Intermec CV41 CV41 Vehicle Mounting Kit Reference Guide
Intermec CV41 Manual
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Intermec CV41 manual content summary:
- Intermec CV41 | CV41 Vehicle Mounting Kit Reference Guide - Page 1
CV41 Vehicle Mounting Kit Reference Guide - Intermec CV41 | CV41 Vehicle Mounting Kit Reference Guide - Page 2
Information 3 What You Need 4 Mount the Smart Dock to a Vehicle 4 About the 10-60 VDC Power Cable 6 Safety Information 7 What You Need 7 Install the 10-60 VDC Power Cable 8 Connect the AC/DC Power Supply 9 Attach the CV41 to the Smart Dock 10 ii CV41 Vehicle Mounting Kit Reference Guide - Intermec CV41 | CV41 Vehicle Mounting Kit Reference Guide - Page 3
trained service personnel only. Additionally, using hardware that is not approved by Intermec may void the warranty of the computer. This reference guide explains how to: • mount the smart dock to a vehicle. • install the 10-60 VDC power cable. • connect the AC/DC power supply. • attach the CV41 to - Intermec CV41 | CV41 Vehicle Mounting Kit Reference Guide - Page 4
. To mount the smart dock to a vehicle 1 Select a mounting location. 2 Attach a flat base to the smart dock using the four screws and washers provided. (x4) 4 CV41 Vehicle Mounting Kit Reference Guide - Intermec CV41 | CV41 Vehicle Mounting Kit Reference Guide - Page 5
clamp base using the screws and nuts provided to a torque value of 0.95 - 1.10 N/m (17-20 in/lb). For large beams, you may need to supply your own hardware. (x2) CV41 Vehicle Mounting Kit Reference Guide 5 - Intermec CV41 | CV41 Vehicle Mounting Kit Reference Guide - Page 6
power cable is included with your smart dock and allows you to make a powered connection from the smart dock directly to the vehicle. Note: If you are connecting the 6-96 DC/DC converter kit, use the Universal Power Supply Instructions to learn how to connect it to your forklift. 6 CV41 Vehicle - Intermec CV41 | CV41 Vehicle Mounting Kit Reference Guide - Page 7
power cable: • Common hand tools, such as a wrench • Cable clamps or wire-ties • Wire crimping and stripping tools • 10 A maximum time-delay (slow-blow ) high-interrupting rated fuse. For North America, use a UL listed fuse. • Electric drill and drill bits CV41 Vehicle Mounting Kit Reference Guide - Intermec CV41 | CV41 Vehicle Mounting Kit Reference Guide - Page 8
10-60 VDC Power Cable Before you install the power cable, make sure that the CV41 is not attached to the smart dock, and the power switch on the dock is in the off position. To install the 10-60 VDC power cable 1 Connect the negative (black) wire to the negative terminal on the battery. Ignition - Intermec CV41 | CV41 Vehicle Mounting Kit Reference Guide - Page 9
of 15 A overcurrent protection (10 A for 230 V circuits). Note: The AC/DC power supply and cables are intended for use in 25 °C (77 °F) maximum ambient temperature environment. Power supply AC power cord Output cable CV41 AC/DC Power Supply Parts CV41 Vehicle Mounting Kit Reference Guide 9 - Intermec CV41 | CV41 Vehicle Mounting Kit Reference Guide - Page 10
To connect the AC/DC power supply 1 Connect the one end of the AC power cord to the power supply and the other end to wall plug. 2 Connect one end of the output cable to the power supply and the other end to the CV41. 3 Fasten the connector by twisting it clockwise. Attach the CV41 to the Smart Dock - Intermec CV41 | CV41 Vehicle Mounting Kit Reference Guide - Page 11
7 Press the Power button on the smart dock forward (towards the CV41) to turn on the dock. 8 Press the Power button on the CV41 to turn it on. CV41 Vehicle Mounting Kit Reference Guide 11 - Intermec CV41 | CV41 Vehicle Mounting Kit Reference Guide - Page 12
Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2013 Intermec Technologies Corporation. All rights reserved. CV41 Vehicle Mounting Kit Reference Guide *943-349-003* P/N 943-349-003
Vehicle Mounting Kit
CV
41
Reference Guide