Kenwood DNX690HD Quick Start Guide - Page 28
Connecting wires to terminals
View all Kenwood DNX690HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Quick Start Guide Connecting wires to terminals Fuse (10A) Fuse (10A) Ignition key switch ACC Accessory 1 Red (Ignition wire) Yellow (Battery wire) Car fuse box (Main fuse) Car fuse box AA Black (Ground wire) (To car chassis) Battery Light Blue/Yellow (Steering remote control wire) To steering remote To use the steering wheel remote control feature, you need an exclusive REMOTE CONT STEERING WHEEL REMOTE INPUT remote adapter (not supplied) matched to your car. Orange/White (Dimmer control wire) To car light control switch ILLUMI Connect to the terminal that is grounded when either the telephone rings or during conversation. To use the Mute feature, you need to hook up this wire to your telephone by using a commercial telephone accessory. Brown (Mute control wire) MUTE Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. (Max. 300mA, 12V) When using the optional power amplifier, connect to its power control terminal. Blue (Antenna control wire) ANT CONT Blue/White (Power control wire) P. CONT White/Black + White Gray/Black + Gray Green/Black + Green To front left speaker To front right speaker To rear left speaker Purple/Black Purple + To rear right speaker Speaker impedance: 4-8 Ω If no connections are made, do not let the cable come out from the tab. 28