Intermec PF4i PF4i Tray Installation Instructions

PF4i

Cutter Tray Installation Instructions

Use these instructions to install the tray onto the PF4i Cutter for the

EasyCoder PF4i Printer. The shipping box contains the tray, secure plate,

screws, washers and these instructions.

To install the tray

1

Attach the tray to the cutter by inserting the hinges of the tray into the

slots on the cutter.

2

Slide the flange at the rear of the secure plate into the slot between the

cutter and the front of the printer.

3

Align the alignment pins on both sides of the secure plate to the tray.

4

Insert and tighten the screws and washers to secure the tray to the secure

plate.

Tray

Secure plate

Screw

Screw

Alignment pin