Kenwood KDC-BT742U Instruction Manual
Kenwood KDC-BT742U - Radio / CD Manual
UPC - 019048182166
View all Kenwood KDC-BT742U manuals
Add to My Manuals
Save this manual to your list of manuals |
Kenwood KDC-BT742U manual content summary:
- Kenwood KDC-BT742U | Instruction Manual - Page 1
X493 KDC-MP442U CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D'EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best - Kenwood KDC-BT742U | Instruction Manual - Page 2
18 Activating Security Code Deactivating Security Code Manual Clock Adjustment AMP Control Demonstration mode setting Audio Adjustments 20 Audio Control Adjusting the detail of Audio Control Audio Setup Speaker Setting Audio Preset Memory Audio Preset Recall 2 | KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 3
(page 19). How to reset your unit • If this unit or the connected unit (disc auto changer, etc.) fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. Reset button Cleaning the Unit If the faceplate of - Kenwood KDC-BT742U | Instruction Manual - Page 4
Tuner ("TUNER") , USB or iPod ("USB" or "iPod"), CD ("CD") , Auxiliary input ("AUX"), and Standby ("STANDBY") each time this button is pressed. Press setting made in "MENU" > "AUX" of (page 6). 4 | KDC-BT742U/ KDC-X493/ KDC-MP442U Faceplate release: Release Releases the faceplate - Kenwood KDC-BT742U | Instruction Manual - Page 5
stations the "ST" indicator is ON. Tuning mode select: [AUTO] • For KDC-X493/MP442U: Switches as follows each time this button is pressed. • For KDC-BT742U: Switches as follows each time this button is pressed for at least 1 second. Tuning mode Display Operation Auto seek "SEEK : AUTO1 - Kenwood KDC-BT742U | Instruction Manual - Page 6
Control.Recalling 25 the sound setup registered by . "MEMORY" Registering the value setup by Sound Control. 25 "DSP BYPASS"/ "DSP THROUGH"* Setting "BYPASS" passes the DSP function. - Setting "THROUGH" activates the DSP function. 6 | KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 7
LINE" "AMP" *Factory setting * Function of KDC-BT742U. * Function of KDC-X493. * Function of KDC-MP442U. * iPod play mode cannot be set when is set to "OFF". * Refer to (page 38). Setting Entry Setting overview 1 sec. Sets/Resets security code. Condition Page 18 - Kenwood KDC-BT742U | Instruction Manual - Page 8
"ON"* Turns ON / OFF the tag memory function of HD Radio. 34 "ESN=" "NAME SET" "SCROLL" "FAV DELETE" "AUX" "CD READ" "AUDIO PRESET DEMO MODE" Displays the Electronic Serial Number of satellite radio. - "AUTO"*/ "MANUAL" 1 sec. Sets the display when switched to AUX source. Specifies whether - Kenwood KDC-BT742U | Instruction Manual - Page 9
] knob. Press the [AUD] knob. Press the [SEARCH] button. Repeat selection and determination until your desired setup item is selected. Example: MENU DOT LINE In this manual, the above selection is indicated as Select "MENU" > "DOT LINE". 3 Make a setting Press the [AUD] knob or turn the [AUD] knob - Kenwood KDC-BT742U | Instruction Manual - Page 10
" In HD Radio source Switching Display mode Press the [38] button for at least mode of LX-AMP is displayed. (KDC-X493 only) • When selecting "FOLDER NAME" while playing with iPod, names will be displayed depending on currently selected browsing items. • If the iPod Control by Hand Mode is set - Kenwood KDC-BT742U | Instruction Manual - Page 11
setting item during Menu mode (In AUX mode) Select the "NAME SET" display. For how to select Function Control items, refer to (page 6). 2 Enter Auxiliary input display setting mode VIDEO"/ "TV" 4 Exit Auxiliary input display setting mode Press the [SEARCH] button Internal CD source - Kenwood KDC-BT742U | Instruction Manual - Page 12
button for at least 1 second. 12 | KDC-BT742U/ KDC-X493/ KDC-MP442U ⁄ • *1 Skip Search: The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected now. Set played at random. Enter All random mode Select "PLAY MODE" > "ALL RDM". For how - Kenwood KDC-BT742U | Instruction Manual - Page 13
on the remote control. 2 Search the music Press the [4] or [¢] button. Cancelling Direct Music Search Press the [38] button. ⁄ • Direct Music Search cannot be performed during playing of iPod, Random play, or scan play. Basic Operation of Disc Changer (Optional) Selecting CD changer source Press - Kenwood KDC-BT742U | Instruction Manual - Page 14
: Desired frequency 92.1 MHz (FM) 810 kHz (AM) Press button [0], [9], [2], [1] [0], [8], [1], [0] Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control. ⁄ • You can enter the FM band frequency in steps of a minimum of 0.1 MHz. 14 | KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 15
29). • "BT" indicator is lit when a cell-phone is connected to this unit. Receiving a call Answering a Phone Call Press the [AUD] button. ⁄ • The following operations disconnect the line: - Insert a CD. - Connect a USB device. • The name of the calling party is displayed if it has already been - Kenwood KDC-BT742U | Instruction Manual - Page 16
button on the remote controller. 4 Make a call Press the [DIRECT] button on the remote controller. To erase the entered phone number digit by digit: Press the [4] button on the remote mode Press the [SEARCH] button. 4 Select the number you want to recall from the memory 16 | KDC-BT742U/ KDC-X493/ KDC - Kenwood KDC-BT742U | Instruction Manual - Page 17
, and the missed call list are the lists of calls originated from and received at this unit. They are not the ones stored in the cell-phone 1 second. Exit the Preset Memory mode Press the [SEARCH] button. Make a voice dialing call 1 Enter voice recognize mode Select "MENU" > "VOICE RECOG". For how - Kenwood KDC-BT742U | Instruction Manual - Page 18
. 4 Press the [AUD] knob for at least 3 seconds. "CLEAR" is displayed. The Security Code function deactivates. 5 Exit Security Code mode Press the [SEARCH] button. ⁄ • If a wrong security code is entered, "ERROR" is displayed. Enter a correct security code. 18 | KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 19
for at least 2 seconds. Pressing this button for 2 seconds or longer toggles the setting between "ON" and "OFF". Function of KDC-X493 When LX AMP unit connecting AMP Control You can control the LX AMP connected to the unit. 1 Select AMP Control item during Menu mode Select the "AMS CONTROL" display - Kenwood KDC-BT742U | Instruction Manual - Page 20
control mode) * Function of KDC-X493/MP442U. ⁄ • Source tone memory: You can set Bass, Middle, and Treble for each source. • "USER": The ranges selected lastly for Bass level, Middle level, and Treble level are recalled automatically. 1 Select the source to adjust Press the [SRC] button. 2 Enter - Kenwood KDC-BT742U | Instruction Manual - Page 21
4 Adjust the Audio setup item Turn the [AUD] knob. 5 Exit Audio Setup mode Press the [AUD] knob for at least 1 second. Function of KDC-X493/MP442U Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Speaker type OFF For 5 & 4 in. speaker For - Kenwood KDC-BT742U | Instruction Manual - Page 22
mode Press the [SERACH] button twice. ⁄ • The User memory of "SYSTEM Q" in (page 20) is changed to the value which was recalled. • The source tone memory item of (page 20) is changed to the value which was recalled by the selected source. 22 | KDC-BT742U/ KDC-X493 - Kenwood KDC-BT742U | Instruction Manual - Page 23
Function of KDC-BT742U Audio Adjustments (DSP) Cabin selection You can the center when the desired item is displayed. 4 Exit Speaker Setting mode Press the [SEARCH] button. DTA (Digital Time Alignment) setting Adjusting fine tuning of the speaker position compensation value specified at < - Kenwood KDC-BT742U | Instruction Manual - Page 24
/ 1.6k/ 2.5k Hz "BAND3" 4/ 6.3/ 10/ 16 kHz 24 | KDC-BT742U/ KDC-X493/ KDC-MP442U 1 Enter Equalizer Control mode Select "DSP" > "CONTROL" > "EQ". For how to select Function Control item, refer to (page 6). 2 Select the item you want to set Turn the [AUD] knob and push the center - Kenwood KDC-BT742U | Instruction Manual - Page 25
Exit Audio Preset Memory mode Press the [SEARCH] button. ⁄ • Register 6 pairs of Audio Preset Memory. • "USER 1": When you press the Reset, all the sources will be the setting value which is registered. • "USER 1", "USER 2": The memory cannot be erased by the Reset button. • This function cannot be - Kenwood KDC-BT742U | Instruction Manual - Page 26
etc. 1 Select a desired source to register and setting item. Source Setting Item TUNER/SIRIUS/XM/HD Preset Memory iPod List selection screen for Playlists/ Artists knob. "COMPLETE" is displayed. 4 Exit Preset Memory Delete mode Press the [SEARCH] button. 26 | KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 27
to Preset Memory registered to Favorite. 1 Enter Preset Recall mode Press the [FAVORITE] button. 2 Retrieve the Preset Memory to change. Turn the [AUD] knob. 3 Enter Name set mode Press the [AUD] knob for at least 1 second. Select the "NAME SET" display. 4 Enter the name Operation type Move the - Kenwood KDC-BT742U | Instruction Manual - Page 28
. 5 Return to the device list Press the [AUD] knob. 6 Exit Bluetooth device registration mode Press the [SEARCH] button. 28 | KDC-BT742U/ KDC-X493/ KDC-MP442U ⁄ • This unit allows up to eight digits to be input for a PIN code. If a PIN code cannot be input from this unit, it can be input from the - Kenwood KDC-BT742U | Instruction Manual - Page 29
Bluetooth connection. ⁄ • Setting on the cell-phone may be required. • If no phone book data is found in the unit even after the compete display, your cell-phone may not support automatic download of phone book data. In this case, try downloading manually. To download from the cell-phone manually - Kenwood KDC-BT742U | Instruction Manual - Page 30
Control> (page 6). The firmware version appears. 2 Exit Bluetooth Firmware update mode Press the [SEARCH] button. ⁄ • For how to update the firmware, access our website. http://www.kenwood.com/bt/information/ 30 | KDC-BT742U/ KDC-X493/ KDC-MP442U Adding a voice dialing command Add a voice tag to - Kenwood KDC-BT742U | Instruction Manual - Page 31
the [SEARCH] button. ⁄ • Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phonebook may not be recalled by voice command. SMS (Short Message Service) The SMS arrived at the cell-phone is displayed on the receiver. A newly arrived message - Kenwood KDC-BT742U | Instruction Manual - Page 32
service provider if "CALL ... TO SUBSCRIBE" appears. • The radio may take a little time to start receiving after you select the Satellite Radio source. • If the signal reception fails, "ACQUIRING SIGNAL"/ "NO SIGNAL" appears. Switching Seek Mode For KDC-X493/MP442U: Press the [AUTO] button. For KDC - Kenwood KDC-BT742U | Instruction Manual - Page 33
Press the [DIRECT] button on the remote control. ⁄ • If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. • If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, "ACQUIRING SIGNAL"/ "NO - Kenwood KDC-BT742U | Instruction Manual - Page 34
Apple iTunes Music Store. 1 Enter HD Radio tagging mode Press the [38] button. "TAG" will be indicated on the display when song information can be registered. ⁄ • Turn "ON" the "MENU" > "TAGGING" of - Kenwood KDC-BT742U | Instruction Manual - Page 35
[4] button Make a call [DIRECT] Receiving a call Answer the call [ ] Switch between the private talk mode and the hands-free talk mode [38] ¤ CAUTION • Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation may result. • Do not set the remote - Kenwood KDC-BT742U | Instruction Manual - Page 36
Playable Audio file MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • Playable USB device USB mass storage class • Playable USB device file system FAT16, FAT32 Although the audio files are complied with - Kenwood KDC-BT742U | Instruction Manual - Page 37
kenwood.com/bt/information/ ⁄ • The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Standard following the procedure prescribed by Bluetooth SEARCH] button. For how to operate Menu, refer to in this instruction manual. - Kenwood KDC-BT742U | Instruction Manual - Page 38
set to "1". 1 : Automatically distinguishes between audio file disc and music CD when playing disc. 2 : Forces playing as music CD. • DISPLAY If this unit is not operated at least 5 seconds with "OFF" selected, the display turns off. During a setup mode Bluetooth KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 39
not clear. Setting to "+" increases the noise reduction. • RECEIVE MODE (Receive mode Setting) Sets the receive mode of the HD Radio. Auto: voice in the compressed audio files and CD-DA music to produce highly realistic vocal sound. • ZONE2 (Dual Zone) Set the destination (front speaker "FRONT" or - Kenwood KDC-BT742U | Instruction Manual - Page 40
different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • Contains Transmitter Module FCC ID : RKXCK5000NVIA • Contains Transmitter Module IC : 5119A-CK5000NVIA 40 | KDC-BT742U/ KDC-X493/ KDC-MP442U IC (Industry Canada) Notice - Kenwood KDC-BT742U | Instruction Manual - Page 41
. 3. Connect the speaker wires of the wiring harness. 4. Connect the wiring harness wires in the following order: ground, battery, ignition. 5. Connect the wiring harness connector to the unit. 6. Install the unit in your car. 7. Reconnect the - battery. 8. Press the reset button. 2WARNING If you - Kenwood KDC-BT742U | Instruction Manual - Page 42
conversation. (KDC-X493/MP442U only) ⁄ To connect the Kenwood navigation system, consult your navigation manual. To car light control switch Ignition wire (Red) Car fuse box ACC Battery wire (Yellow) Ground wire (Black) · (To car chassis) 42 | KDC-BT742U/ KDC-X493/ KDC-MP442U + Ignition - Kenwood KDC-BT742U | Instruction Manual - Page 43
figure. Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). Japanese cars 1 Refer to the section - Kenwood KDC-BT742U | Instruction Manual - Page 44
then press the reset button on the unit. If the "ERROR 99" code does not disappear, consult your nearest service center. IN (Blink): The CD player section is not operating properly. ➪ Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly - Kenwood KDC-BT742U | Instruction Manual - Page 45
. ➪ Wire or insulate the speaker cable properly and press the reset button. If the "PROTECT" code does not disappear, consult your nearest service center. NA FILE: An Audio file is played with a format that this unit can't support. COPY PRO: A copy-protected file is played. READ ERROR: The - Kenwood KDC-BT742U | Instruction Manual - Page 46
: 28 dBμ (25 μV) Bluetooth section (KDC-BT742U) Version : Bluetooth Ver. 2.0 Certified Frequencyrange Object Push Profile) : SYNC (Synchronization Profile) CD player section Laser diode : GaAlAs Digital filter ratio (1 kHz) : 110 dB (KDC-X493) : 105 dB (KDC-BT742U, KDC-MP442U) Dynamic range : 93 dB - Kenwood KDC-BT742U | Instruction Manual - Page 47
60 Hz - 400 Hz ±9 dB BAND2 : 630 Hz - 2.5 kHz ±9 dB BAND3 : 4.0 kHz - 16 kHz ±9 dB Preout level / Load (CD) : 4000 mV/10 kΩ (KDC-X493) : 2500 mV/10 kΩ (KDC-BT742U, KDC-MP442U) Preout impedance : ≤ 600 Ω Auxiliary input Frequency response (±1 dB) : 20 Hz - 20 kHz Input Maximum Voltage : 1200 mV Input - Kenwood KDC-BT742U | Instruction Manual - Page 48
du code de sécurité Réglage manuel de l'horloge Commandes AMP Réglage du mode de démonstration Réglages audio 66 Commande du son Réglage en détail de la commande audio Réglage audio Réglage des enceintes Mémoire de préréglage audio Rappel de préréglage audio 48 | KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 49
Kenwood. • Si vous rencontrez des problèmes pendant l'installation, consultez votre revendeur Kenwood. CD-R ou CD-RW qui n'a pas été finalisé ne peut être lu. (Pour le processus de finalisation, consulter votre logiciel d'écriture de CD-R/CD-RW et le mode d'emploi de votre enregistreur CD-R/CD - Kenwood KDC-BT742U | Instruction Manual - Page 50
Pour le fonctionnement de l'entrée auxiliaire, le réglage du "MENU" > "AUX" dans (page 52) CD, du fichier audio et de la radio s'il est maintenu enfoncé pendant au moins 2 secondes. Met l'appareil en sourdine lors de la réception d'un appel téléphonique (Fonction de KDC-X493 - Kenwood KDC-BT742U | Instruction Manual - Page 51
ST" est allumé. Mode de syntonisation: [AUTO] • Pour le modèle KDC-X493/MP442U: Alterne comme MANUAL" Commande normale manuelle de la syntonisation. Fonctions de lecture du disque et des fichiers audio Lecture du disque: Fente du disque Commence la lecture lorsqu'un disque est inséré. Lorsqu'un CD - Kenwood KDC-BT742U | Instruction Manual - Page 52
la Commande de fonction. Catégorie Élément AUTO "AUTO MEMORY" MEMORY CH-SCAN "CH-SCAN" iPodCTRL "iPodCTRL" PLAY MODE*4 "FILE SCN" "FOLD RDM" "ALL RDM" "FILE REP" "FOLD REP" "TRAC SCN" "DISC RDM" DSP. - Le réglage sur "THROUGH" active la fonction DSP. 52 | KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 53
usine *1 Fonction de KDC-BT742U. *2 Fonction de KDC-X493. *3 Fonction de KDC-MP442U. *4 Le mode reproduction iPod ne peut pas être configuré lorsque est réglé sur "OFF". *5 Consulter la partie (page 84). Catégorie Élément MENU "SECURITY SET"/"SECURITY CLR" "SKIP SRCH - Kenwood KDC-BT742U | Instruction Manual - Page 54
Commande de fonction Catégorie Élément MENU "ZONE2" "SUPREME"*2,3 "AMS CONTROL"*2 "CRSC" "RECEIVE MODE" "TAG MEM" "TAGGING" "ESN=" "NAME SET" "SCROLL" "FAV DELETE" "AUX" "CD READ" "AUDIO PRESET"*2,3 "DEMO MODE" Réglage "REAR"*/ "FRONT" "OFF"/ "ON"* Entrée Aperçu du réglage Permet de spécifier la - Kenwood KDC-BT742U | Instruction Manual - Page 55
le. 4 Quitter le mode de commande de fonction Appuyez sur la touche [SEARCH] pendant au moins 1 seconde. 1 Entrer en mode de commande de fonction soit sélectionné. Exemple: MENU DOT LINE Dans ce manuel, la sélection ci-dessus s'indique de la manière suivante Sélectionnez "MENU" > "DOT LINE". - Kenwood KDC-BT742U | Instruction Manual - Page 56
Horloge Affichage "FREQUENCY" "CLOCK" En source CD et disque externe Information Titre du disque Titre "SOURCE NAME" Horloge "CLOCK" En source radio HD (Optionnel) Information Nom de la station Titre configuré par le mode d'affichage de LX-AMP est affiché. (seulement pour KDC-X493) • Lorsque - Kenwood KDC-BT742U | Instruction Manual - Page 57
auxiliaire dans le mode menu (Dans le mode AUX) Sélectionnez l'affichage "NAME SET". Pour savoir comment "/ "PORTABLE"/ "GAME"/ "VIDEO"/ "TV" 4 Quitter le mode de réglage de l'affichage est affiché, " " est ajouté à la fin Source CD interne Type d'opération Opération Déplacement entre les pistes - Kenwood KDC-BT742U | Instruction Manual - Page 58
de l'élément Retour à l'élément précédent Revenir au menu supérieur Recherche par initiale Opération Tournez la molette article, comme "a", "an", ou "the" il sera considéré en mode de recherche alphabétique, la recherche ne prendra pas en compte cet article KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 59
Fonction de l'iPod Mode de commande manuelle de l'iPod Ce mode vous permet de contrôler un iPod à partir de l'iPod. Entrer en mode de commande manuelle de ) Sélectionner la source du changeur de CD Appuyez sur la touche [SRC]. Sélectionnez l'affichage "CD CH". Rechercher un morceau Tournez la molette - Kenwood KDC-BT742U | Instruction Manual - Page 60
quence à mettre en mémoire Tournez la molette [AUD] vers la droite ou vers la gauche. 2 Entrer en mode de préréglage en mémoire Appuyez sur la touche [SEARCH]. 3 Sélectionner le numéro à mettre en mé équences de bande FM se fait par étapes de 0,1 MHz minimum. 60 | KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 61
KDC-BT742U Fonctionnement de la téléphonie mains libres Avant utilisation • Pour obtenir des détails à propos du téléphone portable Bluetooth ligne: - Insérer un CD. - Connecter un périphérique USB. • Le nom de l' téléphone portable, se brancher en mode de conversation privée peut sélectionner - Kenwood KDC-BT742U | Instruction Manual - Page 62
l'affichage "NUMBER DIAL". 3 Entrer en mode de numérotation préréglée Appuyez sur la touche [SEARCH]. 4 Sélectionner le numéro voulu à rappeler de la mémoire Tournez la molette [AUD] ou poussez-la vers le haut ou vers le bas. 62 | KDC-BT742U/ KDC-X493/ KDC-MP442U 5 Appuyez sur la molette [AUD - Kenwood KDC-BT742U | Instruction Manual - Page 63
pas les appels stockés dans la mémoire du téléphone portable. Effectuer un appel par numérotation vocale 1 Entrer en mode reconnaissance vocale Sélectionnez "MENU" > "VOICE RECOG". Pour savoir comment sélectionner un élément de commande de fonction, référez-vous à la section - Kenwood KDC-BT742U | Instruction Manual - Page 64
au moins 3 secondes. "CLEAR" s'affiche. La fonction code de sécurité est désactivée. 5 Quitter le mode de code de sécurité Appuyez sur la touche [SEARCH]. ⁄ • Si un code de sécurité incorrect est entré, "ERROR" s'affiche. Entrez un code de sécurité correct. 64 | KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 65
bascule le réglage entre "ON" et "OFF". Fonction de KDC-X493 Avec connexion d'appareil LX AMP Commandes AMP Vous pouvez contrôler la LX AMP connectée à l'appareil. 1 Sélectionner l'élément du code AMP pendant le mode menu Sélectionnez l'affichage "AMS CONTROL". Pour savoir comment sélectionner des - Kenwood KDC-BT742U | Instruction Manual - Page 66
re 15 - Avant 15 arrière Quitter le mode de commande du son (mode de commande du volume) * Fonction de KDC-X493/MP442U. ⁄ • Mémoire de tonalité source : Pour chaque source, vous pouvez régler les fréquences graves, moyennes et aiguës. • "USER": les derniers réglages de graves, fréquences moyennes - Kenwood KDC-BT742U | Instruction Manual - Page 67
sur la molette [AUD]. 4 Régler l'élément de configuration du son Tournez la molette [AUD]. 5 Quitter le mode de configuration du son Appuyez sur la molette [AUD] pendant au moins 1 seconde. Fonction de KDC-X493/MP442U Réglage des enceintes Réglage fin pour que la valeur de Système Q soit optimale - Kenwood KDC-BT742U | Instruction Manual - Page 68
ère Fonction de KDC-X493/MP442U Rappel de préréglage audio Vous pouvez rappeler le réglage sonore enregistré par la (page 68). 1 Sélectionner la source 2 Entrer en mode de rappel de préréglage audio (Autre mode que Veille) Sélectionnez "MENU" > "AUDIO PRESET". Appuyez - Kenwood KDC-BT742U | Instruction Manual - Page 69
Fonction de KDC-BT742U Réglages audio (DSP) Sélection de la cabine Vous pouvez hicule Tournez la molette [AUD] et appuyez sur son centre lorsque l'élément souhaité s'affiche. 3 Quitter le mode de sélection de la cabine Appuyez sur la touche [SEARCH]. ⁄ • Vous pouvez compenser les distances de mani - Kenwood KDC-BT742U | Instruction Manual - Page 70
de réglage Affichage Gamme Mémoire de Système Q "EQ" "NATURAL"(Naturel)/"USER"/ préréglage "ROCK" (Rock)/ "POPS" (Pops)/ "PRESET" "EASY KDC-BT742U/ KDC-X493/ KDC-MP442U Bande "BAND1" "BAND2" "BAND3" Fréquence 60/ 100/ 160/ 250/ 400 Hz 630/ 1k/ 1,6k/ 2,5k Hz 4/ 6,3/ 10/ 16 kHz 1 Entrer en mode - Kenwood KDC-BT742U | Instruction Manual - Page 71
toutes les sources deviennent la valeur qui a été enregistrée. • "USER 1", "USER 2": La mémoire ne peut pas être effacée par la touche de réinitialisation. • Cette fonction ne peut pas être enregistrée lorsque l'égaliseur de l'iPod est réglé en mode - Kenwood KDC-BT742U | Instruction Manual - Page 72
enregistré dans les favoris. 1 Entrer en mode d'effacement de préréglage en mémoire Sélectionner "MENU" > "FAV DELETE". Pour savoir comment sé [AUD]. . "COMPLETE" s'affiche. 4 Quitter le mode d'effacement de préréglage en mémoire Appuyez sur la touche [SEARCH]. 72 | KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 73
enregistrement d'un appareil en utilisant l'appareil Bluetooth En utilisant l'appareil Bluetooth, enregistrer les appareils mains libres (association). Sélectionnez "KENWOOD BT CD/R-3P2" à partir de la liste des appareils connectés. 3 Saisir un code PIN Saisissez le code PIN enregistré tel qu'indiqu - Kenwood KDC-BT742U | Instruction Manual - Page 74
liste, sélectionnez "OTHER PHONE". 74 | KDC-BT742U/ KDC-X493/ KDC-MP442U Enregistrement du code PIN En utilisant l'appareil Bluetooth, spécifiez le code PIN nécessaire à l'enregistrement de cet appareil. 1 Entrer en mode édition du code PIN Sélectionnez "MENU" > "PIN EDIT". Appuyez sur la molette - Kenwood KDC-BT742U | Instruction Manual - Page 75
lectionné, désélectionnez-le puis sélectionnez-en un autre. Supprimer un appareil Bluetooth enregistré Vous pouvez supprimer un appareil Bluetooth enregistré. 1 Entrer en mode suppression d'appareil Bluetooth Sélectionnez "MENU" > "DEVICE DEL". Appuyez sur la molette [AUD] pendant au moins 1 seconde - Kenwood KDC-BT742U | Instruction Manual - Page 76
Fonction de KDC-BT742U Configuration Bluetooth Affichage de la version du micrologiciel Afficher la version du micrologiciel de cet appareil. 1 Entrer en mode mise à jour du microprogramme Bluetooth Sélectionnez "MENU" > "BT F/W UPDATE". Appuyez sur la molette [AUD] pendant au moins 1 seconde. Pour - Kenwood KDC-BT742U | Instruction Manual - Page 77
. SMS (Service de messagerie - Short Message Service) Le SMS RECEIVED" s'affiche. L'affichage disparaît dès que l'on exécute une opération. Afficher le SMS 1 Entrer en mode boîte de réception SMS Sélectionnez "MENU phone portable n'était pas connecté en Bluetooth ne peut pas être affiché. Téléchargez - Kenwood KDC-BT742U | Instruction Manual - Page 78
Fonction de KDC-BT742U Configuration Bluetooth Commande tuner satellite radio (en option) Téléchargement de SMS Téléchargez les message de texte (SMS) arrivés sur votre téléphone portable afin de pouvoir les lire sur cet appareil. 1 Entrer en mode téléchargement SMS Sélectionnez "MENU" > "SMS - Kenwood KDC-BT742U | Instruction Manual - Page 79
mémoire Poussez la molette [AUD] vers la droite ou vers la gauche. 2 Entrer en mode de préréglage en mémoire Appuyez sur la touche [SEARCH]. 3 Sélectionner le numéro ne peut être reçu à cause de mauvaises condition des ondes radio ou d'autres problèmes de ce type, le message "ACQUIRING SIGNAL"/ "NO - Kenwood KDC-BT742U | Instruction Manual - Page 80
mode de balisage HD Radio é en sélectionnant "MENU" > "TAG MEM mode de fonctionnement, telles que les procédures de commande audio et autres opérations. Commande Double Zone Système double zone activé et désactivé [2-ZONE] Commande de volume du canal arrière [5]/ [∞] 80 | KDC-BT742U/ KDC-X493/ KDC - Kenwood KDC-BT742U | Instruction Manual - Page 81
tuner/HD Radio Sélection de bande [FM]/[AM] Sélection de station [4]/[¢] Rappel des stations préréglées [1] - [6] Dans la source CD/USB Sélection du boîtier. Commande du téléphone mains libres Effectuer un appel Saisir le mode de sélection de la méthode de numérotation [ ] Sélectionner une mé - Kenwood KDC-BT742U | Instruction Manual - Page 82
audio reproductible MP3 (.mp3), WMA (.wma) • Supports de disque compatibles CD-R/RW/ROM • Formats de fichiers de disques compatibles ISO 9660 Level 1/2, Joliet, Romeo, Nom de fichier étendu. • Périphériques USB compatibles Classe de stockage de masse USB • Systèmes de fichier de périph - Kenwood KDC-BT742U | Instruction Manual - Page 83
kenwood.com/bt/information/ ⁄ • Les unités supportant la fonction Bluetooth ont été certifiées conformes à la norme Bluetooth selon la procédure prescrite par Bluetooth de celles figurant dans le mode d'emploi; par conséquent, reportez-vous aux instructions supplémentaires suivantes. - Kenwood KDC-BT742U | Instruction Manual - Page 84
du menu • CD audio. 84 | KDC-BT742U/ KDC-X493/ KDC-MP442U • DISPLAY Si l'appareil n'est pas utilisé pendant au moins 5 secondes avec "OFF" sélectionné, l'affichage s'éteint. En mode feet SUB-W • DVC STATUS (Affiche l'état de l'appareil Bluetooth) Vous pouvez afficher l'état de connexion, la force du - Kenwood KDC-BT742U | Instruction Manual - Page 85
du bruit. • RECEIVE MODE (réglage du mode de réception) Permet de définir le mode de réception du système HD Radio. Auto: Sélectionne automatiquement et la transparence de la voix dans la musique des fichiers audio comprimés et des CD audio de sorte à produire un son vocal très réel. • ZONE2 (zone - Kenwood KDC-BT742U | Instruction Manual - Page 86
à accepter tout brouillage radioélectrique reçu, même si KDC-BT742U/ KDC-X493/ KDC-MP442U • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners - Kenwood KDC-BT742U | Instruction Manual - Page 87
dernier et le châssis du véhicule, ce qui a pu activer la fonction de protection. Le câble des enceintes doit donc être vérifié. • Si l'allumage de votre de l'antenne Bluetooth. Antenne Bluetooth Au sujet des lecteurs de CD/changeurs de disque connectés à cet appareil Si le lecteur de CD /changeur de - Kenwood KDC-BT742U | Instruction Manual - Page 88
Connectez à la borne qui est mise à la masse lorsque le téléphone sonne ou pendant les conversations. (seulement pour KDC-X493/MP442U) ⁄ Pour connecter au système de navigation Kenwood, consultez votre manuel de navigation. Vers le commutateur de commande de phares Câble d'allumage (Rouge) Câble de - Kenwood KDC-BT742U | Instruction Manual - Page 89
cadre en caoutchouc dur> puis retirez le cadre en caoutchouc dur. 2 Alignez les orifices de l'appareil (2 emplacements de chaque côté) avec les supports de fixation du véhicule et fixez l'appareil avec les vis fournies. T N T/N NT T: Voitures Toyota N: Voitures Nissan crochet loquet Accessoire - Kenwood KDC-BT742U | Instruction Manual - Page 90
le magasin à disques. Appuyez ensuite sur la touche reset de l'unité. Si le code d'erreur "ERROR99" ne s'efface pas, consultez le centre de services le plus proche. IN (clignote): Le lecteur CD ne marche pas correctement. ➪ Réinsérez le CD. Si le CD ne peut pas être éjecté ou si l'affichage - Kenwood KDC-BT742U | Instruction Manual - Page 91
réinitialisation Si le code "PROTECT" ne disparaît pas, consultez le centre de réparation le plus proche. NA FILE: Le format du fichier audio lu n'est pas supporté par cette unité. COPY PRO: Un fichier interdit de copie a été lu. READ ERROR: Le système de fichier du dispositif USB connecté est - Kenwood KDC-BT742U | Instruction Manual - Page 92
é utile (S/B = 20dB) : 28 dBμ (25 μV) Section Bluetooth (KDC-BT742U) Version : Certifié version Bluetooth 2.0 Bande de fréquences : 2,402 - 2,480 GHz 01 % Taux de Signal/Bruit (1 kHz) : 110 dB (KDC-X493) : 105 dB (KDC-BT742U, KDC-MP442U) Gamme dynamique : 93 dB Décodage MP3 : Compatible avec - Kenwood KDC-BT742U | Instruction Manual - Page 93
60 Hz - 400 Hz ±9 dB BANDE 2 : 630 Hz - 2,5 kHz ±9 dB BANDE 3 : 4,0 kHz - 16 kHz ±9 dB Niveau de préamplification/charge (CD) : 4000 mV/10 kΩ (KDC-X493) : 2500 mV/10 kΩ (KDC-BT742U, KDC-MP442U) Impédance de pré-sortie : ≤ 600 Ω Entrée auxiliaire Réponse en fréquence (±1 dB) : 20 Hz - 20 kHz Tension - Kenwood KDC-BT742U | Instruction Manual - Page 94
HD Radio (etiquetas de iTunes) Funciones básicas del mando a distancia 126 Apéndice 128 Accesorios/ Procedimiento de instalación 133 Conexión de cables a los terminales 134 Instalación/ Desmontaje de la unidad 135 Guía sobre localización de averías 136 Especificaciones 138 94 | KDC - Kenwood KDC-BT742U | Instruction Manual - Page 95
reproducir los CD con . Puede que no reproduzca correctamente los discos que no tienen la marca. • No se puede reproducir un CD-R o CD-RW que no ha sido finalizado. (Para el proceso de finalización remítase a su software escrito CD-R/CD-RW, y a su manual de instrucciones de grabador de CD-R/ CD-RW - Kenwood KDC-BT742U | Instruction Manual - Page 96
conectada, la fuente cambia entre Sintonizador ("TUNER"), USB o iPod ("USB" o "iPod"), CD ("CD"), Entrada auxiliar ("AUX") y En espera ("STANDBY auxiliar requiere su activación en "MENU" > "AUX" de (página 98). 96 | KDC-BT742U/ KDC-X493/ KDC-MP442U Liberación de la placa frontal - Kenwood KDC-BT742U | Instruction Manual - Page 97
modo manual. PLAY MODE Le permite configurar el modo de reproducción. DSP* Le permite configurar el entorno de sonido. MENU Le modo de sintonización: [AUTO] • Para KDC-X493/MP442U: Cambia del siguiente modo cada vez que se pulsa este botón. • Para KDC-BT742U: Cada vez que se presiona - Kenwood KDC-BT742U | Instruction Manual - Page 98
el control de función. Categoría Elemento AUTO "AUTO MEMORY" MEMORY CH-SCAN "CH-SCAN" iPodCTRL "iPodCTRL" PLAY MODE*4 "FILE SCN" "FOLD RDM" "ALL RDM" "FILE REP" "FOLD REP" "TRAC SCN" "DISC RDM" DSP. - Si se ajusta en "THROUGH" activa la función DSP. 98 | KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 99
KDC-BT742U. *2 Función de KDC-X493. *3 Función de KDC-MP442U. *4 El modo de reproducción iPod no se puede configurar cuando se ha ajustado en "OFF". *5 Consulte (página 130). Categoría MENU Elemento "SECURITY SET"/ "SECURITY de un dispositivo Bluetooth (conexión). - Kenwood KDC-BT742U | Instruction Manual - Page 100
Control de función Categoría Elemento MENU "ZONE2" "SUPREME"*2,3 "AMS CONTROL"*2 "CRSC" "RECEIVE MODE" "TAG MEM" "TAGGING" "ESN=" "NAME SET" "SCROLL" "FAV DELETE" "AUX" "CD READ" "AUDIO PRESET"*2,3 "DEMO MODE" Preajuste "REAR"*/ "FRONT" "OFF"/ "ON"* Entrada Vista general de ajustes Especifica el - Kenwood KDC-BT742U | Instruction Manual - Page 101
botón [SEARCH]. Repita la selección y determinación hasta que seleccione su elemento de configuración deseado. Ejemplo: MENU DOT LINE En este manual, la selección anterior se indica como Seleccione "MENU" > "DOT LINE". 3 Realice un ajuste Pulse el mando [AUD] o gire el mando [AUD] para seleccionar - Kenwood KDC-BT742U | Instruction Manual - Page 102
En la fuente de CD y disco Externo Información la fuente de HD Radio (Opcional) Información KDC-X493) • Cuando se selecciona "FOLDER NAME" mientras se reproduce con iPod, los nombres aparecerán en función de los elementos de navegación seleccionados actualmente. • Si el modo de control manual - Kenwood KDC-BT742U | Instruction Manual - Page 103
de Menú (En el modo AUX) Seleccione "NAME SET". Para saber como seleccionar elementos del control de funci [AUD]. "AUX"/ "DVD"/ "PORTABLE"/ "GAME"/ "VIDEO"/ "TV" 4 Salga del modo de ajuste de la aparece, se añade " " al final. Fuente CD interna Tipo de operación Movimiento entre las pistas Selecci - Kenwood KDC-BT742U | Instruction Manual - Page 104
de música en la posición del carácter seleccionado. 104 | KDC-BT742U/ KDC-X493/ KDC-MP442U Cancelación de la Búsqueda de música por inicial Pulse el reproducen en orden aleatorio. Entrar al modo Todo aleatorio Seleccione "PLAY MODE" > "ALL RDM". Para saber como seleccionar elementos del control - Kenwood KDC-BT742U | Instruction Manual - Page 105
consulte (página 98). ⁄ • En el modo de control manual de iPod, el iPod no se puede controlar con esta unidad. • Este modo disco (Opcional) Selección de la fuente cambiador de CD Pulse el botón [SRC]. Seleccione la visualización "CD CH". Búsqueda de música Pulse el mando [AUD - Kenwood KDC-BT742U | Instruction Manual - Page 106
ón de acceso directo Pulse el botón [DIRECT] del mando a distancia. ⁄ • Puede introducir la frecuencia de banda FM en pasos de un mínimo de 0,1 MHz. 106 | KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 107
de KDC-BT742U Funcionamiento para llamar por teléfono con manos libres Antes de usar • Para más detalles sobre el teléfono móvil de Bluetooth con la ⁄ • Las siguientes operaciones desconectan la línea: - Inserte un CD. - Conecte un dispositivo USB. • El nombre de la llamada se visualiza si ya se ha - Kenwood KDC-BT742U | Instruction Manual - Page 108
Función de KDC-BT742U Funcionamiento para llamar por teléfono con manos libres Realizar una llamada 1 Entre al modo de método de marcación Pulse • Durante la búsqueda, se buscará un carácter sin acento, como "u", en lugar de un carácter con acento, como "ü". 108 | KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 109
en la memoria del teléfono móvil. Realización de una llamada con marcación por voz 1 Entre al modo de reconocimiento de voz Seleccione "MENU" > "VOICE RECOG". Para saber como seleccionar un elemento del Control de función, consulte (página 98). Aparece "V-RECOG READY". 2 Pulse - Kenwood KDC-BT742U | Instruction Manual - Page 110
de Menú (En modo de espera) Aparece "SECURITY SET". Para saber como seleccionar elementos del control de funci segundo. Cuando aparece "ENTER", también aparece "CODE". 3 Ingrese el código de seguridad Tipo de ERROR". Introduzca el código de seguridad correcto. 110 | KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 111
MODE". Para saber como seleccionar elementos del control de función, consulte (página 98). 2 Ajuste el modo de demostración Pulse el mando [AUD] durante al menos 2 segundos. Al pulsar este botón por 2 segundos o más el ajuste cambia entre "ON" y "OFF". Función de KDC-X493 Con - Kenwood KDC-BT742U | Instruction Manual - Page 112
15 Salir del modo de control de audio (Modo de control de volumen) * Función de KDC-X493/MP442U. ⁄ • Memoria del tono de fuente: Puede ajustar los bajos, medios y los agudos para cada fuente. • "USER": Los intervalos seleccionados en último lugar para el nivel de graves, el nivel de medios y el - Kenwood KDC-BT742U | Instruction Manual - Page 113
de configuración de audio Gire el mando [AUD]. 5 Salga el modo de configuración de audio Pulse el mando [AUD] durante al menos 1 segundo. Función de KDC-X493/MP442U Ajuste de altavoz Haga una sintonización precisa para que el valor de System Q sea óptimo cuando se ajuste el tipo de altavoz de la - Kenwood KDC-BT742U | Instruction Manual - Page 114
modo de memoria del preajuste de audio (Otro diferente al modo en espera) Seleccione "MENU" > "AUDIO PRESET". Pulse el mando [AUD] durante al menos 1 segundo. Para volumen, Sistema de zona dual, Volumen trasero Función de KDC-X493/MP442U Recuperación del preajuste de audio Recuperación de la - Kenwood KDC-BT742U | Instruction Manual - Page 115
Función de KDC-BT742U Ajustes de audio (DSP) Selección de cabina Puede compensar el retardo del tiempo de llegada del sonido seleccionando su entorno de entre los tipos - Kenwood KDC-BT742U | Instruction Manual - Page 116
Memoria System Q "EQ" "NATURAL" (Natural)/ predeterminada "USER"/ "ROCK" (Rock)/ "PRESET" "POPS" (Pops (Top 40)/"JAZZ"(Jazz)/ "GAME" (Juegos)/ "iPod" Ajuste del ecualizador "MANUAL"/ "BAND" Frecuencia "F0" central Calidad "Q" Nivel "GAIN" Consulte lo siguiente KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 117
de audio Pulse el botón [SEARCH]. ⁄ • Registre 6 pares de memorias predeterminadas de audio. • "USER 1": Al pulsar el botón de reinicio, todas las fuentes tendrán el valor de ajuste registrado. • "USER 1", "USER 2": La memoria no se puede borrar mediante el botón de reinicio. • Esta función no se - Kenwood KDC-BT742U | Instruction Manual - Page 118
Fuente Elemento de ajuste TUNER/SIRIUS/XM/HD Memoria de presintonización iPod Pantalla de selecci elementos en el iPod. 118 | KDC-BT742U/ KDC-X493/ KDC-MP442U Rellamada predeterminada Recuperación de un el modo de eliminar memoria predeterminada Seleccione "MENU" > "FAV DELETE". Para saber como - Kenwood KDC-BT742U | Instruction Manual - Page 119
KDC-BT742U Configuración de Bluetooth al menos 1 segundo. Seleccione "NAME SET". 4 Escriba el nombre Tipo de operaci Bluetooth Utilice el dispositivo Bluetooth para registrar (enlazar) la unidad de manos libres. Seleccione "KENWOOD BT CD de registro del dispositivo Bluetooth Seleccione "MENU" > "DVC - Kenwood KDC-BT742U | Instruction Manual - Page 120
la lista, seleccione "OTHER PHONE". 120 | KDC-BT742U/ KDC-X493/ KDC-MP442U Registro del código PIN Al operar el dispositivo Bluetooth, especifique el código PIN necesario para el registro de esta unidad. 1 Entre al modo de edición del código PIN Seleccione "MENU" > "PIN EDIT". Pulse el mando [AUD - Kenwood KDC-BT742U | Instruction Manual - Page 121
móvil, quite la selección y después seleccione uno diferente. Borrar un dispositivo Bluetooth registrado Puede borrar un dispositivo Bluetooth registrado. 1 Entre al modo de eliminación de dispositivo Bluetooth Seleccione "MENU" > "DEVICE DEL". Pulse el mando [AUD] durante al menos 1 segundo. Para - Kenwood KDC-BT742U | Instruction Manual - Page 122
Función de KDC-BT742U Configuración de Bluetooth Visualización de la versión del firmware Se muestra la versión del firmware de esta unidad. 1 Entre al modo de actualización del Firmware de Bluetooth Seleccione "MENU" > "BT F/W UPDATE". Pulse el mando [AUD] durante al menos 1 segundo. Para saber - Kenwood KDC-BT742U | Instruction Manual - Page 123
mensaje Aparece "SMS RECEIVED". La visualización desaparece con cualquier operación. Visualización del SMS 1 Entre al modo de Buzón de Entrada de SMS Seleccione "MENU" > "SMS el teléfono móvil no estaba ligado con Bluetooth. Descargue el SMS. • El mensaje corto no se puede visualizar durante la descarga del - Kenwood KDC-BT742U | Instruction Manual - Page 124
Función de KDC-BT742U Configuración de Bluetooth Control del sintonizador de radio por satélite (Opcional) Descarga de SMS Descarga los mensajes cortos (SMS) recibidos en el teléfono móvil de tal modo que puedan leerse en esta unidad. 1 Entre al modo de descarga de SMS Seleccione "MENU" > "SMS - Kenwood KDC-BT742U | Instruction Manual - Page 125
directo se cancelará automáticamente. • Si no puede recibir ninguna señal en el canal de entrada debido a las malas condiciones en las ondas de radio u otro problema similar, aparece "ACQUIRING SIGNAL"/ "NO SIGNAL". Español | 125 - Kenwood KDC-BT742U | Instruction Manual - Page 126
Store. 1 Ingrese en el modo de asignación de etiquetas de HD Radio Pulse el botón [38]. En la pantalla aparecerá "TAG" transferirá al iPod conectado. • El uso de la memoria puede comprobarse seleccionando "MENU" > "TAG MEM" de (página 98). VOL KDC-BT742U/ KDC-X493/ KDC-MP442U - Kenwood KDC-BT742U | Instruction Manual - Page 127
En fuente de Sintonizador/HD Radio Selección de banda [FM]/[AM] Selección de emisora [4]/[¢] Emisoras predeterminadas de rellamada [1] - [6] En fuente de CD/USB Selección de música [4]/[¢] Selección de carpeta/disco [FM]/[AM] Pausa/Reproducción [38] En fuente de sintonizador de radio por satélite - Kenwood KDC-BT742U | Instruction Manual - Page 128
reproducirse MP3 (.mp3), WMA (.wma) • Medio de disco reproducible CD-R/RW/ROM • Formato de archivo de disco reproducible ISO 9660 Nivel 1/2, Joliet, Romeo, Nombre de archivo largo. • Dispositivo USB reproducible USB del tipo de almacenamiento masivo • Sistema de archivos del dispositivo - Kenwood KDC-BT742U | Instruction Manual - Page 129
kenwood.com/bt/information/ ⁄ • Las unidades que admiten la función Bluetooth han certificado su conformidad con el estándar Bluetooth siguiendo el procedimiento descrito por Bluetooth el menú, consulte en este manual de instrucciones. Acerca de la visualización El estado del - Kenwood KDC-BT742U | Instruction Manual - Page 130
de audio y CD de música cuando se reproduce el disco. 2 : Fuerza la reproducción como CD de música. 130 | KDC-BT742U/ KDC-X493/ KDC-MP442U • +2.3 feet +0 feet SUB-W • DVC STATUS (Visualización del estado del dispositivo Bluetooth) Puede visualizar el estado de conexión, la fuerza de la señal y - Kenwood KDC-BT742U | Instruction Manual - Page 131
la reducción del ruido. • RECEIVE MODE (Ajuste del modo de recepción) Ajusta el modo de recepción del HD Radio. Auto: Sintoniza automáticamente la y transparencia de la voz en los archivos de audio comprimidos y música CD-DA para producir un sonido vocal mucho más realista. • ZONE2 (Zona dual - Kenwood KDC-BT742U | Instruction Manual - Page 132
Apéndice 132 | KDC-BT742U/ KDC-X493/ KDC-MP442U • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners. • iTunes is a trademark of Apple Inc. • - Kenwood KDC-BT742U | Instruction Manual - Page 133
enciende la alimentación (se muestra "PROTECT"), el cable de altavoz puede que haya Bluetooth. Unidad de antena Bluetooth Acerca de los reproductores de CD/ cambiadores de discos conectados a esta unidad Si el reproductor de CD • Una estación emisora o un radio portátil ubicado en los alrededores - Kenwood KDC-BT742U | Instruction Manual - Page 134
tipo polo corto. Conéctelo al terminal de tierra cuando suene el teléfono o durante la conversación. (solo KDC-X493/MP442U) ⁄ Para conectar el sistema de navegación Kenwood, consulte el manual del sistema de navegación. A interruptor de control de luces del vehículo Cable de encendido (rojo) Cable - Kenwood KDC-BT742U | Instruction Manual - Page 135
Instalación/Desmontaje de la unidad Automóviles no japoneses Extracción del marco de goma dura 1 Enganche las uñas de agarre en la herramienta de extracción y quite los dos enganches en el nivel superior. Suba el bastidor y tire de él hacia adelante tal como se indica en la figura. Doble las leng - Kenwood KDC-BT742U | Instruction Manual - Page 136
Recepción de radio deficiente. ✔ de teléfono móvil. ☞ La opción "MENU" > "CALL BEEP" de - Kenwood KDC-BT742U | Instruction Manual - Page 137
Bluetooth. No se pueden registrar más dispositivos Bluetooth. PIN CODE NG: El código PIN es incorrecto. CONNECT NG: No puede conectarse la unidad en el dispositivo. PAIRING NG: Error a la unidad se ha extraído. HD MEM FULL : La memoria de etiquetas de HD Radio está LLENA. iPod MEM FULL: La - Kenwood KDC-BT742U | Instruction Manual - Page 138
: 28 dBμ (25 μV) Sección Bluetooth (KDC-BT742U) Versión : Bluetooth ver. 2.0 certificado Gama defrecuencias : Perfil de sincronización) Sección del reproductor de CD Diodo láser : GaAlAs Filtro digital (D/A) a ruido (1 kHz) : 110 dB (KDC-X493) : 105 dB (KDC-BT742U, KDC-MP442U) Gama dinámica : 93 dB - Kenwood KDC-BT742U | Instruction Manual - Page 139
±9 dB BANDA2 : 630 Hz - 2,5 kHz ±9 dB BANDA3 : 4,0 kHz - 16 kHz ±9 dB Nivel de salida de preamplificador/carga (CD) : 4000 mV/10 kΩ (KDC-X493) : 2500 mV/10 kΩ (KDC-BT742U, KDC-MP442U) Impedancia de salida de preamplificador : ≤ 600 Ω Entrada auxiliar Respuesta de frecuencia (±1 dB) : 20 Hz - 20 kHz - Kenwood KDC-BT742U | Instruction Manual - Page 140
KDC-BT742U
KDC-X493
KDC-MP442U
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D’EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
©
B64-4314-00/00 (KW/K0)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided
below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KDC-BT742U/ KDC-X493/ KDC-MP442U
Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com