Home » JVC Manuals » Projection Televisions » JVC HD61Z786 » Manual Viewer

JVC HD61Z786 Instructions

JVC HD61Z786 - 61" Rear Projection TV Manual

UPC - 046838018503

View all JVC HD61Z786 manuals

Add to My Manuals
Save this manual to your list of manuals

JVC HD61Z786 manual content summary:

JVC HD61Z786 | Instructions - Page 1
Projection Television Users Guide For Models: HD-70G886 HD-61Z886 HD-61Z786 Illustration of HD-70G886 and RM-C14G Important Note: In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the
JVC HD61Z786 | Instructions - Page 2
event of trouble, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover. Changes or modifications not approved by JVC could void the warranty. * When you don't use this TV set for a long period of time, be sure to disconnect both the power plug
JVC HD61Z786 | Instructions - Page 3
engineering or disassembly is prohibited. IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean for replacement of the obsolete outlet. 10) Protect the power cord
JVC HD61Z786 | Instructions - Page 4
servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power TV to allow satisfactory cooling. FCC Notice: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part the user
JVC HD61Z786 | Instructions - Page 5
Warnings Caring for the Cabinet Normally, light dusting with a soft, non-scratching duster will keep your TV clean. If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly moistened with water. You can add a few
JVC HD61Z786 | Instructions - Page 6
purchasing JVC's model HD-70G886, HD-61Z886 or HD-61Z786 HDTV-ready projection television which uses the high-quality HD-ILA projection system. This is one of the highest quality and most technologically advanced televisions available today. It is recommended that you read this instruction manual
JVC HD61Z786 | Instructions - Page 7
television to fall. 8. Do not replace the lamp immediately after use The lamp becomes extremely hot during use. If the lamp is touched immediately after use before of the program or software shown on the television. Please do not open the rear cabinet. 13. Usable Time Do not keep the TV on for more
JVC HD61Z786 | Instructions - Page 8
67 Power 68 Number Buttons 68 Tune 68 Input 68 TheaterPro D6500K 68 Return+/TV 69 Sound 69 Muting 70 Video Status 70 Natural Cinema 70 Sleep Timer 71 ML/MTS 71 Display 72 C.C 72 Channel 72 Volume 72 Favorite 73 Aspect 74 Aspect Ratios 74 Aspect Ratios in PC Mode 74 Menu 75
JVC HD61Z786 | Instructions - Page 9
77 Digital Sound 78 Aspect Ratio 78 Cable Card Application 79 i.LINK Auto Play 79 Software Update 79 Digital Button Functions . . . 80 Digital CH D/A (Digital/Analog) . . . . . 80 Sub Channel 80 i.LINK Menu 81 Controller 81 Device 82 Timer 83 Reservation 83 Timer Edit 84 Guide 85 Media
JVC HD61Z786 | Instructions - Page 10
6 i.LINK MENU 78 TIMER TUNE THEATER FAVORITE PRO 0 VIDEO STATUS C.C. NATURAL SOUND CINEMA 9 RETURN+ TV SUB CHANNEL SUB LIGHT MUTING CH GUIDE VOL OK VOL Note: Your television CH MENU VCR CHANNEL PREV NEXT BACK VCR DVD POWER TV VCR REW PLAY FF and/or remote control may differ REC
JVC HD61Z786 | Instructions - Page 11
Cables Used to connect an external antenna or cable TV system to your TV. S-Video Cable Component Cables Composite Cables Audio Cables JVC AV CompuLink capable components for an automated home theater. We recommend that before you start using your new television, you read your entire User's Guide
JVC HD61Z786 | Instructions - Page 12
your television to another device, as well as use the remote to set up your television. Rear Panel Diagram MODELS: HD-70G886 HD-61Z886 HD-61Z786 Note: The terminal labeled "SERVICE ONLY", is exclusively used to update the software version. SERVICE ONLY ATSC /DIGITAL CABLE IN I DIGITAL IN AV
JVC HD61Z786 | Instructions - Page 13
LAMP/PROGRAM LED POWER LED MEDIA CARD SLOT Close door when using media cards SD/ MMC MEMORY xD-Picture STICK Card COMPACT FLASH • For information on the LED, see page 99. • Media Card Slot is for HD-70G886 ONLY. To open the door, gently press the arrow. MODELS: HD-70G886, HD-61Z886, HD-61Z786
JVC HD61Z786 | Instructions - Page 14
NATURAL SOUND CINEMA 9 RETURN+ TV SUB CHANNEL SUB LIGHT MUTING CH GUIDE VOL OK VOL CH MENU VCR CHANNEL PREV NEXT BACK VCR DVD POWER TV VCR REW PLAY FF REC STOP PAUSE OPEN CLOSE STILL PAUSE RM-C14G RM-C14G MODELS: HD-70G886 HD-61Z886 HD-61Z786 • For information on remote control
JVC HD61Z786 | Instructions - Page 15
/DVD selector switch to VCR to control a VCR. Slide to DVD to control a DVD player. Please see pages 33 to 36 for instructions on programming your remote control to operate a cable box, VCR or DVD player. POWER T TV CATV MUL VCR DVD Note: • If the lamp replacement message appears when you turn the
JVC HD61Z786 | Instructions - Page 16
nearest power outlet and turn on the TV. • If you follow these diagrams and the television does not work properly, contact your local cable operator. • To connect a DVD player, see VCR Connection. A DVD player is optional • If you have a satellite television system, refer to the satellite TV manual
JVC HD61Z786 | Instructions - Page 17
VCR Connection Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user's manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of
JVC HD61Z786 | Instructions - Page 18
IN (Attachment) OUT OUT Coaxial Cable (Attachment) ATSC /DIGITAL CABLE IN I 75Ω (VHF/UHF) TV Rear Panel S-VIDEO R L V IN OUT S-VIDEO OR OVER VIDEO L I AUDIO I R INPUT-3 TV Rear Panel TV Rear Panel OVER Y VIDEO L Pb I AUDIO I R Pr INPUT-1 AUDIO OUT L R Y PB PR OUT Green
JVC HD61Z786 | Instructions - Page 19
Setup Connections Connecting to Monitor/Recording Output Terminal S-VIDEO VIDEO L AUDIO R MONITOR /REC OUT TV Rear Panel VCR IN OUT OR R L V IN OUT Notes: • When you make this connection, set the Video-1 Monitor Out menu to ON. See page 57. • If you are receiving ATSC/Digital Cable signal, it
JVC HD61Z786 | Instructions - Page 20
the VCR's PLAY button. • If your JVC brand VCR has "A code/B code remote control switching" (see your VCR's instruction book), using VCR A code will switch the TV to input 1. • Refer to your DVD instruction book for detailed connection information. • To connect a JVC HiFi receiver or amplifier for
JVC HD61Z786 | Instructions - Page 21
these using the television's rear input jacks, using the same instructions. INPUT MENU INPUT 4 S-VIDEO OPERATE + CHANNEL - OVER VIDEO + VOLUME TV. 3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on the side of the TV. Note: • If your camcorder is a mono sound
JVC HD61Z786 | Instructions - Page 22
can recreate a conversation scene in the movie more naturally. By using your TV's speaker as the center speaker, you can obtain the same sound effect as in a movie theater in you home theater sound system. TV Rear Panel Front Front Surround CENTER CHANNEL INPUT L AUDIO R CENTER CHANNEL OUTPUT
JVC HD61Z786 | Instructions - Page 23
from the back of the TV to the back of the amplifier. Notes: • This terminal can only output digital audio. • In order to use the optical output connection, select PCM or Dolby Digital on Digital Sound in the Digital Setup Menu. See page 78. • Refer to your owners manual on using your amplifier. 23
JVC HD61Z786 | Instructions - Page 24
displayed on your TV in their digital form. TV Rear Panel AUDIO OUT LR DTV Decoder DIGITAL OUT AV COMPULINK III VIDEO (DIGITAL) _ AUDIO (DIGITAL) HDMI to DVI shifted. Access the "DIGITAL-IN" in the initial setup menu to adjust it. (Refer to page 58.) • When you do the above connection, set
JVC HD61Z786 | Instructions - Page 25
can be displayed on your TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI compatible devices. HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all digital audio/video interface. HDMI provides and interface between any
JVC HD61Z786 | Instructions - Page 26
the other input connections on your TV. This allows you to free up the back of your television. 4) Connect a Blue Component Cable from the AV Receiver's PB MONITOR instruction manual for more information on connecting your speakers and other devices like a DVD player. • Use your AV Receiver's remote
JVC HD61Z786 | Instructions - Page 27
control signals bi-directionally over a single cable. (For example, a JVC audio signals and control signals. TV Rear Panel from the back of the TV to the back of the LINK device. • Refer to your owners manual on using your i.LINK device. • i.LINK D-VHS decks and HD-Camcorders (JVC brand only). If you
JVC HD61Z786 | Instructions - Page 28
terminal to the computer's audio output terminal. When the sound from the computer is mono, connect to the L/MONO of INPUT-3. PC IN (D-SUB) TV Rear Panel S-VIDEO OVER VIDEO L I AUDIO I R INPUT-3 Notes: • Refer to your computer manual for a detailed explanation of the connections concerning your
JVC HD61Z786 | Instructions - Page 29
supported. When a picture is not displayed With some computers, some problems can be solved by changing the settings. Check the computer's refresh rate and set it to 60Hz. Computers that cannot set the refresh rate to 60 Hz, can not be used with this TV. Refer to the computer's instruction manual
JVC HD61Z786 | Instructions - Page 30
. The plug-in menu helps you to get your TV ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear. • Setting the TV's clock to the correct time so your timer functions will work properly. You can choose "AUTO" or "MANUAL" for setting the
JVC HD61Z786 | Instructions - Page 31
before operating any timer functions. Manual Clock Set To set your clock manually (without using the XDS signal), choose MANUAL. If you choose AUTO, see auto clock set above. SET CLOCK MODE TIME TIME ZONE DATE/YEAR D.S.T. START CLOCK SELECT OPERATE MANUAL -- : -- -ATLANTIC JAN/01/05 ON MENU EXIT
JVC HD61Z786 | Instructions - Page 32
setup is now complete. You can now begin watching your television, or you can continue on in this guide for more information on programming your remote control, or using the JVC onscreen menu system to customize your television viewing experience. Notes: • If you want to cancel the Auto Tuner Setup
JVC HD61Z786 | Instructions - Page 33
the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer. Cable Box or Satellite Codes The remote control is programmed with cable box and satellite codes for power
JVC HD61Z786 | Instructions - Page 34
remote control is programmed with VCR codes for power on/off, play, stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to "TV Replay 024, 023 Jensen 003 JVC 003, 004, 005, 000,
JVC HD61Z786 | Instructions - Page 35
DVD Codes The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward, rewind, previous/next chapter, tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below. 2) Slide the first 2-way selector switch to "TV" and the
JVC HD61Z786 | Instructions - Page 36
Search Codes Cable/Satellite Search Codes Function 1) Slide the first 2-Way Mode Selector switch to CATV. 2) Press the POWER and RETURN+/TV buttons. Hold for at least three seconds and release. 3) Press the POWER button on the remote, and see if the cable or satellite box responds. 4) If there
JVC HD61Z786 | Instructions - Page 37
or selected item in a menu. To bring up the onscreen menu, press the MENU button on the remote control. The item that appears in green is the one currently selected. If you use the Menu button on the TV's front panel instead of the remote, an additional menu screen showing INPUT, VIDEO STATUS
JVC HD61Z786 | Instructions - Page 38
arrow buttons on the remote control. (These buttons are also the CH +/- and VOL +/- buttons. Channel and volume functions will not operate when the onscreen menu is active). The selected feature and option on a menu screen are highlighted in a different color. Selected Option (Green) LANGUAGE
JVC HD61Z786 | Instructions - Page 39
CODE AUTO DEMO OFF NEXT PAGE SELECT OPERATE (4/5) MENU EXIT INITIAL SETUP 04 CLOCK / TIMERS PREVIOUS SET CLOCK ON / OFF TIMER LAMP TIMER RESET NEXT PAGE SELECT OPERATE MENU EXIT CLOCK/TIMERS INITIAL SETUP PREVIOUS VIDEO-1MONITOR OUT TV SPEAKER AUDIO OUT DIGITAL-IN DIGITAL-IN AUDIO CENTER
JVC HD61Z786 | Instructions - Page 40
) To choose ATSC, DIGITAL CABLE or SKIP Press the OK button to start AUTO TUNER SETUP IN ANALOG TUNER MODE IN DIGITAL TUNER MODE AIR ATSC PRESS OK TO START SELECT OPERATE MENU EXIT Programming will take approximately 2 to 4 minutes. The auto tuner is finished when the message PROGRAMMING OVER
JVC HD61Z786 | Instructions - Page 41
you to customize the line-up of channels received by your TV. Regarding analog channels, you can add or delete channels from A&E 05 E! CHNO. SCAN ID 06 HBO 07 L 08 09 10 SELECT OK OPERATE MENU EXIT Digital Channels Channel Summary Digital CH No. D01 D02 D02 D10-1 D10-2 D12345 Scan
JVC HD61Z786 | Instructions - Page 42
set more than the 40 maximum, the message "MEMORY OVERFLOW" will appear. You can block access to a channel by activating the channel lock. Press the MENU button π† To CHANNEL SUMMARY √® To operate π†√® To the Lock Column ( ) Press the ZERO button to lock or unlock that channel Press the
JVC HD61Z786 | Instructions - Page 43
If the wrong code is entered, the message "INVALID LOCK CODE!" will flash on the screen. The channel cannot be accessed until the correct code to access the V-Chip menu To turn V-Chip ON or OFF (V-Chip must be turned ON for rating settings to operate) To move to SET US TV RATINGS, SET MOVIE RATINGS,
JVC HD61Z786 | Instructions - Page 44
Programming" category. Examples of Unrated programs: • Emergency Bulletins • News • Public Service Announcements • Sports • Some Commercials • Locally Originated Programming • Political Programs • Religious Programs • Weather Note: • TV programs or movies that do not have rating signals will be
JVC HD61Z786 | Instructions - Page 45
or comedic violence, which children should be able to discern from reality. Programs with the following ratings are designed for the entire audience. ❒ TV G stands for General Audience Most parents would find these programs suitable for all age groups. They contain little or no violence, no strong
JVC HD61Z786 | Instructions - Page 46
a lock icon. Once you've put a lock on the top row, everything in that column is automatically locked. π†√® To the TV 14 Column Press the OK button to lock Press the MENU button when finished Note: • If you want to change the setup, move the cursor to the top column and change
JVC HD61Z786 | Instructions - Page 47
adult material. ❒ G - General Audience In the opinion of the review board, these films contain nothing in the way of sexual content, violence under 18. Directions to set Movie (MPAA) Ratings π† √® π† √® Press the MENU button To V-CHIP To operate (Lock icon appears) Press ZERO to access V-Chip
JVC HD61Z786 | Instructions - Page 48
Canadian V-Chip Ratings Press the MENU button π† √® To V-CHIP CANADIAN RATINGS ENG (for English) To enter ratings menu For example: To block viewing of programming rated MENU button to finish SET CANADIAN RATINGS ENG 18+ 14+ PG G C8 C SELECT OK OPERATE MENU EXIT Note: • For instructions
JVC HD61Z786 | Instructions - Page 49
TV comes preset with a lock code of "0000". You may change the code to any four-digit number you wish. To change the lock code, follow the steps below. Press the MENU for information on setting your lock code). Notes: • After a power interruption you must reset the lock code. • Write your lock code
JVC HD61Z786 | Instructions - Page 50
SETUP PREVIOUS AUTO TUNER SETUP CHANNEL SUMMARY V-CHIP SET LOCK CODE AUTO DEMO NEXT PAGE SELECT OPERATE OFF (4/5) MENU EXIT Language The language function is described on page 30 as the interactive plug-in menu. If you need to choose the language again, follow the steps below. π† √® Press the
JVC HD61Z786 | Instructions - Page 51
To enter To select Auto To Set Preview Closed Caption Sample Type Service Appearance AUTO 1 Cancel Select Set BACK Operate Back MENU Exit Digital Closed Caption > Appearance Preview Closed Caption Sample Appearance Mode Font Colors Opacities Cancel Select Operate Auto Set BACK Back
JVC HD61Z786 | Instructions - Page 52
Closed Caption Sample Appearance Mode Font Colors Opacities Cancel Select Operate Manual Set BACK Back MENU Exit Digital Closed Back MENU Exit π† √® π† √® π† To Colors To enter To select Text, Edge or Background To select the setting you like Auto, White, Black, Red, Green, Blue, Yellow
JVC HD61Z786 | Instructions - Page 53
SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR Notes: NEXT PAGE SELECT OPERATE • Noise muting will not work during auto tuner setup or when you operate channel summary. • Noise muting will not work when the digital TV or i.LINK is displayed. ON OFF ON OFF (2/5) MENU EXIT 53
JVC HD61Z786 | Instructions - Page 54
NOISE MUTING FRONT PANEL LOCK V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR NEXT PAGE SELECT OPERATE ON OFF ON OFF (2/5) MENU EXIT • Use the remote control. • Press the MENU button on the front of the TV for more than 3 seconds. In this case, the OSD for FRONT PANEL LOCK
JVC HD61Z786 | Instructions - Page 55
input label (see chart below) Press the OK button to save Press the MENU button when finished INITIAL SETUP PREVIOUS NOISE MUTING FRONT PANEL LOCK V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR NEXT PAGE SELECT OPERATE VIDEO INPUT LABEL VIDEO-1 VIDEO-2 VIDEO-3 VIDEO-4 DIGITAL
JVC HD61Z786 | Instructions - Page 56
INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR NEXT PAGE SELECT OPERATE ON OFF ON OFF (2/5) MENU EXIT • When the On Timer turns ON, the LED is lit as "LOW" when you turn the power off. • If you set a timer on the TV, the power indicator will light even if the TV is on stand by. 56
JVC HD61Z786 | Instructions - Page 57
the sound level will be extremely loud. • After a power interruption, the TV speaker settings will return to "ON". Audio Out If your television is connected to an external speaker source, audio out gives you the option of controlling the volume level with your TV's remote control. Press the MENU
JVC HD61Z786 | Instructions - Page 58
capable of analog audio and digital video, choose ANALOG. • Refer to your DTV or HDMI component's instruction manual for more information. • When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page 78. Center CH Input When you are using a surround system, you can
JVC HD61Z786 | Instructions - Page 59
. BRIGHT You can adjust the overall brightness of the TV picture with the Bright control. DETAIL The Detail feature adjusts the level of fine detail displayed in the picture. Adjust the Picture Settings π† √ ® Press the MENU button To TINT, COLOR, PICTURE, BRIGHT or DETAIL To enter TINT +02
JVC HD61Z786 | Instructions - Page 60
TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated to produce natural hues. π† √® π† Press the MENU button To COLOR MANAGEMENT To enter To select the mode "ON" or "OFF" COLOR MANAGEMENT ON OFF Press the MENU button when finished Dynamic Gamma JVC these dark areas
JVC HD61Z786 | Instructions - Page 61
To select the mode "ON" or "OFF" Press the MENU button when finished SMART PICTURE ON OFF Note: • When you have "DYNAMIC" selected in the "VIDEO STATUS", Smart Picture is not selected. Reset Reset resets all picture adjustments (tint, color, picture, bright, detail, color temperature, dig. noise
JVC HD61Z786 | Instructions - Page 62
TREBLE - Use treble to adjust the level of high-frequency sound in your TV's audio. BALANCE - Adjust the level of sound between the TV's left and right speakers with the balance setting. Adjust the Sound Settings π† √ ® π† Press the MENU button To BASS, TREBLE or BALANCE To adjust the setting To
JVC HD61Z786 | Instructions - Page 63
OFF Press OK to finish Press the MENU button when finished When you set the clock manually, choose MANUAL by pressing the √ or ® arrows. SET CLOCK MODE TIME TIME ZONE DATE/YEAR D.S.T. reset the clock after a power interruption. You must set the clock before operating any timer functions. 63
JVC HD61Z786 | Instructions - Page 64
a decoy when you're not home. π† √® √® † √® † † √® † √® † √® † √® Press the MENU button To ON/OFF TIMER To enter (begins with ON TIME) To set the hour (AM/PM) you want the TV to turn on ON/OFF TIMER ON TIME OFF TIME CHANNEL ON VOLUME MODE ON/OFF TIMER 7:00 PM 10:00 PM 03 CURRENT EVERYDAY NO
JVC HD61Z786 | Instructions - Page 65
OPERATE MENU EXIT Press the OK button while the above message appears on the television screen. THE LAMP TIMER IS RESET SUCCESSFULLY. The lamp timer has now been reset. Notes: • You can use the Lamp Timer Reset only after replacing the lamp. • See Page 96 for instructions on lamp replacement. 65
JVC HD61Z786 | Instructions - Page 66
the menu button, only the picture adjust screen will appear. Twin Activate the split-screen option by pressing TWIN on the remote control. The the signal that you are watching is coming from the HDMI input, you cannot enter the SWAP or INDEX mode. • Main Screen and Split Screen will not display the
JVC HD61Z786 | Instructions - Page 67
the FREEZE button once again. Note: • When the screen is in freeze mode, if you do not operate it within 15 minutes, this function will cancel image by pressing the SWAP button. Note: • It will only work in TWIN mode. Select With SELECT, you can select the picture (channel) while viewing TWIN
JVC HD61Z786 | Instructions - Page 68
, you can change the input mode. Notes: • When you return to TV mode, press the RETURN +/TV button or direct 10 key pad or CHANNEL +/- button. • You can also access the FRONT CONTROL PANEL screen by using the MENU button on the side of the TV instead of the remote control. It appears between INITIAL
JVC HD61Z786 | Instructions - Page 69
CH- buttons. TV - Returns to the TV mode. Press the RETURN+/TV and hold SOUND - Decreases high sound levels, giving a regulated sound level. π† √® Press the SOUND button To select A.H.S.+, BBE or SMART SOUND To choose the setting Press the MENU when finished SOUND EFFECT A.H.S.+ BBE SMART SOUND
JVC HD61Z786 | Instructions - Page 70
of the VIDEO STATUS button, you change the mode. Note: • You can also change the mode by pressing the π† buttons. • You can also access the FRONT CONTROL PANEL screen by using the MENU button on the side of the TV instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST
JVC HD61Z786 | Instructions - Page 71
150 165 180 Sleep Timer Message 20 seconds before the automatic shutoff, this message will appear: GOOD NIGHT!! PUSH SLEEP TIMER BUTTON TO EXTEND You Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo mode even if a certain broadcast is in mono sound only. •
JVC HD61Z786 | Instructions - Page 72
Closed Caption Menu. • See page 51 when you set the caption/text mode. • You can also change the mode by pressing the π† buttons. • If you are in PC mode, C.C. can not be used CLOSED CAPTION OFF SMART CAPTION ON Channel +/- Use these buttons to move up or down all the available channels your TV is
JVC HD61Z786 | Instructions - Page 73
Button Functions Favorite The Favorite button allows you to select your favorite channels easily. First, you must register the channels that you like. See how to register below. Press the FAVORITE button The favorite channel list will appear. π† To select the channel you want to watch 101
JVC HD61Z786 | Instructions - Page 74
part of a 4:3 aspect picture, blowing it up to fill the 16:9 screen. REGULAR - The regular ratio is used when you want to watch a 4:3 broadcast or recorded program without modifying the original picture to fit the dimensions Ratios in PC Mode REGULAR - The is the original aspect mode. PANORAMA ZOOM
JVC HD61Z786 | Instructions - Page 75
PANEL CONTROL screen by using the MENU button on the side of the TV instead of the remote control. mode, Aspect can not be used. (HD-70G886 Only) Menu The MENU button allows you to access JVC's onscreen menu system. Press MENU to activate the onscreen menu system. • See individual topics like "Sound
JVC HD61Z786 | Instructions - Page 76
power off. Move the selector switch to DVD to operate. • The remote is preset with the code 000 to control JVC-brand DVD players. For any other manufacturer's brand DVD player, please see the code chart and instructions on page 35. Light All remote control buttons are illuminated, except for the TV
JVC HD61Z786 | Instructions - Page 77
enter The onscreen will appear Antenna Level Digital Sound Aspect Ratio Cable Card Application PCM 4:3 Notes: i.LINK Auto Play OFF Software Update • Software Update will only appear when the SD Card is inserted. Select BACK Operate Back MENU Exit • If you are watching an analog channel
JVC HD61Z786 | Instructions - Page 78
To enter To Aspect Ratio To select 4:3 or 16:9 Press the MENU button when finished Notes: • Set the mode to 4:3 or 16:9 before you record a program using the ATSC MONITOR OUT. • Make sure the mode you choose is the same as the TV's aspect ratio when the recorded program is played back, so that
JVC HD61Z786 | Instructions - Page 79
SETUP To enter To i.LINK Auto Play To select ON or OFF ON: Set to i.LINK input automatically OFF: Select the input manually Press the MENU button when finished Software Update At first, insert the SD(Multi-media) card into the memory card slot. This function will appear only when you insert an SD
JVC HD61Z786 | Instructions - Page 80
forth the analog and digital channels. Digital channels have a "D" in front of the channel number. Note: • If the cable card is inserted into the TV, you cannot use the D/A button. You can select a digital channel only. Press the D/A button To watch digital channels For example, to move to channel
JVC HD61Z786 | Instructions - Page 81
the i.LINK is not connected, the Controller OSD will not appear. The OSD of device on page 82 will appear. • Some controller operations may differ from your D-VHS VCR operations. Press the i.LINK MENU button i.LINK D-VHS1 STOP 00:00:00 Controller Device POWER √®π† To select the key you want
JVC HD61Z786 | Instructions - Page 82
device. π† i.LINK Controller Renumber Device Page 2/3 D-VHS1 JVC HM-DH30000U D-VHS2 JVC HM-DH40000U HD-MOVIE 1 JVC GR-HD1 To select your device connecting with i.LINK Press the OK button Notes: • If you do not select the device, you cannot use the i.LINK timer functions. • When one
JVC HD61Z786 | Instructions - Page 83
Sep. 18 (Wed) 35-1 PBPBPB Sep. 18 (Wed) 5:00PM - 6:00PM SeDtaTiliymer 8:00PM -C8a:n3c0ePlM Weekly † √® † √® † √® † √® † √® † √® † √® To Timer Mode To select Rec or View To Channel To select the channel you want to set the timer for To Date To select the date To Start Time To set the start time To
JVC HD61Z786 | Instructions - Page 84
When you want to confirm the timer you set or edited, or delete the timer setting, use this function. Timer Edition π† Press the TIMER button To select the timer list you want to edit Press the OK button Timer Timer Edit Sept. 10 (Wed) 4:55PM Timer Mode Rec Channel Page 13/35-1 0. NNeeww
JVC HD61Z786 | Instructions - Page 85
YES: Cancel the recording NO: Continue the recording Press the OK button Timer Sep. 10 (Wed) 4:55PM 0. New Reservation Page 1/1 V R Yes Guide You can view the program from the GUIDE. Notes: • The GUIDE function will only work when you are receiving digital programming only. • The GUIDE will
JVC HD61Z786 | Instructions - Page 86
TV can read the following media cards: - SD Card - MMC (Multi Media Card) - Memory Stick - xD-Picture Card - CF Card (Compact Flash Card) - Removable microdrive Hard Disk for JVC STICK Card COMPACT FLASH Metal Terminal xD SD (To the middle part) or MMC MS (To the lower part) Note: •
JVC HD61Z786 | Instructions - Page 87
the type of card you insert. • The sound from the media card can not be changed. • Onscreen language is linked to LANGUAGE in the Initial Setup Menu. • When the media card viewer function is used, the menu is not used. • The following message appears on the TV screen in the following cases: - When
JVC HD61Z786 | Instructions - Page 88
OK button. 0003 Illustration when a CF card is being used Rotation When you press the OK while you are viewing the slide show in PHOTO mode, the image is paused temporarily. Then press π† while the image is paused, and you can rotate the image. Note: • Although the image has changed because
JVC HD61Z786 | Instructions - Page 89
Media Card Viewer FILE √® Select FILE Press the OK button The following screen appears. FILE LIBRARY ... DVC00024 DVC00025 DVC00026 DVC00027 DVC00028 DVC00029 DVC00030 File Size Date 91KBytes 2005/01/01 FOLDER 100JVCGR CF 0000/0004 Illustration of CF file library π† Everytime a file is
JVC HD61Z786 | Instructions - Page 90
is being detected for that channel. Weak Signal 15 No Program If the TV channel you selected, or were watching is not receiving a signal, "NO burn-in. Note: • Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off functions that you set, are still active. Invalid Signal
JVC HD61Z786 | Instructions - Page 91
: • Please contact your local cable company regarding detailed information. Cable Card Connection CABLE CARD CABLE CARD ATSC /DIGITAL CABLE IN I TV Rear Panel Note for inserting Cable Card: • When you are watching a digital program, and if a weather or government emergency occurs, the following
JVC HD61Z786 | Instructions - Page 92
Troubleshooting PROBLEMS CHECK There is no power • See if the power cord became unplugged. • Check for a blown fuse or circuit breaker or a power outage. • It is possible the fan is stuck or the inside temperature is rising abnormally. Consult your dealer. The POWER LED and LAMP/PROGRAM LED are
JVC HD61Z786 | Instructions - Page 93
Troubleshooting PROBLEMS There is no sound from the TV's speaker Static electricity CHECK • The Center CH Input may be turned on. See page 58. • The TV Speaker option may be turned off. See page 57. • It is normal to feel static electricity if you brush or touch the screen. You hear
JVC HD61Z786 | Instructions - Page 94
of the lamp being shortened. The life of the lamp changes depending on the atmospheric temperature and altitude in which the TV is being used. Please read these instructions fully before attempting to replace the lamp. If you feel unsure about replacing the lamp yourself, call a service technician
JVC HD61Z786 | Instructions - Page 95
contains a small amount of mercury, it cannot be disposed of with normal trash. Lamp Message LAMP NEEDS TO BE REPLACED. REFER TO OWNER'S MANUAL FOR REPLACEMENT INSTRUCTIONS. AFTER REPLACING THE LAMP, PLEASE RESET TIMER IN THE TV MENU. PRESS OK, IF YOU DO NOT WANT TO SEE THIS MESSAGE AGAIN. If this
JVC HD61Z786 | Instructions - Page 96
to Replace the Lamp Please read these instructions fully before attempting to replace the lamp. If you feel unsure about replacing the lamp yourself, call a service technician. Please observe all safety warnings. 1) Turn off the television. Press the POWER button on the remote control or TV front
JVC HD61Z786 | Instructions - Page 97
securely in the TV (flat in the lamp housing area), it won't turn on. Make sure the lamp sits securely and flat in the housing area. WARNING! Remember it is very important that YOU DO NOT TOUCH THE LAMP SURFACE. Please read the warnings on page 94 again. Also, replace the lamp with part number TS
JVC HD61Z786 | Instructions - Page 98
and close the lamp cover. Because the lamp cover has a role to help prevent the danger of an electrical shock, tighten the screw using your fingers. 9) Re-install the left speaker panel. Replace the top part of the left speaker panel first. Fit the top part of the panel against the TV and gently
JVC HD61Z786 | Instructions - Page 99
to observe all warnings. Make sure the lamp sits FLAT inside the unit when you reinstall it. • If this condition occurs except for replacing the lamp: Keep the TV off for a while and then turn the power on again. If the TV goes into warning mode, unplug the TV after the cool down as completed and
JVC HD61Z786 | Instructions - Page 100
100
JVC HD61Z786 | Instructions - Page 101
101
JVC HD61Z786 | Instructions - Page 102
HD-61Z886 HD-61Z786 HD-70G886 HD-ILA Device Projection NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable VHF 2 to 13, UHF 14 to 69 CATV 135 Sub, Mid, Super, Hyper and Ultra bands (191 channel frequency synthesizer system) • Reception of channel A-5 ("95" of the TV
JVC HD61Z786 | Instructions - Page 103
Notes 103
JVC HD61Z786 | Instructions - Page 104
JVC COMPANY OF AMERICA Division of JVC Americas Corp. 1700 Valley Road Wayne, New Jersey, 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7