Intermec CV41 CV41 UPS Battery and Touch Panel Replacement Instructions
Intermec CV41 Manual
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Intermec CV41 manual content summary:
- Intermec CV41 | CV41 UPS Battery and Touch Panel Replacement Instructions - Page 1
CV41 UPS Battery and Front Panel Replacement Instructions - Intermec CV41 | CV41 UPS Battery and Touch Panel Replacement Instructions - Page 2
CV41 UPS Battery and Front Panel Replacement Instructions 3 Parts and Tools Needed 3 Removing the Front Panel 4 Replacing the UPS Battery 6 Replacing or Installing the Front Panel 7 Securing the Front Panel 8 CV41 UPS Battery and Front Panel Replacement Instructions ii - Intermec CV41 | CV41 UPS Battery and Touch Panel Replacement Instructions - Page 3
fails on the CV41, you can easily replace these two assemblies to minimize the downtime of the computer. Use the following instructions to learn how to replace these two parts. Parts and Tools Needed To order a replacement UPS battery or front panel, contact your local Intermec sales representative - Intermec CV41 | CV41 UPS Battery and Touch Panel Replacement Instructions - Page 4
handle on the CV41. b Lift the bottom of the CV41 up and away from the dock. 2 Place the CV41 into suspend mode by pressing the Power button. 3 Remove the two screws that secure the SIM card access panel to the CV41. SIM card access panel 4 CV41 UPS Battery and Front Panel Replacement Instructions - Intermec CV41 | CV41 UPS Battery and Touch Panel Replacement Instructions - Page 5
to the CV41. Screw (14 places) 7 Carefully remove the front panel from the CV41. 8 If you are replacing the UPS battery, see the next section. If you are replacing the front panel, see "Replacing or Installing the Front Panel" on page 7. CV41 UPS Battery and Front Panel Replacement Instructions 5 - Intermec CV41 | CV41 UPS Battery and Touch Panel Replacement Instructions - Page 6
on any wires. 3 Disconnect the UPS battery by pressing down on the retaining tab (callout A), and gently removing the wiring connector from the CV41. 4 Dispose the new UPS battery to the CV41. 6 Place the UPS battery into the battery well. Make sure that all the wires are inside the battery well and - Intermec CV41 | CV41 UPS Battery and Touch Panel Replacement Instructions - Page 7
Replacing or Installing the Front Panel 1 Position the new or current front panel so that: • the tabs on the back of the front panel line up with the slot on the back panel (callout D should line up with callout A in the following illustration). • the wiring connectors on the front panel are aligned - Intermec CV41 | CV41 UPS Battery and Touch Panel Replacement Instructions - Page 8
shown to a torque value of 6-7 in/lbs. 7 2 4 6 9 10 5 1 3 8 11 13 12 14 2 Reconnect the CV41 to the Quick Mount Smart Dock. 3 Press the Power button on the front of the CV41. 4 If the defroster configuration has changed, you must configure it: a Tap Start > Settings > Control Panel - Intermec CV41 | CV41 UPS Battery and Touch Panel Replacement Instructions - Page 9
- Intermec CV41 | CV41 UPS Battery and Touch Panel Replacement Instructions - Page 10
- Intermec CV41 | CV41 UPS Battery and Touch Panel Replacement Instructions - Page 11
- Intermec CV41 | CV41 UPS Battery and Touch Panel Replacement Instructions - Page 12
Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2012 Intermec Technologies Corporation. All rights reserved. CV41 UPS Battery and Front Panel Replacement Instructions *943-344-002* P/N 943-344-002
UPS Battery and Front Panel
Replacement
CV
41
Instructions