Intermec SR61 SR61T Tethered Scanner User's Guide

Intermec SR61 Manual

Get Intermec SR61 PDF manuals and user guides View all Intermec SR61 manuals
Add to My Manuals
Save this manual to your list of manuals

Intermec SR61 manual content summary:

  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 1
    SR61T Tethered Scanner SR61T1D, ST61T2D, SR61TL, SR61TXR, SR61THP, SR61TDPM User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 2
    a commitment on the part of Intermec Technologies Corporation. © 2009-2012 by Intermec Technologies Corporation. All rights reserved. The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 3
    Number Date 002 3/2009 003 8/2010 004 10/2012 Description of Change Revised to support hardware and software for release 2. Updates included new cables and data transmission settings. Revised to support all new SR61T models (SR61T1D-xxx, SR61TL-xxx, SR61T2D-xxx, SR61THP-xxx, and SR61TXR
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 4
    iv SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 5
    5 Optional Accessories 6 Desktop Stand 6 Hands-Free Stand 6 Wall or Vehicle Mount Holder 7 Dangle Suspension 8 Belt Holster 8 Wrist Strap 9 2 Scanning With the SR61T 11 Understanding the Lights 12 Intermec Ready-to-Work Indicator 12 Status Light 13 SR61T Tethered Scanner User's Guide v
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 6
    30 4 Configuring the SR61T 31 Basic Setup with Configuration Bar Codes 32 Resetting Your Scanner 32 Configuring Predefined Imager Modes 32 Configuring the Postamble 32 Configuring Your Scanner with EasySet 33 Online Setup with EasySet 33 Offline Setup with EasySet 35 5 Troubleshooting and
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 7
    Calling Product Support 38 Problems and Possible Solutions 39 Maintaining the SR61T 41 Upgrading the SR61T 41 Scanner Recovery 45 Cleaning the SR61T 46 A Specifications and Reading Distances 47 Specifications 48 Reading Distances 51 SR61T1D 52 SR61TL 53 SR61T2D 54 SR61THP 55 SR61TXR 56
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 8
    strictly observed to prevent equipment damage or destruction, or corruption or loss of data. Note: Notes either provide extra information about a topic or contain special instructions for handling a particular condition or set of circumstances. viii SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 9
    complete, tested programs. The code is provided "as is with all faults." All warranties are expressly disclaimed, including the implied warranties of merchantability and fitness for a particular purpose. Web Support Visit the Intermec web site at www.intermec.com to download our current manuals (in
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 10
    support in South Korea, use the after service SR61T, and how to install, configure, operate, maintain, and troubleshoot it. Related Documents The Intermec web site at www.intermec.com contains our documents (as PDF files) that you can download for free. To download documents 1 Visit the Intermec
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 11
    Manuals tab. If your product does not have its own product page, click Support > Manuals 039,252; 6,064,763; 6,095,422; 6,097,839; 6,102,289; 6,102,295; 6,119,941; 6,128,414; 6,138,915; 6,149,061; 6,149,063; 6,152,370; 6,155,490; 6,158,661; 6,164 pending. SR61T Tethered Scanner User's Guide xi
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 12
    Before You Begin xii SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 13
    1 Introducing the SR61T This chapter provides an overview of the SR61T Tethered Scanner. This chapter covers these topics: • What is the SR61T Tethered Scanner • Supported Interfaces • Powering the SR61T • Connecting the Interface Cable • Removing the Interface Cable • Accessories 1
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 14
    host computers. Scanner window Status light Intermec Ready-toWork Indicator Trigger SR61T Tethered Scanner The SR61T comes with one of these scan engine options: • 1D linear imager-SR61T1D-xxx • Laser scanner-SR61TL-xxx • 2D area imager-SR61T2D-xxx • Extra range area imager-SR61TXR-xxx • High
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 15
    CLASS B XXXXXXXX SR61T2D-XXX SR61T Scan Engine Option: The scan engine option of your SR61T can be found in the first part of the configuration number. In this illustration, the scan engine option is SR61T2D for 2D linear imager. Supported Interfaces The SR61T supports the following interfaces
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 16
    to the scanner in the same way. 1 Insert cable. Press firmly until inserted all the way. 2 Tighten the screw on the cable to secure it. Removing the Interface Cable To remove the cable follow these steps: 1 Loosen the screw on the cable. 2 Pull out the cable. 4 SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 17
    required and optional accessories. Required Accessories You will need one or more of the following required accessories for your SR61T. SR61T Cable List Cable 189-xxx 236-188-xxx 236-190-xxx SR61T Power Supply Cable Universal Intermec power supply 5V Part Number 851-089-xxx Note: A power cord is
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 18
    to store the SR61T when you are not using it. Hands-Free Stand SR61T Hands-Free Stand (P/N 203-877-xxx): The hands-free stand provides you with a convenient way to store the SR61T when you are not using it or scan items without having to hold your scanner. 6 SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 19
    Vehicle Mount Holder (P/N 203-876-xxx): The wall or vehicle mount holder provides you with a convenient way to store the SR61T when you are not using it. You can either attach the holder to a wall with screws or attach the holder to a vehicle with tie-wraps. SR61T Tethered Scanner User's Guide 7
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 20
    provides you with a convenient way to secure the scanner to your vehicle or work station. Belt Holster SR61 Belt Holster (P/N 825-179-xxx): The belt holster (P/N 825-179-xxx) provides you with a convenient way to carry the scanner when you are not using it. 8 SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 21
    Wrist Strap Chapter 1 - Introducing the SR61T SR61 Wrist Strap: P/N 825-184-xxx: The wrist strap provides you with a convenient way to keep the scanner securely hanging from your wrist when you're not using it. SR61T Tethered Scanner User's Guide 9
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 22
    Chapter 1 - Introducing the SR61T 10 SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 23
    2 Scanning With the SR61T This chapter explains how to scan bar codes and includes the following sections: • Understanding the Lights • Understanding the Beeps • Scanning Bar Codes 11
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 24
    you can activate the legacy mode using EasySet. For information on using EasySet see Chapter 4, "Configuring the SR61T" on page 31 Intermec Ready-to-Work Indicator The Intermec-Ready-to-Work indicator™ (blue LED) indicates that the scanner is ready to scan bar codes. This light stays on all the time
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 25
    scanner successfully decoded a bar code and sent seconds the data to the host device. Green light flashes 2 A configuration bar code was successfully read. times Red light on for 2 seconds Transmission error OR Configuration bar code was not accepted SR61T Tethered Scanner User's Guide 13
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 26
    information on using EasySet see Chapter 4, "Configuring the SR61T" on page 31. Default SR61T Beep Descriptions Beep Sequence What it Means Two beeps Single beep Two fast beeps Power-up The scanner successfully scanned a bar code. Configuration bar code successfully scanned Six very fast beeps
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 27
    make a lot of noise. By default the scanner vibrates at power-up. You can also configure the SR61T to vibrate when it successfully decodes a bar code. To turn on vibrate alert • Scan this bar code: Turn On Vibrate Alert To turn off vibrate alert • Scan this bar code: Turn off Vibrate Alert Note: For
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 28
    Codes For the SR61TL, SR61TXR, SR61T2D, SR61THP, and SR61TDPM do not look directly into the window area or at a reflection of the laser beam or laser aiming beam while scanning. Long-term exposure to the laser beam can damage your vision. The SR61T contains either a 1D linear imager (SR61T1D), 2D
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 29
    on your computer screen except when scanning with the SR61TL (laser imager). Print out and scan bar codes with the SR61TL (laser imager). When the SR61T successfully reads a bar code label, the SR61T beeps one time, the status light briefly turns green, and the scanner beam turns off. If Vibrate
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 30
    the scanner window at the bar code label and hold the SR61T steady a few inches from the label. 2 Pull the trigger. • If you are scanning with one of the 2D imagers, use the laser framing to position the imager over the bar code or area to capture. 24° 15° SR61T2D Laser Framing 30° 20° SR61THP and
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 31
    reads a bar code label, the SR61T beeps one time, the status light briefly turns green, and the scanner lighting turns off. If Vibrate Alert is enabled, the SR61T briefly vibrates. 4 Release the trigger. Hands-Free Scanning The SR61T is a hand-held scanner however using the Hands-Free Stand (P/N 203
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 32
    Chapter 2 - Scanning With the SR61T 20 SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 33
    3 SR61T Interfaces This chapter explains the different interfaces available with the SR61T: • USB Interface • RS-232 Interface • Keyboard Wedge Y-Cable Interface • Wand Emulation Interface 21
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 34
    supply connected to the USB cable. See the "Required Accessories" on page 5 for a list of part numbers for the different cables. Connecting a USB Cable To connect with a USB cable 1 Turn off your host device. 2 Connect the USB cable to your SR61T and to the host. Standard USB cable USB cable with
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 35
    SR61T uses the keyboard HID USB cable mode. Use these configuration bar codes to select the keyboard for your country. For additional keyboards see EasySet. North American Windows (*) French Windows French Canadian Windows 95/98 French Canadian Windows XP/2000 SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 36
    Chapter 3 - SR61T Interfaces German Windows Italian Windows UK English Windows Brazilian Portuguese Windows Slovakian Windows Spanish Windows Swedish Windows Japanese Windows Czech Republic Windows Hungarian 101-Key 24 SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 37
    : 1 Go to http://intermec.custhelp.com. 2 In the search box type "SR61T USB driver" and click Search. 3 Download the driver and instructions 4 Follow the installation procedure provided in Knowledge Central. Note: You can also install the virtual COM driver in EasySet version 5.6.5.4 or later by
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 38
    to the RS-232 cable. See the "Required Accessories" on page 5 for a list of part numbers for the different cables. Connecting an RS-232 Cable To connect with an RS-232 cable 1 Turn off your host device. 2 Connect the RS-232 cable to your SR61T and the host. Standard RS-232 cable RS-232
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 39
    This section provides configuration bar codes for a basic setup. All bar codes marked with (*) indicate the default value. For more configuration options see Chapter 4, "Configuring the SR61T" on page 31. Baud Rate 38400 57600 (*) 115200 128000 230400 SR61T Tethered Scanner User's Guide 27
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 40
    Chapter 3 - SR61T Interfaces 460800 Data Bits 7 Parity None (*) Odd Stop Bits 1 (*) 28 256000 8 (*) Even 2 SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 41
    Accessories" on page 5 for a list of part numbers for the different cables Connecting a Keyboard Wedge Y-Cable To connect with a Y-cable 1 Turn off your host device. 2 Connect the Y-cable to your SR61T . 5 If necessary, configure your SR61T for an International keyboard (see "International Keyboard"
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 42
    and the host or Intermec computer. 3 If necessary, use the configuration bar codes in the next section to configure your SR61T for wand emulation interface. Setting up the Wand Emulation Interface This section provides configuration bar codes for a basic setup. All bar codes marked with (*) indicate
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 43
    4 Configuring the SR61T This chapter provides some basic configuration bar codes and information on how to configure the SR61T using the EasySet configuration application. This chapter includes: • Basic Setup with Configuration Bar Codes • Configuring Your Scanner with EasySet 31
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 44
    options, use EasySet (see "Configuring Your Scanner with EasySet" on page 33). Resetting Your Scanner To reset your scanner, read the reset factory defaults configuration bar code. Reset factory defaults Configuring Predefined Imager Modes When using an SR61T2D, SR61THP or SR61TXR, you can
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 45
    Carriage Return Chapter 4 - Configuring the SR61T None Enter Configuring Your Scanner with EasySet EasySet is an Intermec configuration application that provides you with two ways to configure your scanner. • Online setup-send configuration commands from EasySet directly to the product. • Offline
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 46
    tab and then click on the Device Manager button.). The Intermec Virtual COM port is listed under Ports (COM & LPT). For USB Keyboard HID interface: The Online setup dialog box appears. Select your device and click OK. 7 EasySet connects to your scanner and retrieves the current configuration
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 47
    Chapter 4 - Configuring the SR61T Offline Setup with EasySet To configure your scanner offline by scanning bar codes 1 Start EasySet. The first time you start EasySet, the Select product dialog box appears. If the Select product dialog box does not appear, choose Product > Select or click on the
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 48
    Chapter 4 - Configuring the SR61T 36 SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 49
    5 Troubleshooting and Maintaining the SR61T Use this chapter to solve problems you may have while using the SR61T. This chapter contains these topics: • Troubleshooting the SR61T • Maintaining the SR61T 37
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 50
    or keyboard wedge interface, use Microsoft® Notepad. • If you are using an RS-232 or USB Virtual Com interface, use the EasySet ISCP Terminal window. For help, see the EasySet software. 2 Scan one of these bar codes: Get firmware version Get decode version 38 SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 51
    SR61T is configured for the type (1D, 2D, etc.) of bar code you are scanning. • The bar code you are trying to scan may be poorly printed or too small. Scan a known good bar code to make sure that the SR61T is working properly. For more information, see "Scanning Bar Codes" on page 16. SR61T
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 52
    light turns number may be configured so the SR61T does not on, but the SR61T does beep. To reset the SR61T, scan this bar code: not beep. Reset factory defaults You scan a The SR61T does not recognize or support the configuration bar code configuration bar code you scanned. and the SR61T beeps
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 53
    SR61T firmware update package from the Intermec web site at www.intermec.com. a Go to Support > Downloads. b From the Product Category drop-down list, choose Bar Code Scanners. c From the Product Family drop-down list, choose Rugged Scanners. d From the Product drop-down list, choose SR61 Hand
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 54
    download the firmware upgrade package and save it to your PC. f Unzip the .zip file. 2 Connect your SR61T to a host PC with the appropriate cable Note: If using a USB cable, you must use the USB Virtual Com USB cable mode. See "USB Cable Mode" on page 25. 3 Scan the Reset Factory Defaults bar code
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 55
    Chapter 5 - Troubleshooting and Maintaining the SR61T 7 Select the cable and click Next. 8 Use Browse to browse to the location of the firmware upgrade file (.bin), select the file, and click Open. Click Next. SR61T Tethered Scanner User's Guide 43
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 56
    on the Hardware tab and then click on the Device Manager button.). The Intermec Virtual COM port is listed under Ports (COM & LPT). 11 Click Start download. For RS-232 cables only, scan the Firmware upgrade bar code that appears on the screen and click OK. 44 SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 57
    Chapter 5 - Troubleshooting and Maintaining the SR61T Note: If your scanner cannot scan the bar code on your computer screen see "Problems and Possible Solutions" on page 39to find the firmware upgrade bar code. Print the page out and scan the bar code. When the firmware download is complete, the "
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 58
    Chapter 5 - Troubleshooting and Maintaining the SR61T Cleaning the SR61T Clean the scanner window as often as needed for the environment in which you are using the SR61T. To clean the scanner window, you can use soapy water or isopropyl alcohol. Opening the SR61T voids the warranty and may cause
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 59
    A Specifications and Reading Distances This appendix contains the technical specifications and reading distances for each scanner model. 47
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 60
    SR61T Physical Dimensions Length Height Width Weight 19.4 cm (7.6 in) 13.1 cm (5.2 in) 7.2 cm (2.8) 320 g (11.2 oz) Electrical Specifications Electrical rating x 5V, 1.7A Typical Power Consumption (5V power supply, ambient lighting, continuous scanning) SR61T1D SR61TL SR61T2D SR61THP SR61TXR
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 61
    SR61T1D SR61TL SR61T2D SR61THP SR61TXR SR61TDPM Scan angle: 40° Minimum X dimension: 4 mils (0.1 mm) Scan angle: 38° Min. X dimension: 4 mils Scan angles: 26° horizontal, 16.8° vertical Framing angles: 24° horizontal, 15° vertical Min. X dimension 1D: 6 mils Min. X dimension 2D: 7 mils Scan
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 62
    Symbologies for 2D Models (SR61T2D, SR61THP, SR61TDPM and SR61TXR) Australian Post Aztec BPO Canada Post Codabar Codablock A Codablock F Code 11 Infomail Intelligent mail Interleaved 2 of 5 Japan Post Matrix 2 of 5 Maxicode Micro PDF417 MSI Code 39 Code 93/93i Code 128 / GS1-128 DataMatrix Dutch
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 63
    in an office environment with extended reading activated by default (200 lux). Extended reading range is available for scanners with software version BF4_252 and later. Note: Minimum distances depend on the number of characters encoded in the bar code. SR61T Tethered Scanner User's Guide 51
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 64
    SR61T1D 0" 2" 4" 6" 8" 10" 12" 14" 16" 18" 20" in 10" 25 8" EAN/UPC 20 6" 0.125 mm/5 mils 15 4" 10 2" 5 0" 0 2" 5 4" 10 0.25 mm/10 mils 6" 15 0.5 mm/20 mils 8" 20 1 mm/40 mils 10" 25 cm 0 5 10 15 20 25 30 35 40 45 50 Symbology Code 52 SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 65
    Appendix A - Specifications and Reading Distances SR61TL 0" 8" 16" 24" 32" 40" 48 0 10 20 30 40 50 60 70 80 cm 0 20 40 60 80 100 120 140 160 Symbology Code 39 EAN/UPC Density 0.125 mm (5 mils) 0.5 mm (20 mils) 1.3 mm (51 mils) 0.33 ) 49 cm (19.29 in) SR61T Tethered Scanner User's Guide 53
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 66
    Distances SR61T2D 0" in 4" 8" 12" 16" 20" 24" 28" 32" 36" 10" 25 0.5 mm / 20 mils 8" 20 6" PDF417 10 mils 15 4" Data Matrix 10 mils 10 2" 5 0" 0 2" 5 4" 0.15mm 6 mils 10 6" 15 0.25 mm / 10 mils 8" 20 EAN/UPC 10" 25 cm 0 10 20 30 40 50 60 70 80 90 Symbology Code 39
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 67
    SR61THP 0" in 4" 8" 12" 16" 20" 24" 28" 32" 36" 40" 10" 25 EAN/UPC 8" 20 6" PDF417 10 mils 15 Data Matrix 4" 10 mils 10 2" 5 0" 0 2" 5 4" 0.125mm/5 mils 10 6" 0.5 mm / 20 mils 15 8" 20 1 mm / 40 mils 10" 25 cm 0 10 20 30 40 50 60 70 80 90 100 Symbology Code
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 68
    SR61TXR 0" in 40" 80" 120" 160" 200" 240" 280" 320" 96" 240 1 mm/40 mils 64" 160 0.25 mm 10 mils 32" 80 0" 0 32" EAN/UPC 80 64" 0.5 mm/20 mils 160 Data Matrix 2.5 mm/100 mils 96" 240 cm 0 100 200 300 400 500 600 700 800 Symbology Code depends on bar code length Maximum Distance
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 69
    mils 8" 1 mm / 40 mils 10" 15 20 25 cm 0 5 10 15 20 25 30 35 40 45 50 55 Symbology Code 39 EAN/UPC PDF417 DataMatrix Density 0.076 mm (3 mils) 0.1 mm (4 mils) 0.125 mm (5 mils) 0.5 mm (20 mils) 17 in) 10.5 cm (4.13 in) 4.5 cm (1.77 in) 14 cm (5.51 in) SR61T Tethered Scanner User's Guide 57
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 70
    Appendix A - Specifications and Reading Distances 58 SR61T Tethered Scanner User's Guide
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 71
  • Intermec SR61 | SR61T Tethered Scanner User's Guide - Page 72
    Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2010-2012 Intermec Technologies Corporation. All rights reserved. SR61T Tethered Scanner User's Guide *934-024-004* P/N 934-024-004
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
SR
61T
Tethered Scanner
SR61T1D, ST61T2D, SR61TL, SR61TXR, SR61THP, SR61TDPM
User’s Guide