Kenwood KRF-V6400D User Manual
Kenwood KRF-V6400D Manual
 |
View all Kenwood KRF-V6400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Kenwood KRF-V6400D manual content summary:
- Kenwood KRF-V6400D | User Manual - Page 1
AUDIO-VIDEO CONTROL CENTER KRF-V6400D KRF-V5450D INSTRUCTION MANUAL Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37 - Kenwood KRF-V6400D | User Manual - Page 2
AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE directly, notify your shipper immediately. Kenwood recommends that you retain the original the future. Keep this manual handy for future reference. that this battery contains lead. 2 KRF-V6400D/KRF-V5450D Maintenance of the unit When the - Kenwood KRF-V6400D | User Manual - Page 3
unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 6. Power Sources - to proper grounding of the mast and supporting structure, grounding of the lead-in (NEC SECTION 810-21) GROUND CLAMP POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART - Kenwood KRF-V6400D | User Manual - Page 4
Safety precautions 2 Unpacking 2 ¤IMPORTANT SAFETY INSTRUCTIONS 3 Contents 4 Special Features 5 How to read this manual 6 Names and functions of parts 7 for Kenwood DVD players 43 Troubleshooting Troubleshooting 44 Resetting the unit Glossary 46 Specifications 48 4 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 5
EX Dolby Pro Logic II Dolby Pro Logic IIx DTS Digital Surround DTS-ES DTS Neo:6 DTS 96/24 Multi Channel PCM KRF-V6400D KRF-V5450D ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ \ Easy Setup of the speaker The speaker settings can be completed by simply selecting the room type and the listening position - Kenwood KRF-V6400D | User Manual - Page 6
, Kenwood recommends manual, KRF-V6400D is used for the illustrations of front panel and rear panel. • The illustrations of the main unit display panel and the examples of operations are shown for the purpose of explanation and may differ from the actual view or operation. 6 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 7
. § $ BAND key ‹ Press to select the broadcasting band. % AUTO/MONO key ‹ Press to switch the radio tuning mode between auto tuning and manual tuning. ^ STRAIGHT DECODE key ª Press to switch the STRAIGHT DECODE mode ON/OFF. & DIMMER key w Press to switch the brightness of the display - Kenwood KRF-V6400D | User Manual - Page 8
518 8 KRF-V6400D/KRF-V5450D 1 AUTO MEMORY key › Use for auto memory of RDS and FM radio stations. AUDIO key Use to operate the Kenwood DVD player manual tuning. 7 key Use to operate the Kenwood DVD player.* 0 P.CALL 4/¢ keys Press to recall a preset radio station. fl Use to operate the Kenwood - Kenwood KRF-V6400D | User Manual - Page 9
£ Input source keys Press to select the input source. • * For how to be able to use the keys to operate the Kenwood DVD player, see . e Operation Operate the remote control unit by pointing it to the remote sensor of this unit. When this unit is - Kenwood KRF-V6400D | User Manual - Page 10
is on. MUTE Blinks when muting is on. CLIP Lights up when the input level is too high. Listen mode/Input signal format indicators 10 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 11
components, be sure to refer to the instruction manuals supplied with the components you are connecting. have been made properly, reset the microcomputer by referring to . t ¤ other speakers. • KRF-V5450D : Up to two subwoofers can be connected to KRF-V5450D. See - Kenwood KRF-V6400D | User Manual - Page 12
incoming video signal is different from that of the TV, no video is output. In this case, adjust the resolution on the connected component. 12 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 13
Connecting a TV Monitor 1 Connect the TV monitor by selecting one of the desired method from connections A or C shown below. For the video and audio connections of the connected component, see the description on the page for the connected components. 2 To output the audio of the TV monitor from the - Kenwood KRF-V6400D | User Manual - Page 14
Connecting a CD player 1 Connect the audio line: Connection B (digital) or A (analog). Connections A B AUDIO OUT OPTICAL OUT CD player 14 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 15
Connecting a DVD player 1 Connect the audio line: Connection B (digital) or A (analog). 2 Connect the video line: Connection C. 3 Connect the TV monitor. Connect as shown in #. Connections A BC AUDIO OUT COAXIAL DIGITAL VIDEO OUT (Analog) OUT (AUDIO) DVD player • - Kenwood KRF-V6400D | User Manual - Page 16
player and/or TV monitor have the HDMI terminals, it is recommended to use the HDMI connection. (See @.) 16 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 17
Connecting an audio player Connections AUDIO OUT Cassette deck and etc. Connecting to the [AV AUX] jacks A component that is usually not connected to this unit, such as a portable video camera, can be connected to the [AV AUX] jacks on the front panel of this unit. VOLUME CONTROL PURE AUDIO MODE - Kenwood KRF-V6400D | User Manual - Page 18
Connecting speakers Connections KRF-V6400D KRF-V5450D Powered Subwoofer Right Left Front speakers Center speaker Surround Back speaker Right imaging. Be sure to connect the speakers correctly. • KRF-V5450D : Subwoofer sound comes out at the both Subwoofer terminals (SPEAKERS and - Kenwood KRF-V6400D | User Manual - Page 19
Connections How to connect the wire to terminals (Screw type terminal) (KRF-V6400D only) 1 Strip the vinyl coating of the wire by a length of about 1 cm. 2 Loosen the knob. How to connect the wire to terminals (Push - Kenwood KRF-V6400D | User Manual - Page 20
made unless the antennas are connected. Connect the antennas correctly as instructed below. FM indoor antenna Fix on a wall, etc. . Insert until the metallic conductor becomes invisible. 4 Release the lever. 20 KRF-V6400D/KRF-V5450D 2 Fix the antenna on the wall. FM outdoor antenna Lead the 75Ω - Kenwood KRF-V6400D | User Manual - Page 21
Connections Turning this unit ON RECEIVER 1 After completing all of the necessary connections, connect the power cord to a wall power outlet. The standby indicator on the front panel lights red to indicate the standby mode. 2 Press the [ (Power)] key of this unit or the [ RECEIVER] key of the - Kenwood KRF-V6400D | User Manual - Page 22
can set only the 5.1 channel system. For KRF-V6400D : If the setup for 6.1-channel system is required, go through . • Surround Back speaker : KRF-V6400D only • Subwoofer Re-mix: Mixes the bass tone of other channels to the subwoofer channel. 22 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 23
your listening room. For creating the best listening environment, Kenwood recommends to perform the setup at the listening position. "CNTR OFF" "SURR LRG" "SURR NML" "SURR OFF" "BS LRG" Surround Back speaker (KRF-V6400D only) "BS NML" Subwoofer Re-mix*1 "BS OFF" "RMX ON" "RMX OFF" Setting - Kenwood KRF-V6400D | User Manual - Page 24
∞/5] and adjust the volume of the test tone. When you finish adjusting, press [SETUP]. If you select "MANUAL" : Use [MULTI CONTROL ∞/5] to adjust its volume level and press [SETUP]. You will hear the test of 0.3 to 9.0 meters (1 to 30.0 ft) in 0.3-meter (1-feet) increments. 24 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 25
CONTROL ∞/5] to select the LFE level. [SETUP] The level is adjusted from 0dB to -10dB in1dB step decrements. 3 Go to the next setting. Lip Sync (KRF-V6400D only) If the monitored video is delayed in time with respect to the audio from the speakers, the audio output timing can be delayed - Kenwood KRF-V6400D | User Manual - Page 26
Use [MULTI CONTROL ∞/5] to select an item to set. [HDMI SETUP] Display "AUDIO OUT" "LIP SYNC" (KRF-V6400D only) "LINK SET" "POWER CONTROL"*1 "EXIT" Setting Sets the HDMI audio output destination. Adjusts the deviation in . • If "TV" is selected, adjust the volume on TV. 26 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 27
Setup Lip Sync (KRF-V6400D only) If the monitored video is delayed in time with step. 3 Go to the next setting. • If the TV in use is not compatible with "AUTO", select "MANUAL". [HDMI SETUP] Display "LINK ON" "LINK OFF" Setting The HDMI control functions are used. The HDMI control functions - Kenwood KRF-V6400D | User Manual - Page 28
to be played. When in DVD, VIDEO or CD input source Display "AUTO" "MANUAL" "ANALOG"*1 Setting The digital and analog inputs are switched automatically according to the input signal a result of change in the input signal while "MANUAL" is selected, press [LISTEN MODE]. 28 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 29
Playing music or movie Playback VOLUME CONTROL INPUT SELECTOR AV AUX Monitoring the input source in the original sound (STRAIGHT DECODE mode) The signal input from a source can be output directly without any sound field effect added to it. VOLUME /o Input source keys 1 Select a source. Use the - Kenwood KRF-V6400D | User Manual - Page 30
MODE] or [STRAIGHT DECODE] key is operated. • The video other than the HDMI input video cannot be monitored when PURE AUDIO MODE is selected. 30 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 31
best condition, it is required to set up the speakers in advance. 6.1ch surround sound system 5.1ch surround sound system 2ch stereo sound system (KRF-V6400D only) TV / SCREEN L SW C R TV / SCREEN L SW C R TV / SCREEN L R LS RS LS RS BS Listen mode · Dolby Digital EX · Dolby Pro Logic - Kenwood KRF-V6400D | User Manual - Page 32
of input channels, the display will switch back to the input source name. • This function is not available when in Tuner source. Surround effects 32 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 33
/MONO] to select the tuning method. Each press switches the tuning method as follows: Setting Auto tuning Manual tuning Operation The next station is tuned automatically. Select a station manually. Indicator "AUTO" lit "AUTO" not lit Normally, set to "AUTO" (auto tuning). If the radio waves are - Kenwood KRF-V6400D | User Manual - Page 34
in the preset memory, regular FM stations will be stored in the remaining places. PS (Program Service) Name Display Automatically displays the station name transmitted by the RDS station. PTY (Program TYpe) be replaced by the RDS stations.) Listening to radio broadcasts 34 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 35
RDS stations starting from preset number "1". Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations. See . MEMORY Receiving preset stations Numeric keys MULTI CONTROL - Kenwood KRF-V6400D | User Manual - Page 36
Music Folk Music Documentary Display "WEATHER" "FINANCE" "CHILDREN" "SOCIAL" "RELIGION" "PHONE IN" "TRAVEL" "LEISURE" "JAZZ" "COUNTRY" "NATION M" "OLDIES" "FOLK M" "DOCUMENT" Listening to radio broadcasts 36 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 37
DISPLAY] changes the contents of the display. Each press switches the display mode as follows: 1 PS (Program Service) name display 2 RT (Radio Text) display 3 Frequency display 1 PS (Program Service) name display The station name is displayed automatically when an RDS broadcast is received. If no PS - Kenwood KRF-V6400D | User Manual - Page 38
the level of "TREB" (high frequencies). Use [MULTI CONTROL ∞/5] to adjust the level. [TONE] The level is adjusted from -10 to +10. Sound adjustment 38 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 39
Adjustments according to the playing source The audio can be adjusted as desired according to the source being played. MULTI CONTROL SOUND Speaker level adjustment The output level from the desired speaker channels can be fine adjusted according to the properties of each source. The adjustment is - Kenwood KRF-V6400D | User Manual - Page 40
audio is distributed to the front left and right speakers. • This setup is not available when the center speaker setup is "OFF". Sound adjustment 40 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 41
Sound adjustment Center image ¶ DTS Neo:6 Music mode only The output level of the center speaker can be adjusted. 1 Press [SOUND] repeatedly to select "CENTER IMAGE". 2 Use [MULTI CONTROL ∞/5] to adjust the center speaker output. More part of the center channel audio is distributed to the front - Kenwood KRF-V6400D | User Manual - Page 42
" indicator blinks. To cancel Press [MUTE] again so that the "MUTE" indicator goes off. MUTE can also be deactivated by adjusting volume. Convenient functions 42 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 43
DVD player. Pressing [DVD] allows you to control the connected Kenwood DVD player with this remote control unit. 3 Press each key for DVD player operation. Refer to the operation manual of the DVD players for the detailed operating instructions. (To return to the receiver operation mode, press other - Kenwood KRF-V6400D | User Manual - Page 44
source, the sound is There are many possible causes for this problem, cut off soon after it starts. depending on the player used the video player component to NTSC/PAL. Refer to the instruction manual of the video player component. If PURE AUDIO MODE is Troubleshooting 44 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 45
] key to activate the operation mode for the mode for the Kenwood DVD player you wish to control. component you want to control before the display is not normal or a problem cannot be solved even after checking the list in , it is required to reset the the unit. While holding down [ - Kenwood KRF-V6400D | User Manual - Page 46
Dolby Digital Digital multi-channel audio standard developed by Dolby Laboratories. It supports transmission and recording of highquality digital audio signals from monaural up to in the monitor by detecting the delay of monitored video automatically. Troubleshooting 46 KRF-V6400D/KRF-V5450D - Kenwood KRF-V6400D | User Manual - Page 47
contents. It is used in encryption of digital interfaces such as DVI and HDMI. "x.v.Color" and "x.v.Color" logo are trademarks of Sony Corporation. 47 English Troubleshooting - Kenwood KRF-V6400D | User Manual - Page 48
440 mm (17-5/16 H: 159 mm (6-1/4 KRF-V6400D D: 372 mm (14-5/8 KRF-V5450D D: 362 mm (14-1/4") Weight (net 9.5 kg (20.9 lb) • Kenwood follows a policy of continuous advancements in development. whenever you call upon your dealer for information or service on this product. Model Serial Number
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
AUDIO-VIDEO CONTROL CENTER
KRF-V6400D
KRF-V5450D
INSTRUCTION MANUAL
© B60-5810-08/00 (E/X)
Declaration of Conformity with regard to
the EMC Directive 2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands