Intermec PR2 1013AB01 and 1013AB02 Battery (PR2/PR3) Instructions

1013AB01 and 1013AB02 Battery (PR2 and PR3) Instructions

*943-340-001*

P/N 943-340-001

Specifications

Design and speciﬁcations are subject to change without notice.

Physical Specifications

Product:

Intermec 1013AB01 Rechargeable Li-ion battery

Intermec 1013AB02 Rechargeable Li-ion battery

Dimensions:

57.6 x 42.0 x 25.1 mm (2.27 x 1.65 x 0.99 in)

Weight:

95 g (3.35 oz)

Capacity and Output Specifications

Nominal output:

x

7.4 V

Capacity:

1620 mAh (11.99 Wh)

Temperature and Humidity Specifications

Operating temperature:

-10 °C to 50 °C (14 °F to 122 °F)

Charging temperature:

0 °C to 40 °C (32 °F to 104 °F)

Storage temperature:

For up to 1 month

-20 °C to 50 °C (-4 °F to 122 °F)

For up to 3 months

-20 °C to 45 °C (-4 °F to 113 °F)

For up to 6 months

-20 °C to 30 °C (-4 °F to 86 °F)

Relative humidity:

0% to 95% non-condensing

Caution: This battery pack may ignite, create a chemical burn hazard, explode, or

release toxic materials if mistreated. Do not incinerate, disassemble, or heat above

100 °C (212 °F). Do not short circuit; may cause burns. Keep away from children.

Use only Intermec charger Models 1002UU02, 1002UU04, CPS024100240, and

AE38. Use of incorrect charger may present a risk of ﬁre or explosion.

CONTAINS

LITHIUM-ION BATTERY. WASTE BATTERY MUST PROMPTLY BE RECYCLED

OR DISPOSED OF PROPERLY. SEE INSTRUCTIONS.

Proper Disposal of Waste Batteries

Some of the substances necessary for the proper functioning of batteries are considered harmful to the

environment and to human health. It is therefore important that those substances be kept out of the

environment.

You play an important role in the protection of the environment:

1.

Keep all waste batteries out of unsorted trash.

2.

Dispose of all waste batteries in separate collection for treatment and recycling.

Please contact Intermec for the collection option(s) available in your location.

Marking of the battery:

1.

The wheeled-bin symbol indicates the requirement for separate collection of the battery.

2.

Two letters shown underneath the wheeled bin indicate the presence of a certain substance:

a.

Hg means Mercury is present

b.

Cd means Cadmium is present

c.

Pb means Lead is present

3.

The Moebius loop (chasing arrows) indicates that the battery is recyclable.

Worldwide Headquarters

6001 36th Avenue West

Everett, Washington 98203

U.S.A.

tel

425.348.2600

fax 425.355.9551

www.intermec.com

© 2012 Intermec Technologies

Corporation. All rights reserved.

Important Recommendations

y

Charge the battery before use.

y

See “Charging the Battery” for approved charging methods. Use of this

battery in other devices could result in damage to the device or battery.

y

The temperature range for charging batteries is 0 °C to 40 °C (32 °F to

104 °F). Do not charge battery packs outside this range. For maximum

battery life, charge batteries at 23 °C (73 °F).

y

Do not store the battery at temperatures above 50 °C (122 °F), such

as inside a car on a hot day or in direct sunlight, as this may damage

the battery.

y

Battery usage by children should be supervised

.

y

Do not disassemble or open, crush, bend or deform, puncture, shred, or

burn.

y

Do not modify the battery or attempt to insert foreign objects into the

battery.

y

Do not solder directly to the battery contacts.

y

Do not immerse the battery in water.

y

Do not short circuit the battery. Keep the battery connector away from

metallic items.

y

Do not apply mechanical shocks or pressure to the battery.

y

Avoid dropping the battery or the printer. If you suspect that the

battery or printer is damaged, send it to an Intermec service center

for inspection.

y

Replace battery only with another Model 1013AB01 or 1013AB02

battery. These batteries have been tested in accordance with applicable

safety

standards. Contact your Intermec sales representative or

distributor if this battery is no longer available.

y

Discarded batteries may create a safety hazard. Before disposal,

cover the battery connector with electrical insulating tape.

1013AB01 | 1013AB02

PR2 and PR3 Battery Instructions

Using the Battery

The Model 1013AB01 and 1013AB02 batteries are rechargeable

lithium-ion batteries designed for use in the PR2 and PR3 Mobile

Receipt Printers.

Charging the Battery

You can charge the 1013AB01 and 1013AB02 batteries with these

Intermec-approved battery charging accessories:

y

Dual Base (Model 1002UU02) (with 1002UC09)

y

Quad Base (Model 1002UU04) (with 1002UC09)

You can charge a 1013AB01 or 1013AB02 battery installed in a

PR2 or PR3 with these accessories:

y

Dual Base (Model 1002UU02) (with 1002UD09)

y

Quad Base (Model 1002UU04) (with 1002UD09)

y

AC Power Supply (Model CPS024100240)

y

Vehicle Power Adapter (Model AE38)

You can charge a battery after partial discharge without affecting

the original battery capacity. The maximum charging time for a

fully discharged battery is 4 hours. (Two batteries in a Dual Base

or Quad Base with 1002UC09 may take up to 6 hours.) It may take

less time to charge the battery depending on the battery charge

level.

Intermec PR2 1013AB01 and 1013AB02 Battery (PR2/PR3) Instructions

Intermec PR2 Manual

Intermec PR2 manual content summary: