Konica Minolta AccurioPress 6272P AccurioPress 6136/6136P/6120 Auto Inspection
Konica Minolta AccurioPress 6272P Manual
View all Konica Minolta AccurioPress 6272P manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta AccurioPress 6272P manual content summary:
- Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 1
- Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 2
and symbols used in this manual 7 CAUTION - This symbol indicates that negligence of the instructions may lead to mishandling that , or of User's Guide. This guide describes product names and system configurations as follows. Product name Conventions used in this guide AccurioPress 6136 / 6136P - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 3
in PDF 4-14 Overview ...4-14 5 Real-time Inspection Display 5.1 Confirming the Inspection Result in Real Time 5-2 Procedure ...5-2 6 Reference Image 6.1 Managing Reference Images ...6-2 Automatic Inspection Operation Manual Contents-1 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 4
(Uploading a CSV File) ...8-19 Procedure (Holding a Print Job before Execution 8-20 Procedure (Checking the Collation Result after Printing 8-20 9 Troubleshooting 9.1 If an Out-of-Range Image is Detected 9-2 Out-of-range image report status and remedy 9-2 Automatic Inspection Operation - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 5
1 Overview of Function - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 6
power switch of this machine, you do not need to turn OFF the power switch of the Auto Inspection Unit UK-301. Automatic Inspection Operation Manual 1-2 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 7
of the Auto Inspection Unit UK-301. For details on the default administrator password, refer to [Safety Information] in the separate volume. Automatic Inspection Operation Manual 1-3 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 8
2 Automatic Inspection Setting - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 9
value for the number of detected errors is set to "0", this machine will not stop even if the number of detection increases. Automatic Inspection Operation Manual 2-2 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 10
the detection standard. You can also set the detection standard of [Custom]. For details, refer to "2.1.2 [Automatic Inspection Level Setting]" in this manual. Set the automatic inspection on the Wait screen. When outputting a print job for Direct Print and such without temporarily saving it, input - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 11
detected. [Paper Noise Removal Level] Range: 1(Strong) - 7(Weak) Adjusts the level to exclude noises originating from paper itself from the detection target. Automatic Inspection Operation Manual 2-4 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 12
Auto Inspection Unit UK-301. Specify the line speed of the Auto Inspection Unit UK-301. Adjust to suit your network environment. Automatic Inspection Operation Manual 2-5 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 13
the detection report memory of the Auto Inspection Unit UK-301. Tips - If available memory space runs out, the job may be stopped. Follow the instruction shown in [Available Capacity Recovery Method] to increase the amount of available memory space. Automatic Inspection Operation - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 14
a reference image is displayed. To enable UK HDD encryption, delete all of the reference images and uncreated automatic inspection reports in advance. Automatic Inspection Operation Manual 2-7 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 15
below. - [Utility] - [Administrator Setting] - [Network Setting] - [NIC Settings] - [Detail Settings] - [Status Notif. Setting] - [Register Notif. Address] - [E-mail] - [ON] - [Notification Items] - [Auto Inspection] Automatic Inspection Operation Manual 2-8 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 16
Specify whether to allow log storage when a service call occurs.To allow logs, specify whether to log storage when a service call occurs. The stored logs are used to help the service representative's work. Specify problem even if the image attracts someone's attention. Automatic Inspection Operation - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 17
reference chart. - Inspection chart: The inspection chart includes dots in the table. Tips - For details on how to obtain automatic inspection test charts, contact your service representative. Automatic Inspection Operation Manual 2-10 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 18
, refer to "2.1 Presetting the Details of Automatic Inspection" in this manual. In this step, configure the following settings. [Automatic Reprint when Creating a New Reference Image for Automatic Inspection" in this manual. 4 Perform automatic inspection using the reference image created in - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 19
Level 2 5 Check the automatic inspection report. Check the report following the procedure described in "4.1 Confirming the Automatic Inspection Report" in this manual. Check whether the levels specified in step 2 match the values framed in red. NOTICE The result of automatic inspection may vary - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 20
3 Performing Automatic Inspection - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 21
PS-Plugin driver. For details on how to hold a job, refer to [Job Management] in the HTML User's Guide. 2 Press [JOB LIST] on the [MACHINE] screen to display the [Hold Job] screen. 3 Select the held ] window opens. 5 Set [Inspection Setting] to [ON]. Automatic Inspection Operation Manual 3-2 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 22
on the output purpose. 8 Press [New Store] or [Overwrite]. The setting is stored, and the display returns to the [Hold Job] screen. Automatic Inspection Operation Manual 3-3 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 23
Area], we recommend that you create a reference image in [Sample Output]. For details on the [Automatic Inspection Area], refer to "7. Automatic Inspection Area" in this manual. Then, follow the procedure described in "3.2 Selecting the Created Reference Image for Automatic Inspection" in this - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 24
3.1 Creating a New Reference Image for Automatic Inspection 3 Automatic Inspection Operation Manual 3-5 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 25
PS-Plugin driver. For details on how to hold a job, refer to [Job Management] in the HTML User's Guide. 2 Press [JOB LIST] on the [MACHINE] screen to display the [Hold Job] screen. 3 Select the held ] window opens. 5 Set [Inspection Setting] to [ON]. Automatic Inspection Operation Manual 3-6 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 26
] when printing is finished, select [Delete at the End]. In [Inspection Level Setting], specify the desired level depending on the output purpose. Automatic Inspection Operation Manual 3-7 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 27
function, set Inspection Excluding Area by reference; you can perform automatic inspection. For details, refer to "7. Automatic Inspection Area" in this manual. - To display [Change Level], press Stop on the control panel during printing. You can change the inspection level. Automatic Inspection - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 28
3.2 Selecting the Created Reference Image for Automatic Inspection 3 Tips - The reference image can also be selected using AccurioPro Print Manager. Automatic Inspection Operation Manual 3-9 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 29
is displayed on the control panel. % For details on the wait output procedure, refer to the HTML User's Guide. 2 Press [Create Reference Image], and enter [Number of Ref. Image Pages]. 3 Press Start on the control the inspection level setting as needed. Automatic Inspection Operation Manual 3-10 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 30
Result]. The [Automatic Inspection Report] can be viewed on this machine or in Web Utilities of the Auto Inspection Unit UK-301. Automatic Inspection Operation Manual 3-11 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 31
on the control panel. % For details on the wait output procedure, refer to the HTML User's Guide. 2 Press [Change Setting] under [Reference Image/Area Setting]. The [Reference Image Selection] screen is Utilities of the Auto Inspection Unit UK-301. Automatic Inspection Operation Manual 3-12 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 32
4 Automatic Inspection Report - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 33
To create [AutoInspect.Report], enable [Create Auto Inspection Report] before performing automatic inspection. To display [AutoInspect.Report], configure [Automatic Inspection NIC Setting]. Automatic Inspection Operation Manual 4-2 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 34
] and [Password] that are stored, press [Web Browser] on the [MACHINE] screen, select [Menu] - [Setting] - [Setting], and press [Delete] in [Machine Data 2]. Automatic Inspection Operation Manual 4-3 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 35
Auto Inspection Unit UK-301 reaches 100%, no report is created. Select an unnecessary report, and press [Delete] to delete such a report. Automatic Inspection Operation Manual 4-4 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 36
range] screen. % For details on Automatic Inspection Report, refer to "4.3 Viewing the report via Web Utilities of the Auto Inspection Unit UK-301" in this manual. Automatic Inspection Operation - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 37
stains are displayed. Displays the stain level (n). For details on the stain level, refer to "2.1.2 [Automatic Inspection Level Setting]" in this manual. XXX: Serial No. Indicates the total number of detected omissions. Up to 20 omissions are displayed. Displays the omission level (n). XXX: Serial - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 38
system failed in alignment with the reference image. Displayed when the system failed to create a report. Displayed when many stains were detected. Automatic Inspection Operation Manual 4-7 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 39
Web Utilities, refer to [Web Utilities] in the HTML User's Guide. 2 Enter the following URL in the address bar and press operation contents and [Extension for maintenance] of the menu for a service engineer (CE) are displayed on the top page of Web Utilities. Inspection Operation Manual 4-8 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 40
1,000 pages can be created as a report. If the number of pages exceeds 1,000, the excess is divided into another PDF file. Automatic Inspection Operation Manual 4-9 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 41
inspection standard. If you view a report via Web Utilities of the Auto Inspection Unit UK-301, the problem part is framed in red, and the reason is displayed. [Decoding result] Shows a report of the used for printing. Displays the inspection level. Automatic Inspection Operation Manual 4-10 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 42
] Displays the items specified in [Automatic Inspection Level Setting]. For details, refer to "2.1.2 [Automatic Inspection Level Setting]" in this manual. Name [Stain Detection Level] [Paper Noise Removal Level] [Image Edge Detection Sensitivity] [Permission Level for Stain] Description Displays - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 43
Error by Each Level] to On. For details on the procedure, refer to "2.1.1 About the Detailed Setting of Automatic Inspection" in this manual. Name [Stain Deteciton Level] [Permission Level for Stain] Description Displays the detected stains for each level according to their size. Displays the - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 44
via Web Utilities of the Auto Inspection Unit UK-301 4 Out of range The part related to the problem is framed in red, and details are displayed as shown below. Name [Stain(XXX)] [Level(X)] lateral position, and "y" indicates the vertical position.) Automatic Inspection Operation Manual 4-13 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 45
enclose image failures such as stains or omissions. Sets the color of the frame to enclose a number or bar code reading error. Automatic Inspection Operation Manual 4-14 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 46
5 Real-time Inspection Display - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 47
For details on the browser operating environment of Web Utilities, refer to [Web Utilities] in the HTML User's Guide. 2 Enter the following URL in the address bar and press [Enter]. "http:// - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 48
6 Reference Image - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 49
[InspectionAreaSet.] Specify the inspection area of the selected reference image. For details, refer to "7. Automatic Inspection Area" in this manual. [MultipleSelect] Select multiple reference images. When multiple reference images are selected, you cannot move the list or set the inspection - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 50
6.1 Managing Reference Images 6 Tips You can also confirm the reference images from [Reference Image List] of Web Utilities of the Auto Inspection Unit UK-301. Automatic Inspection Operation Manual 6-3 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 51
7 Automatic Inspection Area - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 52
[Select Area Type], sequential check can be set. For details, refer to "8.4 Performing Sequential Check for the Barcode Area or Serial No. (0-9) Area" in this manual. Automatic Inspection Operation - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 53
level to the specified area. For details on how to set the automatic inspection level, refer to "2.1.2 [Automatic Inspection Level Setting]" in this manual. 7.2 Setting an Inspection Area Set an area that is not subject to automatic inspection, or set an area that is subject to special inspection - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 54
an inspection area from [InspectionAreaSet.] on the [Reference Image List] screen of Web Utilities. 2 Set the inspection area on the setting screen. Automatic Inspection Operation Manual 7-4 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 55
"2.1.1 About the Detailed Setting of Automatic Inspection" in this manual. Configure the setting to inspect whether the serial number or Select Area Type]. This function is optional. For details, contact your service representative. Changes the display magnification of the target side in the range - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 56
Page 1 Area No.1 1 Front Page 2 Area No.1 2 Page 3 Area No.1 3 Page N Area No.1 N Area No.1 1 Back Area No.1 2 Area No.1 3 Area No.1 N Automatic Inspection Operation Manual 7-6 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 57
8 Output Setting - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 58
output to the Purge Tray to ensure the page order of the printout remains as intended. - Example shown in this manual Image beyond standard Purge Reprint instruction UK-301 Image within Finisher standard RU-702 IQ-501 panel This example describes a system configuration to output a printout - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 59
[Continue Output] in [Operation after Deviation/Out of Range was Detected], and enter [Detec- tion Count] using the keypad on the screen. Automatic Inspection Operation Manual 8-3 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 60
[Output Tray for Out of Range]. 4 Press [OK]. 5 Automatic inspection and printing are performed. For details, refer to "3. Performing Automatic Inspection" in this manual. If an error is detected during printing, the printout subject to the detected error and paper left in the machine at the same - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 61
setting is available if you want to reduce paper loss or use paper remaining in the machine at the same time. - Example shown in this manual Image beyond standard Image within standard Finisher Mixed RU-702 UK-301 IQ-501 panel In this example, a normal printout and a printout with an error - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 62
is continued even if an error is detected multiple times. 3 Select [Same as the Job] of [Output Tray for Out of Range]. Automatic Inspection Operation Manual 8-6 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 63
to the same tray as a normal printout. 8 Check the automatic inspection report. For details, refer to "4. Automatic Inspection Report" in this manual. 9 Check the printout. Check the actual printout based on the information in the automatic inspection report, and take the appropriate action as - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 64
Kit VI-513 Procedure (Creating a Reference Image) 1 Press [IQ Function Setting] on the [MACHINE] screen. The [IQ Function Setting] screen is displayed. Automatic Inspection Operation Manual 8-8 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 65
in the [Workflow] tab of the PS Plug-in driver. % For details on how to hold a job, refer to [Job Management] in the HTML User's Guide. 4 Press [JOB LIST] on the [MACHINE] screen to display the [Hold Job] screen. Automatic Inspection Operation - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 66
in [Reference Image Management] - [Reference Image List 1] on the [MACHINE] screen. For details, refer to "6.1. Managing Reference Images" in this manual. % If you want to recreate a reference image as the result of checking the contents, execute steps 1 to 7 again. Automatic Inspection Operation - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 67
]. % Enter the numeric value, or use the mouse to drag the inspection area to set it. 7 Press [Enter]. Area Setting is completed. Automatic Inspection Operation Manual 8-11 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 68
(Setting an Inspection Area)". % For details on the procedure, refer to "3.2. Selecting the Created Reference Image for Automatic Inspection" in this manual. 5 Press [Output]. 6 Press [Normal] in [Output Method], and press [OK]. Printing starts, and data in the inspection area is decoded from - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 69
view the automatic inspection report, refer to steps 1 to 5 in "4.3 Viewing the Report via Web Utilities of the Auto Inspection Unit UK-301" in this manual. 8 Click [Report] of the printed job, and click the file name of [Decoding result] on the displayed screen. The CSV file of the decoding result - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 70
, referring to "Procedure (Creating a Reference Image)" of "8.3 Decoding the Barcode Area or Serial No. (0-9) Area to Check the Contents" in this manual. Procedure (Setting an Inspection Area) 1 Set the inspection area, referring to steps 1 to 8 in "Procedure (Setting an Inspection Area)" of "8.3 De - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 71
(only within the same area)] Check whether the number set in each area No. has been changed correctly between pages. 3 Press [Complete]. Automatic Inspection Operation Manual 8-15 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 72
Barcode Area or Serial No. (0-9) Area to Check the Contents" in this manual. 2 Confirm the downloaded CSV file data. Setting item [Check the data sheet are arranged in the order of "3" to "4", so there is no problem. • The decoding results for each area No. are arranged sequentially between sheets. - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 73
) 1 Check that the collated CSV file is formatted as shown below. CSV file No. Name 1 Setting Quantity 2 JobName Automatic Inspection Operation Manual Description Number of setting items related to the entire job. Select the required items from the following: JobName and Ascending or - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 74
2D code) Expected decoding result. If the read value matches this value, it is assumed that there is no problem. * Enter a UTF-8 character string such as and space, excluding a comma (,). * If the value is Set in the range from 1 to 488 (units of 1 mm). Automatic Inspection Operation Manual 8-18 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 75
For details on the browser operating environment of Web Utilities, refer to [Web Utilities] in the HTML User's Guide. 2 Enter the following URL in the address bar and press [Enter]. "http:// - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 76
Selecting the Created Reference Image for Automatic Inspection" in this manual. Tips - The settings related to the automatic inspection are operating environment of Web Utilities, refer to [Web Utilities] in the HTML User's Guide. 2 Enter the following URL in the address bar and press [Enter]. "http - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 77
8.5 Variable Data Inspection Function 8 3 Click [List of Realtime Collation Result]. The List of Realtime Collation Result screen is displayed. 4 If the inspection result is [Collation Err], click [Report]. The Mismatch Report screen is displayed. Automatic Inspection Operation Manual 8-21 - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 78
9 Troubleshooting - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 79
9 Troubleshooting 9.1 [Machine Management] in the HTML printouts. User's Guide. 2 A comment marked by a The inspection details, refer to "7. Automatic In- spection Area" in this manual. A large stain is found on an image. If any problems are identified, create a reference - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 80
] in the HTML marked by a red circle is User's Guide. not displayed.) Message "Position Error (Scan)" is displayed as refer to "7. Automatic Inspection Area" in this manual. Message "CSV Unfit" is displayed as error the reference image. If no problems are the control panel. ence image - Konica Minolta AccurioPress 6272P | AccurioPress 6136/6136P/6120 Auto Inspection - Page 81
A9JT-IQ-E-11 © 2020 2020.10