Intermec PB2 PB2 and PB3 Battery Instructions

PB2 and PB3 Battery

Instructions

Using This Battery

This lithium-ion battery (Model 318-040-001) is designed for use in

these printers:

PB2 Mobile Printer

y

PB3 Mobile Printer

y

Charging the Battery

Before using your printer, you need to fully charge the battery. Batteries

can be charged after a partial discharge without affecting the original

battery capacity.

You can charge this battery:

installed in the printer with the printer AC adapter/charger

y

(Model CPS024100240).

in the 2-bay battery charger (Model EC-556).

y

Use only these Intermec-approved charging accessories. For more

information, see the printer user’s guide.

PB2 and PB3 Battery Instructions

*943-217-003*

P/N 943-217-003

Worldwide Headquarters

6001 36th Avenue West

Everett, Washington 98203

U.S.A.

tel

425.348.2600

fax 425.355.9551

www.intermec.com

© 2009 Intermec Technologies

Corporation. All rights reserved.

Specifications

Design and speciﬁcations are subject to change without notice.

Physical Specifications

Product:

Intermec Li-ion battery

(Model 318-040-001)

Dimensions:

7.1 x 3.8 x 2.1 cm (2.8 x 1.5 x 0.8 in)

Weight:

110 g (3.9 oz)

Capacity and Output Specifications

Maximum output:

x

7.4 V (16.28 Wh)

Nominal output:

x

7.4 V (16.28 Wh)

Capacity:

2200 mAh

Temperature and Humidity Specifications

Operating temperature:

-20°C to 60°C (-4°F to 140°F)

Charging temperature:

0°C to 45°C (32°F to 113°F)

Storage temperature:

-20°C to 40°C (-4°F to 104°F)

Operating humidity:

45% to 85% non-condensing

Storage humidity:

45% to 85% non-condensing

Note:

In the U.S.A., the EPA does not consider spent Li-ion

batteries as hazardous waste.

Caution: This battery pack may ignite, create a chemical burn hazard, explode, or

release toxic materials if mistreated. Do not incinerate, disassemble, or heat above

80°C (176°F). Do not short circuit; may cause burns. Keep away from children. Use

only Intermec charger Models CPS024100240 and EC-556. Use of incorrect charger

may present a risk of ﬁre or explosion.

CONTAINS LITHIUM-ION BATTERY.

WASTE BATTERY MUST PROMPTLY BE RECYCLED OR DISPOSED OF

PROPERLY. SEE INSTRUCTIONS.

Proper Disposal of Waste Batteries

Some of the substances necessary for the proper functioning of batteries are considered harmful to the

environment and to human health. It is therefore important that those substances be kept out of the

environment.

You play an important role in the protection of the environment:

Keep all waste batteries out of unsorted trash.

1.

Dispose of all waste batteries in separate collection for treatment and recycling.

2.

Please contact Intermec for the collection option(s) available in your location.

Marking of the battery:

The wheeled-bin symbol indicates the requirement for separate collection of the battery.

1.

Two letters shown underneath the wheeled bin indicate the presence of a certain substance:

2.

Hg means Mercury is present

a.

Cd means Cadmium is present

b.

Pb means Lead is present

c.

The Moebius loop (chasing arrows) indicates that the battery is recyclable.

3.

Important Recommendations

Charge the battery before use.

y

See “Charging the Battery” for approved charging methods. Use of this

y

battery in other devices could result in damage to the device or battery.

The temperature range for charging batteries is 0°C to 40°C (32°F to

y

104°F). Do not charge battery packs outside this range. For maximum

battery life, charge batteries at 23°C (73°F).

Do not store the battery at temperatures above 60°C (140°F), such

y

as inside a car on a hot day or in direct sunlight, as this may damage

the battery.

Battery usage by children should be supervised

y

.

Do not disassemble or open, crush, bend or deform, puncture, shred, or

y

burn.

Do not modify the battery or attempt to insert foreign objects into the

y

battery.

Do not solder directly to the battery contacts.

y

Do not immerse the battery in water.

y

Do not short circuit the battery. Keep the battery connector away from

y

metallic items.

Do not apply mechanical shocks or pressure to the battery.

y

Avoid dropping the battery or the printer. If you suspect that the

y

battery or printer is damaged, send it to an Intermec service center

for inspection.

Replace battery only with another Model 318-040-001 battery.

y

These batteries have been tested in accordance with applicable safety

standards. Contact your Intermec sales representative or distributor if

this battery is no longer available.

Discarded batteries may create a safety hazard. Before disposal,

y

cover the battery connector with electrical insulating tape.

Intermec PB2 PB2 and PB3 Battery Instructions

Intermec PB2 Manual

Intermec PB2 manual content summary: