Intermec CV41 CV41 and CV61 Screen Blanking Box Installation Instructions
Intermec CV41 Manual
 |
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Intermec CV41 manual content summary:
- Intermec CV41 | CV41 and CV61 Screen Blanking Box Installation Instructions - Page 1
CV41 | CV61 Screen Blanking Box Installation Instructions - Intermec CV41 | CV41 and CV61 Screen Blanking Box Installation Instructions - Page 2
Contents Screen Blanking Box Installation Instructions 3 Before You Begin 3 What You Need 3 Create a Custom Serial Cable 4 Mount the Screen Blanking Box 5 Wire the Screen Blanking Box 6 Enable Screen Blanking 7 ii CV41 and CV61 Screen Blanking Box Instructions - Intermec CV41 | CV41 and CV61 Screen Blanking Box Installation Instructions - Page 3
done by trained service personnel only. Before You Begin Before you install the screen blanking box, you need to supply power to the vehicle mount computer. To see the power supplies that are supported by your computer, see the computer user guide. For more information, go to www.intermec.com. What - Intermec CV41 | CV41 and CV61 Screen Blanking Box Installation Instructions - Page 4
Create a Custom Serial Cable To use the screen blanking box, you need to supply your own serial cable with a DB9 connector cut Request to send output Clear to send input Pin 8 Pin 7 Sample Custom Serial Cable for Screen Blanking Box 4 CV41 and CV61 Screen Blanking Box Installation Instructions - Intermec CV41 | CV41 and CV61 Screen Blanking Box Installation Instructions - Page 5
Mount the Screen Blanking Box 1 Select a mounting location for the screen blanking box. 2 Secure the screen blanking box to the vehicle using appropriate mounting hardware (not supplied). (x4) CV41 and CV61 Screen Blanking Box Installation Instructions 5 - Intermec CV41 | CV41 and CV61 Screen Blanking Box Installation Instructions - Page 6
the CV41 To wire the screen blanking box 1 Connect the grounding wire. a Connect one end of the grounding wire to the screen blanking box labeled GND. b Connect the other end of the grounding wire to the negative (-) battery terminal. 6 CV41 and CV61 Screen Blanking Box Installation Instructions - Intermec CV41 | CV41 and CV61 Screen Blanking Box Installation Instructions - Page 7
Settings on the vehicle mount computer. To enable screen blanking 1 Browse to Intermec Settings on your computer. For more information, see your computer user manual. 2 Select Device Settings > Screen Blanking on Motion. 3 In Screen Blanking Blanking on Motion, select the COM port the serial - Intermec CV41 | CV41 and CV61 Screen Blanking Box Installation Instructions - Page 8
Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2013 Intermec Technologies Corporation. All rights reserved. CV41 and CV61 Screen Blanking Box Instructions *943-371-002* P/N 943-371-002
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Screen Blanking Box
CV
41
| CV
61
Installation Instructions