Intermec IF61 IF61 Fixed Reader User's Manual

Intermec IF61 Manual

Get Intermec IF61 PDF manuals and user guides View all Intermec IF61 manuals
Add to My Manuals
Save this manual to your list of manuals

Intermec IF61 manual content summary:

  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 1
    IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 2
    WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is , and Vanderbilt University, Copyright (c) 1993-2006, all rights reserved. ii IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 3
    Configuration web service. Added information and procedures for configuring, using, and troubleshooting the 802.11a/b/g radio. Updated screen captures to match the revised web browser interface. Minor revisions made to RFID application development sections. IF61 Fixed Reader User's Manual iii
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 4
    iv IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 5
    xi Web Support xii Telephone Support xii Service Location Support xii Who Should Read This Manual xiii Related Documents xiii Patent Information xiv 1 Getting Started 1 Overview of the IF61 2 Understanding the Network and Power Ports 4 Understanding the LEDs 6 About the Intermec Ready-to
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 6
    and Sybase 59 IF61 JavaScript Support 59 Installing RFID Applications on the IF61 59 Managing Applications 60 About the IF61 Edgeware Applications 61 Upgrading or Installing Edgeware Applications 62 About RFID Services 63 Configuring BRI Settings 64 vi IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 7
    77 4 Managing, Troubleshooting, and Upgrading the IF61 79 Managing the IF61 80 Using the Device Configuration Web Service 80 Using Simple Network Management Protocol (SNMP 82 Using SmartSystems Foundation 84 Configuring the IF61 With Intermec Settings 86 IF61 Fixed Reader User's Manual vii
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 8
    the IF61 to the Default Configuration 98 Rebooting the IF61 100 Managing USB Devices 101 Troubleshooting the IF61 102 Problems While Working With RFID 102 Connecting Directly to the RFID Module 103 Problems With Connectivity 104 Calling Intermec Product Support 106 Accessing Intermec Web
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 9
    Interfaces 117 Switching the High Side Using IF61 Power 118 Switching the Low Side Using IF61 Power 118 Switching the High Side Using Load 119 Using the Power Interface 120 A Specifications 121 IF61 Specifications 122 RFID Specifications 123 Port Pin Assignments 124 GPIO Port 124 Serial
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 10
    Contents x IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 11
    instructions for handling a particular condition or set of circumstances. Global Services and Support Warranty Information To understand the warranty for your Intermec product, visit the Intermec web site at www.intermec.com and click Support > Returns and Repairs > Warranty. IF61 Fixed Reader
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 12
    . For technical support in South Korea, use the after service locations listed below: AWOO Systems 102-1304 SK Ventium 522 Dangjung-dong Gunpo-si, Gyeonggi-do Korea, South 435-776 Contact: Mr. Sinbum Kang Telephone: +82-31-436-1191 E-mail: [email protected] xii IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 13
    , such as IP address. You should also be familiar with your RFID system. This revision of the manual supports the IF61 with firmware version 2.2x. Related Documents This table contains a list of related Intermec documents and their part numbers. Document Title Part Number Basic Reader Interface
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 14
    Before You Begin To download documents 1 Visit the Intermec web site at www.intermec.com. 2 Click Support > Manuals. 3 Use the Product Category field, the Product Family field, 123,129; 7,158,046; 7,158,091. There may be other U.S. and foreign patents pending. xiv IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 15
    Started This chapter introduces the IF61 Fixed Reader, explains the ports and LEDs, and explains how the reader fits into your network. It contains these topics: • Overview of the IF61 • What's New • Connecting to the IF61 • Installing the IF61 • Setting the Date and Time • Using the IF61 Securely 1
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 16
    band). The IF61 Fixed Reader uses an EPCglobal Gen 2-certified IM5 Module (915 MHz RFID frequency band). IF61 Fixed Reader Note: The IF61 does not ship with RFID antennas. For more information on these accessories, contact your Intermec sales representative. 2 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 17
    IF61 IF61 in a Wired Ethernet Network This illustration shows the IF61 in a wired Ethernet network. The IF61 sends tag data to the RFID application server through the wired network. RFID antenna Container with RFID tag IF61 Access point IF61 in a Wireless Network IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 18
    the RFID application server. Understanding the Network and Power Ports The IF61 network and power ports are located under the removable cable cover. To remove the cable cover • Unscrew the four screws on the cable cover to remove it. Removing the IF61 Cable Cover 4 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 19
    uses MDI/ MDI-X auto-switching so you can connect either a standard Ethernet cable or a crossover cable. Connect USB devices to the IF61. For more information, see "Managing USB Devices" on page 101. For more information, see "Port Pin Assignments" on page 124. IF61 Fixed Reader User's Manual 5
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 20
    six LEDs that indicate the status of the reader during operation. Intermec Ready-to-Work Indicator Power Wired LAN Wireless LAN RFID transmit Tag ID IF61 Fixed Reader LEDs IF61 LED Descriptions Icon Name Intermec Ready-to-Work™ indicator Power Wired LAN Wireless LAN Description Blue LED remains
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 21
    Chapter 1 - Getting Started IF61 LED Descriptions (continued) Icon Name RFID Transmit Description Flashes when the IF61 RFID reader is transmitting. Tag ID Flashes when an RFID tag ID is successfully read or written to. About the Intermec Ready-to-Work Indicator The blue Ready-to-Work
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 22
    require that this RFID reader uses only approved antennas. Therefore, this reader uses a custom antenna connector. Do not use antennas not approved for use with this reader. What's New The IF61 Fixed Reader now supports the new ETSI standard for RF products. 8 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 23
    default settings before you use this procedure. For more information, see "Using a Serial Communications Program" on page 93. To assign an initial IP address 1 Open a serial connection to the IF61. For help, see "Opening a Serial Connection to the IF61" on page 94. IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 24
    the entry field. 5 Press Enter. The static IP address is set. If you do not need to set the subnet mask or IP router values, you can now continue to configure the IF61 through the web browser interface. For help, see "Using the Web Browser Interface" on page 11. 10 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 25
    IP router address in the entry field. Press Enter to save the changes. 7 (Optional) To change the Ethernet link speed, press L and choose a link speed from the list of options: Ethernet Link Speed Options To choose this speed: Auto detect (default , add the IF61 IP address to your Exceptions list.
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 26
    . 2 Start the web browser. 3 In the browser address field, enter the IP address, and press Enter. The IF61 login screen appears. Or, for a secure session, click A secure session is available View certificate to see the security certificate before continuing. 12 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 27
    Chapter 1 - Getting Started IF61 Secure Login Screen 4 If necessary, enter a user name and password. The default user name is intermec and the default password is intermec. You can define the user settings appear when the IF61 is configured to use a DHCP server. IF61 Fixed Reader User's Manual 13
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 28
    RFID reader settings, see "Configuring BRI Settings" on page 64. For more information on other methods for managing the IF61, see "Managing the IF61 first. Disabling Help in the Web Browser Interface By default, the web browser interface shows help text as you move IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 29
    information, contact your local Intermec representative. Mounting the IF61: This illustration shows the correct orientation for mounting the IF61 with the mounting bracket. Note: The IF61 is certified to an IP54 environmental rating only when mounted as shown. IF61 Fixed Reader User's Manual 15
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 30
    . 5 (Optional) For a wireless network, connect the 802.11 antenna cable to port 1. 6 Connect the AC or DC power cord to the power port on the IF61. Note: The IF61 does not support power over Ethernet (POE). 7 Install the bottom half of the cable cover and route the cables through the openings. 16
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 31
    caught in the seam. 9 Place the IF61 in its mounting location. For help, . When you apply power, the IF61 boots and the green Power LED IF61. The IF61 is now ready to communicate with your network. Once the IF61 has been assigned an IP address (either manually 1 Connect to the IF61 via the web browser
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 32
    , or Common Internet File System (CIFS) shares. For help, see "Controlling Access Services" on page 29. • You can configure and use network security methods, or disable basic configuration through the serial port. For help, see "Configuring Security" on page 29. 18 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 33
    2 Configuring Network Settings This chapter describes how to configure network settings for the IF61 and includes these topics: • Configuring Settings for Your Network • Configuring Security • Configuring Wireless Security • Managing Certificates This chapter assumes that you are familiar with your
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 34
    Intermec SmartSystems, the Wavelink Avalanche client management system, and the Device Configuration web service. For more information on using these methods to configure the IF61, see Chapter 4, "Managing, Troubleshooting, and Upgrading the IF61 administrator. 20 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 35
    DHCP is disabled, the current values for IP address, subnet mask, and router appear in entry fields: 2 Configure the Ethernet settings. For help, see the next table. Note: Different settings appear in this screen depending on the current DHCP mode for the IF61. IF61 Fixed Reader User's Manual 21
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 36
    for the network. IP address of the IF61 is only routable on the local IP subnet. The IF61 auto-negotiates with other IF61. Auto-configuration is enabled by default. If you disable autoconfiguration, you need to specify an IPv6 address, subnet mask, and router. 22 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 37
    network mode and fragmentation threshold • IPv4 settings, including IP address, subnet mask, router, and DHCP status • IPv6 autoconfiguration Note: The IF61 802.11 wireless connection must not be on the same subnet as the Ethernet connection or errors may result. IF61 Fixed Reader User's Manual 23
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 38
    the next table. • Click Display Advanced Radio Parameters to see the current settings for network mode and fragmentation threshold, or to enable medium reservation. 24 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 39
    assigned IP address appears in this field. If DHCP is disabled, set this value to a static IP address for the 802.11g radio. Subnet mask that matches the other devices in your network. The subnet mask has the form x.x.x.x, where x is a number from 0 to 255. IF61 Fixed Reader User's Manual 25
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 40
    devices on another subnet. The IP address has the form x.x.x.x, where x is a number from 0 to 255. Enables IPv6 automatic configuration for the radio. Clear this check box to disable IPv6 auto-configuration on the IF61. Auto-configuration is enabled by default. If you disable autoconfiguration, you
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 41
    servers, see http://ntp.isc.org. • Local time zone • SYSLOG destination • Mounting Common Internet File System (CIFS) and NFS shares on the IF61 To configure common network settings 1 In the menu, click Network Configuration > Common. The Common screen appears. 2 Configure settings. For help, see
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 42
    DNS Server 2 Name for this IF61. The default is "IF61". The hostname can be either a simple hostname, or a qualified domain name (FQDN). If this IF61 obtains its IP address via DHCP, this parameter is sent to the DHCP server. If the server supports it, this field is used
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 43
    implemented for your network. The IF61 supports a variety of security features to help maintain the integrity of your secure network. You can: • change default network parameters. For help, see "Configuring the 802.11 Radio" on page 23. • enable/disable access services. For example, if you are
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 44
    screen appears. 2 Enable or disable developer access services by checking or clearing the check boxes, or by choosing options from the drop-down list. For help, see the next table. 3 Click Activate Changes to save your changes and immediately make them active. 30 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 45
    and password is intermec. The Telnet server is disabled by default. Enable CIFS/SMB Service Enables the Common Internet File System service, which creates a file sharing connection from a Windows PC to the /home/developer directory on the IF61. CIFS/SMB is disabled by default. When you enable
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 46
    via a serial connection to reset all passwords to default values. For help, see "Restoring the IF61 to the Default Configuration" on page 98. To configure the IF61 to use a password server 1 From the menu, click Security > Passwords. The Passwords screen appears. 32 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 47
    settings. For help, see the next table. 4 Click Activate Changes. 5 Configure the password server database. For help, see the documentation that came with your server. IF61 Fixed Reader User's Manual 33
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 48
    primary RADIUS server. Default is 1812. IP address or DNS name Intermec recommends that you change the default user name and password and create a read-only password. To set up logins 1 From the main menu, click Security > Passwords. The Passwords screen appears. 34 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 49
    a network application (such as a web browser, SmartSystems Console, Device Configuration Web Service application, or Avalanche Console) for all configuration. To disable serial port access 1 From the menu, click Security > Passwords. The Passwords screen appears. IF61 Fixed Reader User's Manual 35
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 50
    enabled the radio. The IF61 supports a variety of wireless network security protocols. You can configure: • WPA2 Enterprise (802.1x) security. For help, see "Configuring WPA2 Enterprise (802.1x) Security" on basic WEP security. For help, see the next section. 36 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 51
    or 802.11 Configuration. The 802.11 Configuration screen appears. 2 Choose Static WEP from the Security Level drop-down list. The Security Parameters list appears. IF61 Fixed Reader User's Manual 37
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 52
    WEP key this IF61 uses to encrypt transmitted data. Default is 1. Specifies whether encryption IF61. Choose Shared Key to require encryption or Open System to require no encryption. Enable this mode to allow the IF61 to communicate with CCX mixed-cell access points. 38 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 53
    802.11 Configuration. The 802.11 Configuration screen appears. 2 Choose Dynamic WEP/802.1x from the Security Level dropdown list. The Security Parameters list appears. IF61 Fixed Reader User's Manual 39
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 54
    this check box to reject expired certificates. Enable mixed cell Enable this mode to allow the IF61 to communicate with CCX mixed-cell access points. Mixed-cell use allows both WEP and non- .11 or 802.11 Configuration. The 802.11 Configuration screen appears. 40 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 55
    for WPA Personal security. For help, see the next table. • Click Display Advanced Security Parameters to see the current settings for multicast and pairwise encryption. IF61 Fixed Reader User's Manual 41
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 56
    TKIP: (Default) Use Temporal Key Integrity Protocol. CCMP: Use Counter Mode - CBC MAC Protocol. Configuring WPA Enterprise (802.1x) Security 1 From the menu, click Network Configuration > 802.11 or 802.11 Configuration. The 802.11 Configuration screen appears. 42 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 57
    settings and immediately make them active. Parameters for WPA Enterprise Security Parameter Description Allowed EAP Authentication Method Username Specifies which on the IF61. If you enable verification, you need to specify the CA certificate common name. IF61 Fixed Reader User's Manual 43
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 58
    - Configuring Network Settings Parameters for WPA Enterprise Security (continued) Parameter Description CA Certificate Common for unicast transmission/reception: TKIP: (Default) Use Temporal Key Integrity Protocol. CCMP: Use Counter Mode - CBC MAC Protocol. 44 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 59
    . 2 Choose WPA2 Personal (PSK) from the Security Level dropdown list. The Security Parameters list appears: 3 Configure WPA2 Personal settings. For help, see the next table. IF61 Fixed Reader User's Manual 45
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 60
    (Default) Use Counter Mode - CBC MAC Protocol. TKIP (RSN): Choose Temporal Key Integrity Protocol. Choose a data encryption method for unicast transmission/reception: CCMP: (Default) Use Counter Mode - CBC MAC Protocol. TKIP: Use Temporal Key Integrity Protocol. 46 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 61
    > 802.11 or 802.11 Configuration. The 802.11 Configuration screen appears. 2 Choose WPA2 Enterprise (802.1x) from the Security Level dropdown list. The Security Parameters list appears: 3 Configure WPA2 Enterprise settings. For help, see the next table. IF61 Fixed Reader User's Manual 47
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 62
    make them active. Parameters for WPA2 Enterprise Security Parameter Description Allowed EAP Authentication Method Default) Use Counter Mode - CBC MAC Protocol for multicast/group keying. TKIP: Use Temporal Key Integrity Protocol for multicast/group keying. 48 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 63
    Chapter 2 - Configuring Network Settings Managing Certificates The default server certificate on the IF61 (ValidForHTTPSOnly) provides support for secure network applications such as the secure web browser table lists the trusted CA certificate that is installed. IF61 Fixed Reader User's Manual 49
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 64
    . You will need to contact your local Intermec representative to purchase new certificates. Note: To install or uninstall certificates, you need to access the IF61 via a secure web browser. For help, the name of the certificate file to import entry field. 50 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 65
    , you will be prompted to log in again. Click A secure session is available and log in to the IF61. If a Security Alert dialog box appears, click Yes to proceed. Repeat Steps 1 and 2. 3 Click Server . If a Security Alert dialog box appears, click Yes to proceed. IF61 Fixed Reader User's Manual 51
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 66
    Chapter 2 - Configuring Network Settings 52 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 67
    can develop and test RFID applications for the IF61 and includes these topics: • RFID Applications and the IF61 • Creating RFID Applications for the IF61 • Installing RFID Applications on the IF61 • About the IF61 Edgeware Applications • About RFID Services • Configuring BRI Settings • Configuring
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 68
    Chapter 3 - Developing and Using RFID Applications RFID Applications and the IF61 The IF61 supports Java and C# applications. Your application communicates with the IF61 through one of two RFID services: • the Basic Reader Interface (BRI) server, which controls the reader by issuing BRI commands.
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 69
    . For help with installing applications on the IF61, see "Installing RFID Applications on the IF61" on page 59. Note: If you plan to auto-start your application when the IF61 boots, Intermec recommends that you install your software on the IF61 and start it manually to verify that the executable or
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 70
    DLLs, and a configuration file. Install the .zip file on the IF61 as described in "Installing RFID Applications on the IF61" on page 59. For more information on configuration files, see the named "testapp.exe" using the Mono runtime: CMDLINE=./testapp.exe 56 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 71
    IF61 does not support ASP.NET. IF61 Java Support The IF61 comes with a JDBC driver you can use to create applications that write data directly from the IF61 to a remote database. For more information, see "Java Support for Microsoft SQL Server and Sybase" on page 59. IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 72
    RFID Applications For more sophisticated Java development, the IF61 supports the open standard OSGi service-oriented architecture. This allows system administrators to install, uninstall, enable, and disable system services /bin/java -cp .:./BasicRFID.jar MyClass 58 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 73
    Intermec edgeware applications in .bin format, see "Upgrading or Installing Edgeware Applications" on page 62. To install applications on the IF61 1 From the menu, click Edgeware Applications > Install User Application. The Install User Application screen appears. IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 74
    RFID Applications 2 Click Browse and follow the prompts to navigate to the location of the application file. 3 Click Upload. The application is uploaded to the IF61. Managing Applications To maximize IF61 resources, you can start, stop, or uninstall IF61 appears. 60 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 75
    IF61 Edgeware Applications Edgeware applications are supplied by Intermec and its partner developers, and provide immediate functionality for your RFID system. The IF61 implementation on the IF61, see the IF61 SAP Device Controller User's Guide (P/N 934-025-xxx). IF61 Fixed Reader User's Manual 61
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 76
    as the SAP device controller or ALE engine. For help, see the next procedure. Note: Use only .bin files provided by Intermec. To install your own applications in .zip, .tar, .tar/bz2, or .tar/gz formats, see "Installing RFID Applications on the IF61" on page 59. 62 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 77
    IF61 reboots. Note: For information on uninstalling edgeware applications, see "Managing Applications" on page 60. About RFID Services The RFID service sets the protocol your application uses to communicate with the RFID module. The available services are: • BRI (Basic Reader Interface) - Intermec
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 78
    Chapter 3 - Developing and Using RFID Applications Configuring BRI Settings By default, the IF61 reader module uses BRI as its main protocol. This section explains how to configure BRI settings that control reader operation and communication with your application: • To configure BRI attribute
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 79
    Basic Reader Interface Programmer's Reference Manual. Tag Types Check the appropriate check boxes to enable RFID operations for these kinds of tags: • EPC Class 1 Gen 2 (default) • Phillips v1.19 • ISO6B/G1 • ISO6B/G2 This setting is equivalent to the TAGTYPE BRI attribute. IF61 Fixed Reader User
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 80
    corresponds to EPCID. Check the check box to enable tag ID reporting. This setting is equivalent to the IDREPORT BRI attribute, and is enabled by default. 66 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 81
    process. Valid range is 1 (default) to 254. This setting is equivalent to the SELTRIES BRI attribute. Unselect Tries (Not supported by EPCglobal Class 1 Gen 2 tags) Sets the number of times a group unselect is attempted. Valid range is 1 (default) to 254. IF61 Fixed Reader User's Manual 67
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 82
    RFID Applications Session (EPCglobal Class 1 Gen 2 tags only) Sets the command session parameter to the corresponding EPCglobal Class 1 Gen 2 air protocol command (default of ID Tries that the reader executes per antenna. Valid range is 1 to 254 (default is 3). 68 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 83
    reader mode, which is only supported by EPC Class 1 Gen 2 tags. When dense reader mode is enabled, these tags respond with Miller Sub carrier encoded data instead of FM0 encoded data. LBT Scan Enable LBT scanning is enabled, by default LBTSCANENABLE BRI attribute. IF61 Fixed Reader User's Manual 69
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 84
    power). Default is 30 IF61 front panel turns on and stays on. For more information, see "About the Intermec Ready-to-Work Indicator" on page 7. To configure BRI server settings 1 From the menu, click RFID Services > BRI > BRI Server. The BRI Server screen appears. 70 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 85
    This port must be unique for all TCP services running on the IF61. Valid range is 2189 to 65535. Default is 2189. Enables/disables logging of BRI navigation list, click RFID Services > BRI > BRI Log. The BRI Log screen appears with a list of BRI events. For more IF61 Fixed Reader User's Manual 71
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 86
    Using RFID Applications information IF61 supports version 1.0.1 of the EPCglobal Low-Level Reader Protocol (LLRP), which establishes a specific interface method between a reader and its corresponding client. Follow the next procedure to configure LLRP settings. 72 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 87
    , see http://www.epcglobalinc.org/standards/llrp. To configure LLRP settings 1 From the menu, click RFID Services > LLRP. The LLRP screen appears. 2 Configure LLRP settings as needed. For help, see the allow connections to the secure LLRP server on port 5085. IF61 Fixed Reader User's Manual 73
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 88
    reader-initiated TCP/IP connections to a remote LLRP client, enter this information: • Client Address - IP IP connection. About the Developer Tools Use the Developer Tools for basic testing of your RFID system. The Developer Tools support see "About the IF61 Edgeware Applications" on page the IF61,
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 89
    RFID Applications To test the GPIO interfaces 1 From the menu, click Edgeware Applications > Developer Tools > GPIO. The GPIO screen appears. When this screen appears, the four IF61 Commands and Running Scripts You can send BRI commands to the IF61 or load and run a BRI script through the web
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 90
    Chapter 3 - Developing and Using RFID Applications To send BRI commands 1 From the menu, click Edgeware Applications > Developer Tools > BRI and return values appear onscreen. For example, if you sent the ATTRIB command, the reader attributes appear in the list. 76 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 91
    Developing and Using RFID Applications To load instructions assume you understand how to create and edit JavaScript files. To create and run a JavaScript file 1 From the menu, click Edgeware Applications > Developer Tools > Workbench. The Workbench screen appears. IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 92
    on the drop-down menu and select the file name to reload it in the JavaScript Code box. 4 Click Run. The IF61 runs the JavaScript. Responses from the reader appear in the output pane. For example, if your script instructed the reader to read tags, the tag IDs appear in the Output Pane. 78
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 93
    Foundation • Using Wavelink Avalanche • Importing and Exporting Files • Accessing the IF61 via the Linux Shell • Opening a Serial Connection to the IF61 • Maintaining the IF61 • Troubleshooting the IF61 • Calling Intermec Product Support • Accessing Intermec Web Pages • Upgrading Firmware 79
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 94
    the next procedure to enable the web service or to download the Device Configuration web service description language (WSDL) document. For more information on the Device Configuration web service, see the Device Configuration Web Service Command Reference Manual. 80 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 95
    Chapter 4 - Managing, Troubleshooting, and Upgrading the IF61 To enable the web service and download the WSDL document 1 From the menu, click Network Configuration > Device Management. The Device Management screen appears. By default, Device Configuration web services are enabled for either secure
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 96
    . Contact your Intermec representative for a copy of the management information base (MIB). Before you can use an SNMP management station, you need to: • enable SNMP access to the IF61. By default, SNMP access is enabled. • define the IF61 SNMP community strings. 82 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 97
    Parameter Description Enable SNMP Access Clear this check box to disable SNMP access to the IF61. SNMP access is enabled by default. SNMP Community (Read-Only) Password for read-only access. Range is 1 to 15 characters, case- sensitive. Default is public. IF61 Fixed Reader User's Manual 83
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 98
    Must match a supported protocol on the SNMP management station. Choose DES, AES (128 bit), or None. Default is AES (128 bit). Using SmartSystems Foundation The IF61 ships with a SmartSystems™ client, which means you can manage it from a central host PC using Intermec's SmartSystems Foundation. The
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 99
    Chapter 4 - Managing, Troubleshooting, and Upgrading the IF61 To use SmartSystems Foundation 1 From the menu, click Network Configuration > Device Management. The Device Management screen appears. On the IF61, SmartSystems is enabled by default. 2 To automatically connect to the SmartSystems server
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 100
    Intermec Settings window appears. Intermec Settings: If you use the SmartSystems Console to manage the IF61, you can use Intermec Settings to configure the IF61. For help with using Intermec Settings, in the Intermec Settings browser choose Help > Online Manual. 86 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 101
    Chapter 4 - Managing, Troubleshooting, and Upgrading the IF61 Using Wavelink Avalanche The Wavelink Avalanche client management system at www.wavelink.com. To use Avalanche to manage the IF61, you need to enable Avalanche as described in the next procedure. IF61 Fixed Reader User's Manual 87
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 102
    , Troubleshooting, and Upgrading the IF61 To enable Avalanche 1 From the menu, click Network Configuration > Device Management. The Device Management screen appears. 2 Check the Enable Avalanche Access check box to enable Avalanche. 3 In the Avalanche Agent Name entry field, enter the IP address
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 103
    4 - Managing, Troubleshooting, and Upgrading the IF61 Note: Do not use this procedure to copy RFID applications or firmware upgrades to the IF61. • For help with upgrades, see "Upgrading Firmware" on page 107. • For help with installing applications, see "Installing RFID Applications on the IF61" on
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 104
    , Troubleshooting, and Upgrading the IF61 4 Type your user name and password in the User Name and Password fields (default for both is intermec), and then click Login. The IF61 FTP directory appears. Using CIFS File Sharing When you enable Common Internet File System (CIFS) file sharing on the IF61
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 105
    password in the entry fields and press Enter. The default user name and password is intermec. You can also map a drive on your desktop PC to the IF61 via its IP address or hostname. For help, see the Windows documentation. Accessing the IF61 via the Linux Shell Note: This section is for advanced
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 106
    To enable SSH, see "Controlling Access Services" on page 29. When you establish an SSH session with the IF61, you will be prompted to enter a login and password. These are the same as currently enabled for the web browser interface (default for both is intermec). SSH Connection Sample Screen: This
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 107
    059167). To access the Linux shell through a serial communications program 1 Open a serial connection to the IF61 as described in the next section, "Opening a Serial Connection to the IF61." 2 Type the login for the IF61 (default is intermec) and press Enter. IF61 Fixed Reader User's Manual 93
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 108
    Chapter 4 - Managing, Troubleshooting, and Upgrading the IF61 3 Type the password for the IF61 (default is intermec) and press Enter. The Linux $-prompt appears. You now have access to the IF61 Linux shell. Opening a Serial Connection to the IF61 You can connect the IF61 to your desktop PC via the
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 109
    help, see "Accessing the IF61 via the Linux Shell" on page 91. Maintaining the IF61 The Maintenance menu lets you view IF61 parameters and statistics, including a list of logged events. You may need this information if you need to call Intermec Product Support. IF61 Fixed Reader User's Manual 95
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 110
    Chapter 4 - Managing, Troubleshooting, and Upgrading the IF61 Viewing the System Log The System Log screen shows events that have been logged by the IF61. To view the System Log screen 1 From the menu, click prompts to save the log file to your desktop PC. 96 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 111
    space (in KB), and total storage space (in KB). • RFID Module firmware: Bootloader and firmware versions. • Network interface information, including MAC addresses. • Installed subsystems: versions of all currently loaded IF61 subsystems, including Linux. IF61 Fixed Reader User's Manual 97
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 112
    Chapter 4 - Managing, Troubleshooting, and Upgrading the IF61 Using the LEDs to Locate the IF61 You can use the LEDs to help locate a specific IF61 in your location. To locate an IF61 • In the About This IF61 RFID Reader screen, click Find This Device. The Intermec Ready-to-Work indicator and the
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 113
    IF61. For help, see "Opening a Serial Connection to the IF61" on page 94. 2 In the login field, type restore_defaults and then press Enter. 3 In the Password field, type restore_defaults and then press Enter. The IF61 reboots and the default settings are restored. IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 114
    . For example, you may need to reboot the IF61 to enable changes in an application. To reboot the IF61 1 From the menu, click Maintenance > Reboot. The Reboot screen appears. 2 Click Reboot to reboot the IF61. You need to log in again after the IF61 reboots. 100 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 115
    Troubleshooting, and Upgrading the IF61 Managing USB Devices You can connect USB devices such as flash drives or memory sticks to the IF61 USB ports. By default, the IF61 usb1 directory on the IF61, click Sync File Systems to copy the files to the USB device. IF61 Fixed Reader User's Manual 101
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 116
    , and Upgrading the IF61 Troubleshooting the IF61 This section includes lists of problems and possible solutions. Problems While Working With RFID Many problems you may encounter when working with your RFID system can be solved by carefully checking the RFID settings and changing them
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 117
    locally and to send line feeds with line ends. 4 Press Enter. The BRI prompt (OK>) appears. If the prompt does not appear, there may be a problem with the RFID module or your connection to the module. IF61 Fixed Reader User's Manual 103
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 118
    tag ID does not appear, there may be a problem with the RFID module or antenna system. Problems With Connectivity When troubleshooting problems with connectivity, make sure you know and understand these network-specific items: • TCP/IP settings • COM port settings for serial connections • Wireless
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 119
    may result. 3 If you used the web browser interface to restore defaults, the 802.11 radio was disabled. You need to connect to the IF61 via a wired Ethernet connection to enable and configure the radio. For help, see "Configuring the 802.11 Radio" on page 23. IF61 Fixed Reader User's Manual 105
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 120
    IF61. For help, see "Using the Web Browser Interface" on page 11. 2 To go to www.intermec.com, click Intermec in the upper right corner. To locate IF61 firmware or edgeware updates, from the main Intermec web page choose Support > Downloads and search for IF61. 106 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 121
    Chapter 4 - Managing, Troubleshooting, and Upgrading the IF61 Or, to download an Intermec product manual, click Manual in the upper right corner. Follow the prompts to search for and download manuals or other documentation. Upgrading Firmware Make sure the IF61 is connected to a reliable AC power
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 122
    . • Using Intermec SmartSystems Foundation Server. • Using Wavelink Avalanche. This section explains how to choose the correct configuration. To configure the firmware upgrade file 1 Double-click the Upgrade Package utility to run it. The opening screen appears. 108 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 123
    Troubleshooting, and Upgrading the IF61 2 Click Next. This screen appears: 3 If you are going to upgrade the IF61 via the web browser interface, by installing a USB drive in the IF61 going to use Intermec SmartSystems Server to upgrade the IF61, deselect the Web IF61 Fixed Reader User's Manual 109
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 124
    , click Maintenance > Firmware. The Firmware screen appears. 2 Click Browse to browse to the location of the upgrade file, and then double-click the filename. The name of the file appears in the Enter or select the name of the firmware upgrade file entry field. 110 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 125
    , Troubleshooting, and Upgrading the IF61 3 Click Upgrade IF61 RFID Fixed Reader. The upgrade process begins and the firmware is transferred to the IF61. You www.intermec.com/SmartSystems. • the IF61 upgrade file. For help, see "Configuring the Firmware Upgrade" on page 108. To upgrade the IF61 using
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 126
    Chapter 4 - Managing, Troubleshooting, and Upgrading the IF61 4 Drag-and-drop the upgrade file onto the IF61 you want to upgrade. SmartSystems server tells you that it is installing the upgrade on the IF61. The SmartSystems server shows the IF61 as being offline until the reader reboots and
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 127
    general purpose input/output (GPIO) interfaces and how to connect industrial controls such as motion sensors or indicator lamps to the IF61. This chapter includes the following topics: • About the GPIO Interfaces • Accessing the Interfaces • Using the Input Interfaces • Using the Output Interfaces
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 128
    the IF61 and designed for low voltage DC loads. The IF61 can also supply 12 VDC at 0.5 A to external devices. How the inputs and outputs are used depends on the RFID application more information on these GPIO accessories, contact your local Intermec distributor. 114 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 129
    IF61 input interface. If the external control device is a switch, you can connect one side of the switch to an IF61 +Input pin, and the other side of the switch to one of the +12 VDC sources. Ground the corresponding Input pin as shown in the next illustration. IF61 Fixed Reader User's Manual 115
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 130
    IF61 GPIO Interfaces +12V +Input - Input External input switch Ground IF61 remote input to chassis return of the IF61. The next illustration shows how this method good grounding practices for both the IF61 and the input device. In this situation, the IF61 provides power to the pull-up resistor
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 131
    . You can power the load directly from the IF61 or from an external power supply. In a typical IF61 • Switching the low side, with the load powered by the IF61 • Switching the high side, with the load powered externally • Driving a DC relay that controls an AC load IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 132
    - Output External indicator lamp 0.25A maximum Ground Switching the High Side Switching the Low Side Using IF61 Power For low side switching applications, the lamp power is routed to all the lamps in common Ground Switching the Low Side of the Output Load 118 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 133
    Chapter 5 - Using the IF61 GPIO Interfaces Switching the High Side Using External Power To Switching the High Side With External Power Driving a DC Relay to Control an AC Load While the IF61 outputs are designed to switch DC loads, they can drive relays that control AC loads. The next
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 134
    must be placed in an enclosure that meets local fire code regulations. Using the Power Interface The IF61 GPIO interface provides 12 VDC at 0.5 A for powering external inputs and loads, eliminating the need will be available at all +12 V pins on the GPIO port. 120 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 135
    A Specifications This appendix includes physical and electrical specifications for the IF61 and information about the port pin assignments. 121
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 136
    Appendix A - Specifications IF61 Specifications Specifications Height Length Width Weight AC electrical rating Operating temperature Storage temperature Humidity (non- Ethernet addressing 10 Mbps/100 Mbps 115,200 bps RFC 1213 (MIB-2), RFC 1398 (dot3) 2.6.18.1 122 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 137
    RFID Specifications Appendix A - Specifications Specifications Values Protocols Supported Frequency Range Usable channels Output power 865-867 MHz, 915 MHz 869 Up to 4, electronically switched 22 dB Antenna connectors 865-867 MHz: SMA 915 MHz: Reverse SMA IF61 Fixed Reader User's Manual 123
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 138
    ) High (10-48V) High (10-48V) High (10-36V) High (10-36V) High (10-36V) High (10-36V) Low-RTN Low-RTN Low-RTN 124 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 139
    1 Pin 9 Serial Port Pin Assignments Pin Description 1 NC 2 Receive data (RXD) 3 Transmit data (TXD) 4 NC 5 Signal ground 6 NC 7 NC 8 NC 9 NC Active Polarity High High IF61 Fixed Reader User's Manual 125
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 140
    Appendix A - Specifications Ethernet Port Pin 1 Ethernet Port Pin Assignments Pin Description Pin 1 LAN_RX+ 5 2 LAN_RX- 6 3 LAN_TX+ 7 4 VDC_A 8 Description VDC_A LAN_TXVDC_B VDC_B Note: The IF61 does not support power over Ethernet (POE). 126 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 141
    I Index 127
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 142
    , described 7 Bonjour service advertisement, enabling 31 booting the IF61 applications, starting at Intermec Ready-To- Work indicator 7 BRI TCP Port setting, for BRI server 71 BRI. See Basic Reader Interface C cable access door, removing 4 CDC/Foundation profile 57 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 143
    with communications program 9 default configuration, restoring 98 DHCP settings 22 DNS settings 26 Ethernet link speed 9 Ethernet settings 20 firmware, upgrading 107 Intermec Settings, using 86 IP address 9 network settings 20, 26 password server 32 RFID services 63 RFID settings 64 saving changes
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 144
    troubleshooting problems 104 events log, viewing in Maintenance menu 96 exporting files 88 external controls, using with IF61 114 firmware, upgrading 107 auto-loading from USB devices 101 Avalanche software package 112 installing upgrade file on IF61 configure IF61 9 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 145
    User Application screen 59 installing applications 59 edgeware 62 IF61 15 RFID antennas 16 Intermec manuals, how to download from web xiv, 106 Product Support, what to know when calling 106 Settings, application 86 SmartSystems Foundation 84 IP address 802.11 radio 25 Ethernet 22 setting with
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 146
    IF61 defaults, restoring 98 developer access, controlling 29 Device Configuration web service 80 firmware, upgrading 107 methods 80 security, configuring 29 SmartSystems Foundation 84 SNMP 82 using securely 18 Wavelink Avalanche 87 manuals, Intermec, how to download from web xiv, 106 Mono, support
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 147
    Tools 74 edgeware, enabling 60 IF61 settings, described 65 Java support 57 JavaScript support 59 module, configuring 63 Resource Kit, described 54 specifications 123 troubleshooting problems 102 RFID Transmit LED 7 Router entry field IF61 Fixed Reader User's Manual Index 802.11 radio 26 Ethernet
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 148
    67 top panel ports, described and illustrated 8 troubleshooting the IF61 102 connecting directly to RFID reader module 103 connectivity problems 104 default configuration, restoring 98 Intermec Product Support, calling 106 Maintenance menu, viewing 95 RFID problems 102 turning off help text 14
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 149
    WPA2 Enterprise (802.1x) security configuring 47 parameters, described 48 WPA2 Personal (PSK) security configuring 45 parameters, described 46 Write Tries setting 66 WRTRIES equivalent 66 WSDL document, downloading 81 www.intermec.com, accessing from IF61 web browser interface 106 IF61 Fixed Reader
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 150
    Index 136 IF61 Fixed Reader User's Manual
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 151
  • Intermec IF61 | IF61 Fixed Reader User's Manual - Page 152
    Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2009 Intermec Technologies Corporation. All rights reserved. IF61 Fixed Reader User's Manual *935-011-008* P/N 935-011-008
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
IF
61
Fixed Reader
User’s
Manual