JVC DLA-VS4010 Operation Manual
JVC DLA-VS4010 Manual
 |
View all JVC DLA-VS4010 manuals
Add to My Manuals
Save this manual to your list of manuals |
JVC DLA-VS4010 manual content summary:
- JVC DLA-VS4010 | Operation Manual - Page 1
Getting Started . D-ILA PROJECTOR DLA-VS4010 DLA-VS4810 INSTRUCTIONS Connection and Installation Network Settings Operation and Settings Others . Thank you for purchasing this JVC product. Please study this instruction manual carefully before starting to operate the unit, in order to use the - JVC DLA-VS4010 | Operation Manual - Page 2
service personnel. This projector is equipped with a 3-blade grounding type plug to satisfy FCC rule. If you are unable to insert the plug into the outlet, contact your electrician. FCC INFORMATION (U.S.A. only) CAUTION: Changes or modification not approved by JVC instruction manual cannot support its - JVC DLA-VS4010 | Operation Manual - Page 3
operate normally by following the operating instructions. Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of other hazards. - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine - JVC DLA-VS4010 | Operation Manual - Page 4
main supply. If a new main plug has to be fitted, then follow the instruction given below. WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT (Europe only): The compatibility and electrical safety. European representative of JVC KENWOOD Corporation is: JVCKENWOOD Deutschland GmbH Konrad-Adenauer - JVC DLA-VS4010 | Operation Manual - Page 5
Getting Started For the customers In the U.S.A. and Canada CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This Projector is classified as a CLASS 2 LASER PRODUCT. This CLASS 2 LASER PRODUCT label and - JVC DLA-VS4010 | Operation Manual - Page 6
Getting Started For the customers In other countries CLASS 1 LASER PRODUCT LASER CAUTION LABEL WARNING Do not look into the lens while in use. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Location - JVC DLA-VS4010 | Operation Manual - Page 7
Getting Started ENGLISH Information for Users on Disposal of Old Equipment and Batteries [European Union only] These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product or battery, please consider the - JVC DLA-VS4010 | Operation Manual - Page 8
10) Admin.Signal Menu 48 Others Troubleshooting 50 What to do when these messages instruction manual, warranty, and other printed materials. Content of this manual 0 Personal computers or computers are expressed as computers or PCs in this manual. 0 Contents of this manual are the copyright of JVC - JVC DLA-VS4010 | Operation Manual - Page 9
Getting Started Names and Functions of Parts Front/Right, Left and Rear Side F A Intake air Intake air Intake air G Intake air Intake air Exhaust air B CD E F . A Air Inlet/Filter F D Lens Mounting Bracket The air inlets absorb air to cool the interior of the projector. A filter is - JVC DLA-VS4010 | Operation Manual - Page 10
Started DVI 1 e-shift Sync DVI 2 1 RS-232C 2 USB LAN RS-232C DVI 3 OPERATE I/B STANDBY/ON LAMP DVI 4 WARNING J KLM . H [e-shift Sync] Terminal (DLA-VS4810 only) This is the input terminal for e-shift sync signals. I [DVI 1 to 4] Terminal This is an input terminal for video signals. Connect - JVC DLA-VS4010 | Operation Manual - Page 11
Connection and Installation Installation Please read the following carefully when installing this unit. Optional Projection Lens Mount the optional projection lens (P. 60). For details on mounting the lens, please consult your authorized dealer. Minimum Space Required Do not use a cover that may - JVC DLA-VS4010 | Operation Manual - Page 12
Connection and Installation Projector Installation Angle You can install this projector between ±90° both vertically and horizontally. Vertical Angle CAUTION 0 Special expertise and techniques are required for mounting this unit. Be sure to ask your dealer or a specialist to perform mounting. 0 - JVC DLA-VS4010 | Operation Manual - Page 13
Connection and Installation Installing the Projector and Screen It is recommended that this projector be installed at right angle to the screen. When a zoom lens (optional) is in use, you can make use of the lens shift feature of this projector to shift the projection screen vertically between 0% - JVC DLA-VS4010 | Operation Manual - Page 14
Connection and Installation Movable Range of Projected Image GL-MS4015SZ Zoom lens GL-MS4016SZ Zoom lens GL-MS4021SZ Zoom lens 50% Projected Image 25% 25% Overlaying projected images (when zoom lens is in use) Projecting images by stacking projectors The lens shift feature enables you to use - JVC DLA-VS4010 | Operation Manual - Page 15
Connection and Installation Projecting images by arranging projectors side by side The lens shift feature enables you to use up to two projectors that are arranged side by side. Arranging two projectors side by side enhances the brightness level, and helps to project images that are sufficiently - JVC DLA-VS4010 | Operation Manual - Page 16
Connection and Installation Screen Size and Projection Distance Adjust the distance from the lens to the screen to achieve your desired screen size. GL-MS4015SZ / GL-MS4016SZ / GL-MS4021SZ Zoom lens Projection Screen Size (Diagonal Length) 50" (Approx. 1.27 m) 60" (Approx. 1.53 m) 70" (Approx. 1. - JVC DLA-VS4010 | Operation Manual - Page 17
Connection and Installation GL-MS4011S Short focal length lens Projection Screen Size (Diagonal Length) 50" (Approx. 1.27 m) 60" (Approx. 1.52 m) 70" (Approx. 1.78 m) 80" (Approx. 2.03 m) 90" (Approx. 2.29 m) 100" (Approx. 2.54 m) 110" (Approx. 2.79 m) 120" (Approx. 3.05 m) 130" (Approx. 3.30 m) - JVC DLA-VS4010 | Operation Manual - Page 18
1024 1024×768 1ch Single DVI 1 Normal 1024×768 800×600 1ch Single DVI 1 Normal 800×600 640×480 1ch Single DVI 1 Normal 640×480 * (DLA-VS4810) An 8K image is displayed when e-shift sync signal is input. Displayed Projector Image 4096×2400 * (8192×4800) 4096×2160 * (8192×4320) 3840 - JVC DLA-VS4010 | Operation Manual - Page 19
Normal DVI 1 2 Stripes DVI 1 DVI 3 Connection and Installation 4 Stripes DVI 1 DVI 2 DVI 3 DVI 4 DVI 1 Cross DVI 2 DVI 3 DVI 4 . Connection During Single-Screen Mode Display Below is the connection example for four-channel signals from the computer. For two-channel signals from the - JVC DLA-VS4010 | Operation Manual - Page 20
Connection and Installation Connection During Two-Screen/Four-Screen Mode Display The two-screen/four-screen mode enables simultaneous display of signals from two or four computers. To select the two-screen mode, set "Display Mode" in the "Setting" menu to "Double". To select the four-screen mode, - JVC DLA-VS4010 | Operation Manual - Page 21
Connection and Installation Connection Example During Two-Screen Mode Desktop Computer To DVI Terminal To DVI Terminal DVI-D Cable (Sold Separately) DVI 1 e-shift Sync DVI 2 RS-232C 2 USB LAN RS-232C DVI 3 OPERATE I/B STANDBY/ON LAMP DVI 4 WARNING Laptop Computer . Connection Example - JVC DLA-VS4010 | Operation Manual - Page 22
Network Settings Connection Using a LAN Cable Connect this projector, the computer for controlling this projector, and the switching hub using LAN cables, followed by configuring the network. Connection Example When assigning a static IP address You can acquire the IP address from the controlling - JVC DLA-VS4010 | Operation Manual - Page 23
Specifications of PC for Controlling this Projector OS Browser Windows 7 (32-bit, 64-bit), Windows 8 (32-bit, 64-bit), Windows 10 (32-bit, 64-bit) Internet Explorer 10, Internet Explorer 11, Google Chrome, Firefox MEMO 0 Windows is either registered trademark or trademark of Microsoft Corporation - JVC DLA-VS4010 | Operation Manual - Page 24
about 45 seconds. Thereafter, only the [STANDBY/ON] indicator lights up in red. MEMO 0 The default IP address of all DLA-VS4010 / DLA-VS4810 is "192.168.0.2". If multiple units of DLA-VS4010 / DLAVS4810 are used on the same network, do not turn on the main power of more than one projector unit at - JVC DLA-VS4010 | Operation Manual - Page 25
"Properties" 5 Set the IP address A Select "Use the following IP address" B Set "IP address" (For example, use 192.168.0.100 when DLA-VS4010 / DLA-VS4810 is in its default settings) A B MEMO C 0 Make sure that you take note of the original IP address before altering. D 0 When setting - JVC DLA-VS4010 | Operation Manual - Page 26
Setting (Changing) the IP address of this projector When using Internet Explorer 1 Launch the Internet Explorer on the computer 2 Check if the proxy has been set in the "LAN Setting" of the Internet Explorer A Click "Tools" and select "Internet Options" B Click "Connections" and click "LAN - JVC DLA-VS4010 | Operation Manual - Page 27
Network Settings Enter "http://192.168.0.2" in the 4 address field of the Internet Explorer, and click "Go" 0 A login screen for this projector appears. http://192.168.0.2 4 7 Click "Admin.Network" in the "Main" menu Main Image Setting Convergence Lens Option Admin.Network Admin.E-Mail Admin. - JVC DLA-VS4010 | Operation Manual - Page 28
Assigning IP Address from the DHCP Server The IP address is automatically assigned by the DHCP server. 1 After connecting, turn on the main power 0 Refer to P. 22 on the details of connection. 0 Refer to P. 24 on procedures to turn on the main power. 2 Set the "DHCP Client" setting of this projector - JVC DLA-VS4010 | Operation Manual - Page 29
Projecting Image If setting for this projector is not completed, refer to "User Settings Menu"P. 34 upon turning on the power and configure the settings accordingly. Once the basic settings are configured, this projector can be used by simply performing the following operation procedures. 0 Remove - JVC DLA-VS4010 | Operation Manual - Page 30
3 Adjust the zoom ratio (screen size) (when zoom lens is in use) You can adjust the focus using the "Zoom" item of the "Lens" menu. Main Image Zoom Focus Shift w + U Setting Convergence Lens Option License L _ T host PJ-1 user: root Logout R D Test Pattern OFF OFF SET Operation and - JVC DLA-VS4010 | Operation Manual - Page 31
5 Adjust the focus You can adjust the focus using the "Focus" item of the "Lens" menu. To move the focus point closer: Press the "+" (Near) end of "Focus" To move the focus point away: Press the "-" (Far) end of "Focus" MEMO 0 The focus changes each time you click on the inner buttons (a / b). ( - JVC DLA-VS4010 | Operation Manual - Page 32
8 Turn the main power at the rear of the projector unit to off [X] 0 The [STANDBY/ON] indicator on the projector unit goes off. CAUTION 0 Do not turn off the main power supply switch when in the cool down mode. Doing so may shorten the lamp life and cause a malfunction. 0 Upon using, attach the lens - JVC DLA-VS4010 | Operation Manual - Page 33
Displaying the Menu 1 Enter the IP address assigned in the address field of the Internet Explorer, and click "Go" (P. 27) 0 Example: When IP address assigned is "192.168.0.2", enter "http://192.168.0.2". http://192.168.0.2 1 Operation and Settings . MEMO 0 When "LAN Setting" in Internet - JVC DLA-VS4010 | Operation Manual - Page 34
User Settings Menu After installation and connection are complete, perform the necessary adjustment and setting. Operate the menus using the computer's browser to make adjustments and configure settings. User Settings Menu Structure Page Menu Name (1) Main (2) Image (3) Setting (4) Convergence (5) - JVC DLA-VS4010 | Operation Manual - Page 35
(1) Main Menu This menu displays the ON/OFF status of the power supply and information on signals input to the projector. host PJ-1 user: root Logout Main Image Setting Convergence Lens Option License Power ON OFF PROJECTION Light Source Time 10h59m Signal Status DVI Rate(Hz) Pixel H Pixel V - JVC DLA-VS4010 | Operation Manual - Page 36
R indicates the factory default. Item Warning Status Setting Value - Light Source Time - Signal Status DVI - Rate(Hz) Pixel H - Pixel V - Link - - Temperature Exhaust - Intake Inside - - Hide R OFF ON Description Displays the latest error number. MEMO 0 For details on the - JVC DLA-VS4010 | Operation Manual - Page 37
(2) Image Menu This menu is used for adjusting the image quality. Main Image Setting Convergence Lens Option License Brightness Red -30 Green -30 Blue -30 Contrast Red -30 Green -30 Blue -30 Gamma A B C host PJ-1 user: root Logout 0 +30 0 +30 0 +30 0 +30 0 +30 0 +30 Hide OFF - JVC DLA-VS4010 | Operation Manual - Page 38
(3) Setting Menu This menu is used for specifying the input level of the terminal and the display mode. host PJ-1 user: root Logout Main Image Setting Convergence Lens Option License Input Level 0-255(PC) 16-235 Display Mode 1 13 12 34 . R indicates the factory default. Single Double Cross - JVC DLA-VS4010 | Operation Manual - Page 39
(4) Convergence Menu This menu is used for correcting color shifts in the optical system. Main Image Setting Convergence Lens Option License Red U Blue L RL D Test Pattern OFF OFF host PJ-1 user: root Logout U R D SET . R indicates the factory default. Item Red Blue Test Pattern Setting - JVC DLA-VS4010 | Operation Manual - Page 40
(5) Lens Menu This menu is used for adjusting the projection lens. Main Image Setting Convergence Lens Option License Zoom w Focus + Shift L T_ Test Pattern OFF OFF host PJ-1 user: root Logout U R D SET Operation and Settings Item Zoom Focus Shift Test Pattern 40 . Setting Value - - - - - JVC DLA-VS4010 | Operation Manual - Page 41
(6) Option Menu This menu is used for specifying the settings for screen display method, LD block brightness and others. Main Image Setting Convergence Lens Option License Flip Horz. ON OFF host PJ-1 user: root Logout Vert. ON OFF Light Source Power Mode1 Mode2 Message Display ON OFF Back - JVC DLA-VS4010 | Operation Manual - Page 42
Administrator Settings Menu After installation and connection are complete, perform the necessary adjustment and setting. Operate the menus using the computer's browser to make adjustments and configure settings. Administrator Settings Menu Structure For details on page menu (1) to (6), refer to " - JVC DLA-VS4010 | Operation Manual - Page 43
(7) Admin.Network Menu For configuring the network settings. Main Image Setting Convergence Lens Option Admin.Network Admin.Mail Admin.Option Admin.Signal License Host Name Setting Host Name PJ IP Address Setting DHCP Client DHCP STATIC IP IP Address 192.168.1.100 Subnet Mask 255.255.255.0 - JVC DLA-VS4010 | Operation Manual - Page 44
: 192.168.0.2) STATIC IP (Default Value: 255.255.255.0) address from the DHCP server automatically. : Select this to configure the IP address manually. (Default Value: 192.168.0.254) - IP Address : Specify the IP address. Subnet Mask : Specify the subnet mask. Default Gateway : Specify the - JVC DLA-VS4010 | Operation Manual - Page 45
(Example) When error occurs at the DD-RB board Sender ****** (setting value for "E-Mail Sender") Mail title 4KPJU2 report mail Message Error Code 32 "Trouble with DD-RB circuit board." System Time 106 h 57 m Light Source Time 41 h 57 m Exhaust Temp. 42 deg.C Inside Temp. 40 deg.C Intake Temp - JVC DLA-VS4010 | Operation Manual - Page 46
R indicates the factory default. Item Setting Value Description E-Mail Setting E-Mail ON R OFF For configuring the e-mail feature. ON : Use the mail feature. OFF : Do not use the mail feature. E-Mail Sender - For specifying the destination e-mail address of this projector. (Default - JVC DLA-VS4010 | Operation Manual - Page 47
(9) Admin.Option Menu This menu is used for specifying the image and option settings as well as resetting the lifetime of the LD block. host PJ-1 user: advanced Logout Main Image Setting Convergence Lens Option Admin.Network Admin.E-Mail Admin.Option Admin.Signal License Color Depth 8bit 12bit - JVC DLA-VS4010 | Operation Manual - Page 48
(10) Admin.Signal Menu This menu is for configuring settings such as display format, and for rewriting EDID. host PJ-1 user: advanced Logout Main Image Setting Convergence Lens Option Admin.Network Admin.E-Mail Admin.Option Admin.Signal License Force Signal OFF SET OFF Signal Status DVI Rate( - JVC DLA-VS4010 | Operation Manual - Page 49
R indicates the factory default. Item Signal Status DVI Rate(Hz) Pixel H Pixel V Link Setting Value - Display Mode R Single Double Cross EDID - Description Displays information on the input signals. Same as "Signal Status" in the User Menu. DVI : Displays the DVI input terminal number. - JVC DLA-VS4010 | Operation Manual - Page 50
Troubleshooting Check the following points before sending this product for repair. The following phenomena are not malfunctions. If there is no abnormality on the screen when - JVC DLA-VS4010 | Operation Manual - Page 51
Video image does not 0 Is the lens cap removed? appear 0 Are devices properly connected? 0 Remove the lens cap. 0 Connect the devices correctly. P. 9 P. 19, 21 0 Is the power of the connected 0 Turn on the power of the connected devices turned on? devices. - 0 Are correct signals being - JVC DLA-VS4010 | Operation Manual - Page 52
What to do when these messages are displayed Messages are displayed when the LD block is exhausted or when a signal that is not usable is input. Message Lamp Time Over . Message Lamp Time Over Out of Range No Input Cause (Details) 0 Displayed when the lifetime of the LD block has exceeded 20,000 - JVC DLA-VS4010 | Operation Manual - Page 53
Warnings Using Indicators The lifetime of the LD block and warning mode are indicated by the indicators. For indicator displays during normal operation, refer to the note below. Indicator No. STANDBY/ON LAMP WARNING Description 1 When the lifetime of the LD block has exceeded 19,000 hours - JVC DLA-VS4010 | Operation Manual - Page 54
. Abnormally high ambient temperature around the lamp. The safety switch is activated. Trouble with CPU circuit board. Trouble with MAIN circuit board. Trouble with DD-RB circuit board. Trouble with DD-G circuit board. Trouble with SUB CPU circuit board. Cooling fan for the illumination system (PCS - JVC DLA-VS4010 | Operation Manual - Page 55
RS-232C Interface You can control this projector via a computer by connecting the computer to this unit using a RS-232C cross cable (Dsub 9 pins). The commands to control this unit and the response data format against the received commands are explained here. For details, please consult your - JVC DLA-VS4010 | Operation Manual - Page 56
Parameters used for the data format The following 2 types of parameters are used for command and response data: (1) ON/OFF (2) Special Parameter Each parameter is as follows: (1) ON/OFF Shows the status (ON or OFF) of the unit, such as POWER and HIDE. Character Hex 0 30 1 31 Meaning OFF ON - JVC DLA-VS4010 | Operation Manual - Page 57
or if you need to purchase the filter, please consult the authorized dealer from which this product is purchased or any nearby JVC servicing center. A A . A B B C AB Sponge CAUTION 0 Remove the four screws on the inner side (for fastening the filter cover). Filter Cover Sponge Filter Cover - JVC DLA-VS4010 | Operation Manual - Page 58
C CAUTION 0 Remove the four screws on the inner side (for fastening the filter cover). Filter Cover Filter Cover Filter Sponge 1 Remove the filter cover The filter is located at the front side of the projector unit. 2 Remove the sponge and filter Hold the center of the filter using your - JVC DLA-VS4010 | Operation Manual - Page 59
Routine Servicing Clean dirt on the cabinet Do this with a soft cloth. In case of heavy soiling, soak a cloth in neutral detergent diluted with water, wring dry - JVC DLA-VS4010 | Operation Manual - Page 60
(Excluding lens and small protrusions) Mass DLA-VS4010: 73.5 kg (Excluding lens) DLA-VS4810: 74.5 kg (Excluding lens) Optical Video input LAN USB RS-232C e-shift Sync (DLA-VS4810 only) DVI-D (dual link) 24 pins (supports 12-bit extended input) × 4 (supports HDCP*3) RJ45 × 1 Type B (Slave) × - JVC DLA-VS4010 | Operation Manual - Page 61
Optional Items Projection lens GL-MS4015SZ 0 1.50:1 to 1.84:1 1.22x zoom lens (80" to 300") GL-MS4016SZ 0 1.50:1 to 1.84:1 1.22x zoom lens (50" to 210") GL-MS4021SZ 0 2.15:1 to 3.65:1 1.69x zoom lens (80" to 300") GL-MS4011S 0 1:1.1 short focal length lens (50" to 250") Replacement filter/sponge ( - JVC DLA-VS4010 | Operation Manual - Page 62
Pin Arrangement 0 RS-232C Terminal 5 9 Pin No. 2 3 5 1, 4, 6-9 0 DVI-D Terminal RxD TxD GND NC Signal 6 1 . Action Incoming Data Outgoing Data Signal Ground - Signal Direction PC " This Projector This Projector " PC - 8 7 65 4 3 2 1 16 15 14 13 12 11 10 9 24 23 22 21 20 19 18 17 Others . - JVC DLA-VS4010 | Operation Manual - Page 63
Dimensional Outline Drawing Top Surface Side (Unit: mm) M10 . Front 660 676.5 934 127 Intake air 934 Intake air DVI 1 e-shift Sync DVI 2 1 RS-232C 2 USB LAN RS-232C DVI 3 OPERATE I/B STANDBY/ON LAMP DVI 4 WARNING M10 hole (x 12) Tightening depth: 10 to 20 688 187 . Rear Surface - JVC DLA-VS4010 | Operation Manual - Page 64
0418KSH-SW-XX DLA-VS4010 DLA-VS4810 D-ILA PROJECTOR . . © 2018
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
 |
 |
.
D-ILA
PROJECTOR
DLA-VS4010
DLA-VS4810
.
Thank you for purchasing this JVC product.
Please study this instruction manual carefully before starting to
operate the unit, in order to use the unit correctly.
We take no responsibility for any problems resulting from misuse
of this unit by operating this equipment other than instructed in this
manual.
INSTRUCTIONS
B5A-2460-10
Serial No.
For Customer use :
Enter below the model No. and
the serial No.
which are located
on the back of the cabinet. Retain
this information for future
reference.
Model No.
Getting Started
Connection and Installation
Network Settings
Operation and Settings
Others