Intermec PW50 PW50 Handstrap Instructions
Intermec PW50 Manual
 |
View all Intermec PW50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Intermec PW50 manual content summary:
- Intermec PW50 | PW50 Handstrap Instructions - Page 1
The handstrap (P/N 825-196-xxx) provides you with a convenient way to carry your PW50 printer. The handstrap kit contains these items: • Handstrap accessory • These instructions To attach the handstrap 1 Release the strap from the adjuster, and remove the strap from the VELCRO pad. Note: VELCRO - Intermec PW50 | PW50 Handstrap Instructions - Page 2
pad 4 Close the VELCRO pad over the strap. You are now ready to use the printer with the handstrap. 5 (Optional) Install another handstrap on the other side of the PW50. PW50 Handstrap Instructions *943-159-001* P/N 943-159-001 Worldwide Headquarters 6001 36th Avenue West Everett, Washington
-
1 -
2
 |
 |
The handstrap (P/N 825-196-xxx) provides you with a convenient way to carry your
PW50 printer. The handstrap kit contains these items:
•
Handstrap accessory
•
These instructions
To attach the handstrap
1
Release the strap from the adjuster, and remove the strap from the VELCRO
pad.
2
Insert the strap through the PW50 and VELCRO pad. Make sure the D-ring and
adjuster are oriented as shown at the top of the PW50.
PW
50
Handstrap Instructions
Note:
VELCRO is a trademark of Velcro Industries B.V.
Strap
D-ring
Adjuster
VELCRO pad