Intermec CV30 Keyboard Mounting Kit Installation Instructions

Keyboard Mounting Kit

Installation Instructions

Use these instructions to install the keyboard and adjustable twin-ball RAM®

mounting assemblies for the fixed or vehicle mount computer. The keyboard

mounting kit contains the following items.

If your mounting situation requires you to use nuts and bolts to install the

RAM mount, you must supply them yourself.

To mount the keyboard to a surface

1

Attach the RAM mount to the underside of the keyboard with four #8-32

x 1/2 inch screws and four #8 fender washers.

Keyboard Mounting Kit Contents

Description

Part Number

Quantity

RAM mount

1

#8-32 x 1/2 inch screws

800-414-003

8

#8 fender washers

803-098-001

4

Keyboard Mounting Kit Installation Instructions

931-017-002

1

Note:

The screws supplied in this kit have preapplied threadlocker.

Lockwashers or threadlocker are

required

on any screws or bolts

you supply to make sure that the RAM mount does not vibrate

loose.

(4 places)

(4 places)