select Communications > 802.11 Radio > Funk Security. 3 Select the active Funk security profile. 4 Enter the SSID. 5 For Association, select Open. 6 For Encryption, select WEP. 7 Tap OK. CN51 Mobile Computer User Manual 99 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 112
, select TLS or PEAP. 7 Select Hidden Network. 8 Tap OK. The User Logon dialog box appears. 9 If you selected PEAP: a Enter a User Name, Password, and Domain. b If you want to save the password for future authentication sessions, select Save Password. 100 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 113
protocol, you also need to load a user and root certificate. Intermec recommends that you use WPA2-802.1x instead of 802.1x-WEP if possible. 1 Start Intermec Settings. 2 Select Communications > 802.11 Radio > Microsoft Security. 3 Enter the Network name (SSID). CN51 Mobile Computer User Manual 101 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 114
you need to enable the radio on your computer and set the date. Intermec recommends that you use WPA2-PSK instead of WEP if possible. 1 Start Intermec Settings. 2 Select Communications > 802.11 value: 13 ASCII characters or 0x followed by 13 hexadecimal pairs. 102 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 115
can set no security with Microsoft security. 1 Start Intermec Settings. 2 Select Communications > 802.11 Radio > Microsoft Security. 3 Enter the Network name (SSID). 4 For Network Authentication, select Open. 5 For Data Encryption, select Disabled. 6 Tap OK. CN51 Mobile Computer User Manual 103 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 116
Chapter 6 - Configure the Computer 104 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 117
7 Manage the Computer Use this chapter to learn how to remotely update, configure, and monitor your Intermec computers. You will also find information on installing and developing software applications as well as how to upgrade the system software. 105 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 118
Network When you have multiple mobile computers and peripherals in your network, it is essential to have an easy way to manage updates, configure all the devices, and remotely troubleshoot problems. Intermec provides two free software solutions for managing your computers: • CloneNGo™ is a peer-to - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 119
a clean boot or if you reflash the operating system image. • The optional microSD card. Depending on available disk space, you may want to consider installing your application files on the microSD card. Using a card creates the Storage Card folder on the computer. CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 120
mobile computer through the synchronization software. 2 Copy the .cab files from your development PC to the mobile computer. 3 Reboot or cold boot the computer. 4 After the boot process is finished, browse to the .cab files and tap the files to install them. 108 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 121
software. You can use these methods to update your mobile computer: • You can update individual computers, or multiple computers at the same time, using the SmartSystems console. For help, see the next section. • You can update individual computers using an SD card. CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 122
30 seconds to 15 minutes depending on the update. After the update is complete, the computer boots again. Note: While your mobile computer is offline, SmartSystems displays a red stop symbol in the console until the computer reboots and connects to the system. 110 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 123
7 Press the Power button and choose to Suspend the computer. 8 Remove the microSD card. If you do not remove the microSD card, the update process repeats each time the computer restarts. 9 Replace the battery, turn on the computer, and follow the setup process. CN51 Mobile Computer User Manual 111 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 124
Chapter 7 - Manage the Computer 112 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 125
8 Troubleshoot and Maintain the Computer Use this chapter to find answers to any problems you may encounter while using the computer. You will also find information on routine maintenance. 113 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 126
and battery health, storage space, and internal devices. It also provides system information, such as the operating system, firmware, and hardware configuration. • To access the Intermec Dashboard, press the Intermec Dashboard button. Intermec Dashboard Main Screen 114 CN51 Mobile Computer User - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 127
problem with the to be connected to the network, connection between the access point and but the host computer is not the host computer. Check with network receiving any information from administrator or use your access point the mobile computer. user's manual. CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 128
contact Intermec Product Support, this information can be helpful in troubleshooting wireless network connection issues. , channel, and MAC address for each network. • Tap Scan to refresh the screen. 3 Tap the Supp tab to view computer will ping the host. 116 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 129
power driver Problem Possible Solution The mobile computer Make sure the mobile computer IP address, host indicates that it is IP address, subnet mask, and default router are authenticated, but it does configured for the network. not communicate with the host. CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 130
, the WEP key values access points in a network are not saved. Configure the WEP key values with different SSIDs, and and save your changes. the connection fails. 118 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 131
clean boot the mobile When you clean boot the computer, the date computer and this message and time are not saved. Configure the date and appears, "The server time and save your changes. certificate has expired or your system date is incorrect." Troubleshoot the Scanner with Scan Diagnostics - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 132
LED stays on. If you configure the off. computer for level triggering and the Good Read LED stays on, there may be a problem. Press the Scan button or pull the trigger again without scanning a bar code label. If the LED is still on, contact Intermec. 120 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 133
label. encoded in the bar code label. The input device attached to the Set the Scanner Model command to the computer does not work well or specific attached input device. Enable read bar code labels very quickly. only the bar code symbologies being used. CN51 Mobile Computer User Manual 121 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 134
problem and possible solutions. • visit the Intermec technical knowledge base, Knowledge Central at intermec.custhelp.com. If you still need help, you can call Intermec Product Support at: 1-800-755-5505 Before you call Product Support, have this information ready: 122 CN51 Mobile Computer User - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 135
the alphanumeric keypad. 2 In the Dashboard, scroll down and tap Information. 3 Scroll down until you see the OS Version number. 4 Exit the Device Health Dashboard. CN51 Mobile Computer User Manual 123 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 136
while the CN51 is in Suspend mode, or if you do not change the battery quickly enough when the CN51 is in Hibernate mode. 1 Press and hold the Power button for at least 8 seconds. The computer turns off. 2 Press the Power button again. The computer cold boots. 124 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 137
booting it. If a cold boot does not work, use a clean boot to get the computer up and running for further troubleshooting. 1 Press the Power button for about 2 seconds and then release it. The Intermec Power , and the computer continues the clean boot process. CN51 Mobile Computer User Manual 125 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 138
to the internal components. Note: Intermec recommends that you leave the battery installed when you clean the computer as described. Leaving the battery installed helps prevent fluids from entering the computer through the SIM card and microSD card connectors. 1 Press the Power button to suspend the - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 139
A Specifications 127 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 140
computer. Physical Dimensions Length: Width (at widest part): Depth (at grip): Weight (with battery): Power and Electrical Specifications Operating battery: Backup battery: Electrical rating: Rechargeable lithium-ion battery 95% non-condensing IP54, Category 1 128 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 141
• HanXin • Infomail • Intelligent Mail • Interleaved 2 of 5 • JapanPost* • Matrix 2 of 5 • Maxicode* • Micro PDF417 • MSI • PDF417* • Planet* • Plessey • Postnet* • QR Code* • Standard 2 of 5 • SwedenPost • Telepen • TLC 39 CN51 Mobile Computer User Manual 129 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 142
/1.77 in 22.50 cm/8.86 in 64.00 cm/25.20 in 97.50 cm/38.39 in 41 cm/16.14 in 130 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 143
/5.12 in 20 cm/7.87 in 24.5 cm/9.65 in 45 cm/17.72 in 71.5 cm/28.15 in 29.5 cm/11.61 in CN51 Mobile Computer User Manual 131 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 144
distances are measured in the dark (0 lux). JO %BUB.BUSJYNJMT 1%'NJMT NNNJMT &"/61$ NNNJMT NNNJMT DN EA31 Typical Reading Distances 132 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 145
/5.91 in 21 cm/8.27 in 31 cm/12.20 in 18.2 cm/7.17 in 27.5 cm/10.83 in 40 cm/15.75 in CN51 Mobile Computer User Manual 133 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 146
/2.36 in 24.50 cm/9.65 in 62.50 cm/24.61 in 97.50 cm/38.39 in 40 cm/15.75 in 134 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 147
45 cm/17.72 in 62 cm/24.41 in 31.5 cm/12.4 in 15.5 cm/6.1 in 21.5 cm/8.46 in 31.5 cm/12.4 in CN51 Mobile Computer User Manual 135 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 148
distances are measured in the dark (0 lux). JO %BUB.BUSJYNJMT 1%'NJMT NNNJMT &"/61$ NNNJMT NNNJMT DN EA30 Typical Reading Distances 136 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 149
/13.39 in 16.5 cm/6.5 in 23 cm/9.06 in 34.5 cm/13.58 in 26 cm/10.24 in 37 cm/14.57 in CN51 Mobile Computer User Manual 137 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 150
Appendix A - Specifications 138 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 151
B Default Settings 139 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 152
Settings Data Collection Settings This section lists all default settings for the internal scanner and connected Bluetooth scanners, the camera, and the optional magnetic stripe reader. Note: Camera settings UPC E, EAN 8, EAN 13 Disable Disable Disable Disable 140 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 153
Symbology Option Settings Preamble Postamble Symbology Identifier Multicode Default Value None (Disabled) None (Disabled) Disable Disable Scanner Settings Scanner Setting Trigger Predefined Modes Trigger Mode Aimer Mode CN51 Mobile Computer User Manual Default Value Level Level Typical aimer 141 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 154
Appendix B - Default Settings Scanner Settings (Continued) Scanner Setting Hardware Trigger Trigger Timeout (sec) Aiming Duration (msec) Turn Off After Good Imager Settings - Viewfinder Properties Viewfinder Property Enable viewfinder Default Value Disable 142 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 155
60 Disable 0 Null (none specified) Horizontal and vertical 0 0 0 0 0 0 Imager Settings - Document Imaging Properties Document Imaging Property Enable document imaging Focus check Default Value Disable Disable CN51 Mobile Computer User Manual 143 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 156
Security Settings Decode Security Setting Consecutive data validation Identical consecutive timeout Diff consecutive timeout Center Decoding Center decoding tolerance Default Value 0 1000 0 Disable Disable 144 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 157
Scanner Settings For connected Bluetooth scanners, determines whether the scanner settings are overwritten by the computer scanner settings, or if the computer uses the Bluetooth scanner settings already present. Bluetooth Scanner Settings Bluetooth Scanner CN51 Mobile Computer User Manual 145 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 158
Disable Disable Disable Disable Disable Disable Disable Disable Camera Settings - Symbology Option Settings Symbology Option Settings Preamble Postamble Default Value None (Disabled) None (Disabled) 146 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 159
Identifier Multicode Default Value Disable Disable Camera Settings - Scanner Settings Scanner Setting Trigger Predefined Modes Trigger Mode Aimer Mode Hardware Trigger Focus Properties Viewfinder or Focus Property Enable viewfinder Default Value Disable CN51 Mobile Computer User Manual 147 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 160
Default Value Disable None Disable (no focus check) 0 None None None 0 Disable 0 None Very dark JPEG 60 Disable 0 Null (none specified) Horizontal and vertical 0 0 0 148 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 161
Settings - Image Capture Properties Image Capture Property Output Compression Output compression quality Edge Enhancement Noise Reduction Subsampling Image Rotation Default Value Bitmap 0 None 0 None None CN51 Mobile Computer User Manual 149 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 162
Value 0 1000 0 Disable Disable Magstripe Reader Settings Use these settings to configure the optional magnetic stripe reader accessory. Magstripe Reader Settings Magstripe Reader Settings Enable Magstripe Reader Enable USB MSR auto-detect Default Off Enable 150 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 163
802.11 and WWAN radios, the Ethernet adapter, and power for the Bluetooth radio. 802.11 Power Mode 8021x Association Encryption Pre-Shared Key Transmit Key Key 1 Default Enable Profile_1 Infrastructure 3 INTERMEC Enabled (Fast PSP) None Open None None Key1 None CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 164
MS-Chapv2 None EAP/MDS EAP/MS-Chapv2 EAP/Token Card None No None None On Off On Off Off Optional Off IP Settings IP Settings Current Device IP Address DHCP DHCP Client Identifier IP Address Subnet Mask Default 0.0.0.0 Enable None 192.168.1.106 255.255.255.0 152 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 165
Adapter - IP Settings IP Settings Current Device IP Address DHCP DHCP Client Identifier IP Address Subnet Mask Default Router Primary DNS Secondary DNS Primary WINS Secondary WINS Default 0.0.0.0 Enable None None 255.255.255.0 None None None None None CN51 Mobile Computer User Manual 153 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 166
as the backlight, good read behavior, or power management. Backlight Settings Backlight Settings Display brightness Keypad backlight Default +1 Always off Features Disabled by Policy State Setting Features Disabled by Policy Default No systems disabled 154 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 167
Options Displayed: Hibernate (battery swap), Suspend, Reboot • Screen Timeout (seconds): 5 Suspend • Screen turns off after: Disabled • Device turns off after: 5 minutes • Screen turns off after: Disabled • Device turns off after: Disabled Sleep face down CN51 Mobile Computer User Manual 155 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 168
SD card Enable USB external drive Enable all image capture Default Enable Enable Enable Enable Sound Settings Sound Settings Beeper and voice Headset beeper Good read vibrate intensity Screen taps Key clicks Default Medium Very low 1 strong pulse Off Off 156 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 169
None None INTERMEC 62241 30 seconds SmartSystems Information Settings This section lists the default settings for SmartSystems information. SmartSystems Information Category Identity Administrator Default (read-only) Name, Phone, Email: None specified CN51 Mobile Computer User Manual 157 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 170
On Enable Blue Light (LED) Off for Ready-to-Work Set Rule File Location \SmartSystems\HealthRules.txt Set Data Refresh 90 • Network Device Health (seconds): 45 • Printer Device Health (seconds): 300 Device Monitor Settings Device Interval (in days): 3 158 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 171
Settings Location Services Settings Server Virtual GPS (unavailable unless the server is enabled) Default • Port: 9569 (Unavailable unless the server is enabled) • Enable Server: Disable • Output: Disable • COM Port: 8 (unavailable unless output is enabled) CN51 Mobile Computer User Manual 159 - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 172
Appendix B - Default Settings 160 CN51 Mobile Computer User Manual - Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 173
- Intermec CN51 | CN51 Mobile Computer User Manual (for Windows Embedded Handheld - Page 174
by Honeywell 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2014 Intermec by Honeywell All rights reserved. CN51 Mobile Computer User Manual *935-077-001* P/N 935-077-001
CN
51
Mobile Computer
For Windows Embedded Handheld 6.5
User
Manual