Home » KitchenAid Manuals » Ranges » KitchenAid KERS202BSS » Manual Viewer

KitchenAid KERS202BSS Installation Guide

KitchenAid KERS202BSS Manual

View all KitchenAid KERS202BSS manuals

Add to My Manuals
Save this manual to your list of manuals

KitchenAid KERS202BSS manual content summary:

KitchenAid KERS202BSS | Installation Guide - Page 1
INSTALLATION INSTRUCTIONS 30" (76 CM) FREESTANDING ELECTRIC RANGES Table of Contents RANGE SAFETY 2 INSTALLATION REQUIREMENTS 3 Tools and Parts 3 Location Requirements 3 Electrical Requirements - U.S.A. Only 5 INSTALLATION INSTRUCTIONS 6 Unpack Range 6 Install Anti-Tip Bracket 6 Electrical
KitchenAid KERS202BSS | Installation Guide - Page 2
RANGE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual anti-tip bracket if range is moved. Do not operate range without anti-tip bracket installed and engaged. Failure to follow these instructions can result in death
KitchenAid KERS202BSS | Installation Guide - Page 3
parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools needed ■ Tape measure ■ Masking tape ■ Flat-blade screwdriver ■ ¼" drive ratchet ■ Phillips screwdriver ■ Level ■ Hammer ■ Hand or electric by installing a range hood that projects
KitchenAid KERS202BSS | Installation Guide - Page 4
E. 25 64.3 cm) depth - back of range to front of cooktop** F. Model/serial rating plate (located on the frame behind a top corner of the door or either side of the drawer) IMPORTANT: Range must be level after installation. Follow the instructions in the "Level Range" section. Using the cooktop as
KitchenAid KERS202BSS | Installation Guide - Page 5
electrical connection you will be using and follow the instructions provided for it here. ■ Range must be connected to the proper electrical voltage and frequency as specified on the model/serial rating plate. The model range can be moved if servicing is ever necessary. 3-wire receptacle (10-50R) 5
KitchenAid KERS202BSS | Installation Guide - Page 6
INSTRUCTIONS Unpack Range WARNING Excessive Weight Hazard Use two or more people to move and install range. Failure to do so can result in back or other injury. 1. Remove shipping materials, tape and film from range. 2. Remove oven racks and parts package from inside oven. 3. Do not remove
KitchenAid KERS202BSS | Installation Guide - Page 7
Move range close enough to opening to allow for final electrical connections. Remove shipping base, cardboard or hardboard from under range. 7. Move range into range forward onto shipping base, cardboard or hardboard to continue installing the range using the following installation instructions.
KitchenAid KERS202BSS | Installation Guide - Page 8
screws located on the back of the range. Pull cover down and toward you to remove cover from range. Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge copper or 6 gauge aluminum wire. Electrically ground range. Failure to follow these instructions can result in death, fire, or
KitchenAid KERS202BSS | Installation Guide - Page 9
Part of metal ground strap must be cut out and removed. 5. Complete installation following instructions for your type of electrical power supply cord through the strain relief on the cord/conduit plate on bottom of range. Allow enough slack to easily attach the wiring to the terminal block. A B
KitchenAid KERS202BSS | Installation Guide - Page 10
6. Replace terminal block access cover. Direct Wire Installation: Copper or Aluminum Wire This range may be connected directly to the fuse disconnect or circuit breaker box. Depending on your electrical supply, make the required 3-wire or 4-wire connection. 1. Strip outer covering back 3" (7.6 cm
KitchenAid KERS202BSS | Installation Guide - Page 11
1. Part of metal ground strap must be cut out and removed. A B C A. Metal ground strap B. Discard C. Ground-link screw 2. Use a Phillips screwdriver to remove the ground-link screw from the back of the range. Save the ground-link screw and the end of the ground link under the screw. 3. Pull the
KitchenAid KERS202BSS | Installation Guide - Page 12
. Slide the range forward and determine if there is an obstruction between the range and the mounting wall. If you need assistance or service, refer to the "Assistance or Service" section of the Use and Care Guide, or the cover or "Warranty" section of the User Instructions, for contact information
KitchenAid KERS202BSS | Installation Guide - Page 13
without anti-tip bracket installed and engaged. Please reference the "Assistance or Service" section of the Use and Care Guide, or the cover or "Warranty" section of the User Instructions, to contact service. Level Range Determine if you have AquaLift® Technology or Steam Clean by referring to the
KitchenAid KERS202BSS | Installation Guide - Page 14
IMPORTANT: If the range control displays an "F9" or "F9, E0" error code, the electrical outlet in the home may be miswired. Contact a qualified electrician to verify the electrical supply. ■ See the "Troubleshooting" section in the Use and Care Guide or User Instructions. When the range has been on
KitchenAid KERS202BSS | Installation Guide - Page 15
instructions can result in death or serious burns to children and adults. When moving range, slide range onto cardboard or hardboard to avoid damaging the floor covering. If removing the range range is level. Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels
KitchenAid KERS202BSS | Installation Guide - Page 16
W10403811C ®/™ ©2012 Whirlpool. All rights reserved. 8/12 Printed in U.S.A.