JVC HR-XVS44U Supplementary Material - Page 82
Analog Down Mix, D. Range Control, Output Level
View all JVC HR-XVS44U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
82 EN 8 ANALOG DOWN MIX DOLBY SURROUND STEREO 8 D. RANGE CONTROL WIDE RANGE NORMAL TV MODE 8 OUTPUT LEVEL STANDARD LOW SUBSIDIARY SETTINGS (cont.) Set to the appropriate mode according to your audio system when you play back a DVD VIDEO disc recorded with surround multichannel audio. This setting affects only the analogue audio output signal from the AUDIO OUTPUT connectors (DVD) when playing back a DVD VIDEO disc recorded with surround multichannel audio. DOLBY SURROUND: STEREO: Select this when you enjoy multichannel surround audio by connecting the unit's analogue AUDIO OUTPUT connector (DVD) to a surround decoder or an internal amplifier. Select this when you enjoy conventional 2-channel stereo audio by connecting the unit's analogue AUDIO OUTPUT connectors (DVD) to a stereo amplifier/receiver or TV, or when you dub audio of a DVD VIDEO disc recorded with surround audio to your MD, cassette, etc. NOTE: The "ANALOG DOWN MIX" function does not work when the 3D Phonic function is activated. (੬ pg. 46) The dynamic range (the difference between the loudest sound and the quietest one) can be compressed during playback of a program encoded in Dolby Digital format. This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume. WIDE RANGE: Select this to inactivate this function when you enjoy wide dynamic range program. NORMAL: TV MODE: Normally select this setting to activate this function. Select this when you hear the sound through the TV's speaker(s). NOTES: ● This function works only when playing back a disc recorded with Dolby Digital format. The setting is not effective for other discs. ● This function does not work when the 3D Phonic function is activated. (੬ pg. 46) You can lower the output level of analog audio to accommodate the unit to the connected A/V equipment. STANDARD: Normally select this. LOW: The output level of analog audio is lowered.