JVC HR-XVC27U Instruction Manual

JVC HR-XVC27U Manual

Get JVC HR-XVC27U PDF manuals and user guides View all JVC HR-XVC27U manuals
Add to My Manuals
Save this manual to your list of manuals

JVC HR-XVC27U manual content summary:

  • JVC HR-XVC27U | Instruction Manual - Page 1
    DVD PLAYER & VIDEO CASSETTE RECORDER HR-XVC27U INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No. LPT0893-001A
  • JVC HR-XVC27U | Instruction Manual - Page 2
    for purchasing the JVC DVD player & VHS video alert the user to the presence of important operating and maintenance (servicing) instructions in the JVC could void user's authority to operate the equipment. Declaration of Conformity Model Number: HR-XVC27U Trade Name: JVC Responsible Party: JVC
  • JVC HR-XVC27U | Instruction Manual - Page 3
    servicing. ATTENTION Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety, please read all the safety and operating instructions of the mast and supporting structure, grounding of unused for long periods of time, unplug it from the wall
  • JVC HR-XVC27U | Instruction Manual - Page 4
    or other hazards. 4. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in safe operating condition. HOW TO USE THIS INSTRUCTION MANUAL ● All major sections and subsections are listed in the
  • JVC HR-XVC27U | Instruction Manual - Page 5
    recording is not possible with this model. ● This model is equipped with SQPB (S-VHS QUASI moisture dry. ATTENTION To mobile phone users: Using a mobile phone in the When discarding batteries, environmental problems must be considered and the in damage to the unit, Remote or video cassette. 1. DO
  • JVC HR-XVC27U | Instruction Manual - Page 6
    With A Built-in DTS (DVD deck only 73 SUBSIDIARY SETTINGS 74 Mode Set (VCR deck 74 Mode Set (DVD deck 77 Child Lock 80 Scan Mode Set (DVD deck 80 TROUBLESHOOTING 81 QUESTIONS AND ANSWERS 86 SPECIFICATIONS 87 LIST OF TERMS 88 FOR SERVICING (Only in U.S.A.) 90 WARRANTY (Only
  • JVC HR-XVC27U | Instruction Manual - Page 7
    region number includes "1" can be played back such as shown below. Examples of DVD VIDEO labels which can be played back using this unit. Marks of discs in this instruction manual Allows operation with a DVD VIDEO disc. Allows operation with a Video CD disc. Allows operation with a disc including
  • JVC HR-XVC27U | Instruction Manual - Page 8
    it supports. Marks related to video Mark Description Number of subtitles DISC INFORMATION (cont.) File Structure of Discs DVD VIDEO Typically, DVD VIDEO is in Wide video mode (16:9) on wide televisions, but pan and scan is used on televisions with standard 4:3 aspect ratio (either the left or
  • JVC HR-XVC27U | Instruction Manual - Page 9
    Placing a Disc 1 Open the disc tray. Press OPEN/CLOSE (x) on the DVD deck to open the disc tray. x ● Pressing the button again closes the disc tray. ● Do not block the disc tray with your hand while it
  • JVC HR-XVC27U | Instruction Manual - Page 10
    Connectors (VIDEO/AUDIO) ੬ pg. 68 L Remote Sensor M Front Display Panel ੬ pg. 11 N Record Button (REC (7)) ੬ pg. 33 O Rewind Button (REW (3)) ੬ pg. 28, 29, 44 P Fast Forward Button (FF (5)) ੬ pg. 28, 29, 44 Q Channel Button (CH +/-) ੬ pg. 33 R Progressive Scan Button (PROGRESSIVE SCAN) ੬ pg. 80
  • JVC HR-XVC27U | Instruction Manual - Page 11
    /Clock Auxiliary Input Mode Display (F-1) (VCR deck only) Counter Display (VCR deck) Tape Speed (SP/EP) (VCR deck only) Multi-information window* (DVD deck) * The current group/title/track/chapter number(s), time and status information. C VCR Indicator ੬ pg. 34 D Progressive Mode Indicator ੬ pg. 80
  • JVC HR-XVC27U | Instruction Manual - Page 12
    VCR deck) If you press ON SCREEN on the Remote when "SUPERIMPOSE" is set to "ON" (੬ pg. 75), various operational indicators appear on the TV screen. For On-screen display for DVD appear correctly. D Index number ੬ pg. 30 E Tape Remaining Time Indicator ੬ pg. 35 F Counter Display G Audio Mode Display
  • JVC HR-XVC27U | Instruction Manual - Page 13
    +/-, MUTE) can also be used to operate a JVC's TV after setting the TV/VCR/ DVD switch to the left. A VCR Button ੬ pg. 28, 33 B TV/VCR/DVD switch ੬ pg. 18 C Menu Button (MENU) ੬ pg. 43 D SP/EP Button ੬ pg. 33 Top Menu Button (TOP MENU) ੬ pg. 43 E Stop Time Button (STOP +/-) ੬ pg. 36 On-Screen Button
  • JVC HR-XVC27U | Instruction Manual - Page 14
    AV connection, set the VCR channel to "- CH" (off). To set the VCR channel, perform the following steps: Before performing the following steps: ● Make sure there is no cassette inserted in the unit. ● Make sure the unit is turned on, then press VCR/ DVD on the unit or VCR on the Remote so that the
  • JVC HR-XVC27U | Instruction Manual - Page 15
    its AV mode. You can also use the TV/VCR button on the unit's Remote to set JVC TV to the AV mode. ● For switching the TV's mode, refer to the instruction manual of your television. ● Only DVD picture is output from S-VIDEO OUTPUT connector. (VCR picture is not output.) To S-VIDEO input connector
  • JVC HR-XVC27U | Instruction Manual - Page 16
    unit's Remote to set JVC TV to the AV mode. ● For switching the TV's mode, refer to the instruction manual of your television. ● By using the component video connection, you can view the images in the progressive mode. For switching to the progressive mode, refer to "Scan Mode Set (DVD deck)" (੬ pg
  • JVC HR-XVC27U | Instruction Manual - Page 17
    , however, you want to add or delete channels, refer to "Manual Channel Set" (੬ pg. 27). During Initial Auto Clock Set "AUTO" blinks. During Auto Channel Set The channel numbers are displayed as they are scanned and set. Plug&Play Completed The current time is displayed. * If an incorrect clock
  • JVC HR-XVC27U | Instruction Manual - Page 18
    on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Access the DVD Set Up menu screen. A Press SET UP. B Press w e to select " PICTURE". PICTURE MONITOR
  • JVC HR-XVC27U | Instruction Manual - Page 19
    * The default setting is bold in the table below. 8 MONITOR TYPE 16:9 (Wide television the left and right edges of the pictures will not be shown on the screen. EN 19 Pan&Scan/Letter Box In general, DVD VIDEO disc are produced for a wide-screen TV with 16:9 aspect ratio. Material with this ratio
  • JVC HR-XVC27U | Instruction Manual - Page 20
    on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Access the Main Menu screen. Press SET UP. D Access the Initial Set screen. Press rt to move the highlight bar
  • JVC HR-XVC27U | Instruction Manual - Page 21
    can change the language setting manually as required. A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Access the DVD Set Up menu screen. A Press
  • JVC HR-XVC27U | Instruction Manual - Page 22
    on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Access the DVD Set Up menu screen. A Press SET UP. B Press w e to select " LANGUAGE". LANGUAGE MENU
  • JVC HR-XVC27U | Instruction Manual - Page 23
    FI Finnish FJ Fiji FO Faroese FY Frisian GA Irish GD Scots Gaelic GL Galician GN Guarani GU Gujarati HA Hausa HI Hindi HR Croatian HU Hungarian HY Armenian IA Interlingua IE Interlingue IK Inupiak IN Indonesian IS Icelandic IW Hebrew JI Yiddish JW Javanese KA Georgian
  • JVC HR-XVC27U | Instruction Manual - Page 24
    on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Access the Main Menu screen. Press SET UP. D Access the Initial Set screen. Press rt to move the highlight bar
  • JVC HR-XVC27U | Instruction Manual - Page 25
    highlight bar to "D.S.T.", then press rt repeatedly until the desired setting is selected. AUTO: Select if you want to adjust your VCR's clock automatically by the incoming signal from the host channel. Be sure to select the correct time zone manually in step D. ON: Adjustment will be made by the
  • JVC HR-XVC27U | Instruction Manual - Page 26
    on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Access the Main Menu screen. Press SET UP. D Access the Tuner Set screen. Press rt to move the highlight bar
  • JVC HR-XVC27U | Instruction Manual - Page 27
    EN 27 Manual Channel Set You can add the channels you want or delete the channels you do not want manually. A Turn on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights
  • JVC HR-XVC27U | Instruction Manual - Page 28
    The unit's power comes on automatically and the counter is reset to 0:00:00. B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Find the program start point. If the tape is advanced past the
  • JVC HR-XVC27U | Instruction Manual - Page 29
    Features ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. CH +/- EN 29 Still Picture/Frame-By-Frame Playback 1 Pause during playback. Press PAUSE (9). ● If there is vertical jitter, press CH +/- on the Remote or on the unit to correct the picture
  • JVC HR-XVC27U | Instruction Manual - Page 30
    30 EN OPERATIONS ON VCR DECK (cont.) Index Search Your unit automatically marks index codes Once it's found, playback begins automatically. ● To watch the first of the 3 programs, press three times. The unit searches and begins playback automatically. You can access a program as far as 9 index
  • JVC HR-XVC27U | Instruction Manual - Page 31
    Tape Rewind Press REW (3), then press EJECT (x) within 2 seconds. Repeat Playback Your unit can automatically play back the whole tape 100 times repeatedly. 1 Start playback. Press PLAY (4). 2 Activate Repeat Playback. Press PLAY (4) and hold for over 5 seconds, then release. ● The Play indicator
  • JVC HR-XVC27U | Instruction Manual - Page 32
    VCR DECK (cont.) Manual Tracking Your unit is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the CH buttons. 1 Override automatic tracking. During playback, press SP/EP on the Remote on the Function Set screen. (੬ pg
  • JVC HR-XVC27U | Instruction Manual - Page 33
    . On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Choose a program. Press CH +/- or the number keys to select the channel you wish to record. D Set the tape speed. Press SP/EP. The current setting appears on the
  • JVC HR-XVC27U | Instruction Manual - Page 34
    /VCR. The VCR indicator on the front display panel and the TV broadcast being recorded disappear. Once recording is in progress, all you need to do is to set : You can also use the DVD deck in the following cases. Before use, be sure to turn on the unit and select the DVD deck. ● During recording ●
  • JVC HR-XVC27U | Instruction Manual - Page 35
    EN 35 Elapsed Recording Time Indication 1 Set the counter display. Press DISPLAY until a counter reading appears on the front display panel. 2 Reset the counter. Press C.RESET before starting recording or playback. ● The counter is reset to "0:00:00" and shows the exact elapsed time as the tape runs
  • JVC HR-XVC27U | Instruction Manual - Page 36
    unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. B Access the Program screen. Press PROG.. (If you're just starting out, "PROGRAM 1" appears.) C Enter the program start time. Press START +/- to enter the time you want
  • JVC HR-XVC27U | Instruction Manual - Page 37
    F Enter the channel position. Press CH +/-. G Set the tape speed. Press SP/EP. H Return to the normal ● Programs that start after midnight must have the next day's date. Cable Box or DBS Receiver Users To timer-record a satellite broadcast using Express Timer Programing: A Perform steps A - I. Enter
  • JVC HR-XVC27U | Instruction Manual - Page 38
    38 EN OPERATIONS ON VCR DECK (cont.) Check, cancel and change programs A Disengage the timer mode. Press TIMER, then press POWER (1). B Access the Program Check screen. Press PROG. CHECK. C Access the Program screen. Press PROG. CHECK again to check more information. Each time you press PROG. CHECK
  • JVC HR-XVC27U | Instruction Manual - Page 39
    change a program. Press CANCEL to cancel a program. To change program settings, press the appropriate button: START +/-, STOP +/-, DATE +/-, CH +/-, DAILY EP. E Return to the normal screen. Press PROG. CHECK as many times as necessary. If there are still some programs remaining, go on to step F.
  • JVC HR-XVC27U | Instruction Manual - Page 40
    40 EN OPERATIONS ON VCR DECK (cont.) When programs overlap each other If "PROGRAM overlapping programs. NOTE: If you do not mind this overlap, press PROG. to finish the timer program setting. The program with the lower program number will be recorded and the other one will not be recorded correctly
  • JVC HR-XVC27U | Instruction Manual - Page 41
    the same time. Before VCR/DVD switch to the right. A Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. B Set progress. ● For timer programing of the DBS receiver, refer to the instruction manual
  • JVC HR-XVC27U | Instruction Manual - Page 42
    disc present on the disc tray. B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Start playback. Press PLAY (4). Example: DVD VIDEO Title number Chapter number ATTENTION ● You can not
  • JVC HR-XVC27U | Instruction Manual - Page 43
    menu ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. Playback Control (PBC) Function - Locating a desired scene using the menu of the Video CD with PBC Some Video CD discs supports the PBC function. PBC is an abbreviation of "PlayBack Control
  • JVC HR-XVC27U | Instruction Manual - Page 44
    44 EN OPERATIONS ON DVD DECK (cont.) Locating the start point of the item or skip the FF (5) for forward variable speed search, or REW (3) for reverse variable speed search. ● The more times you press, the faster the playback picture moves. ● To resume normal playback, press PLAY (4). OR During
  • JVC HR-XVC27U | Instruction Manual - Page 45
    PLAY (4). NOTES: ● Reverse slow motion playback is possible only with the DVD VIDEO discs. ● This function may not works for some Video CD the position where you stop playback and resume playback from that position. ● Be sure to set "RESUME" to "ON". (੬ pg. 80) 1 Memorize the resume point. Press
  • JVC HR-XVC27U | Instruction Manual - Page 46
    46 EN OPERATIONS ON DVD DECK (cont.) ● Each time you press 3D-PHONIC, the setting changes as follows: OFF]ACTION]DRAMA] you cannot get any effect if you activate 3D Phonic function. ● When playing back a DVD VIDEO disc recorded with the Dolby Digital that does not contain the rear signal, you
  • JVC HR-XVC27U | Instruction Manual - Page 47
    that affect picture appearance and store settings. Go to step 3. NOTE: You cannot adjust the parameters of "NORMAL" and "CINEMA". To adjust picture appearance manually 3 Access USER menu. Press w e repeatedly to select "USER 1" or "USER 2". USER 1 GAMMA 0 BRIGHTNESS 0 CONTRAST 0 SATURATION
  • JVC HR-XVC27U | Instruction Manual - Page 48
    Video CD A Disc type B Current transfer rate (Megabits per second) C Current title (for DVD) D Current chapter number (for DVD) or track number (for other type of discs) E Time information (੬ pg. 49) F Playback status : appears during playback. / : appears during fast forward/reverse. / : appears
  • JVC HR-XVC27U | Instruction Manual - Page 49
    the selected item. ● The current setting appears. EN 49 Change the time information You can change the time information in the on-screen bar to , then press ENTER. ● Each time you press ENTER, the time information changes as follows; Example: During DVD playback C Select the option. Press
  • JVC HR-XVC27U | Instruction Manual - Page 50
    B Select menu item. Press w e to move the hightlight to , then press ENTER. ● The following pop-up window appears under the selected item. OPERATIONS ON DVD DECK (cont.) C Select the repeat mode. Press rt repeatedly to select the Repeat mode, then press ENTER. ● The mode changes as follows
  • JVC HR-XVC27U | Instruction Manual - Page 51
    used. ● The subtitles recorded around A-B point may not appear. ● The end of the item will be set as "B" point if the end of the item reached before you set the "B" point. ● When playing back a DVD, A-B Repeat Playback is possible only within the same title. ● "A-B" cannot be selected while stopped.
  • JVC HR-XVC27U | Instruction Manual - Page 52
    NOTES: ● When "X" is displayed on the TV screen in step C, you have selected a point that excesses the recording time of the disc. ● Some DVD VIDEO discs do not contain time information, and it is no possible to use the Time Search function. In such a case, "X" is displayed on the TV screen as well
  • JVC HR-XVC27U | Instruction Manual - Page 53
    Chapter Search EN 53 You can start playback the desired chapter using the on-screen bar. A Access the on-screen bar. Press ON SCREEN twice. The on-screen bar appears on the TV screen. B Select menu item. Press w e to move the hightlight to , then press ENTER. ● The following pop-up window
  • JVC HR-XVC27U | Instruction Manual - Page 54
    54 EN OPERATIONS ON DVD DECK (cont.) C Select the subtitle language. Press rt repeatedly to select the desired subtitle language, then press ENTER. ● Each time you press the button, the subtitle language changes. To clear the on-screen bar Press ON SCREEN. NOTES: ● It is impossible to select "OFF"
  • JVC HR-XVC27U | Instruction Manual - Page 55
    DVD VIDEO disc contains "multi-angle" parts, where multiple cameras were used to shoot the same scene from different angles. If the disc contains "multi-angle" parts, " " appears on the TV screen at the beginning of the "multi-angle" part when "ON SCREEN GUIDE" is set ● Each time you press the
  • JVC HR-XVC27U | Instruction Manual - Page 56
    language of movies (DVD VIDEO). ● During playback When using the on-screen bar A Access the on-screen bar. Press ON SCREEN twice. The on-screen bar appears on the TV screen. B Select the audio language. Press rt or A.MONITOR repeatedly to select the desired audio language. ● Each time you press the
  • JVC HR-XVC27U | Instruction Manual - Page 57
    selected item. Example: "ST" (stereo) is selected. C Select the audio channel. Press rt repeatedly to select the desired audio channel, then press ENTER. ● Each time you press the button, the audio channel changes. To clear the on-screen bar Press ON SCREEN. EN 57 When using the A.MONITOR button
  • JVC HR-XVC27U | Instruction Manual - Page 58
    mode). ● Slide the TV/VCR/DVD switch to the right. To set Parental Lock for the first time A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. OPERATIONS ON
  • JVC HR-XVC27U | Instruction Manual - Page 59
    the level. Otherwise, the new country code and/ or the level will not become effective. F Return to the normal screen. Press SET UP. NOTES: ● When you enter the wrong password more than 3 times in step B on the left column, the highlight moves to "EXIT" automatically and rt does not work. ● If you
  • JVC HR-XVC27U | Instruction Manual - Page 60
    EN Country/Area Code List for Parental Lock OPERATIONS ON DVD DECK (cont.) AD Andorra AE United Arab Emirates -Bissau GY Guyana HK Hong Kong HM Heard Island and McDonald Islands HN Honduras HR Croatia HT Haiti HU Hungary ID Indonesia IE Ireland IL Israel IN India IO
  • JVC HR-XVC27U | Instruction Manual - Page 61
    LC Saint Lucia LI Liechtenstein LK Sri Lanka LR Liberia LS Lesotho LT Lithuania LU Luxembourg LV Latvia LY Libyan Arab Jamahiriya MA Morocco MC Monaco MD Moldova, Republic of MG Madagascar MH Marshall Islands ML Mali MM Myanmar MN Mongolia MO Macau MP Northern
  • JVC HR-XVC27U | Instruction Manual - Page 62
    (we refer to those discs as MP3 discs in this manual). Operations for MP3 discs are similar to those for Audio CD DVD DECK (cont.) NOTES: ● Because of the disc characteristics or recording condition, some discs may not be played back or it takes time to start playback. ● The unit does not support
  • JVC HR-XVC27U | Instruction Manual - Page 63
    control display A Turn on the unit. Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Select the mode. Be sure to set "FILE TYPE" to "AUDIO" before loading a disc. (੬ pg. 78
  • JVC HR-XVC27U | Instruction Manual - Page 64
    64 EN OPERATIONS ON DVD DECK (cont.) Repeat Playback You can repeat playback of the current group, track or all groups. ● While MP3 control display is on the TV: A Select the mode. Press REPEAT to select the desired repeat mode. ● Each time you press REPEAT, the mode changes as follows: TRACK]
  • JVC HR-XVC27U | Instruction Manual - Page 65
    those discs as JPEG discs in this manual). Operations for JPEG discs are similar to 640 x 480, it will take a longer time to be displayed.) ● This unit supports the JPEG files whose resolution is 32 to : Used for digital cameras, web, etc. Progressive JPEG format: Used for web. Lossless JPEG format
  • JVC HR-XVC27U | Instruction Manual - Page 66
    DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Select the mode. Be sure to set ENTER to show the selected file. ● The playback interval time of slide-show depends on the file size. G Pause playback
  • JVC HR-XVC27U | Instruction Manual - Page 67
    group, file or all groups. ● While JPEG control display is on the TV: A Select the mode. Press REPEAT to select the desired repeat mode. ● Each time you press REPEAT, the mode changes as follows: GROUP]ALL]OFF (No indication)](Back to the beginning) GROUP: ALL: OFF (No indication): All files of
  • JVC HR-XVC27U | Instruction Manual - Page 68
    Player EDITING (VCR DECK) You can use a camcorder as the source player and your unit as the recording deck. Slide the TV/VCR/DVD Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Set the
  • JVC HR-XVC27U | Instruction Manual - Page 69
    lights up. On the Remote Press VCR so that the VCR indicator lights up. C Set the input mode of recording deck. With this video unit, press AUX (number key "0") and/or CH to select "F-1". ● When using another recorder as the recording deck, refer to its instruction manual. D Set the edit mode. See
  • JVC HR-XVC27U | Instruction Manual - Page 70
    lights up on the unit. NOTES: ● You can dub from DVD to VCR regardless of the scan mode setting. (੬ pg. 80) However, the progressive signals will be converted to the interlace signals when dubbing. ● Set "ON SCREEN GUIDE" to "OFF" (੬ pg. 80) if you do not want to record the on-screen display
  • JVC HR-XVC27U | Instruction Manual - Page 71
    VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. Recorder Digital audio device (MD deck etc.) Coaxial cable (not supplied) Player Rear of unit DIGITAL AUDIO OUT EN 71 You can dub selected audio from the DVD DVD deck A Press OPEN/CLOSE (x) on the DVD deck the DVD deck DVD deck
  • JVC HR-XVC27U | Instruction Manual - Page 72
    following steps: Slide the TV/VCR/DVD switch to the right. REMOTE On the Remote Keep pressing VCR down during steps A - B. A Change the remote control code. Press the number key "1" for A, "2" for B, "3" for C or "4" for D. B Set the remote control code. Press ENTER to set the code. NOTE: Once the
  • JVC HR-XVC27U | Instruction Manual - Page 73
    or An Amplifier With A Built-in DTS (DVD deck only) These instructions enable you to connect your unit to dolby digital built-in DTS. NOTES: ● For Dolby digital sound, set "DIGITAL AUDIO OUTPUT" to "DOLBY DIGITAL/PCM". (੬ pg. 78) ● For DTS sound, set "DIGITAL AUDIO OUTPUT" to "STREAM/ PCM". (੬ pg
  • JVC HR-XVC27U | Instruction Manual - Page 74
    on the unit. Press POWER (1). B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Access the Main Menu screen. Press SET UP. D Access the Function Set screen. Press rt to move the highlight
  • JVC HR-XVC27U | Instruction Manual - Page 75
    20) NOTES: ● When you use this unit as the source player for editing, be sure to set "SUPERIMPOSE" to "OFF" before starting. ● During playback, the tape if you set "AUTO SP]EP TIMER" to "ON". In this case, make sure the mode is not engaged, then set the tape speed manually during timer programing
  • JVC HR-XVC27U | Instruction Manual - Page 76
    is recorded on both the Hi-Fi and normal tracks. ● When this function is set to "OFF", the SAP audio cannot be recorded. NOTES: When the channel is of this setting. ● You can also use the A.MONITOR button on the Remote to select the desired monitor sound. (੬ pg. 32) When this function is set to "
  • JVC HR-XVC27U | Instruction Manual - Page 77
    Press POWER (1). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator lights up. C Access the DVD Set Up menu screen. A Press SET UP. B Press w e to select " OTHERS". ● Each time you press the button
  • JVC HR-XVC27U | Instruction Manual - Page 78
    TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. For more details, refer to "Monitor Set (DVD deck)" (੬ pg. 18) You be burned out if a static picture is displayed for a long time. When this function is set to "ON", the unit automatically activates the screen saver function if
  • JVC HR-XVC27U | Instruction Manual - Page 79
    signals) of the sound when listening to the sound at a low volume or at night. This function is available with DVD VIDEO discs recorded with the Dolby Digital format. Set to the appropriate mode according to the number of channels recorded. AUTO: ON: Audio is played back with channels other than
  • JVC HR-XVC27U | Instruction Manual - Page 80
    system (eg. 480i*). If your TV equipped with component video connectors supports the progressive video input, you can enjoy a high quality picture by setting the progressive scan mode to active. ● Refer also to the instruction manuals supplied with your TV. ● If your TV equipped with component video
  • JVC HR-XVC27U | Instruction Manual - Page 81
    Remote Press VCR so that the VCR indicator lights up. If you are using the RF connection, - set the TV receiver to the VCR channel. - perform "Set the VCR channel." (੬ pg. 14). If you are using the AV or S-VIDEO*, Component Video* connection, set the TV to its AV mode. * (DVD deck only) Try manual
  • JVC HR-XVC27U | Instruction Manual - Page 82
    is set to off. ● A-B Repeat Playback is in progress. (੬ pg. 51) 9. Angle cannot be changed. ● The scene is not recorded from the multiple angles. CORRECTIVE ACTION - On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the Remote Press DVD so that the DVD indicator
  • JVC HR-XVC27U | Instruction Manual - Page 83
    DVD setting is set set "FILE TYPE" to "AUDIO" to play MP3 files. (੬ pg. 78) Replace the disc. (੬ pg. 9) JPEG Playback (DVD setting is set to "AUDIO". When both MP3 files and JPEG files are recorded to a disc, set "FILE TYPE" to "STILL PICTURE" to play JPEG files. (੬ pg. 78) RECORDING (VCR Set Set Set
  • JVC HR-XVC27U | Instruction Manual - Page 84
    84 EN TROUBLESHOOTING (cont.) TIMER RECORDING (VCR deck) SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. Timer recording won't work. ● The clock and/or the timer have been set Re-perform the clock and/or timer incorrectly. settings. ● The timer is not engaged. Press TIMER and confirm that "#"
  • JVC HR-XVC27U | Instruction Manual - Page 85
    is in progress. Press PAUSE (9) to pause the recording, change channels, then press PLAY (4) to resume recording. 5. Channel settings that were made manually seem to have changed or disappeared. ● After the manual settings were made, Auto Channel Set was performed. Perform manual setting again
  • JVC HR-XVC27U | Instruction Manual - Page 86
    together. QUESTIONS AND ANSWERS TIMER RECORDING Q. "⅜" and "#" remain lit on the front display panel. Is there a problem? A. No. This is a normal condition for a timer recording in progress. Q. Can I program the timer while I'm watching a tape or a TV broadcast? A. You won't see the picture as
  • JVC HR-XVC27U | Instruction Manual - Page 87
    (VCR deck) Signal system : NTSC color signal and EIA monochrome signal, 525 lines/60 fields Recording system : DA4 (Double Azimuth) head helical scan system / 8 programs Memory backup time : Approx. 5 seconds ACCESSORIES Provided accessories : RF cable, Infrared remote control unit, "AA"
  • JVC HR-XVC27U | Instruction Manual - Page 88
    Set 25 Manual Tracking 32 Mode Set (DVD deck) AUDIO LANGUAGE 22 D. RANGE COMPRESSION 79 DIGITAL AUDIO OUT 78 DOWN MIX 79 FILE TYPE 78 MENU LANGUAGE 22 MONITOR TYPE 19, 78 ON SCREEN GUIDE 80 ON SCREEN LANGUAGE 21 PICTURE SOURCE 78 RESUME 80 SCREEN SAVER 78 SUBTITLE 22 Mode Set (VCR
  • JVC HR-XVC27U | Instruction Manual - Page 89
    P Pan&Scan 19 Parental Lock Country/Area Code List 60 To change the settings 59 To set Parental Lock for the first time 58 To temporarily release the Parental Lock 59 Playback (DVD deck 42 - 61 Playback (JPEG 66 - 67 Playback (MP3 63 - 64 Playback (VCR deck 28 - 32 Playback Control (PBC)
  • JVC HR-XVC27U | Instruction Manual - Page 90
    90 EN FOR SERVICING (Only in U.S.A.) Authorized Service Centers QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1 (800) 252-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating
  • JVC HR-XVC27U | Instruction Manual - Page 91
    carefully, preferably in the original carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be given to you by the toll-free number. If you have any questions concerning
  • JVC HR-XVC27U | Instruction Manual - Page 92
    EN HR-XVC27U COPYRIGHT© 2004 VICTOR COMPANY OF JAPAN, LTD. Printed in China US/UC 0104CSH-ID-BJ
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
DVD PLAYER &
VIDEO CASSETTE RECORDER
INSTRUCTIONS
LPT0893-001A
HR-XVC27U
For Customer Use:
Enter below the Model No. and
Serial No. which are located on the
rear of cabinet. Retain this
information for future reference.
Model No.
Serial No.