Kenwood KRF-V6300D User Manual

Kenwood KRF-V6300D Manual

Get Kenwood KRF-V6300D PDF manuals and user guides View all Kenwood KRF-V6300D manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood KRF-V6300D manual content summary:

  • Kenwood KRF-V6300D | User Manual - Page 1
    AUDIO VIDEO CONTROL CENTER KRF-V6300D INSTRUCTION MANUAL Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC
  • Kenwood KRF-V6300D | User Manual - Page 2
    to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing ship the unit in the future. Keep this manual handy for future reference. CAUTION RISK OF ELECTRIC SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. 2 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 3
    unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 6. Power Sources - completion of any service or repairs to this product, ask the service technician to perform safety to proper grounding of the mast and supporting structure, grounding of the lead-in
  • Kenwood KRF-V6300D | User Manual - Page 4
    Width mode Convenient functions 42 Display dimmer adjustment Listening with headphones Muting the sound Remote control operations for Kenwood DVD players 43 Troubleshooting 44 Resetting the Microcomputer In regard to contact cleaner Maintenance of the unit Specifications 47 HDMI, the HDMI logo
  • Kenwood KRF-V6300D | User Manual - Page 5
    natural sound field. Audio Delay function (Lip Sync)∞ This function corrects deviation between the video and audio. Notes on instructions The operating instructions given in this manual assume that the user mainly operates the receiver using the remote control unit. When the same operation is also
  • Kenwood KRF-V6300D | User Manual - Page 6
    . @ SOUND key · Use to adjust the sound quality and ambience effects. # MEMORY key fi Use for manual memory of radio stations. $ BAND key Use to select the broadcast band. % AUTO/MONO key Use to select the condition, the system can be turned ON by the remote control unit. 6 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 7
    Display Speaker indicator The indicator(s) corresponding to the front speakers in use lights up. PTY indicator Lights up when searching a radio station by program type. RDS indicator Lights up when receiving an RDS station. AUTO indicator Lights up when the tuning mode is "Auto". AUTO DETECT
  • Kenwood KRF-V6300D | User Manual - Page 8
    key Use to operate the Kenwood DVD player.* 2 MEMORY key fi Use for manual memory of radio stations. REPEAT key Use to operate the Kenwood DVD player.* 3 RDS DISP. key ‡ Use to display RDS information. AUDIO key Use to operate the Kenwood DVD player.* 8 KRF-V6300D 4 PTY key fl Use for
  • Kenwood KRF-V6300D | User Manual - Page 9
    Preparing the remote control Loading batteries œ Remove the cover. ∑ Insert batteries. Operation When the Standby indicator is lit, the power turns ON when you press [ RECEIVER] on the remote control unit. When the power comes ON, press the key you want to operate. When operating the connected
  • Kenwood KRF-V6300D | User Manual - Page 10
    components, be sure to refer to the instruction manuals supplied with the components you are connecting have been made properly, reset the microcomputer by referring to . r ¤ CAUTION The cm Back panel : 10 cm 10 KRF-V6300D Speaker placement Front speaker Front speaker Subwoofer
  • Kenwood KRF-V6300D | User Manual - Page 11
    Connecting components equipped with HDMI terminals This unit has HDMI terminals which let you enjoy high definition video such as Blu-ray discs. Audio connection (connection A or B) is necessary to output audio signal from the speakers connected to this unit. 1 Using an HDMI cable, connect the HDMI
  • Kenwood KRF-V6300D | User Manual - Page 12
    PLAY IN AUX SURROUND FRONT R L CD/DVD VIDEO2 R L MD/T VID R DVD/6CH IN SUB WOOFER CENTER AUDIO PLAY AUX SURROUND FRONT R L CD/DVD VIDEO2 R L 12 KRF-V6300D SUBWOOFER OUT DVD player FRONT OUT SURROUND CENTER OUT OUT
  • Kenwood KRF-V6300D | User Manual - Page 13
    Connecting a CD player 1 Connect the audio line : Connection A (analog) or B (digital) Connecting an MD player/ a cassette player 1 Connect the audio line : Connection A and B HDMI MONITOR OUT DVD/6CH IN VIDEO 2 IN DIGITAL IN DVD/6CH IN SUB WOOFER CENTER OPTICAL OPTICAL COAXIAL CD/DVD VIDEO 2
  • Kenwood KRF-V6300D | User Manual - Page 14
    Monitor • If your VIDEO player has COMPONENT VIDEO OUT, COMPONENT VIDEO connection is possible for better video quality. ( ^) 14 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 15
    Connecting a video recorder 1 Connect the audio line : Connection A 2 Connect the video line : Connection B HDMI MONITOR OUT DVD/6CH IN VIDEO 2 IN DIGITAL IN VIDEO DVD/6CH VIDEO 2 MONITOR IN IN OUT VIDEO 1 IN COMPONENT VIDEO DVD/6CH IN SUB WOOFER CENTER AUDIO PLAY IN AUX OPTICAL OPTICAL
  • Kenwood KRF-V6300D | User Manual - Page 16
    be necessary to switch the input of the TV according to the type of video input (COMPONENT input or VIDEO (COMPOSITE) input). Refer to the instruction manual of your TV for more information. 16 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 17
    Connecting the antennas The broadcast reception cannot be made unless the antennas are connected. Connect the antennas correctly as instructed below. HDMI MONITOR OUT DVD/6CH IN VIDEO 2 IN DIGITAL IN VIDEO DVD/6CH VIDEO 2 MONITOR IN IN OUT VIDEO 1 IN COMPONENT VIDEO DVD/6CH
  • Kenwood KRF-V6300D | User Manual - Page 18
    impedance other than that indicated on the rear panel of the receiver could result in malfunctions or damage to the speakers or the receiver. 18 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 19
    Connecting the terminals Screw type terminal œ Strip coating. ∑ Loosen. é Insert the cord. ® Secure. Push type terminal œ Strip coating. ∑ Push the lever. é Insert the cord. ® Return the lever. • Never short circuit the + and - speaker cords. • If the left and right speakers are connected inversely
  • Kenwood KRF-V6300D | User Manual - Page 20
    up. To turn this unit OFF (standby mode) Press the [ (Power)] key on this unit or the [ RECEIVER] key on the remote control unit. 20 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 21
    Speaker setup (Easy Setup) The speaker setup can be completed by simply selecting the room type and listening position. The audio will be corrected automatically according to the characteristics of the speaker system in use. If more detailed speaker settings are required, use the procedure in <
  • Kenwood KRF-V6300D | User Manual - Page 22
    [SETUP]. • The [SETUP] key and [MULTI CONTROL] knob on the front panel can also be used to select the item in the setup mode. 22 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 23
    Speaker setup ("SP SETUP") This sets up the speakers according to the speaker system in use. Speaker setup is required every time the speaker system is changed. œ See (™) and select "SP SETUP". ∑ Use [MULTI CONTROL ∞/5] to select the subwoofer setting. Speaker
  • Kenwood KRF-V6300D | User Manual - Page 24
    CONTROL ∞/5] and adjust the volume of the test tone. When you finish adjusting, press [SETUP]. If you select "MANUAL": Use [MULTI CONTROL ∞/5] to adjust the volume of the test tone and press [SETUP]. You will hear the test wish to exit the setup mode, see ™. 24 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 25
    Crossover ("CROSS OVER") The crossover frequency is the lower limit of the bass frequencies reproduced from the speakers set to "NML" in the . The frequencies below the set crossover frequency are output from other speakers (those set to "LRG" and the subwoofer). œ See
  • Kenwood KRF-V6300D | User Manual - Page 26
    MODE]. Each press switches the setting as follows: Display "F-AUTO"*1 "D-MANUAL" "6CH INPT"*2*3 "ANALOG"*3 Setting Full Auto Digital Manual 6ch input Analog input Input signal Digital input or Analog input Digital too quickly, sound may not be produced. Press [INPUT MODE] again. 26 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 27
    Playback VOLUME CONTROL INPUT SELECTOR AV AUX Monitoring the input source in the original sound (STRAIGHT DECODE) The signal input from a source can be output directly without any sound field effect added to it. VOLUME /o Input source keys œ Select the source you want to play. Use the Input
  • Kenwood KRF-V6300D | User Manual - Page 28
    does not change. ( §) • The video other than the HDMI input video cannot be monitored when PURE AUDIO MODE is selected. 28 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 29
    Enjoying various surround effects Listen mode This unit is equipped with listen modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand. See <
  • Kenwood KRF-V6300D | User Manual - Page 30
    that expands stereo non-matrix recordings into the five- or six-channel layout without diminishing the subtlety and integrity of the original stereo recording. 30 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 31
    DTS 96/24 DTS 96/24 made it possible to achieve a wide frequency range of over 40 kHz by increasing the sampling frequency to 96 or 88.2 kHz. Moreover, DTS 96/24's ability of 24 bit resolution offers the same frequency band and dynamic range as 96 kHz/24 bit PCM. DTS 96/24 is, as with conventional
  • Kenwood KRF-V6300D | User Manual - Page 32
    IIx surround Movie mode "PLIIx MUSIC"* Pro Logic IIx surround Music mode "PLIIx GAME"* Pro Logic IIx surround Game mode "PLII MOVIE"* 32 KRF-V6300D Pro Logic II surround Movie mode Indicator "DOLBY DIGITAL" "DOLBY DIGITAL" and "PRO LOGIC" "DOLBY DIGITAL" and "PRO LOGIC" "DOLBY DIGITAL EX
  • Kenwood KRF-V6300D | User Manual - Page 33
    ], [SOUND], [LISTEN MODE], [ACTIVE EQ] and [TONE] will not be functional.) Adjust the speaker level with the controls of the DVD player. Refer to the Instruction manual of the DVD players for the detailed operating
  • Kenwood KRF-V6300D | User Manual - Page 34
    in the remaining places. PS (Program Service) Name Display Automatically displays the station name manual tuning. (With manual tuning, stereo broadcasts will be received in monaural.) ® Use [TUNING 1/¡] to select the station. "ST." lights when a broadcast is being received in stereo. 34 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 35
    numbers to RDS stations starting from preset number "1". Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations. See . MEMORY BAND TUNER œ Use [TUNER] to select the tuner
  • Kenwood KRF-V6300D | User Manual - Page 36
    program (genre) you want to listen to. Under certain receiving conditions, it may take more than 1 minute to complete the search. PTY MULTI CONTROL O/ 36 KRF-V6300D TUNING /Y Preparations • Execute the RDS auto memory procedure. • Set the broadcast band to FM. • Tune to an RDS station.
  • Kenwood KRF-V6300D | User Manual - Page 37
    DISP.] changes the contents of the display. Each press switches the display mode as follows: 1 PS (Program Service) name display 2 RT (Radio Text) display 3 Frequency display 1 PS (Program Service) name display: The station name is displayed automatically when an RDS broadcast is received. If no PS
  • Kenwood KRF-V6300D | User Manual - Page 38
    Usually use the "A-REC" (Auto record) mode. However, some discs often produce sound skipping. The "M-REC" (Manual record) mode should be used with such a disc. AUTO/MONO INPUT SELECTOR œ Use [INPUT SELECTOR] to select the some video software. This is due to the copy guard condition. 38 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 39
    Adjusting the sound MULTI CONTROL ACTIVE EQ ACTIVE EQ BASS BOOST TONE MULTI CONTROL O/ Adjusting the Tone ¶ Operation available only on the remote control unit. The tone level can be adjusted when the input signal is a PCM or analog signal and the listen mode of this unit is set to "Stereo". œ
  • Kenwood KRF-V6300D | User Manual - Page 40
    is changed. *2 Analog mode only *3 Dolby Digital and DTS mode only *4 Pro Logic II Music mode and Pro Logic IIx Music mode only 40 KRF-V6300D ∑ Use the [MULTI CONTROL ∞/5] to adjust the setting as desired. For detailed adjustment method, see the explanation of each item. To exit the sound
  • Kenwood KRF-V6300D | User Manual - Page 41
    Midnight mode ¶ Dolby Digital and DTS mode only When watching movies at night, you might not be able to raise the volume as loud as normal. Midnight mode compresses the dynamic range of previously specified heavy sound passage of the Dolby Digital and DTS mode sound track (like scenes with sudden
  • Kenwood KRF-V6300D | User Manual - Page 42
    indicators changes in 2 levels. To cancel Press [MUTE] again so that the "MUTE" indicator goes off. MUTE can also be deactivated by adjusting volume. 42 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 43
    CD/DVD] or [DVD/6CH] allows you to control the connected Kenwood DVD player with this remote control unit. é Press each key for DVD player operation. Refer to the operation manual of the DVD players for the detailed operating instructions. (To return to the receiver operation mode, press other Input
  • Kenwood KRF-V6300D | User Manual - Page 44
    Troubleshooting Troubles are not always due to malfunction or failure of the system. In case of a trouble, check the following tables before calling for service many possible causes for this problem, player, the sound is cut input mode is set to digital manual. Press the [INPUT MODE] KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 45
    range. 9 The remote control has not been changed to the operation Press the [CD/DVD] or [DVD/6CH] key to activate the mode for the Kenwood DVD player you wish to control. operation mode for the component you want to control before operation. 45 English
  • Kenwood KRF-V6300D | User Manual - Page 46
    Troubleshooting Resetting the Microcomputer The microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset . 46 KRF-V6300D
  • Kenwood KRF-V6300D | User Manual - Page 47
    power consumption less than 0.7 W Dimensions W: 440 mm (17-5/16") H: 159 mm (6-1/4 D: 372 mm (14-5/8") Weight (net 9.3 kg (20.5 lb) 1. Kenwood follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may
  • Kenwood KRF-V6300D | User Manual - Page 48
    For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model Serial Number
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
AUDIO VIDEO CONTROL CENTER
KRF-V6300D
INSTRUCTION MANUAL
© B60-5772-00/00 (E/ X)
Declaration of Conformity with regard to
the EMC Directive 2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands