Jenn-Air JUR248RWES Dimension Guide

PRODUCT MODEL NUMBERS

CUSTOM OVERLAY PANEL DIMENSIONS

LOCATION REQUIREMENTS

JUR248L

JUR248R

Electrical:

A 115 Volt, 60 Hz., AC only 15 or 20

amp fused (or circuit breaker), grounded electrical

supply is required. It is recommended that a

separate circuit serving only your refrigerator be

provided. Use an outlet that cannot be turned off

by a switch. Do not use an extension cord.

Because Whirlpool Corporation policy includes a continuous commitment to improve

our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only.

For complete details, see Installation

Instructions packed with product.

Specifications subject to change without notice.

Ref. 2300279B

08/19/09

If your refrigerator is to be built-in, to ensure proper ventilation for

your refrigerator, allow for 1/4" in. (6.35 mm) space on each side and

at the top. When installing your refrigerator next to a fixed wall and the

hinge side is next to the wall, leave 2-1/2" (6.35 cm) minimum to allow

for the door to swing open. To open door wider, leave more space.

NOTE:

Do not install the refrigerator near an oven, radiator, or other

heat source, nor in a location where the temperature will fall below

55°F (13°C). For best performance, do not install the refrigerator

behind a cabinet door or block the base grille.

Compact Refrigerator

¹⁄₄

" (6.35 mm)

2

¹⁄₂

" (6.35 cm)

If you plan to install a custom overlay panel, you will need to create the panel yourself or

consult a qualified cabinetmaker or carpenter. See dimension drawings for panel specifications.

IMPORTANT:

■

The thickness of the wood overlay must be

3

±

4

" (1.91 cm).

■

Overlay panel must not weigh more than 20 lbs (9.07 kg).

■

Overlay panel weighing more than recommended may cause damage to your refrigerator.

Overlay Panel - Rear View